GE/ALP (8377B) KOLKATA OF 2024-25

Amount

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete.

M&L for Rendering 15mm thick in cement mortar (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick, set in cement mortar (1:4), as on brick/ concrete surface etc finish even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 10mm thick with cement mortar (1:3) as on concrete surfaces and finished the surface even and smooth as in ceiling includiing necessery scafolding, chicken wire mesh etc complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer 3mm thick wall care putty on wall complete all as specified and as directed.

M&L for preparation of old decorated surfaces by complete removal of existing surface brooming down or steel wire brushing scrapping down smoke soot and greasy spots and applying two coat of cement base paint on walls complete all as specified and directed. (Upto 12 storey of bldg)

M&L for preparation of new plastered surface of ceiling and applying two coat of white wash on new surface etc, complete all as specified and directed.

M&L for complete removal of old decorated surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds,et and applying one coat of cement base paint on walls complete all as specified and directed. (Upto 12 storey of bldg)

M&L for preparation of old plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer 3mm thick wall care putty on wall complete all as specified and directed.

Taking down chowkat or frames with shutter exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and directed.

Easing of existing door shutters for easy closing/ opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

S&F Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/ glazing clips, locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm and shutter of section 20mm X20mm X1.55mm incl (two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions and complete all as specified and directed.

S&F powder coated aluminium ventilator louvre type with frame, aluminium section weighing 0.55 Kg/M including 4mm thick glass/ss wire mesh necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc., complete all as specified and directed

Dismantling wrought iron or mild steel works of any description not otherwise provided for

Supplying and fixing Mild Steel framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, railings and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed and design/shap approved.

S&F Steel work in tubular trusses, posts, rafters, struss and brackets etc including special shaped washers etc. complete using ERW or induction butt welded tubes incl fixing to walls and similar supports etc complete all as specified and directed.

Material & labour preparation of new steel and iron surfaces of any description area exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide and zinc chrome primer, complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F for 2nd Class HW Plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chanfered, put together with glue pinned at joints all as specified and directed.

S&F for 30mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete.

S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast al alloy all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer area exc.10cm width or girth over new wooden surfaces including preparation of surface complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F for Power coated aluminium door shutter fixed including roller machine with rubber gasket, stopper, cleats, handles etc complete incl aluminium door styles of size 80 mm x 38 mm x 2.00 mm and aluminium door section of top, bottom and lock rail shutter frame of 80 mm x 38mm x 2.00 mm taking down old door with necessary all fittingand all necessary fittinngs complete all as specified and directed.

S & F for Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc, complete all as spcified and directed.

Taking down chowkhat or frames with shutter not exc. 1.5 Sqm each (without taking of shutters from the frames) complete all as specified and directed.

S&F Solid PVC Mouded Door Frame of size 50mm x 47mm made out of 5mm Moulded/printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with partical board core complete all as specified and directed.

S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section all as specified and directed.

S&F 150 mm long Aluminium handles, cast type, anodisedcomplete all as specified and directed.

S&F Stainless steel butt hinges medium weight 100mm long etc complete all as specified and directed.

M&L for 25 mmx4mm size mild steel flat iron as in hold fast conforming to Fe-290 Gde E-165 complete all as specified and directed.

M & L for Cement concrete Type C1 (1:3:6) (20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings/hold fast, kneelers, apex stones, bed plates, kerbs water troughs and the like including or chamfered angles and throating, complete all as specified and directed

Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks built in cement mortar (1:6) straight or curved on plan exceeding 6 mtr mean radius and complete all as specified and directed.

M&L for Brickwork with sub-class 'B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Dismantiling of floor hearth or wall tiling incl cement mortar (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and as directed.

M&L for Double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in floor Screed bed or bedding layer 15 mm thick in cement mortar (1:6) etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over complete all as specified and directed .

M&L for Double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting Screed bed or bedding layer 10 mm thick in cement mortar (1:4) etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over complete all as specified and directed .

M & L for double charge Vitrified Ceramic tiles light shade 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as flooring with border of dark shed, over and including 15mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match in white or coloured cement to match etc complete in all respect as specified and directed.

M&L Non-skid coloured ceramic floor tiles 7 to 8 mm thick area of each tile exc .11 sqm but n exc 0.18 sqm in floor Screed bed or bedding layer 15 mm thick in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to to match the shade of tiles .complete all as specified and directed.

M&L Glazed ceramic coloured wall tiles of size (450x300x6)mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles Screed bed or bedding layer 10 mm thick in cement mortar (1:4) etc, complete all as specified and as directed.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. (upto 10 storey High of building)

Providing anti termite (post construction) along the external wall below concrete or masonary apron using chemical Chloropyritphos 20 EC or linane 20 EC (ISI Marked) emulsion @ 2.25 literes per linear meter including drilling and plugging holes etc in aprons/plinth protection, complete all as specified and directed.

Providing anti termite (post construction) of soil under existing floors using chemical Chloropyritphos 20 EC or linane 20 EC (ISI Marked) emulsion @ one leter per holes , 300 mm apart along the junction of floor and walls including drilling and plugging 12 mm dia holes with cement mortar 1:2 ( 1 Cement : 2 coarse sand) to match the existing floors.

Providing anti termite (post construction) of voids in masonary using chemical Chloropyritphos 20 EC or linane 20 EC (ISI Marked) emulsion @ 1.00 liter per holes , at 300 mm intervals including drilling 6 mm dia holes at downward angle of 45 degree and repluging the holes with cement mortar (1:2) to match the existing surface , complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n exc 15 cm thickness (below or above ground level complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) Type B-1 ( using 20 mm graded crushed stone aggregate) as in sub base of floor/ as in bedding of tiles/ Kota complete all as specified and directed.

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and directed.

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and directed.

Supplying and laying for 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed

Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed.

S&F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed.

S&F in repairs 15mm bore Brass CP bib cock fancy type with chromium plated crutch or butterfly handle complete all as specified and directed.

S&F in repairs Vitreous China wash basin ( white), flat back, size 580 mm x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed.

S&F in repairs Vitreous China wash basin (coloured), Pedestral pattern, boul size 580 mm x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all specified and as directed.

S&F 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long 'D' type complete fixed in repairs with brass chromium plated screw complete all as specified and directed.

Cutting grooves/chases in cement concrete or brick wall / floor for taking down of GI pipe line and making good the disturbed surfaces to match with existing specification complete all as specified and directed.

S & F in repair Soap dish, vitreous China white, approximate size 160mm x 160mm x 90mm embedded in the wall etc, complete all as specified and directed.

S & F in repair Vitreous China Urinal, Half stall type, white and 32mm waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) suitable for urinals, incl Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) etc,complete all as specified and directed.

Supply & fixing in repair wash down water closet (pedestal pattern) including connection to drain (or outgoing pipe) and to flush pipe etc. and making good the damaged surfaces complete all as specified and directed.

Supply and fixing in repair cascade type vitreous china white wash down water closet wall hung with flushing cistern, hush seat cover and internal fittings complete with fixing bolts and making all necessary connections complete all as specified and directed.

Supply and fixing PVC water closet seat cover heavy duty coloured closed pattern with flat bottom and cover and mild steel CP hinnging device complete.

Supply and fixing CP hand shower (faucet) with one mtr flexible tube with wall hook complete all as specified and directed.

Supply and fixing in repair brass CP toilet paper holder to wall with chromium plated brass screws complete all as specified and directed.

Supply and fixing in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and directed.

Supply and fixing in repair 15mm bore Brass CP angular stop cock concealed or any type with crutch or butterfly handle complete all as specified and directed.

Supply and fixing in repair PVC connection 15 mm size pipe with PTMT nut of Length 450mm complete all as specified and directed.

Supply and fixing in repairs 15mm bore two way Bib tap CP fancy type with chromium plated crutch or butterfly handle complete all as specified and directed.

Supply and fixing in repairs 1mm thick of stainless steel kitchen plate rack of size 750mm x 900mm including all fixing arrangement complete all as specified and directed.

Supply and fixing in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm and including 32mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms).

Supply and fixing 40mm bore CPVC pipe with fittings complete fixed in wall/laid in floor complete all as specified and directed.

Supply and fixing for 75 mm diameter of outlet of PVC(SWR) floor trap,Plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F for 25mm curtain rods dicorative aluminium alloy with fixing brackets including taking down old pelmet box complete all as specified.

Supply and fixing for bracket dacorative type for curtain rods aluminium alloy complete all as specified.

Dismantalling of existing water tanks and removinging to store and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed.

Demolation of cement concrete (reinforced) in ground floor and paving not exceeding 15 cm thick (below or above G.L) all as specified and directed

M&L for RCC(Nominal Mix) in type-B1 (1:2:4) (20mm graded stone aggregate) pre cast slabs supported on walls for cup board, counter basin and Kitchen slabs,manhole cover etc complete all as specified and directed.

M&L for mild steel TMT bars 10MM dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete and all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

M&L for 10 mm thick Gypsum board false ceiling joint less work including application of putty over gypsum board to achieve smooth and joint less celing surface and applying two coat of oil bound distemper in ceiling surfaces including framed work for consisting of 60 mm wide GI steel 'C' section of as in main of 0.71mm thick and 60 mm GI channel section as in cross member of 0.63 mm thick and GI steel angle section as in suspenders of size (25x20x0.63) mm and wire cloth of 0.71 mm dia of wire and 100x50mm aperature size including cutting , riveting, steel fastener, drilling holes in RCC roof and securing with screws etc complete all as specified and directed.

M&L POP cornice width n.exc 200mm wide in ceiling edge of any design and shape ,complete all as specified and directed.

M&L for suspended false ceilling system using metalic exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39 mm x 24mm x 0.80mm thick ( thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thickness comprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) with and including 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid ( placed in the grid system duly suspended with 4 mm dia G I bars hangers fixed with steel dash through fasteners from purlins of the roof with necessary fittings and fixtures etc complete all as directed.

All as per item No 88 here-in-before but only for refixing the serviceable false ceiling.

S&F in repair 6 mm thick Gypsum board/calcium silicate board tiles of size 600mm x 600 mm incl proper hanging arangement as required complete all as specified and directed.

Dismantiling of Stone slabs and tiles of any description or thickness in floors, aprons Laid bedded and pointed in any mortar mortar and rubbish off the premises (out of MOD land), complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick, laid over cement screed over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for treating the surface of old kota stone slab flooring with beeswax polish complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 15 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 inch radius with chromium plated bracket guard and railing complete all as specified and directed.

Supply, mixing and application two component structural grade polymer modified reinstatement morter, where local spalling has taken place or shuttering is not possible . The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 complete all as specified and directed upto 25 mm average thickness and upto four storey High. NOTE:- Cement and sand morter in proportion of 1:2 graded coarse sand with polymer admixed in proportions approved

S&F prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination to timber frame work in Cupboard all as specified and directed.

S&F in repair Brass sliding door bolt 300 mm long with sand or dia-cast brass hasp, staple ( Bolt type) and fixing with rolled or drawn brass bolts.

Supply and fixing in repair for 18/19mm thick block boards, grade 2 quality,interior grade, decorative type with decorative face veneer on both face fixed with screws to timber frame work as in cupboard shutter, Kitchen cabinate, work station etc .. including external teak wood lipping 6mm thick fixed with nails complete all as specified and directed.

Supply and fixing in repair for 0.9mm thickess of decorative laminated type 1 of surfaces finish,colour and pattern as approved fixed with approved adhesive as per manufacture,s instruction complete all as specified and directed.

S&F 30mm width of flaps continues piano hinges mild steel bright finish or elec-trogalvanised complete all as specified and directed.

S&F for Brass Locks, cupboard, grade I, size 50 mm two levers all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed.

Supply & fix 100 mm long Brass handles,cast type,polished bright complete all as specified and directed.

S&F in repair Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC fillets of width 35mm including necessary caping/fillets and angles at top , bottom, middle and junctions required as per site etc complete all as per specified and directed.

Supply & fixing in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm all as directed.

Hacking out old broken glass of any thickness, sizes quality on description from metal frames includng punching or drilling out old glazing pins/spring clips.

Supply and fix 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as directed.

Supply and fix 4mm thick frosted glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as directed.

S&F in repair power coated aluminium Partition wall of frame size 80mm x 38mm x 2.00 mm with standard beads/glazing clips, locking arrangement etc with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed.

S&F 4.8 mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area of glass not exc 0.5 sqm each pane.

M&L 9 mm thick prelaminated partilce boards interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame for pelmet boxes,aluminium door and aluminium partitions complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any descriptions, below or above Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and directed.

M&L precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in cover slab, shelves, and similar work set in cement mortar (1:4).complete all as specified and directed.

M&L for mild steel TMT bars 8 to 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings,kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

Material & labour for 15 mm thick cement plaster (1:6) on fair faces of brick work or concrete surfaces upto four storey high bldg complete all as specified and directed.

M & L for PCC (1:3:6) Type C2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

Material and labour for Glazed ceramic tiles of size 450mm x 300mm x7-8mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed.

Material and labour for Non-Skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for Double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles exceeding 0.42 sqm but not exc 1.00 Sqm (1200mmX600mm) as in skirting etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over Screed bed or bedding layer of mortar 10 mm thick in cement mortar (1:4) as in dado/skirting complete all as specified and directed .

S&F in repairs power coated aluminium door shutter including door frame fixed including roller machine with rubber gasket, stopper, cleats, handles etc complete incl aluminium door styles of size 80 mm x 38 mm x 2.00 mm and aluminium door section of top, bottom and lock rail shutter frame of 80 mm x 38mm x 3.00 mm taking down old door with necessary all fittingand all necessary fittinngs complete all as specified and as directed.

S & F 5.5 mm sheet glass, ordinary quality and glazing with oil putty in square exc 0.50 Sq.m in each etc complete all as specified and directed.

S&F for Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 92.00mmX29.50mmX1.50mm and shutter of section 20mm X20mm X1.55mm incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions and all as specified and directed.

Preparation of old wood surface of any description. not otherwise described, over 10 cm width or girth and applying a coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

S&F 3mm thick wall care putty on wall/ceilling complete all as specified and directed.

Material and labour for 16-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.

Complete removal of existing treatment of walls, ceiling and applying two coats of distemper oil emulsion over 3mm thick JK wall care putty (two coats) including necessary chalk whiting and priming coats complete all as specified directed.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing.upto 12 storied bldg.

Supply and fixing for 150mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F for 100mm long Aluminium,anodised extruded handle fabricated type, complete all as specified and directed.

S&F Vitreous China wash basin ( white), oval shape, counter type, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed.

S&F 15mm bore Brass CP angular stopcock type with crutch or butterfly handle complete all as specified and directed .

S&F PVC connection 15 mm size pipe with PTMT nut of Length 600mm complete all as specified and directed.

Supplying and laying for 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Supplying and laying for 32 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

S&F 32mm dia flexible PVC waste pipe for basin etc complete all as specified and directed.

S&F 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and directed.

S&F 110mm bore PVC(SWR) pipe bend single socket complete all as specified and directed.

Supply and fixing 110 mm dia PVC (SWR) junction single, (singleT), equal or unequal fixed to wall upto any height of the building complete all as specified and directed.

S&F 75mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and directed.

S&F 75 mm bore PVC(SWR) pipe bend single socket complete all as specified and directed.

Supply and fixing 75 mm dia PVC (SWR) junction single, (single T), equal or unequal fixed to wall upto any height of the building complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. all complete as specified and directed.

M&L for point wiring for one light/ bell/ fan controlled by one number one way switch for 5Amps SSC complete with 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including PVC concealed conduit of suitable size (minimum 20mm dia medium grade ISI Marked) complete with one run of 1100V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of modular type galvanized MS sheet pressed sunken box not less than 1.00 mm thick concealed on wall including fixing of modular cover plate of suitable modules with fixing screws, for fixing of modular type switches / socke t/ Fan regulator etc. complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.

All as per item No.147 here in before but for 5 Amps Socket on same board complete all as specified and directed.

All as per item No.147 here in before but for 5 A socket point on independent board complete all as specified and directed.

All as per item No.147 here in before but for 15 A socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.

All as per item No.147 here in before but for AC point independent with 4.0 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.

S & F Modular type switch, one way 6 Amps , 1 module complete.

S & F modular type socket 5 pin, 6 Amps 2 module complete.

S & F Modular type socket 5 pin, 16 Amps 2 module complete

S & F Modular type switch, one way 16 Amps, 1 module complete

S & F Modular type fan regulator step type(2 module)120 Watt.

S & F Ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 230 V.

S & F LED light fitting wit high out put diffuser 4 feet, 20 watt 220 V AC decorative type with inbuilt driver and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make- Havells (Cat No- LUMILINEBS20WLED830SP CWH)/ Bajaj (Cat No- BSLSB20WWH)/ Crompton (Cat No – CCS-103-20-65-SL-DP-NWH).

S & F LED light fitting wit high out put diffuser 2 feet, 10 watt 220 V AC decorative type with inbuilt driver and LED lamp/PC diffuser including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make- Havells (Cat No-LUMILINEBS10WLED865SP CWH)/ Baja (Cat No- BSLSB10WWH)/ Crompton (Cat No- CCS-103-10-65-SL-DP-NWH).

S & F in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with inbuilt driver, suitable for roof ceiling including connecting up with driver three core flexible copper conductor wire of suitable size complete all as specified and as directed. Make : Crompton , Cat No. : LCTLRNE-36-FO-CDL Havells (CAT No- VENUSNEOHE4x1PLR36WLED 8576)/Bajaj (Cat No- BZRSQL36L)/ORIENT (Cat No-LTRAQ36CVO).

Taking down carefully LED Celing light fitting/tube light fitting and refixing after completeion of E/M and B/R works at the same/new location complete all as directed.

S & F LED luminaire 12 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with inbuilt driver, suitable for roof ceiling cutout (138x138) mm including connecting up with driver three core flexible copper conductor wire of suitable size complete all as specified and as directed. Make - CROMPTON (CAT No- LSDEP-12-NW)/ Orient (Cat No-LDRES-12-C-VI) or equivalent make as approved by GE.

S & F modular type 32 A Motor starters (for AC) white colour.

Supply and fixing TPN 6 way double door MCB, IP43 including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.

Supply and fix as in repair SPN MCB DB 8 way with Amps rated copper bus bar, neutral link, suitable for mounting MCB's 240 volts double door type including taking down old one and making good the disturbed surface complete all as specified and directed.

Supply and fixing MCB TPN 40 To 100 AMP 415 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.

Supply and MCB 06 Amps to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.

Supply and fixing MCB 06 Amps to 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.

Material and labour for of sub-main wiring with two run of 1100 V grade FRLSH PVC insulated & unsheathed 6.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 6.0 Sqmm 1100 V grade PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through conceled PVC conduit complete all as specified and directed. Note: Three runs of 6.0 Sqmm cable shall be measured as one length.

Material and labour in for replacement of three phase sub-main wiring (surface type) with Four (R,Y,B, N) run of PVC insulated & unsheathed 10.0 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 10.0 Sqmm PVC insulated & unsheathed single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade for earth continuity conductor connected to common earth dolly, drawn through PVC conduit complete all as specified and as directed. Note: Three runs of 10.0 Sqmm cable shall be measured as one length.

Supply and laying for under ground heavy duty XLPE insulated, armoured aluminium conductor cable 1100 volts grade, cross-sectional area 16 sq. mm 4 core in trenches /clamped on wall through pipe in road crossing / plinth/ drain/ duct/ floor along pole / wall /ceillings etc complete all as specified and directed.

S & F low density poly ethylene (LDPE) pipe, flexible type of pressure rating 6.0 kg/sqm laid through the coping of the poles for passing of pipes complete all as specified for bore of pipe 40mm

Materials and labour for earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 32mm x 6mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded stone aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and directed.

S & F Modular type Black/Wooden Clour switch, one way 6 Amps , 1 module complete

S & F modular Black/Wooden Clour type socket 5 pin, 6 Amps 2 module complete.

S & F Modular Black/Wooden Clour type socket 5 pin, 16 Amps 2 module complete

S & F Modular Black/Wooden Clour type switch, one way 16 Amps, 1 module complete

S & F Electronic Ceiling fan regulator Black/Wooden Clour modular (2 Module stepped type) flush type suitable for 230 V AC.

S & F Black/Wooden Colour modular type 32 A Motor starters (for AC) white clour.

M&L modular metal flush box 3 module including taking down of old one complete all as specified and directed.

M&L modular Black/Wooden Clour cover plate with frame 3 module including taking down of old one complete all as specified and directed.

Material and labour for circuit/sub-main wiring with two run of 1100 V grade PVC insulated & unsheathed 4.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 4.0 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through concealed PVC conduit complete all as specified and as directed. Note : Three runs of 4.0 Sqmm cable shall measured as one length.

Material and labour for circuit/sub-main wiring concealed with two run of 1100 V grade FRLSH PVC insulated & unsheathed 1.5 Sqmm single core multi stranded copper conductor cable alongwith one run of 1.5 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable green for earth continuity conductor connected to common earth dolly, drawn through concealed PVC conduit complete all as specified and as directed. Note :Three runs of 1.5 Sqmm cable shall measured as one length.

S & F Round LED luminaire 12 watt, 220 V AC (Warm White) recessed type with high efficiency diffuser soft glare free light complete with inbuilt driver, to be fixed in POP roof ceiling/False Celing, including connecting up with driver three core flexible copper conductor wire of 0.75Sqmm size complete all as specified and as directed. Make- Crompton (Cat No-LSCRM-12M-CDL) / Bajaj (Cat No- BPSLR 12 W LED WH RD SD) / Havells (Cat No- GLOWDLR12WLED830S)/ Philips (Cat No-SM250C LED12S-6500 PSU WH)

Supply and fixing of 20mm dia rigid non-metallic PVC conduit (Medium grade) for laying/fixing of LAN / Internet cable complete all as specified and as directed.

M & L For replacement of down rod suitable for Celing fan (by taking down the existing celing fan and refixing to a suitable height at the level below the POP Celing/ False Celing) of between 2.0 mtrs - 3.0 mtrs, medium grade M.S. Pipe duly drilled, screwed and painted with one coat of rdoxide metal primer and two coats of high gloss white synthetic enamel paint complete with nut, bolt etc and all as directed. NOTE: Works against all items contained in the BOQ have to be carried out upto and including 12th floor of the Bldgs and quoted rates shall be deemed to be included to this factor.

SUDHA ENTERPRISES (BID ID -3128404)

UNIVERSAL TRADING CENTRE (BID ID -3121017)

GOODWILL AND CO. (BID ID -3122956)

KAMAKHYA TRADERS (BID ID -3127177)

R.R.ENTERPRISE (BID ID -3126601)

KWALITY CONSTRUCTION (BID ID -3122973)

ARATI TRADING CO (BID ID -3120517)

RADHA ENTERPRISE (BID ID -3120190)