SPECIAL REPAIR TO BLDG NO T-1 (CDTS DORMITARY) AT RMS CHAIL UNDER GE JUTOGH

Amount

Dismantling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern in roof covering, compete all as specified and directed.

Dismantling structural steel work including doors gates but excluding framed truss etc complete all as specified and directed.

S&F framed work such as grills, gratings, etc.,with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladder; framed baluster; walk ways; railing; framework of watertanks staging and similar work conforming to Fe-290. Gde-E-165 compete all as specified and directed.

M&L for MS Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W (Gde-E-250) quality B, compete all as specified and directed.

Dismantling timber scantlings over 40 sq cm in section in any position (unframed work) complete all as specified and directed.

Dismantling timber scantlings framed work in fillets, frame work of cup board, rails, posts rafters, purlins, etc under 40 sq cm in section in any position fixed with nails etc complete all as specified and directed.

M&L for IInd class hard wood timber scantling clean sawn secured with nails timber framed and fixed in framed work complete all as specified and directed

M&L for preparation of wood and wood based materials and applying two coats of creosote on new or old wood surface of any description and girth complete all as specified and directed.

S&F 18-19 mm thick pre laminated particle board, interior grade, pre laminated both sides with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M&L for IInd class hard wood plain fillets exc 13 & n.exc 25 sqcm rectangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

M&L for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws compete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall eaves board etc., fixed with self tapping screws compete all as specified and directed.

S&F PVC coated gypsum ceiling placed in false ceiling grid made of anodised aluminium snap grid frame work for false ceiling,size of grid 605 X 605 mm & hangers 6 mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long fixed incl dismantling old unserviceable ceiling complete all as specified complete all as specified .

S&F 2nd class hard wood boarding 40mm thick, as in wooden flooring and skirting planed one side with butt joints and fixed with nails incl dismantling old unserviseable wooden flooring, complete all as specified and directed.

Taking down chowkat or frames with shutters without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description n. exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

M&L for IInd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 2nd class hard wood factory made paneled shutters 35mm thick (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces the size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed.

S&F 2nd class hardwood Glazed and skeleton shutter 35 mm thick, open rebated and prepared to receive glass, gauge etc, (without sash bar), edges of framing plain or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chowkat etc compete all as specified and directed.

S&F 35mm thick (factory made) glazed and skeleton shutter open rebated and prepared to receive glass gauge etc divided into square, with plain, chamfered or rounded mitered and rebated sash bars any numbers for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) of IInd class hard wood complete all as specified and directed

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing complete all as specified and directed.

S&F aluminium handles, cast type, anodised 150 mm size compete all as specified and directed.

S&F 200 mm aluminium anodised barrel tower bolt of extruded section and fixed, compete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple including wooden beading complete all as specified and directed.

S&F butt hinges 75 mm size medium weight cold rolled mild steel compete all as specified and directed.

S&F mild steel barrel tower bolt 150mm long stove enameled black with bright bolt complete all as specified and directed

S&F 300mm long mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F 150mm long mild steel pressed handle stove enameled black oval type complete all as specified and directed

S&F 125mm long mild steel pressed handle stove enameled black oval type complete all as specified and directed

S&F 300 mm long brass sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 200 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed

S & F 300mm brass ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F sheet glass 4mm thick Figured glass, pin head type and glazing with oil putty or wooden bead in squares n exc 0.5 sq. m in each, compete all as specified and directed.

Demolition of cement concrete un-reinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level, complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection, path, hardstanding, finished concrete surfaces even and smooth without using extra cement, complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with eater etc, of any height including necessary scaffolding and T&P required to complete the work complete all as specified and directed.

M&L for rendering 15 mm thick on fair surfaces of brickwork or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement at any height complete all as specified and directed.

M & L for rendering 15mm thick on other than fair faces of brick work or concrete surface in CM 1:4 surface finished even and smooth without using extra cement, at any height complete all as specified and directed.

M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in surface channels and drains including necessay form work complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 80 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc,complete all as specified and directed.

Dismantling of floor hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300x450x7mm thick fixed over and including 10mm thick rendering in CM 1:4 on vertical surface such as skirting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the existing surface complete all as specified.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles/ made finish 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M & L for chequered cement concrete tiles rubber moulded pre polished with lacquar finish pre polished glossy finish 30cm x 30cm x 22-25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors laid over and incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 18-20mm thick granite slab (of any type) work (table rubbed and polished) in plateform,urinal prtition and the like fixed with and incl screed bed 15mm thick in CM 1:4 including pointing in white cement 1:2 using marble dustand admixture of pigment to match the shade of granite including circular cutting or notching for fixing WHB and counter, complete all as specified and directed.

Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of size 550x400mm including brackets, CP brass coupling, CP pillar tap 15mm dia and PVC waste pipe complete all as specified and directed

Dismantling cast iron work of any description complete all as specified and directed

S & F 75mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed

S & F 100mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed

M & L for 75mm bore dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed

S & F in repair 15mm bore, bib taps fancy type cast copper alloy chromium plated screwed down screwed for iron pipe, complete all as specified and directed

S & F in repair 15mm bore Stop valves cast copper alloy, chromium plated, screwed down high pre-ssure with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and directed

S & F 15mm size PVC connections with PTMT nuts of length 450mm complete all as specified

S & F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified

Taking up or down 15mm bore, steel water tubing & connections complete all as specified and directed.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

Taking up or down 20mm bore, steel water tubing & connections complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ CI trap, cement concrete bedding and making good floor complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type low level flushing cistern, white with inlet ball valve , float handle , including brackets 10 ltr capacity including 32 mm PVC flush pipe complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm wide or girth incl preparation of surface etc., compete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over and including a coat of 2-3mm thick wall care putty on plastered surface complete all as specified and direceted.

M&L for preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing old previously treated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for complete removal of existing treatment from walls and applying two coats of weather proof anti fungal exterier emulsion paint on external surfaces including a coat of alkali resistant priming paint at any height of building / tower complete all as specified and directed.

M&L for cleaning & preparing the surface and applying french polishing on surfaces of any description width & girth including a coat of wood filler on new works with two or more coats complete all as specified and directed

All as per item No.75 above but on old/ previously treatedsurface of any description width & girth complete all as specified and directed

S&F in repair stainless steel 25mm dia drapery rods for curtains incl stainless steel decorative end knobs and brackets (wall to wall or flush to wall) for securing curtain rod complete all as specified and directed

M&L for cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or PCC (1:2:4) type B-1, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall not exc. half brick complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F in repair PVC (SWR) bend any radius of 110mm bore fitted with oval access door complete all as specified and directed

M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for taking credit to be measured separetly including making good the disturbed portion/surface complete all as specified and directed

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with PVC concealed Conduit with fixing accessories for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl. continuous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly all as specified and directed.

All as per item No 83.00 above but for one 3/5 pin socket 5 Amp on same board complete all as specified and directed

All as per item No 83.00 above but for one 3/5 pin socket 5 Amp on independent board complete all as specified and directed

All as per item No 83.00 above but for 3 pins socket outlet 15A independent with 4 sq mm wire and 4 sqmm earth wire complete all as specified and directed.

S&F switch piano flush type, 5 Amps, single pole one way complete all as specified and directed

S&F switch piano flush type, 15 Amps, single pole one way complete all as specified and directed

S&F Socket outlet 2 in 1, 3 pin, 5A (multi purpose) complete all as specified and directed

S&F Socket outlet 2 in 1, 3 pin, 5/15A (multi purpose) complete all as specified and directed

S&F ceiling rose, PVC/ Polycarbonate isolated body, surface backlite, 65x50mm three terminals complete all as specified and directed

S&F lamp holder PVC/ Polycarbonate type with back plate suitable for LED Lamp, incl LED Bulbs 9/10W B-22 Pin type, complete all as specified and directed

S&F in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make Polycab Cat Part No PCGLBLP 40 E 57/ Crompton Cat Part No LCPL-36-CDL/ Bajaj Cat Part No-BZRSQL 36W GZi WH LED or equivalent in Appx 'A' List of Makes.

S&F LED lights fitting 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with 3core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Havells Cat part No ENDURALINEARNEOBS20WLED840SPCWH/ Polycab Cat part No INTENSO AX LED BATTEN 4FEET 20W/ Crompton cat part No LCCLB-24-CDL/ Bajaj Cat Part No BCLSBAL 20W CW or equivalent in Appx 'A' List of Makes.

M&L for replacement for submain wiring with 2X10.0 Sqmm + 1X10.0 Sqmm Earth Wire single core PVC insulated FRLS PVC sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC casing & caping as per site requirement with all accessories complete all as specified and directed. Note: Three runs of copper wire for phase , neutral, earth & one run PVC casing shall be measured as one unit length.

M&L for replacement for submain wiring with 2X16.0 Sqmm + 1X16.0 Sqmm Earth Wire single core PVC insulated FRLS PVC sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC casing & caping as per site requirement with all accessories complete all as specified and directed. Note: Three runs of copper wire for phase , neutral, earth & one run PVC casing shall be measured as one unit length.

S&F in repairs VTPN 4 way double door prewired distribution board TPN-DPX 125 MCCB including one No MCCB 125 Amps, 25 kA, 4 pole as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way complete as specified and all as directed. Note : 1. Rates of MCCB shall deemed to be included in the quoted rates. 2. MCB SPN/SP/TP will be measured seperatly.

S & F in repairs Distribution board (DB's) 12 way SPN double door with 200Amps busbar, Neutral link, having sheet metal enclosures for suitable for MCBs 240 V, 50 Hz complete as specified and directed.

S & F in repairs Distribution board (DB's) 8 way SPN double door with 200Amps busbar, Neutral link, having sheet metal enclosures for suitable for MCBs 240 V, 50 Hz complete as specified and directed.

S&F in repairs RCBOs for earth leakage protection, overload & short- circuit protection 2pole, 32A rating, 300mA capacity suitable for 240 Volts complete all as specified by Engr-in charge.

S&F in repairs MCB SPN 6-32 amp rating 240V, 10KA of poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete as specified and all as directed.

S&F in repairs MCB SP 6-32 amp rating 240V, 10KA of poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete as specified and all as directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers shutter with fastner nut bolts washer etc complete including eletrical connection withncopper cable from ceiling rose to exhaust fan including taking down old exhaust fan to MES store yard complete as specified and all as directed.

S&F in repairs LED building secuity light 25 watt complete with brand including taking down old fittings complete as specified and all as directed. Make Polycab Cat Part No PCGLS T1 25 N/ Crompton Cat Part No LSTS-25-CDL/ Bajaj Cat Part No BCLST 25W LED or equivalent in Appx 'A' List of Makes.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3½ core including taking down old unsv cable complete as specified and all as directed.

Supply, fixing or laying HDPE (DWC) tubing 50 mm dia as per IS:16205 part 24 fixing on poles, walls under floors, laying on surface etc as reqd at site complete as specified and all as directed. Note: Rate for all accessories such as bend, joints, nut bolts, clamps deemed to be included in quoted rates.

M&L for earthing complete with copper plate electrode 600 x 600 x 3.15 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to 20 x 3mm copper strip as earthing lead with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point, including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed.

R. P. Suppliers and Construction Co.

Pankaj Builders