Recall RECONSTRUCTION OF HALL IN COMMUNITY CENTER OF HUDA SECTOR IN MC HANSI C...

Amount

Supply of 20 watt led down concealed light(MAKE-WIPRO,SYSKA,PHILIPS,ORIENT)

Supply and fixing of 40 watt tube light(MAKE-WIPRO,SYSKA,PHILIPS,ORIENT)

Supply and fixing of 16 Sqmm 4 core Aluminium Armoured cable

Providing and fixing MS box for concealed light

Supply and fixing of 2`x2` Celling LED Panel Light

1 `Supply, Installation, Testing and commissioning of Micro processor based 2 wire fault tolerant, networkable type fire alarm` `/ detection control panel ( having nos. of loops to suit minimum 20% extra over the nos. of fire detector), The panel shall be able to give location of all fire / fault conditions of addressable units via the address codes.` Further, the panel must be able to automatically switch `ON/OFF respective control module when ever any alarm is triggered. The panel shall have rectifier, loop cards, minimum 160 character L C D unit/ 5.7??TFT to indicate Fire / Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects. The Panel Shall be sheet ` Steel powder coated, sealed to IP30. The Panel shall have 20 Zones with individual LED Indicators, expandable to 80LED Indicators. The Panel shall have 3 Serial Ports. `The panel shall have a built in power supply and battery charger along with maintenance free 24 AH,2 x 12 volt` `SMF lead acid batteries of Exide / SF / Panasonic make capable of running for a minimum of 24 hours with battery charger complete as required and conforming to ` `BS5839 standards. Duly Approved by EN 54/UL/VDS/ with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` a Main Fire Alarm Control Panel 6 LOOP (To Be placed on G.F. Floor)

1 `Supply, Installation, Testing and commissioning of Micro processor based 2 wire fault tolerant, networkable type fire alarm` `/ detection control panel ( having nos. of loops to suit minimum 20% extra over the nos. of fire detector), The panel shall be able to give location of all fire / fault conditions of addressable units via the address codes.` Further, the panel must be able to automatically switch `ON/OFF respective control module when ever any alarm is triggered. The panel shall have rectifier, loop cards, minimum 160 character L C D unit/ 5.7??TFT to indicate Fire / Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects. The Panel Shall be sheet ` Steel powder coated, sealed to IP30. The Panel shall have 20 Zones with individual LED Indicators, expandable to 80LED Indicators. The Panel shall have 3 Serial Ports. `The panel shall have a built in power supply and battery charger along with maintenance free 24 AH,2 x 12 volt` `SMF lead acid batteries of Exide / SF / Panasonic make capable of running for a minimum of 24 hours with battery charger complete as required and conforming to ` `BS5839 standards. Duly Approved by EN 54/UL/VDS/ with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` b. Fire Alarm Panel 4 Loop at each floor

2 `Supply, Installation, Testing and commissioning of intelligent Analog Addressable type smoke detector that combine photo Electronic and fixed temp thermal with inbuilt isolator or isolator base complete with LED Hard ` `Addressable saving rotary decade Address switches with Mounting Base Complete as required conforming to BS 5839 standards and duly`

3 `Supply, Installation, Testing and commissioning of intelligent Analog Addressable type Manual Call Point having Surface or flush mounting option fully compliant to EN 54 having Rotary Decade switches for addressing with back box for mounting as required conforming to ` BS5839 standards and duly approved .. Charge.

4 `Supply, Installation, Testing and commissioning of Addressable Loop powered sounder with strobe / flasher complete with mounting base as required conforming to ` BS5839 standards and duly approved .. Charge.

5 `Supply, Installation, Testing and commissioning of Glow Type EXIT/Stair` /Emergency Exit Sign Board as finalized by Engineer In Charge, photo luminescent of size `300 mm x 250 mm x 1.5 mm rigid sheet signage containing Zink Sulphate as bare chemical class ` `– 1 material PSPA fixed on 3 mm acrylic sheet on both side showing` marking (running man, Arrow and Exit) and `hanged with the ceiling with chain and fastenerwith . material required to complete the work upto the entire satisfaction of Engineer In Charge.`

6 `Supply, Installation, Testing and commissioning of Analog Addressable type Active Repeater fire alarm panel with Backlit LCD Display, having controls for reset, mute, Accept, Silence alarms and self test conforming to BS5839 standards and duly approved by ` EN54/UN54/VDS . Charge.

7 `Supply, Installation, Testing and commissioning of Addressable Monitor Module for monitoring of a line with EOL resistor/ Potential free contact/ voltage monitoring shall be compliant to EN54/UL/VDS. (In case of 2 monitoring features in one module (points) both point shall be consided as single unit for payment) .` of Engineer In Charge.

Supply and Installation of FRP Sculpture of “I Love Hisar” as per attached details and sizes (Length: 7.50m, Width/thickness of letters: 0.30-0.45m and height: 1.50m) with frame and inbuilt lighting / Illumination work at site, including all necessary fixtures, equipment, transportation, loading- unloading, etc. complete as per Engineer-in-charge. Note: Civil and External Electrical work not in the scope.

Supply and Installation of FRP Panchatatva Sculpture in five colours as per attached detail, Colour and sizes (Length: 1.12m, Width: 1.12m height: 2.40m) with frame at site, including all necessary fixtures, equipment, transportation, loading- unloading, GST etc. complete as per Engineer-in-charge. Note: Civil and Electrical work not in the scope

10 `Supply and erection of Duct type smoke detector with . material required to complete the work upto the entire satisfaction of Engineer In Charge.`

11 `Supply, installation, testing and commissioning of 2 core multistrand 1.5 sq mm annealed copper conductor speaker cable in existing pipe/ channel I/C connection etc. including the cost of all petty material required to complete the job upto entire specifications of Engineer- in – charge and with the 3 years free comprehensive warranty period.`.

12 Supply, Installation. Testing and `Commissioning of c-class M.S. pipes conforming to IS:1239, including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges, welded joints etc. as required, making good complete with wrapping and coating` `, including the cost of digging of trench and back filling the same and cost of the petty material required to complete the work with 3 ` `Year free comprehensive warranty period, upto the entire satisfaction of` Engineer In Charge.(Under ground) Make : JINDAL/TATA a) 150 mm dia

12 Supply, Installation. Testing and `Commissioning of c-class M.S. pipes conforming to IS:1239, including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges, welded joints etc. as required, making good complete with wrapping and coating` `, including the cost of digging of trench and back filling the same and cost of the petty material required to complete the work with 3 ` `Year free comprehensive warranty period, upto the entire satisfaction of` Engineer In Charge.(Under ground) Make : JINDAL/TATA b)100 mm dia

12 Supply, Installation. Testing and `Commissioning of c-class M.S. pipes conforming to IS:1239, including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges, welded joints etc. as required, making good complete with wrapping and coating` `, including the cost of digging of trench and back filling the same and cost of the petty material required to complete the work with 3 ` `Year free comprehensive warranty period, upto the entire satisfaction of` Engineer In Charge.(Under ground) Make : JINDAL/TATA c)80 mm dia

13 `Supply. Installation. Testing and Commissioning of P.N.1.6 Butterfly Valve, as per IS:13095.complete with flanges, gasket, nut bolts for isolation with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` Make : Kartar a 80 mm dia

13 `Supply. Installation. Testing and Commissioning of P.N.1.6 Butterfly Valve, as per IS:13095.complete with flanges, gasket, nut bolts for isolation with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` Make : Kartar b 100 mm dia

13 `Supply. Installation. Testing and Commissioning of P.N.1.6 Butterfly Valve, as per IS:13095.complete with flanges, gasket, nut bolts for isolation with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` Make : Kartar a 80 mm dia b 100 mm dia c 150mm dia

14 `Supply. Installation. Testing and Commissioning of 150mm dia Sluice Valve as per IS-14846. complete with flanges, gasket, nut bolts .` of Engineer In Charge. Make : KARTAR

15 `Supply, installation, testing and commissioning of Fire Hydrant Valve (Landing Valve), bearing to IS:5290 mark. ` S.S., 63mm. oblique instantaneous single outlet, 75mm. `N.B. flangod inlet, spindle, complete with PVC blank cap., G.l. chain etc. .` Charge. Make : ULTRA FIRE

16 `Supply, installation, testing and commissioning of Branch Pipe, S.S.. short type, with 63mm. male instantaneous inlet, male threaded outlet, fitted with 16mm bore nozzle, as per IS.318 ` LTB2/1S-903 with Make : ULTRA FIRE

17 `Supply, installation, testing and commissioning of Fire Hose, RRL hose jacketed with circular woven synthetic fibre, conforming to IS: 638:88. 63mm.dia.x 15Mtr long with SS heavy duty. 63mm. 2 pair of male and female instantaneous couplings, having IS: 903 mark with duly ` `S.S. wire wounded The hose shall be rolled and hug to suitable M. S. support in the Fire Station, with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` Make : ULTRA FIRE

18 `Supply, Installation. Testing and Commissioning of weather proof standard FireHose Cabinet box, with 5mm thick Single Glass Door, 18 SWG SS 304 sheet fabricated, including Lock and Key with PO Red Paint, rubber bidding, complete in all respect for external, Size ` 900x750x250. . Charge. Make : ULTRA FIRE

19 `Supply, Installation, Testing and Commissioning of 4 way Fire brigade inlet with 63 mm dia instantaneous inlet as per IS:904 complete with all necessary fittings, ` `of petty material required to complete the work upto the entire satisfaction of Engineer In` Charge. Make : ULTRA FIRE

20 `Supply, Installation. Testing and Commissioning of 150 mm dia Dual Plate Non Return Valve 150 mm dia, as per ` IS-14846,comp!ete with flanges, gasket, nut bolts . Charge. MAKE : KARTAR

21 `Supply, installation, testing and commissioning of Manual Swing Type First aid Fire Hose Reel conforming to IS: 444 complete with heavy duty reel, 19mm dia.x ` `30Mtr. long, 2-ply polyester yarn braided /rubber braided pressure hose with heavy duty nylon on/off jet/spray nozzle, 25mm isolating valve .` Charge. Make: ULTRA FIRE

22 `Supply. Installation. Testing and Commissioning of Pressure Gauge with gauge cock .` of Engineer In Charge. Make: FIEBIG/H.GURU

23 Supply. Installation, Testing and `Commissioning of Air cushion Tank (200mm dia x 1000mm height) fabricated from MS` Sheet with dish ends, including fittings/accessories, with 2 coats of Primer and P.O.Red Enamel Paint (Locally `Fabricated) with . material required to complete the work upto the entire` satisfaction of Engineer In Charge.

24 `Supply, Installation, Testing and Commissioning of 25 mm dia Air Relese Valve with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` Make :KARTAR

25 `Supply. Installation. Testing and Commissioning of Electric driven Terrace pump capacity 900 lpm.10 HP @ ` `30 MWC Head complete with base plate, coupling guard, foundation bolts .` Charge. Make:KIRLOSKAR/CG/ABB

26 `Supply. Installation, Testing and Commissioning of 25 mm dia Gate Valve 25 mm dia with . material required to complete the work upto the` entire satisfaction of Engineer In Charge. Make :KARTAR

27 `Supply and Fixing of Carbon Standard Fire Man Axe with .` material required to complete the work upto the entire satisfaction of Engineer In Charge.

28 `Supply and fixing of 6kg ABC type fire extinguisher as per IS:15683(6 kg.) .` of Engineer In Charge. Make: ULTRA FIRE

29 `Supply and fixing of 4.5kg C02 gas type fire extinguishe as per IS: 15683(4.5 kg.) .` of Engineer In Charge. Make : ULTRA FIRE

B Pump House and Sprinkler System 31 `Supply, Installation. Testing and Commissioning of Horizontally Centrifugal Single Stage Electric driven fire pumping set having capacity 2280 Lpm @ 70 MWC ` `Head complete with base plate, coupling guard, foundation bolts., with TEFC Motor suitable for 415V ` ±10%, 3 Phase 50 Hz AC supply of suitable HP for above `Pump running at 2900 RPM with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` Make: Kirloskar/wilo

30 `Providing and laying antishock rubberised mat of 12mm thickness for Pump House chamber complete in all respect` `comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In` Charge.

33 `Supply, Installation. Testing and Commissioning of Pressure Switch, inclduing wiring and connenction with ` Motor Control Panel for Automation of Panel . Charge. Make:lndfoss/Danfoss

34 `Supply, Installation, Testing and Commissioning of Pressure Gauge 100/80 mm dia with calibration of 0-14 ` Kg /Sq.Cm. . Charge. Make : FIEBIG/H.GURU

35 `Supply. Installation. Testing and Commissioning of PN 1.6 Butterfly Valve as per IS: 13095. complete with flanges, gasket, nut bolts etc. . of` Engineer In Charge. Make: KARTAR a) 200 mm dia (Gear operated)

35 `Supply. Installation. Testing and Commissioning of PN 1.6 Butterfly Valve as per IS: 13095. complete with flanges, gasket, nut bolts etc. . of` Engineer In Charge. Make: KARTAR b) 150 mm dia (Lever operated)

36 `Supply. Installation. Testing and Commissioning of 200 mm dia Y type strainer complete with flanges, gasket, nut bolts etc. .` Charge. Make : KARTAR

37 `Supply. Installation. Testing and Commissioning of Dual Plate Non Return Valve as per IS:5312, complete with flanges, gasket and nut bolts. with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` Make :Kartar a)150mmdla

37 `Supply. Installation. Testing and Commissioning of Dual Plate Non Return Valve as per IS:5312, complete with flanges, gasket and nut bolts. with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` Make :Kartar b)80 mm dia

38 `Supply. Installation. Testing and Commissioning of Anti Vibration expansion bellow complete with flanges, gasket and nut bolts. . of` Engineer In Charge. Make : Kanwal a)l50 mm dia

38 `Supply. Installation. Testing and Commissioning of Anti Vibration expansion bellow complete with flanges, gasket and nut bolts. . of` Engineer In Charge. Make : Kanwal b)80 mm dia

39 `Supply. Laying, Testing and Commissioning of Cabling for pump complete with base saddle, lugs, ferrule laid in ground/wall as required . of` Engineer In Charge. Make : Havells/RR/Finolex a) 2 x 1.5 Sqmm Copper Armoured Cable

40 `Supply. Installation. Testing and Commissioning of Draw Out Connection 100 mm dia. .` of Engineer In Charge. Make: Newage/MINIMAX/FYRMAX/SAFGUARD

41 `Supply. Installation. Testing and Commissioning of 100 mm dia Foot Valve 100 mm dia. .` of Engineer In Charge. Make : KIRLOSKAR/KARTAR

42 `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends.` Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . of Engineer In Charge.(Above Ground) Make: JINDAL/TATA a) 150 mm dia

42 `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends.` Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . of Engineer In Charge.(Above Ground) Make: JINDAL/TATA b) 100 mm dia

42 `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends.` Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . of Engineer In Charge.(Above Ground) Make: JINDAL/TATA c) 80 mm dia

42 `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends.` Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . of Engineer In Charge.(Above Ground) Make: JINDAL/TATA d) 65 mm dia

42 `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends.` Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . of Engineer In Charge.(Above Ground) Make: JINDAL/TATA e) 50 mm dia

42 `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends.` Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . of Engineer In Charge.(Above Ground) Make: JINDAL/TATA f) 40 mm dia

42 `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends.` Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . of Engineer In Charge.(Above Ground) Make: JINDAL/TATA g) 32 mm dia

42 `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends.` Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . of Engineer In Charge.(Above Ground) Make: JINDAL/TATA h) 25 mm dia

43 `Supply. Installation. Testing and Commissioning of of Pendant type Sprinkler 68 deg. with . material required to complete the work upto the` entire satisfaction of Engineer In Charge. Make : AQUA/HD/TYCO

44 `Supply. Installation, Testing and Commissioning of of Upwright type Sprinkler. with . material required to complete the work upto the entire` Make : TYCO

45 Providing, fixing, testing and commissioning of `U.L.listed corrugated SS-304 Braided flexible sprinkler pipe droplet for 12 kg/ sq. cm. working pressure with 1/2`` BSP threaded outlet ` `and 1`` BSP threaded inlet with reducer nipple, snap, clamp, T-bar bracket etc. with necessary fitting complete as required. 1500 mm Length ` Make: Tyco

46 `Supply. Installation, testing and Commissioning of Normal type Rosette Plate for sprinkler with . material required to complete the work upto the entire satisfaction of Engineer In Charge.`

47 `Supply, installation. Testing and commissioning of 150 mm dia Butterfly Valve with flange, gaskets nut bolts ` `Complelte in all respects with . material required to complete the work upto the` entire satisfaction of Engineer In Charge. Make : SIR/Kalpna/Kartar

48 `Supply. Installation. Testing and commissioning of 150 mm dia Flow Switch complete in all respect. .` Charge. Make:- System Sensor

49 `Supply. Installation. Testing and Commissioning of 150 mm dia Installation Control Valve Assembly complete in all respects .` Charge. Make : HD/Equivalent

50 `Supply and Installation of 50 mm dia Ball Valve 50 mm dia .` Charge. Make : Kartar

Bidder Name

Amount

Shishpal Govt. Contractor (GSTN-06AKPPP4326H1ZX) BID ID -1198469

M/S KRISHAN KUMAR CONTRACTOR (GSTN-NA) BID ID -1198603

M/S KRISHAN KUMAR CONTRACTOR (BID ID -1198603)

Shishpal Govt. Contractor (BID ID -1198469)