CERTAIN REPAIR TO MD OFFRS ACCN AND TECH AREA AT AIR FORCE STATION AMRITSAR

Amount

B/R PORTION

Excavating in post holes( or similar holes) each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth of broken rubble mixed with earth around , in layers not exceeding 25 cm, watring, and removing surplus soil to a distance n.exc 50 m and making good surface

M&L Brick work with sub class "B" bricks, straight or curved on plan exc 6 m mean radius , built in CM 1:4 complete all as specified and directed .

S&F glazed and skeleton shutters 35mm thick of 2nd class hard wood open rebated and prepared to receive gauge & glass etc with edge of sash bar and number edges of framing plain chamfered beads for securing glass etc size of number of shutters as spd SSR Part-I & section 8 clause 8.23 & (b) complete all as spd

Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats and removing to store as spd

Taking down chowkats or frame with shutter exc 1.50sqm but n.exc 4Sqm each (without taking off shutter from the chowkats) and making good the ditrubed surface complete all as spd and directed

Taking down shutters of any description n. exc 1.00 Sqm each

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm

S&F Aluminium anodized barel tower bolt of extrud sec 200 mm long Isi marked

S&F in repair 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast or ectruded sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed all as specified and directed.

S&F butt hinges med weight cold rolled stainless steel 100mm size

S&F aluminium alloyed handle fabricated type anodized of size 150 mm long

S&F Mortice lock, vertical type, size 100 mm made of brass with 4- lever complete fixed to aluminum/wooden doors complete all as specified and directed by Engrs-in-Charge.

S&F in repairs door closer hydraulicaly regulated (sliding type newly type), aluminium(Die cast ) body Designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in repair in steel frame or in wooden frame of door/ window with MS flat with screw or wooden beading where required and match the surface complete as specified and directed.

S&F joist, channel, steel tube of any size as per requirement (IS Ref 1161:1998) sections fixed independently, with or without connecting plates etc. for compression members of shed with riveted, bolted or welded attachment complete all as specified and directed by Enge in charge.

S&F pre-painted galvatume aluminium zinc coating (az150) GI based corrugated steel sheet of thickness 0.5mm thick of any colour having tensile strength of 550 Mpa in roofcovering/wall cladding, fixed withself tapping screws/fastners as per manufacturers instruction complete all as specified and directed

M&L for cutting or uprooting grass on old mud phuska , removing rubbish off from the premises , cleaning surface and preparation pf surface to remove brick tiles

M&L for 40mm thick brick tiles laid 15mm, 1:6 cement mortar bedding and joint grouted flush in cement mortar mixed with 5% cement all as specied and directed.

All a per above but except tiles (old serviceable dismantled tiles obtained from Srl item No 1 shall be reused after necessary cleaning of mortar)

M & L for 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base finished fair & even to receive floor finished complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debries out of defence land complete all as specified and directed.

S&F for 5.5 mm thick sheet glass ordinary quality in square or rectangular in size n.exc .5 sqm each in aluminium door or window shutter including taking out old damaged glass pane complete all as specified and directed

Preparation of old painted wooden surfacs of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for two coat synthetic enamel paint over a coat pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete all as specified and directed

Preparation of old painted steel surfacs of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for two coat synthetic enamel paint over a coat red oxide primer on new steel surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete all as specified and directed

S&F 15 mm bore stop valves/ angle valves fancy type chromium plated screwed dwon high pressure with cruth or butterfly handle for 15 mm dia iron pipe fixed in repairs complete all as directed.

S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms.) complete all as spd.

Grating doom CP 100 mm dia ( minimum weight 25 gms) fixed in repairs complete all as specified and directed.

Grating doom CP 125 mm dia of with waste pipe hole (minimum weight 40 gms) fixed in repairs complete all as specified and directed.

S&F PVC (SWR)pipes 110mm dia in any length with rubber ring joint fixed to wall/ laid in floor complete all as specified and directed.

S&F PVC (SWR)bends 110mm dia, in any radius, complete all as specified and directed.

S&F glass corner/rectangular shelf 12" with brass brackets of heavy duty and thickness of glass min 6mm and railing 60cm long fixed all as directed

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc complete all as specified and directed .

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified & directed.

Demolition of cement concrete in ground floor & paving n.exc 15cm above ground level complete all as specified as directed

Dismantling of brick tiles or terracing tiles single layer on roofs all as specified and directed

Dismantling of CI/PVC pipe of 75/100mm dia fixed with cement joint.

S&F in repair 150mm floor door stopper of aluminimum alloy body and tongue anodized with hard drawn steel springcomplete all as specified and directed.

M&L for ceramic glazed coloured tiles area of each tiles exceeding 0.16 sqm but not exceeding 0.36 sqm (sample and pattern shall be approved by Engts-in-charge) incl 10mm thick rendering in cm(1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/dado complete all as specified and directed by Engr-in-charge

M & L for coloured non skid/matt finish ceramic tiles, 7 to 8 mm thick, (square/ rectangular), area of each tile exceeding g 0.11 sqm but not exceeding 0.18 sqm sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed by Engr-in-Charge.

M&L 5mm thick cement plastering on ceiling in CM 1:3 and applying Two coats of Oil Bound Distemperon newly plastered surfaces including taking down complete all as spd

M&L 15mm thick cement plastering on fair faces in cm 1:4 on brick or concrete surfaces fair finished the surfaces even and fair without using extra cement with and including taking down Complete all as spc upto height 7.5 mtr

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces other than fair surface, finished the surfaces even and smooth without using extra cement and applying two coats of oil bound distemper over a coat of primer on plastered surfaces including taking down complete all as spd

M&L for Virified tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured ,light shade cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-charge

M&L preparation of new plaster surface applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. all as spd upto height 7.5 mtr.

M&L for complete removal of existing treatment from walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc and applying two coat of oil bound distemper on ceiling complete all as specified and direceted.

Sheet glass 3mm thick ordinary quality and glazing with oil putty in sqaures in n.exc 0.5 sqm in each panes including taking out of old broken glass ( any thickness,size,quality or description ) from wooden or steel frames with putty or fixed with beads, punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed

S&F incl taking up and down GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed

S&F incl taking up and down GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed

S&F in repair 15mm bib cock,cast copper alloy chromium plated fancy type15mm bore with capstan head,screwed down,screwed from iron pipe or for brass ferrule, complete all as specified and as directed.

S&F in repairs vitreous china wash down water closed (pedeatal pattern) white pedestal pan and trap, including connection to drain ( or out going pipe ) and to flushing pipe, antisyphonage pipe, with plastic water closet sheet cover white , closed pattern with flat bottom and mild steel chromium plated or aluminised hinging deviec etc complete all as specified.

M&L for PCC 1:3:6 Type C-1 Cement concrete in foundations, filling and mass concrete all as specified and directed by EIC.

S&F 30mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides with and including 0.9mm Decorative laminate type 1 of surface finish, colour and pattern approved by Engrs-in-charge fixed with approved adhesive as per manufatureer instruction Complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 35*65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

Ditto all as item no. 60 here-in above single rebated having size of chockhats is 50*75mm

Ditto all as item no. 60 here-in above but double rebated having size of chockhats is 65x125mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain/decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&f stainless Steel Telescopic Drawer Channel/Runner (Be Blue) 18-20 Inch with 3 Ball Bearing Weight Capacity Upto 35 kg Pack of 1 Pair complete all as specified and directed make;(Hettich,Ebco,prime)

S&F stainless Steel fancy type round D Drawer Cabinet Handles, 4 Inch including all fitting complete all as directed by Engr-in-Charge make;(Hettich,Ebco,prime)

S & F Concealed Cabinet Hinges Door Hydraulic Cabinet Auto Cup Hinge fixing in kitchen shutters including all fitting complete all as specified and directed. make;(Hettich,Ebco,prime)

S&F White Virgin Magnet Catchers For Cupboard,50cmx25cm including all fitting complete all as specified and directed.

M&L for Preparation of plastered or un-plastered surface or removal of existing treatment by scrappinf of walls, pillars, cornices etc shall be done After preparation of surface, approval shall be obtained from Engineer-in-Charge before applying 1mm thick wall putty with primer and further treatment / coat including applying two coat of interior grade emulsion paint complete all as specified and direceted.

S & F Counter top Vitreous China Wash hand basin, white oval type 550x400 mm including brackets(including 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe and 600mm long PVC connector 15mm) all as specified & directed by Engineer-in-charge.

Supply and fixing one piece EWC (cascade type) water closet (having size 690*360*740 as approved by Engrs-in-charge) with inbuilt cistern white in colour incl seat cover, health faucet fixing complete as per manufctureer direction make: CERA or equivelent as approved by Engrs-In-Charge.

S & F Beam pillar WHB taps silver with chromium finishes fancy type any height, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed. (Make: Kohler or equvilent)

M&L for Virified tiles 14-15mm thick (square/ rectangular) gloss finish, area of each tiles exceeding 1.00 sqm but not exceeding 2.00 sqm, in floors/kitchen slab etc. set and jointed in neat cement slurry and pointed in white or coloured ,light shade cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-charge

M&L for coloured vitrified tiles heavy duty 400 x 400 mm x 8-10mm thick, colour and design as approved, set and jointed using neat cement slurry and pointed in coloured cement or white cement mixed with pigment to match the surface, laid over and including 15 mm thick screed bed or bedding layer in CM (1:6), complete all as specified and directed by Engr-in-charge

S&F in repair steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mmX25mm double rebated comprises of glazed & gauged skelton shutter (required no of gauged shutter and glazed shutters) including guard bar ERW sec 50mmX20mm and 1mm thick with two openable leaf consisting two nos sash bar of T-section 20mmX3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 (Four Nos of each window) including following fitting welded to frame shutter:- Ref Drg No CEAF/STD-184-2012 Sheets 1/3, 2/3 & 3/3 (i) Hold fast,150mm long of MS flat iron 12mmX3mm made to shape-04 Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (ISI Marked) (iii) MS Tower bolt 150mm long-02 Nos per leaf (ISI Marked) (iv) Z sec 20mmX25mm,100mm long stopper -01 Nos per leaf (v) Cleat 55mm long of hollow square 15mmX12mm-02Nos per leaf (vi) Fabrication & fixing arrangements as Drg No CEAF/STD-184-2012 Sheets 1/3, 2/3 & 3/3 (vii) M S guard bar 8mm square bars @75mm C/C fixed horizontlly. Note : Glass,wiremess and painting shall be measured and paid separately.

M&L Tensile Canopy cantilever structure made of sioen ferrari fabric Weight 900 gsm/sqm, width -320mm,having tensile strength -280/280DAM/5cm,Adhesion-10/10 DAM/5cm,treated with Secfesh treatment,Flame retardancy M-2/nfp 92-507 to ISO9001, ISO14001, Light transmission 13.50 % complete all as specified & directed by Egrs-In-Charges

E/M PORTION

Taking down carefully copper / aluminum point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, lamp holders, bracket, light fittings, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls, floors etc as per existing complete all as specified and directed.

Material and labour, point wiring concealed type with PVC insulated (unsheathed) cable 1.5 Sqmm (Nominal area) multy stranded FRLS Copper conductor 1100 volts grade and continous earth wire PVC insulated 1.5 sqmm copper conductor to comman earth in and including new PVC conduit chasing and with new sunken boxes for piano switches/sockets & sheet and frame for piano/Modular switches/sockets/Regulator (incl cutting chases & making good the disturbed surface ) complete all as specified and directed by Engineer-in-charge for the following (Note :- Sunken boxes, modular frame, plate etc as required at site are included in the quoted rate)

(a) For one light/fan/bell point controlled by one 6 Amp one way switch complete all as specified and directed.

(b) All as per item No. 2 hereinbefore but wiring for one 3 pin 6 Ampere socket outlet point on the same board, controlled by other switch complete all as specified and directed.

(c) All as per item No. 2 hereinbefore but wiring for one 3 pin socket outlet 6 amps independent board complete all as specified and directed.

All as per item No 2 hereinbefore but with 2.5 Sqmm size cable multy stranded FRLS copper wire unsheathed for one 3 pin socket outlet 16 Amp on independent board including continous copper solid conductor connecting to comman earth dolly completed all as specified and directed ny Engineer-in-charge for the following - (Note :- Sunken boxes, modular frame, plate etc as required at site are included in the quoted rate)

S & F of switch piano modular type single pole one-way 6 Ampere complete all as specified and directed.

S & F of switch piano modular type single pole one-way 16 Ampere complete all as specified and directed.

S & F of 6 Ampere socket outlet modular type, multi purpose suitable for 2 and 3 pins (Total 5 Pins) complete all as specified and directed.

S & F of socket outlet two-in-one, 3 pin each suitable for 6 and 16 Ampere modular type with shuttered complete all as specified and directed.

S & F stepped type electronic fan regulator modular type on the existing phenolic laminated sheet etc. as reqd heavy duty 230 volts complete all as specified and dircted.

Supply and fixing LED tube light fitting 1x20 watts Aluminum housing and milky diffuser with PVC insulated flexible copper cable from ceiling rose to tube light fitting complete all as per specified and directed.

S&F of lamp holder PVC / polycorbonate type insulated body with back plate suitable for batten fitting / angle fitting complete all as specified and directed.

Supply and fixing SMD LED panel recess/surface suspended mounting 36 watt 2' x 2' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 Volts, 50HZ complete all as specified and directed.

S & F of ceiling rose, surface bakelite, 65 X 50 mm, 3 terminals complete all as specified and directed.

S & F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 8 ways including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and as directed including necessary brick work and plaster to match with the existing surface complete all as specified.

S & F MCB DP, 240 Volts, AC, B curve, 10 KA, 40 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed

S & F MCB single pole, 240 Volts, AC, B curve, 10 KA, 6 to 32 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed

Supply and fix sheet metal encloser single pole and meutral , with two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed

M&L for sub main wiring two single core 4 Sqmm(nominal area) multi-strand copper conductor FRLS PVC insulated and unseathed cable drawn in and including non metalic PVC regid conduit medium grade of suitable size with all standerd fittings, concealed including one run of continous PVC insulated stranded copper conductor FRLS cable 4 sqmm for earth continuty, including taking out and removal of old sub main wiring, complete all as specified and directed. Note:- Rate quoted shall be deemed to include cutting chases for concealed conduit and making good incement mortar(1:4) or PCC (1:2:4)

M&L for sub main wiring two single core 6 Sqmm(nominal area) multi-strand copper conductor FRLS PVC insulated and unseathed cable drawn in and including non metalic PVC regid conduit medium grade of suitable size with all standerd fittings, concealed including one run of continous PVC insulated stranded copper conductor FRLS cable 6 sqmm for earth continuty, including taking out and removal of old sub main wiring, complete all as specified and directed. Note:- Rate quoted shall be deemed to include cutting chases for concealed conduit and making good incement mortar(1:4) or PCC (1:2:4)

Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep for laying of cables and foundation of poles etc. and getting out complete all as spceified and directed.

Returning, filling in trenches (soil) including spreading leveling and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Supply & laying in repair GI pipes 25 mm dia, medium grade with all necessary GI fittings laid in trenches or on walls including taking out old pipe complete all as specified and as directed by EIC.

Supply & laying in repair GI pipes 20 mm dia, medium grade with all necessary GI fittings laid in trenches or on walls including taking out old pipe complete all as specified and as directed by EIC.

Supply and Fixed Gun metal globe /gate/stop valve (ISI marked) with iron wheel head screwed both ends for iron pipe of 25 mm dia fixed in repair all as specified and directed by EIC

Supply and Fixed Gun metal globe /gate/stop valve (ISI marked) with iron wheel head screwed both ends for iron pipe of 20 mm dia fixed in repair all as specified and directed by EIC

Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit.

S S CONSTRUCTION COMPANY (BID ID -3199871)

M/S SIMRAN WALIA ENTERPRISES (BID ID -3193674)

B S TRADERS (BID ID -3193937)

M/s AKG Engineers & Contractors (BID ID -3194229)

Northern cable fault locatoers (BID ID -3193877)

om parkash and sons (BID ID -3193912)

kapoor and co (BID ID -3192948)