Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.0 LAccepted-AOC | ₹4.0 L | L1 | Accepted-AOC L1 |
| 2 | L2₹4.1 LRejected-AOC TETULMURI DHANBAD 00 00 TETULMURI SIJUA DHANBAD TETULMURI DHANBAD 00 00 TETULMURI SIJUA DHANBAD DHANBAD JHARKHAND INDIA | DHANBAD | JHARKHAND | 828121 | ₹4.1 L | L2 | Rejected-AOC L2 |
| 3 | L3₹4.3 LRejected-AOC 0 RUPSINGH JOTE BAGDOGRA DARJEELING WEST BENGAL 734014 UDYAM WB 06 0007631 | DARJEELING | WEST BENGAL | 734014 | ₹4.3 L | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | M/S OM ENTERPRISES L1 | SUNRISE ENTERPRISES L2 | M/S BHARDWAJ ENTERPRISES L3 |
|---|---|---|---|---|---|---|
| 1.01 | Erection of Metalic Pole of above 10 meter and upto 12 meter in cement concrete 1:3:6 (1 cement:3coarse sand:6graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc as required | 3 | no. | 6,858 ₹20,574 | 6,921.2 ₹20,763.60 | 7,235 ₹21,705 |
| 1.02 | Cutting of 20 nos. of 90 lbs Rail Pole to make into poles of required length (77.4025 x 20 nos. x 2 sides = 3096.1") | 3,096.1 | inch | 13 ₹40,249.30 | 13.2 ₹40,868.52 | 13.8 ₹42,726.18 |
| 1.03 | Cutting of M.S. Plates | 1,400 | inch | 13 ₹18,200 | 13.2 ₹18,480 | 13.8 ₹19,320 |
| 1.04 | Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) | 120 | sqm | 70.3 ₹8,436 | 70.95 ₹8,514 | 74.18 ₹8,901.60 |
| 1.05 | Painting with synthetic enamel paint of approved brand and manufacture of
required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | 120 | sqm | 158.43 ₹19,011.60 | 159.88 ₹19,185.60 | 167.15 ₹20,058 |
| 1.06 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding1.5 min width as well as10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto1.5 m,as directed by Engineer-in-Charge: | 42 | sqm | 82 ₹3,444 | 82.72 ₹3,474.24 | 86.5 ₹3,633 |
| 1.07 | Surface dressing of the ground including removing vegetation and in equalities not exceeding15 cm deep and disposal of rubbish, lead upto 50 m and lift up to 1.5 m. | 30 | sqm | 21.53 ₹645.90 | 21.73 ₹651.90 | 22.71 ₹681.30 |
| 1.08 | Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and for all lift | 24 | cum | 124.6 ₹2,990.40 | 125.84 ₹3,020.16 | 131.56 ₹3,157.44 |
| 1.09 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 1,800 | kg. | 100.88 ₹1.8 L | 101.81 ₹1.8 L | 106.43 ₹1.9 L |
| 1.10 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. | 1 | no. | 862.19 ₹862.19 | 870.1 ₹870.10 | 909.65 ₹909.65 |
Tender Value
Refer Docs
EMD Value
₹4,700
Closing Date
16 Jun 2025, 9:00 amClosed
PE EnM Karo OCP
OFFICE OF PE EnM Karo OCP
Making Railing along the ramp of the entry and the exit side, making arrangements for alighting of the drivers of the hywas from the weighment platform, and erection of poles with lightning conductor, at Weighbridge no. 9, Kargali Railway Siding PF 2
2025_CCL_337133_1
P.E. (EnM)/ Karo OCP/ e-tender/ 2025-26/ 15
Open Tender
Electrical and Maintenance Works
5 days
KARO OCP
Please refer Tender documents.
3 documents required · 3 mandatory
₹4,700
9 May 2026
7 Jun 2025
17 Jun 2025
7 Jun 2025
16 Jun 2025
7 Jun 2025
7 Jun 2025 - 16 Jun 2025
Amount
Erection of Metalic Pole of above 10 meter and upto 12 meter in cement concrete 1:3:6 (1 cement:3coarse sand:6graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc as required
Cutting of 20 nos. of 90 lbs Rail Pole to make into poles of required length (77.4025 x 20 nos. x 2 sides = 3096.1")
Cutting of M.S. Plates
Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
Earth work in surface excavation not exceeding 30 cm in depth but exceeding1.5 min width as well as10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto1.5 m,as directed by Engineer-in-Charge:
Surface dressing of the ground including removing vegetation and in equalities not exceeding15 cm deep and disposal of rubbish, lead upto 50 m and lift up to 1.5 m.
Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and for all lift
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
Supplying and erection of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required.
Supplying and erection of 100 mm X 65 mm pin insulator complete with G.I. Spindle and nuts etc. as required .
Earthing with G.I. earth plate 600 mm X 600 mm X 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)
Total impact of GST for the purpose of CTC
SUNRISE ENTERPRISES (BID ID -1160797)
M/S BHARDWAJ ENTERPRISES (BID ID -1160953)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.56 MB
BOQ_349497.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid