8816/GWL/E8 SPECIAL REPAIR TO MES INSTALLATION BOOSTER PUMP HOUSE AND SEWAGE INSTALLATION AT AGE B/R-II UNDER GE GWALIOR

Amount

Excavation over area as in soft / loose soil nexc 1.5 m deep and getting out complete all as specified and as directed.

Surface Excavtion n.exc 30 cm deep avg.15cm in Hard /dense type soil and getting out complete all as specified and directed.

Add or deduct above item for every 3 cm or part thereof above or below 15cm average complete all as specified and directed.

Rolling and consolidating formation surfaces in cutting with power roller of capacity exc 8 tonne and n.exc 12 tonne.

M&L moorum /red bajri filling in floors or paving laid in layers n exc 15cm thick spread leveled and rammed including watering complete all as specified and directed by Engineer in charge.

M&L PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete complete.

M&L for PCC 100 mm thick (1:2:4) type B-2, (using 40 mm graded stone aggregate) as in floor, finished even and rough complete all as specified and directed.

M&L for forming constrution joint 30 mm deep X 10 mm wide filled with sealing compound of Grade 'B'.

M&L for forming contraction (dummy ) joint 65 mm deep X 10 mm wide filled with sealing compound of Grade 'B'.

Excavating in trenches in any type of soil , n exc 1.5 m wide and exc. 1.5 m in deep and n.exc 3.0m deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out soil complete all as specified and as directed.

Returning, filling in, including spreading ,leveling, watering and well ramming in layers n. exc 25 cm with soil complete all as specified and as directed.

Removal of excavated material (soil) to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar in existing manholes / septic tank, sumps ,soakage pits including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed.

M& L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius, in half brick work built in cement mortar 1:4 complete all as specified and as directed.

Excavating in posts holes (or similar holes) in hard/dense soil each n.exc 0.50 cu.m getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm watering, and removing surplus soil to a distance n.exc 50m and making good surface complete all as directed by Engineer -in -charge.

M/L for providing PCC 1:3:6 type C2 using (40mm graded stone aggregate) in foundation filling and mass concrete complete all as directed by Engineer -in -charge.

M&L Hand rails, half round or other stock section or core for wooden hand rail straight portion , drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing post including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe 290 Gde E 165 with and including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and directed

Supply only, chain link fencing of MS galvanized fencing, any size or type complete all as directed by Engineer -in -charge.

Fixing only chain link fencing including line wires, any mesh , size and type fixed to any type of standards, rails, straining bolts, etc., incliding provision of binding wire complete all as specified and directed Note : Supply only chain link fencing and line wire will be measeured and paid separetly.

S&F mild steel round bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooking ends stiffeners confirming to Fe 290 (Gde E-165) complete all as directed by Engineer -in -charge.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt exc 5cm but n.exc 10cm long and dia of neck 11 to 15mm complete all as directed by Engineer -in -charge.

M&L applying for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of new surfaces.

Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed.

S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm corrugated steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as directed by Engineer -in -charge.

S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm plain steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding (ridge) to wall fixed with self tapping screws complete all as directed .

Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.

S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 ( Gde E-165) complete all as specified and directed ( Make as per primary producer only mentioned in Particular specification or in Tender Documents)

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of new surfaces.

M&L two coat of synthetic enamel paint over coat of Red oxide primer over Old steel surfaces nexc 10 cm width or girth complete.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and counter shunk for screw, including bending and welding angle necessary gusset plate riveting etc n exc. 10 kg each brackets confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for reinforced cement concrete nominal mix type B1 (1:2:4) ( using 20 mm graded stone aggregate ) as in slab supported on walls ,beams, coumnns in floor , roof , landing complete all as specified and directed.

M&L for reinforced cement concrete nominal mix type B1 (1:2:4) ( using 20 mm graded stone aggregate ) as in foundations, including rafts, footings, foundation beams , plinth beams , base for coloumns and mass concrete etc. complete all as specified and directed.

M&L for reinforced cement concrete nominal mix type B1 (1:2:4) ( using 20 mm graded stone aggregate ) as in beams , cantilevers bressummers , lintel over 1.5 m span etc. complete all as specified and directed.

M&L for use and waste formwork to sides of concrete foundation , footing, base of coulmn , raft, raft beam sides and soffits of foundation and plinth beam for rough finished surfaces of concrete complete all as specified and directed

M&L for use and waste Formwork to sides & soffits of floor or roof beam rough finished surfaces of concrete complete all as specified and directed .

M&L use and waste formwork to soffits of suspended slabs such as roof slabs , floor slabs , landings and similar works , not exceeding 200 mm thick ( horizontal or sloping ) including slab edges for rough finished surfaces of concrete complete all as specified and directed

S&F TMT bars 6 to 8 mm dia cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S.

S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410-0 or Fe-310-0, , complete all as specified and directed.

Material and labour for machine made ,1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles , 60mm thick of grade M-35, of any shape or shap and designe as approved, with colour pigment , laid over sand cusion fixed as in floors/ paths/ pavings etc, complete all as specified and directed. Note : Sand Cusion shall be measured and paid in separate item

Material and labour for machine made ,1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles , 80mm thick of grade M-35, of any shape or shap and designe as approved, with colour pigment , laid over sand cusion fixed as in floors/ paths/ pavings etc, complete all as specified and directed. Note : Sand Cusion shall be measured and paid in separate item

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed .

M&L for cement concrete ( 1:2:4) type B-1 (20mm graded agrregate) in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed.

Demolition of wall and ceiling boards fibre pulp insulation etc or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed.

S&F False ceiling 4 mm thick HPSC pre-prime non asbestos fibre cement building board ( size 600mm x 600 mm/ 595 mm x595 mm ) decorative finish fixed with clips and screw including powder coated galvanised MS grid frame work false ceiling of ( Main Tee size 32mmx24mmx0.55mm cross tee 24mmx24mmx0.38mm ) and with slot for fixing including suspended with 2mm dia. GI wire hangers fixed with steel dash through fasteners from purline of the roof complete all as specified and as directed.

M&L for cutting bushes, wages, hages, rubish etc surrounding/ roof of the buildings ilcluding all necessary levelling / dressing / cutting etc required on ground and removing upto 1.50km from MOD land complete all as specified and directed.

M&L for 10 mm thick rendering in CM (1:4) over roof ,surface finished even and rough mixed with water proofing compond complete all as speceified and as directed by engineer- in charge . Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as "supply only "

Supply only Liquid water proofing compound complete.

S&F in repairsFor applying water proofing treatment with the following coats :- (a) First coat of bitumen primer conforming to IS -3384 @ 0.4 Kg/sqm (b) Second Layer of APP based polymectric membrane minimum weighing 3kg /sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms /sqm ) laid on primed surface by torch application complete all as specified and as directed by engineer in charge.

M & L for cutting grooves in brick wall/ RCC, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete.

M & L PCC (1:2:4) Type Bo using 12.5 mm graded stone agg as levelling course/mass concrete complete all as spd and directed.

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

S&F solid PVC door frame of size 50mm×47 mm made out of 5 mm pre laminated colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails M.S frame shall be covered with heat moulded pre lam colour PVC 'C' channel having a PVC shut strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail& bottom rail, panelling of pre lamanited colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement.

All as per above but above but wire guage panel i.e. panel should be wire guage in lieu of PVC sheet panel. Wire guage shall be wraped on a additional square tube 8mm M.S. solid tube and tube shall be welded to M.S. tube. and wire guage shall be strechted tightly firmed complete all as specified and as directed.

S&F 30mm thick Flush shutters ,soild core construction ,with paticle board core and plywood face panels , commercial type complete all as specified and directed.

S/F Factory made Solid PVC Moulded door shutter ,28 mm to 30 mm thick(stiles) with 2,4,or 6 raised panel design with 2 mm thick moulded Prelam PVC sheet on the front face & 2 mm prelame PVC Sheet on back face complete all as specified and directed..

S&F 3mm thick, plain glass pin head type and glazing with oil putty,silicone or wooden beads, in square not exceeding 0.5 sqm in each pane including hacking out old broken glass of any thickness and any description from wooden/ steel frame/ stone,concrete or brick surrounds complete all as specified and directed.

S&F in repair galvanised wire cloth, 0.48 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised staples complete all as specified and directed

S&F 3mm thick, ordinary glass pin head type and glazing with oil putty,silicone or wooden beads, in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

M&L preperation of new wooden surface and applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surface any description not otherwise described over 10 cm width or girth and complete all as specified and directed.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator (adequate track) without sash, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters of aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, powder coated aluminium handles 150mm size 2 Nos, 3 Nos powder coated aluminium hinges heavy duty and 02 Nos 150mm long powder coated aluminium tower bolts in each door shutter with powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board etc. shall be measure and paid for separately.

S & F for door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed

S&F galvanised wire cloth, 0.48mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised staples complete all as specified and directed

Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete.

S&F for 18 mm thick PVC Celuka ply of one side prelaminated and other side plain white colour fixed with screws ,solvent cement /adehesive complete all as specified .

S&F for 12 mm thick PVC Celuka ply of both side plain white colour fixed with screws ,solvent cement /adehesive complete all as specified .

S&F Aluminium anodised barrel tower bolt of 200mm of extruded section complete

S&F Aluminium anodised barrel tower bolt of 150mm of extruded section complete

S&F for Haps and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin of 100 mm size sixed with screw complete all as specified .

S & F Magnate catcher of metal body and striking plate heavy duty includind fixed with screw complete.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvenised of not exc 25 mm flaps complete.

S&F MS Sliding door bolts Rod pattern stove enamelled black with bolts not less than 12mm dia with and including a minimum of 6 bolt and nuts four on bolt plate and two on staple plate of 250mm size complete.

S&F Allu butt hinges of 100mm size type C-22 complete.

S&F Extruded aluminium alloy handle of 125mm size fabricated type, anodised.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

Demolition of cement concrete of any description and in any position reinforced concrete (re-inforcement cut to facilitate demolition) including disposal of unserviceable of mateial complete all as specified and directed. Note:Demolition material throughout MOD Land rate include above item

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado, pcc tiles at roof etc. laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) Type C2 using 40mm graded stone agg as in plinth protection/Path etc surface even and smooth without using extra cement complete all as specified and as diected by engineer in charge.

M&L 25 mm thick cement concrete (1:2:4) type B-0 (12.5 mm graded stone aggregate) as in floors,finish rough to receive th\e floor finishes etc

M&L Granite slab 18 mm to 20 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing all as specified and directed..

M&L for machine cut Kota stone slab 20mm to 25 mm thick , as in flooring , laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing , over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:3 ) complete all as specified and directed.

M&L for machine cut kota stone slab 20mm -25 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:3) complete all as specified and directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set over and including 15 mm thick cement screed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for ceramic tiles, joint free, coloured tiles 7mm to 8 mm mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:3) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.with the colour of tiles complete all as specified and directed.

M&L for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.

M&L for non skid ceramic Coloured tiles, 300mmx300mmx 6 mm to 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar( 1:6) complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc.complete.

M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as "supply only "

M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered sufaces of walls & applying 2 coat of cement base paint complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed.

M & L two coat of oil bound distemper over a coat of Birla wall care putty on plastered surfaces on wall incl. preparation of surfaces etc.

Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean including filling depessions of scapped surface with putty and pereparation of surface for further treatment and M&L for two coats of distemper oil emlusion white or tinted over a one coat of wall care putty on walls complete all as specified and dircted by Engr-in -Charge

Material and labour for Preparation of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying Two coat of white wash complete all as specified and directed by Engineer -in-Charge.

M&L complete removal of existiong treatment (internal and external) on walls by scrapping with steel wire brushing, scraping down smoke soot/ plants roof from wall/chhajjas and applying two coat of cement based paint on walls including preparation of old plastered or un plastered surface comlete all as speified and directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe.

Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 25mm bore of pipe, complete all as specified and directed.

S & F 20 mm dia steel tubing and connection galvanized with all fittings medium grade tube in floors, walls and ceiling etc

S & F 25mm dia steel tubing and connection galvanized with all fittings medium grade tube in floors, walls and ceiling etc

S&F in repairs 110mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed to walls.

S&F 75 in repairs mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed in Wall/laid in floor .

S&F 110mm dia PVC(SWR)pipes bends any radious with acces door complete.

S&F 75 mm dia PVC(SWR)pipes bends any radious.with acces door complete.

S&F 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door complete.

S&F 110mm dia PVC(SWR) vent cowl

M & L 75 mm dia of out let PVC (SWR) floor trap plain with cp grating incl. jointing with solvent cement as in repair

S&F 15mm angle cock chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair.

S&F 15mm ,bib tap Fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair.

Supply only 15mm,pillar taps fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe.make : Neptune series of prayag or equivalent.

S&F of vitreous china wash basin, white,oval type, size 550 x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. Note : Pillar tap and PVC connection will be measured paid as supply only.

Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm.

S&F Soap dish of CP fixed with pvc rawal plugs and screw complete.

S&F in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed.

S & F Peg set of six S.S. fixed to wall with PVC plugs and screw complete.

S & F in repair Curtain rail stainless steel decorative type 25 mm dia including fixing bracket and end knobs complete specified and diected by engineer in charge.

Dismantling water tanks of any description and in any position , of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

S&F Rotational moulded poly-ethylene Three layered antibactrial film tanks (cylinderical vertical ) 500 litres capacity, white colour hoisted and fixed in position complete all as specified and directed.

S & F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms)

S & F in repair gun metal globe / gate value with iron wheel head screwed both ends for iron pipe of 20mm bore all as specified.

M&L ,Prepartion of New/Old plastered surfaces of walls ,chajjas and applying two coats of weather proof water based emulsion paint (Acrylic paint exterior grade )complete all as specified and directed in by engineer in charge.

S&F floor door stopper of aluminium alloy body and tongue ,anodised with hard drawn steel spring,150mm long, fixed in floor .

M&L for preparation surfaces for building Nos and applying one coat of synthetic enamel paint and writing letters or figures (Block, Roman, Italic or Indian) of n exc 10cm height, width of letter shall not be less than 15mm, including stops, commas, lines, brackets and making outer boarder with approved tint of synthetic enamel thick paint complete all as specified and as directed.

Dismantling Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as directed .

M & L Providing precast cement concrete louvres and jallies, 25mm thick (measured solid) Type B0 (1:2:4 12.5mm graded aggregate set in CM 1:6, including all mould- ings but excluding frame complete all as directed .

M&L Providing precast cement concrete Type C1 (1:3:6 20 mm graded aggregate) in win- dow or door cills, ntels,bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, Watherings, throat- ing etc. and setting in mortar complete with joints to match

S&F for in repairs vitreous china urinals, Half stall type ,white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F for in repairs Heatth Faucet with one meter PVC flexible body pipe of CP including fixing bracket, complete all as specified and directed.

S&F for as in repair viterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts,flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified and directed.

S&F in reapir plastic water closet seat covered white coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devise complete all as specified and directed.

M&L for vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor, complete all as specified and directed.

S&F for in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed.

S&F in repairs Steel Rolling shutter 1.25 mm thick without ball bearing gear operated type including top cover, anchoring rod, haspe and staple and one shop primer, erected in position as indicated,complete all as specified and as directed

Ditto item above but gear operated type with bevel gear box and crank handle

S&F ball bearing for rolling shutter

S&F safety lever locks mild steel with 4 lever for rolling shutter

M.S. ENGINEERS

Babatia super works

M/S SANJAY AGARWAL

m/s yadav builders

M/S NIRMAL SINGH DHANJAL

M/s Subhash Construction Co.

M/s Ratan Lal Jain and Co.

M/s Himgiri construction