Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.8 LAccepted-AOC FLAT NO 404 BLOCK II NIRMAL HEIGHT SECTOR 12A OLD MATHURA ROAD AGRA 282007 UP | AGRA | AGRA | UTTAR PRADESH | 282007 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹30.1 L+₹65,870 (2.23%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹30.4 L+₹89,230 (3.03%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹32.9 L+₹3.4 L (11.6%)Rejected-Finance 205L MODEL TOWN LUDHIANA | LUDHIANA | LUDHIANA | PUNJAB | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹33.0 L+₹3.5 L (11.9%)Rejected-Finance 34 1 12 2F SAINIK VIHAR DEORI ROAD AGRA UP 282007 | AGRA | UTTAR PRADESH | 282007 | L5 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | M/S OM Enterprises L5 | SahaDevSingh Constructions L3 | M/s S. K. Construction Co. L4 | Attar Singh and Sons L8 | M/S MRITUNJAI SHARMA L10 | M/S RADHEY GOVIND ENTERPRISES L7 | saroj constructions L1 | M/S APOORVA CONSTRUCTION L2 | M/S KAMAKHYA CONTRACTORS L6 | TRIVENI ASSOCIATES L9 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed by Engr-in-Charge | 100 | Each | 200 ₹20,000 | 80 ₹8,000 Lowest | 120 ₹12,000 | 400 ₹40,000 | 250 ₹25,000 | 100 ₹10,000 | 100 ₹10,000 | 100 ₹10,000 | 200 ₹20,000 | 100 ₹10,000 |
| 2.00 | Taking down chowkats or frame with shutter (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge | 40 | Each | 200 ₹8,000 | 90 ₹3,600 | 100 ₹4,000 | 290 ₹11,600 | 240 ₹9,600 | 150 ₹6,000 | 50 ₹2,000 Lowest | 100 ₹4,000 | 200 ₹8,000 | 100 ₹4,000 |
| 3.00 | Taking down chowkats or frame exc 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed by Engr-in-Charge | 30 | Each | 200 ₹6,000 | 90 ₹2,700 Lowest | 120 ₹3,600 | 235 ₹7,050 | 270 ₹8,100 | 100 ₹3,000 | 100 ₹3,000 | 100 ₹3,000 | 200 ₹6,000 | 100 ₹3,000 |
| 4.00 | Taking down shutter of any description exc 1sqm but not exc 2 Sqm each and removing unserviceable materials from site of work complete all as specified and directed by Engr-in-Charge | 30 | Each | 200 ₹6,000 | 80 ₹2,400 | 60 ₹1,800 | 95 ₹2,850 | 290 ₹8,700 | 50 ₹1,500 Lowest | 50 ₹1,500 Lowest | 100 ₹3,000 | 200 ₹6,000 | 250 ₹7,500 |
| 5.00 | Taking down shutter of any description n exc 1 Sqm each and removing unserviceable materials from site of work complete all as specified and directed by Engr-in-Charge | 30 | Each | 200 ₹6,000 | 90 ₹2,700 | 50 ₹1,500 Lowest | 50 ₹1,500 Lowest | 260 ₹7,800 | 50 ₹1,500 Lowest | 50 ₹1,500 Lowest | 50 ₹1,500 Lowest | 200 ₹6,000 | 250 ₹7,500 |
| 6.00 | M&L for taking down and refixidng in same opening wood shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing with same hardware ect. | 200 | Each Leaf | 200 ₹40,000 | 150 ₹30,000 | 150 ₹30,000 | 390 ₹78,000 | 250 ₹50,000 | 50 ₹10,000 Lowest | 150 ₹30,000 | 200 ₹40,000 | 200 ₹40,000 | 500 ₹1,00,000 |
| 7.00 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45X85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length and hinges complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetccomplete all as specified and directed by Engr-in-Charge | 192.5 | RM | 600 ₹1,15,500 | 650 ₹1,25,125 | 800 ₹1,54,000 | 840 ₹1,61,700 | 4,800 ₹9,24,000 | 650 ₹1,25,125 | 630 ₹1,21,275 | 2,000 ₹3,85,000 | 400 ₹77,000 Lowest | 1,200 ₹2,31,000 |
| 8.00 | M&L for Factory made WPC (Wood Polymer Composite) Double Rebated frame of solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length and hinges complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made etc complete all as specified and directed by Engr-in-Charge | 75 | RM | 600 ₹45,000 | 650 ₹48,750 | 950 ₹71,250 | 1,130 ₹84,750 | 4,000 ₹3,00,000 | 900 ₹67,500 | 1,100 ₹82,500 | 800 ₹60,000 | 400 ₹30,000 Lowest | 1,500 ₹1,12,500 |
| 9.00 | M&L for factory made Pressed steel frames 105 x 60 x 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike plate,etc complete including PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregate) as in filling hollow portion of frame complete all as specified and directed by Engr-in-Charge. | 50 | RM | 350 ₹17,500 | 650 ₹32,500 | 650 ₹32,500 | 345 ₹17,250 Lowest | 3,200 ₹1,60,000 | 500 ₹25,000 | 700 ₹35,000 | 800 ₹40,000 | 450 ₹22,500 | 350 ₹17,500 |
| 10.00 | S&F for Mild steel framed work as in doors chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete all as specified and directed., drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete, quality conforming grade Fe- 290 or E- 165 complete all as specified and directed by Engr-in-Charge | 900 | Kg | 180 ₹1,62,000 | 135 ₹1,21,500 | 120 ₹1,08,000 | 130 ₹1,17,000 | 165 ₹1,48,500 | 120 ₹1,08,000 | 110 ₹99,000 Lowest | 110 ₹99,000 Lowest | 110 ₹99,000 Lowest | 350 ₹3,15,000 |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
12 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Dinoop Kumar
GE (W) Agra
REPAIR / MAINT TO ALL JOINERY WORK UNDER AGE B/R- II OF GE (W ) AGRA.
2025_MES_722266_1
8012/1125/E8
Open Tender
Civil Works
Item Rate
180 days
GE (West) Agra
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (West) Agra
₹60,000
16 Oct 2025
24 Jul 2025
19 Aug 2025
24 Jul 2025
12 Aug 2025
6 Aug 2025
Amount
Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed by Engr-in-Charge
Taking down chowkats or frame with shutter (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge
Taking down chowkats or frame exc 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed by Engr-in-Charge
Taking down shutter of any description exc 1sqm but not exc 2 Sqm each and removing unserviceable materials from site of work complete all as specified and directed by Engr-in-Charge
Taking down shutter of any description n exc 1 Sqm each and removing unserviceable materials from site of work complete all as specified and directed by Engr-in-Charge
M&L for taking down and refixidng in same opening wood shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing with same hardware ect.
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45X85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length and hinges complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetccomplete all as specified and directed by Engr-in-Charge
M&L for Factory made WPC (Wood Polymer Composite) Double Rebated frame of solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length and hinges complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made etc complete all as specified and directed by Engr-in-Charge
M&L for factory made Pressed steel frames 105 x 60 x 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike plate,etc complete including PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregate) as in filling hollow portion of frame complete all as specified and directed by Engr-in-Charge.
S&F for Mild steel framed work as in doors chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete all as specified and directed., drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete, quality conforming grade Fe- 290 or E- 165 complete all as specified and directed by Engr-in-Charge
S & F Mild steel work in chimney bars, (straight or camber); bearing bars; toungues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames L or T section section suports for shelves etc and similar work conoirming to Fe-290 Gde-165 complete all as specified and directed by Engr-in-Charge
Taking down steel/iron door of any size including cleaning,adjusting ,welding steel sheet for repair ,wiremsh and refixing including all necessary items like hinges .sliding door bolt etc complete all as specified and directed by Engr-in-Charge
S&F Factory made flush shutter 30 mm thick solid core construction with block board core and plywood face panels commercial type complete all as specified and directed by Engr-in-Charge
S&F for factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including fixing with 100mm long stainless steel butt hinges -04Nos with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engr-in-Charge
S & F 30 mm thick, factory made , llnd class hard wood (Sal) glazed and skeleton shutter open rebated and prepared to receive glass, gauze, etc. (with out sash bars), edges of framing plain, charmfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part l, section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed by Engr-in-Charge
S&F of factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube , supplying & fixing in opening as per specification and drawing complete all as specified and directed by Engr-in-Charge
S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.
Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II).
S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge
S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge
S&F Aluminium alloy, anodised, 250 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge
S&F 100 mm long stainless steel hinges type B-12 and fixed with screw/ welding complete all as specified and directed by Engr-in-Charge
S&F 150 mm long aluminium anodized handle cast type complete all as specified and directed by Engr-in-Charge
M&L 100 mm long aluminium anodized handle cast type complete all as specified and directed by Engr-in-Charge.
S&F Floor door stopper 150 mm long of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed by Engr-in-Charge.
S & F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed
S & F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed by Engr-in-Charge
S&F in repairs stainless steel drapery rods, 25mm internal diameter including decorating type domes including fixing arrangement with drilling holes in walls supported with brackets etc complete all as specified and directed by Engr-in-Charge
S&F in repairs 3 mm thick plain/Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed by Engr-in-Charge
Two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer including preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth complete all as specified and directed by Engr-in-Charge
M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of hold fast etc including desterb surfase of existing pogition complete all as specified and directed by Engr-in-Charge
S&F in repair Double action Floor spring hydraulically regulated made up of minimum 1.25 mm thick Al alloy sheet foundation box main of brass with stainless steel cover, governing pivot made of brass other parts are made of MS heavy duty etc complete all as specified and directed by Engr-in-Charge
S&F 4 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge
S&F in repair 4 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge
S&F in repair 12mm Toughned glass as in hinged doors, partitions automatic doors and similar work includingcutting to shape, drilling holes required complete all as specified and directed by Engr-in-Charge.
S & F in repairs rubber gasket for aluminium door and windowcomplete all as specified and directed by Engr-in-Charge.
S & F in repairs aluminium beading of suitable size for fixing sheet glass in aluminium door and window complete all as specified and directed by Engr-in-Charge
S&F powder coated anodized aluminium door & frame with reqd size of aluminium sections including 5 mm thick tinted glass coloured in half portion and in other half portion 4 mm thick ACP sheet or glass 5mm of any colour complete and fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No Hydraulic door closer for each shutter complete all as specified and directed with following specifications:- (a) Aluminium door frame = 101.50x44.45mm (b) Aluminium style/top & middle rails of shutter = 83.5x44.45mm (c) Aluminium bottom rail of shutter = 114.50x44.45mm (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed by Engr-in-Charge
S & F powder coated Anodised aluminium three track sliding window made of extruded profiles with reqd size of aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and plain glass on two shutters and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples on one shutters with two nylon roller on each shutters including star lock handle complete all as specified and directed by Engineer-in-charge
S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) weighing 0.55 Kg/M or frame size as per ground requirement complete all as specified and directed by Engr-in-Charge
S & F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all as specified and directed by Engineer-in-charge.
S&F powder coated of any colour (thickness or powder coating not less than 50 micron)anodised aluminium window and ventilator shutters including frame of required , side hung type without sash bars, aluminium sections weighing not less then 0.55 Kg/M including necessary joining cleats,glass(min thickness 4mm) ,wiremesh, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 No.) suitable handle (1 no.) complete all as specified and directed by Engr-in-Charge
S&F aluminium anodised grill (DG 104) 10mm x 5 mm thick on Deco grill or equivalent fixed with 'F' section approved make complete all as specified and directed by Engr-in-Charge
S & F in repair cast iron Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
Taking down and refixing of aluminium shutter in the same position after repairing and making it smooth functional including replacement of unserviceable top pivot and adjustment of floor door stopper (size of shutter n.exc 2.50 sqm each) replacing including provision of unservicable hinge, handle, lock, aluminium plate,floor spring machine & floor door stopper,rubber beading ,aluminium beading etc complete all as specified and directed by Engr-in-Charge
S & F in repair Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) decorative Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws and all required frame as per site requirement.Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet /Kitchen/Balcony Doors and Cabinets.complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.
M&L for 15 mm thick rendering in CM 1:6 on other than fair faces of brick or concrete surface with finished fair and even complete all as specified and directed by Engr-in-Charge
Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed by Engr-in-Charge
Demolition of brick work built in cement or cement lime mortar incl all quoins, arches, pillars etc, complete all as specified and directed by Engr-in-Charge
M&L for brick work with sub class ‘B’ brick, straight curved on plan exc 6m mean radius built in cm (1:4) using old size bricks complete all as specified and directed by Engr-in-Charge
Supply & fix hasp and staple of size 75 mm long, safety type of aluminum anodized complete all as specified and directed by Engr-in-Charge
Material & labour for pre-laminated particle board 19mm thick, exterior grade, pre-laminated one side with decorative choice laminations and other side balancing white laminations, fixed with nails/screws to timber frame work as in cupboard/shelves fixed in repair complete all as specified and directed by Engr-in-Charge
Supply & fixing in repair of 40mm dia Cup Board knobs fixed with nut, screws Each and washers of mild steel, brass polished complete all as specified and directed by Engr-in-Charge
S & F in repair 40 mm width flap Continuous (piano) hinges,mild steel, bright finish or electrogalvanised complete all as specified and directed by Engr-in-Charge
Dismantling of old wall/ ceiling board of any thickness incl cover fillets etccomplete all as specified and directed by Engr-in-Charge
S&F in repair GI powder coated snap grid frame work for false ceiling all as specified of grid 605 x 605 including GI hangers of suitable dia and fixed to purlin/rafters complete all as specified and directed by Engr-in-Charge
M&L for 4 mm thick non asbestos fibre cement building designer boards fixed in ceiling or laid/inserted to timber/GI/aluminun frame.
M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface of stress over 10 cm width or girth, not otherwise described complete all as specified and directed.
S & F factory made steel windows with side hung shutters including box type hinges with Z section steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed
S & F factory made steel windows with side hung shutters including box type hinges with Z section steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.
Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engr-in-Charge
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed by Engr-in-Charge
S&F 3 mm thick plain/Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each panecomplete all as specified and directed by Engr-in-Charge
S&F in repair 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge
S&F in repair 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge
S&F in repair Aluminium alloy, anodised, 250 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge
S&F in repair 100 mm long stainless steel hinges type B-12 and fixed with screw/ welding complete all as specified and directed by Engr-in-Charge
S&F in repair 150 mm long aluminium anodized handle cast type complete all as specified and directed by Engr-in-Charge
M&L in repair 100 mm long aluminium anodized handle cast type complete all as specified and directed by Engr-in-Charge
M/S APOORVA CONSTRUCTION (BID ID -3389265)
SahaDevSingh Constructions (BID ID -3388817)
M/s S. K. Construction Co. (BID ID -3390662)
M/S OM Enterprises (BID ID -3391247)
M/S KAMAKHYA CONTRACTORS (BID ID -3390306)
M/S RADHEY GOVIND ENTERPRISES (BID ID -3386261)
Attar Singh and Sons (BID ID -3390927)
TRIVENI ASSOCIATES (BID ID -3390834)
M/S MRITUNJAI SHARMA (BID ID -3387202)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .