Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹3.8 LAdmitted-Finance | -29.07% | ₹3.8 L | L1 | Admitted-Finance |
| 2 | L2₹4.0 L+₹20,762 (5.47%)Admitted-Finance | -25.19% | ₹4.0 L+₹20,762 (5.47%) | L2 | Admitted-Finance |
| 3 | L3₹4.3 L+₹47,945 (12.6%)Admitted-Finance | -20.11% | ₹4.3 L+₹47,945 (12.6%) | L3 | Admitted-Finance |
| 4 | L4₹4.6 L+₹77,108 (20.3%)Admitted-Finance | -14.66% | ₹4.6 L+₹77,108 (20.3%) | L4 | Admitted-Finance |
| 5 | L5₹5.1 L+₹1.3 L (34.6%)Admitted-Finance | -4.50% | ₹5.1 L+₹1.3 L (34.6%) | L5 | Admitted-Finance |
Tender Value
₹5.4 L
EMD Value
₹10,702
Closing Date
10 Sept 2026, 3:00 pmClosed
Executive Engineer
Office of Executive Engineer, SWBDCMD, PWD, B-6, NCC Building, Safdarjung Enclave, New Delhi
EOR to Ch. Brahm Prakash Ayurvedic Charak Sansthan CBPACS, Khera Dabar, New Delhi SH- Providing and Fixing wooden panel work in director - Principal office.
2026_PWD_297887_1
34/EE/SWBDCMD/2026-27
Open Tender
Civil Works
Works
60 days
B-6 NCC Building Safdarjung Enclave
Please refer Tender documents.
13 documents required · 13 mandatory
₹0
₹10,702
16 Sept 2026
2 Sept 2026
10 Sept 2026
2 Sept 2026
10 Sept 2026
2 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 18 mm thick | 27 | sqm | 1,020.95 | ₹27,565.65 |
| 2 | Providing and fixing bright finished brass handles with screws etc. complete : 100 mm | 8 | each | 234.7 | ₹1,877.6 |
| 3 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge. | 8 | one set | 414.2 | ₹3,313.6 |
| 4 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick | 50 | sqm | 897.3 | ₹44,865 |
| 5 | GST @ 0.973 multiplying factor on DSR 2023 (On Rs. 77,623/-) | 1 | each | 2,096 | ₹2,096 |
| 6 | Add Cost Index @ 4.03% (On Rs. 75,527/-) | 1 | each | 3,044 | ₹3,044 |
| 7 | Providing and fixing “RAJSHRI” PVC SHEET WALL PANELLING of EQUIVALENT of thickness 5mm (+0.25) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm (+0.25) thick Prelam PVC sheet. The panel & strips shall be Density of 600 Kg/Cbm Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10" between two PVC strips. The PVC strips shall be fixed to the wall using 65mm Iong M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm ( +0.25 ) thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are jointed, using solvent cement. | 98 | sqm | 2,303.95 | ₹2,25,787.1 |
| 8 | Providing and fixing 3 mm Thick polish finished wooden Edge Banding as per direction of Engineer-in-Charge. | 40 | meter | 68.75 | ₹2,750 |
| 9 | Providing and fixing BOSE SS 304 Stainless steel soft-close cabinet Hinges - 1 Set (2 Nos) as per direction of Engineer-in-Charge. | 8 | Nos. | 374.75 | ₹2,998 |
| 10 | Providing and fixing 1.2 mm sheet 304 grade stainless steel signages of average width of each letter 150mm or less as per requirement with laser etching process and upto three colour filling/ buffing, weatherproof UV coating etc. all complete as per direction of Engineer-in-charge. (Each word to be measured separately). | 24 | meter | 8,174.85 | ₹1,96,196.4 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.82 MB
BOQ_397016.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .