65(W)/EDCS/2022-23

Amount

Safe carriage including Loading/Unloading & proper stacking of following store materials from Store Centre, Baibagh, Shahjahanpur / JE dump Store to site of work (Approx. distance 50 Km.)

S.T Pole 11 Mtr long

PCC Pole 8.50 Mtr long

PCC Pole 9 Mtr long

Top Channel 33 KV

Dropper Chanel 33 KV, 11 KV

33 KV XLPE Cable 3x300 mm

Cable Jointing Kits Straight Through for 33 KV

Cable Jointing Kits Outdoor for 33 KV

33 KV Disc Insulator B&S Type

33 KV Disc Fitting

33 KV Pin Insulator

33 KV Pin with Nut

33 KV V-type X-Arm

33 KV X-Arm hollding Clamp

Stay Complete

Earthing Complete

11 KV XLPE CABLE 3X70 MMSQ

11 KV XLPE Cable 3x185 mm

11 KV XLPE Cable 3x300 mm

Cable Jointing Kits Straight Through for 11 KV (3x185)

Cable Jointing Kits Straight Through for 11 KV (3x300)

Cable Jointing Kits Outdoor for 11 KV (3x185)

Cable Jointing Kits Outdoor for 11 KV (3x300)

Top Channel 11 KV

11 KV Disc Insulator

11 KV Disc Fitting

11 KV Pin Insulator

11 KV Pin with Nut

11 KV X-Arm

11 KV T-OOF

Guarding Angle

G.I Wire 6 SWG

Cable Jointing kit straight through 11 kv 3x70 mm2

Cable Jointing kit Out door 11 KV 3*70 SQ. MM

11/0.4 KV, 100 KVA TF

11/0.4 KV, 63 KVA TF

LT Cable AL. 3.5x150 SQMM

LT Cable AL. 3.5x70 SQMM

DISTRIBUTION BOX 3- PHASE

ACSR Dog Conductor

S/S Angle Base

L.T. Cable Aluminum (3.5x240 mmsq)

Supply and fixing of following decentralised material (Provided By Contractor)

Top & Dropper Chanel Clamp for STP (Provided By Contractor)

M.S. Nut & Bolt (Provided By Contractor)

Danger Board (Provided By Contractor)

Bracing Clamps 6.5 Inch Dia (Provided By Contractor)

Bracing Clamps 7.5 Inch Dia (Provided By Contractor)

G.I. Barbed Wire (Provided By Contractor)

Earth Wire Clamp Provided By Contractor

Top Cleat (Provided By Contractor)

11 KV X-Arm holding Clamp Provided By Contractor

PTW T/F PLINTH WITH FANCYING ( Provide By Contractor )

LT ALUMINIUM LUG 240 SQ. MM ( Provide By Contractor )

LT ALUMINIUM LUG 150 SQ. MM ( Provide By Contractor )

LT ALUMINIUM LUG 70 SQ. MM ( Provide By Contractor )

Holding Clamp for Cable with nut and bolt (Provided By Contractor)

Stone Pad (Provided By Contractor)

33 KV Top Hamper (Provided By Contractor)

M.S. Angle Bracing with Nut & Bolts (65x65x6) (Provided By Contractor)

Earth Wire Complete with Nut Bolt (Provided By Contractor)

F-Clamp 11 KV, 33 KV Provided By Contractor

Guarding Angle Clamp with Nuts and Bolts ( Provide By Contractor )

Clamps for Top & Dropper Chennal , STP, PCC Pole. ( Provide By Contractor )

Errection Work

Fabrication, erection of Single pole for 11 KV line on STP 11 mtr long Pole with fixing of necessary clamps & other accessories like 1 no. 11KV V-type Cross arm,1 no. F-Clamp. Its grouting in ratio 1:4:8, plinthing 300 mm above ground level, painting of pole with one coat of red oxide & two coats of enamel paint (ISI mark) & earthing of support as per RESSPO Norms (All grouting & painting material shall be provided by the contractor.).

Fabrication, erection of double pole structure for 11 KV end terminations on 11 M long ST Pole with fixing of necessary clamps & other accessories like 1 no. Top channel 2240x100x50 mm, MS Angle Cross Bracing. Its grouting in ratio 1:4:8, plinthing 300 mm above ground level, painting of pole with one coat of red oxide & two coats of enamel paint (ISI mark), earthing of support as per RESSPO Norms & one side cable expose for road crossing (All grouting material shall be provided by the contractor.).

Fabrication, erection of 11 KV four pole structure on 11 Mtr long ST Pole with fixing of necessary clamps & other accessories like 4 no. Top channel 2240x100x50 mm, MS Angle Cross Bracing. Its grouting in ratio 1:4:8, plinthing 300 mm above ground level, painting of pole with one coat of red oxide & two coats of enamel paint (ISI mark), earthing of support as per RESSPO Norms & one side cable expose for road crossing (All grouting material shall be provided by the contractor.).

Fabrication, erection of Single pole for 11 KV line on PCC POLE 8.50 mtr long Pole with fixing of necessary clamps & other accessories like 1 no. 11KV V-type Cross arm,1 no. F-Clamp. Its grouting in ratio 1:4:8, plinthing 300 mm above ground level, painting of pole with one coat of red oxide & two coats of enamel paint (ISI mark) & earthing of support as per RESSPO Norms (All grouting & painting material shall be provided by the contractor.).

Fabrication, erection of Double pole for 11 KV line on PCC POLE 8.50 mtr long Pole with fixing of necessary clamps & other accessories like 1 no. 11KV V-type Cross arm,1 no. F-Clamp. Its grouting in ratio 1:4:8, plinthing 300 mm above ground level, painting of pole with one coat of red oxide & two coats of enamel paint (ISI mark) & earthing of support as per RESSPO Norms (All grouting & painting material shall be provided by the contractor.).

Fabrication, erection of Four pole for 11 KV line on PCC POLE 8.50 mtr long Pole with fixing of necessary clamps & other accessories like 1 no. 11KV V-type Cross arm,1 no. F-Clamp. Its grouting in ratio 1:4:8, plinthing 300 mm above ground level, painting of pole with one coat of red oxide & two coats of enamel paint (ISI mark) & earthing of support as per RESSPO Norms (All grouting & painting material shall be provided by the contractor.).

Fabrication, erection of Double pole for LT line on PCC Pole 8.5 mtr long Pole with fixing of necessary clamps & other accessories like L.T. Clamp, Earth wire Clamp etc. grouting in ratio 1:4:8, plinthing 300 mm above ground level, painting of pole with one coat of red oxide & two coats of enamel paint (ISI mark) & earthing of support as per RESSPO Norms (All grouting & painting material shall be provided by the contractor.).

Fabrication, erection of Single pole for 33 KV line on STP 11 mtr long Pole with fixing of necessary clamps & other accessories like 33 KV Clamp, Earth wire Clamp etc. grouting in ratio 1:4:8, plinthing 300 mm above ground level, painting of pole with one coat of red oxide & two coats of enamel paint (ISI mark) & earthing of support as per RESSPO Norms (All grouting & painting material shall be provided by the contractor.).

Fabrication, erection of 33 KV double pole structure for end terminations on 11 M long ST Pole with fixing of necessary clamps & other accessories like 1 no. Top channel 3200x125x65 mm, MS Angle Cross Bracing. Its grouting in ratio 1:4:8, plinthing 300 mm above ground level, painting of pole with one coat of red oxide & two coats of enamel paint (ISI mark), earthing of support as per RESSPO Norms & one side cable expose for road crossing (All grouting material shall be provided by the contractor.).

Fabrication, erection of 33 KV Four pole structure on 11 Mtr. long ST Pole with fixing of necessary clamps & other accessories like 4 no. Top channel 3200x125x65 mm, MS Angle Cross Bracing. Its grouting in ratio 1:4:8, plinthing 300 mm above ground level, painting of pole with one coat of red oxide & two coats of enamel paint (ISI mark), earthing of support as per RESSPO Norms & one side cable expose for road crossing (All grouting material shall be provided by the contractor.).

Fabrication, erection of double pole structure suitable for 25 to 100 KVA T/F on 11 M long ST Pole with fixing of necessary clamps & other accessories like 1 no. Top channel 2240x100X50 mm, MS Angle Cross Bracing. Its grouting in ratio 1:4:8, plinthing 300 mm above ground level, painting of pole with one coat of red oxide & two coats of enamel paint (ISI mark), earthing of support as per RESSPO Norms & one side cable expose for road crossing (All grouting material shall be provided by the contractor.)

Making of Trnasformer Plinth and Fabrication, erection for 25 to 100 KVA T/F & Fencing with Fixing all Asseceries (All Civil material & Fancing shall be provided by the contractor.)

Erection/Fixing for stay set with stay wire and clamp as per RESSPO drawing including binding. Climbing, clamping, tightening and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 before back filling of the pits as per RESSPO, cement, brick, concrete ballast, sand and etc would be provided by the contractor for 33/11 KV single support, double pole and four pole structure.

Stringing and sagging of 33 KV overhead line on ACSR DOG Conductor as per RESSPO Norms.

Stringing and sagging of 11 KV overhead line on ACSR DOG Conductor as per RESSPO Norms.

Laying of (double circuit) 33 KV XLPE cable 3x300 sq.mm. in HDPE Pipe 6” dia ( 160/150 mm) by trench less Technology method by Horizontal Drilling System for Road Xing. The job includes the cost of excavation of Earth, supply of HDPE Pipe 6” dia ( 160/150 mm) laying of cable inside it. The work is to be carried out as per Govt. approved Drg. (HDPE pipe 1180 meter shall be provided and arranged by the contractor through approved vendor of UPPCL).

Hoisting of 3x300 mm2 33 KV XLPE cable on double pole with GI pipe of size 8” dia including its jumpering complete with Clamps nut and bolts. (G.I Pipe, Clamp, Nut & Bolts shall be provided by the contractor through approved vendor of UPPCL, Approx 10 Mtr. Per Hosting). Also make 10 mtr. cable loop and earthing of each cable (for double circuit).

Laying of (double circuit) 11 KV XLPE cable 3x185 sq.mm. by trench less Technology method by Deep drilling System. The job includes the cost of HDPE Pipe 06” dia, excavation of Earth, laying of cable inside it. The work is to be carried out as per Govt. approved Drg. (HDPE pipe 2720 meter will be provided and arranged by the contractor through approved vendor of UPPCL).

Laying of (double circuit) 11 KV XLPE cable 3x300 sq.mm. by trench less Technology method by Deep drilling System. The job includes the cost of HDPE Pipe 06” dia, excavation of Earth, laying of cable inside it. The work is to be carried out as per Govt. approved Drg. (HDPE pipe 4880 meter will be provided and arranged by the contractor through approved vendor of UPPCL).

Laying of (double circuit) 11 KV XLPE cable 3x70 sq.mm. by trench less Technology method by Deep drilling System. The job includes the cost of HDPE Pipe 06” dia, excavation of Earth, laying of cable inside it. The work is to be carried out as per Govt. approved Drg. (HDPE pipe 21940 meter will be provided and arranged by the contractor through approved vendor of UPPCL).

Hoisting of 3x185 mm2 Sq.mm 11 KV XLPE cable on double pole with GI pipe of size 6” dia including its jumpering complete with Clamps nut and bolts (G.I Pipe, Clamp, Nut & Bolts shall be provided by the contractor through approved vendor of UPPCL, Approx 6 Mtr. Per Hosting). Also make 10 mtr. cable loop and earthing of each cable (for double circuit).

Hoisting of 3x70 Sq.mm 11 KV XLPE cable on double pole with GI pipe of size 6” dia including its jumpering complete with Clamps nut and bolts (G.I Pipe, Clamp, Nut & Bolts shall be provided by the contractor through approved vendor of UPPCL, Approx 6 Mtr. Per Hosting). Also make 10 mtr. cable loop and earthing of each cable (for double circuit).

Hoisting of 3x300 mm2 11 KV XLPE cable on double pole with GI pipe of size 8” dia including its jumpering complete with Clamps nut and bolts (G.I Pipe, Clamp, Nut & Bolts shall be provided by the contractor through approved vendor of UPPCL, Approx 10 Mtr. Per Hosting). Also make 10 mtr. cable loop and earthing of each cable (for double circuit).

Laying of (double circuit) L.T. Cable Aluminum(3.5x150 mmsq ) by trench less Technology method by Deep drilling System. The job includes the cost of HDPE Pipe 06” dia, excavation of Earth, laying of cable inside it. The work is to be carried out as per Govt. approved Drg. (HDPE pipe 2800 meter will be arranged and provided by the contractor through approved vendor of UPPCL).

Laying of (double circuit) L.T. Cable Aluminum( 3.5 x240 Sq.mm ) by trench less Technology method by Deep drilling System. The job includes the cost of HDPE Pipe 06” dia, excavation of Earth, laying of cable inside it. The work is to be carried out as per Govt. approved Drg. (HDPE pipe 180 meter will be provided and arranged by the contractor through approved vendor of UPPCL).

Laying of (double circuit) L.T. Cable Aluminum(3.5x70 mmsq) by trench less Technology method by Deep drilling System. The job includes the cost of HDPE Pipe 06” dia, excavation of Earth, laying of cable inside it. The work is to be carried out as per Govt. approved Drg. (HDPE pipe 6800 meter will be provided by the contractor through approved vendor of UPPCL).

Hoisting of L.T. Cable Aluminum (3.5x240 mmsq. Sq.mm) on double/single pole & Connect the Cable with T/F on T/F Plinth with GI pipe of size 6” dia including its jumpering complete with Clamps nut and bolts (G.I Pipe, Clamp, Nut & Bolts shall be provided by the contractor through approved vendor of UPPCL, Approx 6 Mtr. Per Hosting). Also earthing of each L.T. cable. (for double circuit).

Hoisting of L.T. Cable Aluminum (3.5x70 mmsq/ 3.5x150 Sq.mm) on double/single pole with GI pipe of size 6” dia & Connect the Cable with T/F on T/F Plinth including making connection to Distribution Box , jumpering complete with Clamps nut and bolts (G.I Pipe, Clamp, Nut & Bolts shall be provided by the contractor through approved vendor of UPPCL, Approx 6 Mtr. Per Hosting). Also earthing of each L.T. cable (for double circuit).

Fixing of danger board on each location and G.I. barbed wire including proper clamping as per RESSPO Norms.

Making of 33 KV straight through cable jointing terminations at joints at inspection window and both ends 33 KV straight Through cable boxes shall be provided by the department.

Making of 33 KV O/D cable jointing terminations at joints at inspection window and both ends 33 KV O/D cable boxes shall be provided by the department.

Making of 11 KV straight through cable jointing terminations at joints at inspection window and both ends 11 KV 3x300 Sq.mm Through cable boxes shall be provided by the department.

Making of 11 KV straight through cable jointing terminations at joints at inspection window and both ends 11 KV 3X185 Sq.mm Through cable boxes shall be provided by the department.

Making of 11 KV straight through cable jointing terminations at joints at inspection window and both ends 11 KV 3x70 Sq.mm Through cable boxes shall be provided by the department.

Making of 11 KV O/D cable jointing terminations at joints at inspection window and both ends 11 KV 11 KV 3x300 Sq.mm cable boxes shall be provided by the department.

Making of 11 KV O/D cable jointing terminations at joints at inspection window and both ends 11 KV 11 KV 3X185 Sq.mm cable boxes shall be provided by the department.

Making of 11 KV O/D cable jointing terminations at joints at inspection window and both ends 11 KV 11 KV 3x70 Sq.mm cable boxes shall be provided by the department.

Guarding of 33 KV , 11 KV Line

Fixing and Erection of DISTRIBUTION BOX 3- PHASE and connect all concerning service cables and arrangement complete in all respect.

CONSTRUCTION OF PLINTH OF TRANSFORMER (2M X2M X1.25 M) INCLUDING PROVIDING ALL REQUIRED MATERIAL COMPLETE IN ALL RESPECT.

WIREMESH FENCING OF TRANSFORMER FOR 25 KVA/63 KVA/100 KVA (AS PER NORMS) MATERIAL REQUIRED FOR CONSTRUCTION OF WIREMESH FENCING WILL BE PROVIDED AND ARRANGED BY THE CONTRACTOR.

EARTHING OF TRANSFORMERS INCLUDING PROVIDING ALL DECENTRALISED MATERIAL REQUIRED FOR COMPLETION OF WORK.

Dismentling of 30 no 11 kv line Corrsing lenth appox. 5900 Ckt. Mtr. along with accessories

Dismentling of 5 no 33 kv line Corrsing lenth appox.2000 Ckt. Mtr. along with accessories

Dismentling of 01 no lt line Corrsing lenth appox. 80 Ckt. Mtr. along with accessories

Back Cartage of following used/scrap (received by dismantling) from site to store centre, Nawada, Budaun including/unloading etc.

Recd. Back of 5 no 33 kv line lenth appox. 2000 Ckt. Mtr.

Recd. Back of 30 no 11kv line lenth appox. 5900 Ckt Mtr.

Back catrage of old Transformer 10 KVA/160 KVA from different work sites to store center, Baibagh Shahjahanpur including loading and unloading both side.

Back catrage of old Transformer 25 KVA from different work sites to store center, Baibagh Shahjahanpur including loading and unloading both side.

Recd. Back of 01 no LT line lenth appox. 80 Ckt. Mtr.

AMIT ENGINEERING CORPORATION

MLAPLNP Associates