Renovation work for Arulmigu Meshabureeswarar Thirukovil at Ulundhandarkoil Ulundurpettai Tk Kallakurichi Dt

Providing Scaffolding for vimanam raja gopuram with non flammebable materials wherever necessary for main form work and by providing coconut keeth as covering the areas & plat form for inspection etc all complete.

Vimanam Height upto 15'-0"

Vimanam / Gopuram upto 25’ - 0’ height

Gopurams upto 50’ - 0’ height

Dismantling Lime Concrete(W-0033)

Labour Charges for Old Stone Removing

Pavukkal (HR-W0007.Pg.no:292)

Ull Vari (HR-W0007.Pg.no:292)

Uthiram (HR-W0007.Pg.no:292)

Labour Charges for Old Stone Fixing

Ull Vari (HR-W0007.Pg.no:292)

Supply of new cut stones loading and unloading

Dressing and fixing

Pavukkal (SOR, Sl.no. HR-W0010 of pg.no. 261)

Bothiyal( SOR Sl.no. HR-W0010 of pg.no. 261)

Uthiram (SOR, Sl.no. HR-W0010 of pg.no. 261

Thun (SOR, Sl.no. HR-W001

Dismantling Plain Cement Concrete (SOR Sl.no. W-0034 of pg.no.28)

Dismantling of Brick / Stone Masonry in lime mortar walls under 3m high (SOR pg.no.21, Sl.no. W-0013),

Brick work in Lime MORTAR 1:2 mix using Country bricks ( 83/4"*41/4"*23/4") including labour chagersete complete complying the std specifications.

Abve basement

Plastering with Lime mortar 1:1.5 (One of Lime and One and HalfMsand), 12mm thick including cost and conveyance of all materials and all labour charges,curing etc,complete complying with standard specifications.

Thorough scrapping of old plastered surface (SOR SI.no. W-0106 of pg.no.32)

Painting two Coats Exterior Emulsion or egavarnam water Based painting Included cost of all materials and all labour charges ete,. complete as per stantard specification.

Weathering course with brick jelly lime concrete using 20mm brick jelly with pure slacked lime over R.C.C. roof slab in the proportion of32:12.5 and well watering consolidated with wooden beaters to slop including cost and conveyance of materials to site and labour charges etc

Finising the top ofthe roof with one course ofpressed tiles of size 20X20X2cm over a bed of Cement mortor 1:3 12mim thick mixed with water proofcompound at 2% b weight of cement including cost and conveyance of all materials to site and all labour charges etc

Restoration by providing herbal water wash and approrimats methodology to restore the originalities ofthe existing granite structure inclusive of hire charges scaffolding arrangements conveyance charges for tools & plants and machinaries to the workship spot and cleaning the site after completion of work ete

Pointing with Lime mortar 1:1.5 including all tools and plants and labour ete allcomplete for cut stone masonry.

Supplying and Filling with foundation and basement with M sand in 15cm. Thick layers well rammed & consolidated, including watering, complying with std.specification ete complete.

Paving with cut stone flooring using cut stone of size 600x600mm and 100mm thick and all the sides are machine cutting, top surface is neatly dressed and pointing with lime mortar 1:1.5 including all materials and labour charges.(Outer)

Supplying and fixing teak wood temple type door including all materials, labour charges for manufacturing and fixing I position including all furniture fittings ete complete with std specifications.

Painting two coats for newwood works such as other similar works ete, complete complying with std specification

Supplying and fixing of stainless steel Grill including the cost and conveyance of all materials and fixing in position including priming coat ete complete.

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in existing Powder coated MS Duet with door arrangments on wall and ceiling with MS accessories with Module GI switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 14 SWO Te wire fof Open MS duct Light point / fan point (for electronic regulator) (4 points / Coil) Higher End.DATA-1

Supply and fixing of single box type 1 x 20 W single LED-fitting complete with TW round blocks on wall or ceiling with bulb with PVC unsheathed Copper leads from terminals to the fitting. SD442

Supply and fixing of 1x40W LED Battern with LED (Higher end) on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting DATA-3

Supply and fixing of 30 W focus light with necessary wall grouting clamps with fixing bolts on ceiling with PVC unsheathed copper leads from terminals to the fitting. DATA-4

Supply and fixing of fancy glass shade and 15W LED BH point.(SD-80)

upply and fixing of faney glass shade and 7W / 9W LED bulb.(SD-7

Supply and fixing of 50 W flood light with necessary wall grouting clamps with fixing bolts on ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end).DATА-5

Supply and fixing of 100W flood light with integrated driver with necessary wall grouting clamps with fixing bolts on ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end).DATA6

Supply and fixing of 1 no.6A two module 5 pin socket, 1 no. 6A one module switch on suitable module surface mounting Box (GI) with module cover plate (plastic) on wall with connections. Higher End Ea 630.00 2320.00 (SD 376)

Supply.and fixing of 2 nos.6A two module 5 pin socket, 2 nos. 6A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (plastic) on wall with connections. Lower End (SD 381)

Supply and fixing of 1 no.6/16A two module socket, 1 no. 16A one module switch on suitable module surface mounting Box (GI) with module cover plate (plastic) on wall with connections. Higher End (SD 400)

Supply and fixing of 450 mm (18") sweep wall mounting fan (Higher end) on suitable special type clamps with bolts nuts and nitrile rubber over the stone surface with necessary arrangements and testing complete.DATA-7

Supply and fixing of 375mm(15") sweep (lightduty) AC exhaust fan complete with necessary wallopening and makingof the wall.(SD-116)

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep light duty AC Exhaust fan.(SD-121

Supply and run of 35mm x 20mm powder coated duct with door arrangements complete with MS angle and bolt & nuts Complete.DATA-8

Supply and run of 35mm x 45mm powder coated duct with door arrangements complete with MS angle and bolt & nuts Complete.DAТА-9

Supply and fixing of MS clamps of size 14' x 14' on pillar with suitable Bolt/nuts and painting of suitable colour. DATA-10

Supply and run of 2 of 1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC pipe on the existing cable tray with suitable clamps.DATA-11

Supply and run of 2 of 2.5 sq.mm (36/0.3) PVC insulated SC unsheated copper conductor of 110V grade in the existing duting with continous earth wire connection by 2.5 sq mm PVC insulated SC unsheated copper wire.DATA-12

Supply and run of 2 of 4 sq.mm (36/0.3) PVC insulated SC unsheated copper conductor of 110V grade in the existing duting with continous earth wire connection by 2sq mm PVC insulated SC unsheated copper wire.DATА-13

Supply and clamping of 4 x 16 sq.mm PVC LTUG armoured Alu cable on post or on wallwith MS Clamps.(SD (204)

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(SD-669)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD 522)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wallwith earth connection only. Higher End. (SD-527)

Supply and fixing of 6 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal door) with 1 no. 63A 4P MCB Isolator as incoming and 18 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End.DATA-14

Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(SD-669)

Supply and clarnping of 3 1/2 x 35sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.(SD-206)

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection (SD-16

Supply and providing cable end termination of 3 1/2x35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping ete with electrical connection complete.(SD-224)

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .(SD 457)

Supply and Fixing of Sintex Box (SMC) with 1 no.6-32A SP MCB,16A bakelite connector on a hylem sheet with interconnection complete.(For Street light/Focus/Flood lights).DATA-15(For Street Light)

Supply and clamping of 4 x10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.(SD-203)(For Street Light)

Supplyand laying of 4x10sq.mmPVCarmouredLTUGeable inatrench to be excavated at a depth of 0.75 metre putting 0.15metre layer of sandandcovering the cable completely with bricks and sand and refilling theearthto make good(SD-180)

Supply and fixing of brass cable gland for 4 x 10 sq.mm. PVC LTUG armoured cable with earth connection.DATA-16

Supply and clamping of 2x10 sq.mm. PVC LTUG armoured cable on post Mtrs or on wall with MS clamps.(SD-199)

Supply and Laying of 2x10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. DATA -17

Supply and fixing of brass cable gland for 2x10 sq.mm. PVC armoured LTUG cable with earth connection.(SD-160)

Supply and fixing of 100 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only. (SD-658)

Supply and fixing of 100A (500V) 3 Phase meter Box fabricated with 16 SWG CRCA Powder coated MS box sheet comprising of with 3 nos.of 100A fuse units, 1 no. 100A FP MCB, provision for fixing TNEB meter with inter connections and with required accessories on wall complete.(Higher End).DATA-18

Supply and fixing of 4 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40ADP MCB Isolator as incoming and 4 nos. 6A to 32A SP MCB a outgoing on wall with earth connection only. (Higher End) DATA-19

Supply and fixing of 6 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board (with MCCB Incomer) with double door (metal door) with 1 no. 160 A 4P MCCB switch as incoming and 4nos. 63A 3P MCB, 6 nos. 6A to 32A SP MCB as outgoing with suitable cable end box on wall with earth connection only. Higher End (SD608) 615

Earthing as per the PWD standard with an earth electrode of 2mt class 'B' GI pipe of dia not less than 32mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD 222)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall/floor/ground for earth connection (SD 372).

sub total

Please Enable Macros to View BoQ information