REPAIRS TO DRAIN FENCING HARDSTANDING PATH KERB STONES BOUNDARY WALL ETC IN ZONE B AT NDA KHADAKWASLA

Amount

Demolition of concrete of any description and in any position not otherwise specifically provided for

Removing demolished cement concrete material exc 1.5 Km but n.exc 5 Km and incl removal of the same out side MD land and deposited at location specified by local municipal authorities

M&L providing precast cement concrete type B1 (1:2:4) (Using 20 mm graded stone aggregate) as in kerb stones , window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, columns, posts,pier caps, boundary pillars, bed plates, pintle blocks,anchorage blocks, bonders (for stone walling) corbles, brackets etc., (of any section indicate), with plain fair faces is, weatherings, throating etc., and setting in CM (1:4) complete with joints to match all as specified and directed.

M & L for applying of primer two or more coat and two coat of synthetic enamel paint including preparation of new surfaces of concrete exc 10 cm width or girth complete all as specifed and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed

M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (Using 20 mm graded stone aggregate), exc. 10 cm in width and setting in CM (1:4), complete.

M&L for PCC (1:3:6) type C2 (Using 40mm graded stone aggregates) as in surface channels and drains

M&L for providing plain cement concrete (1:4:8) type D2 (Using 40mm grade aggregate) as in sub base all as specified and directed

Extra for forming fair finished drain or channel girth not exc 30cm in cement concrete using extra cement including form mounds etc complete all as specified.

Taking down cement plaster on brick, stone walls, etc., incl racking out joints, hacking for key, scrubbing down with water, etc.

M&L for15mm thick rendering in CM (1:6) on concrete surfaces finished even & smooth w/o using extra cement

M&L for cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in cills,steps,seismic and other similar works plinth course,coping benching, bed plate etc complete all as specified.

Dismantling floor, hearth or wall tiling/ chequered tile/interlocking tile including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade of triangular / Zigzag / Haxagone/ I , in shape or shap and designer as approved, with grey cement and pigment , laid over and including a layer of 50 mm thick sand cushion including filling the joints with sand , as in floors/ paths/ pavings etc, complete all as specified and directed.

Ditto all as per item No. 14 above but except tiles

M &L for chequered cement concrete tiles (rubber moulded type) 200x200x50mm or 300 mm x300mmx25mm thick or size and shape matching with exixsting set jointed with grey cement and pigment and pointed in neat cement slurry including 15 mm thick screed bed of CM(1:6) in floors complete all as directed

Ditto all as per item No. 16 above but except tiles

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed.

M&L for 30 to 40 mm thick sahabad stone flooring bedded and jointed in cement mortar 1:6 and pointed in CM (1:3) complete all as directed.

Ditto all as per item 19 above but except stone

M&L for 75 mm thick plain cement concrete type D2 using 40mm graded stone aggregate (1:4:8) as in sub base or simillar works all as specified and directed

M&L for 8 to 10 mm thick Dholpur stone/tiles,(superior quality) machine cut, in skirting/ dado, and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of tiles, size of tiles laid over and incl provn of 15 mm thick backing coat in CM (1:4) as specified and directed

M & L for 18 to 20 mm thick granite stone slab (of any type ) work (table rubbed and polished ) as in floor, steps,, jambs, pillars, window cills, cooking platforms, platform in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and making good for disturbed surfaces and chamfering for exposed edges,surfaces fixed in repairs all as directed . (Colour decided by Engineer-in-Charge)

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for

M & L for precast RCC (1:2:4) type B-1 (Using 20 mm graded crushed stone aggregate) as in cover slabs set in cement mortar (1:4) complete all as dspecified and as directed . (Note : Reinforcement to be measured and paid separately).

M&L for RCC nominal mix using PCC (1:2:4) ty B1(using 20mm graded agregates) as in beams, cantilevers, bressummers, lintels over 1.5 m span

Use and waste of formwork to sides and soffits of floor or roof beam, lintels,cantilevers etc,rough finished surfaces of pillars,posts, strut, piers, columns and stanchions ,rough finished surface

M&L for TMT Bars 10mm dia and over cut tolength bent to shape required uncl cranking bending and spirally for hooping for colums hooking ends and binding with ms wire n. less than .9mm dia

Ditto all as per item No. 28 above but 6 to 8 mm dia

S&F in repairs precast cement concrete PCC (1:2:4) ty B0(using 12.5mm graded agregates) louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame set in CM (1:6).

M&L for preparation of newly plastered wall surfaces , RCC jallies and applying two coats of Cement based paint

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for preparing new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling fencing wire mesh,any type

S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc .wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming

S&F ornamental intricate framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work Note: The fabricated designer articles like arrows and similar wk shall be paid as per weight.

S&F expanded metal, cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members n exc 4kg per sqm

Ditto as per item No 38 above but fixing only

S&F Welded steel wire fabric supplied and fixed complete to wood or steel members n exc 4kg per sqm

Ditto as per item No 40 above but fixing only

S&F in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Excavation in post holes in hard dense soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed

M & L for plain cement concrete in (1:3:6) type C2 (Using 40mm graded stone aggregate) as in foundation filling or mass concrete or simillar work complete all as specified and directed

M/S Narendra Construction

Sayili Enterprises

SUN Enterprises

Sarkar Enterprises

G V HAGAWANE

M/s.C.D.Rathod

M/S OMSAI ENTERPRISES

M/S CHANDAN BUILDERS

MANISH VEDPRAKASH ARORA