REPAIR TO SEWAGE LINE PATH CULVERT BOUNDARY WALL IN STN UNIT AREA UNDER AGE B/R-IV OF GE (AWC) MHOW AT ASC, EME WKSP, DEMO BTY, ARO AND FAFA QTRS.

Amount

Cleaning blockage of floor/nahani/bottle trap of wash hand basin/sink/bathrooms/kitchen by using hand pump with rubber bucket or by cleaning rod till clear flow of water is observed all complete all as specified and as directed.

Cleaning blockage of sewer lines in any position by rodding from both sides between two adjacent manholes or from inspection chamber to manhole or from gully trap to inspection chamber or through inspection eye of any depth till clear flow of sewer/water is observed complete all as specified and as directed for the 100mm dia (internal) of sewer pipe line. Note:- Unit rate quoted shall deemed to be included of cleaning of scurbs, grass small roots etc, around the manholes, inspection chamber at adjacent to the pipe lines cleaning etc and along sewage lines wherever required or as directed and no extra payment shall be made on this account).

Description same as per item No 02.00 above but for 150mm dia (internal) of sewer pipe line.

Cutting in to existing manhole’s for connecting new drains making good to pipe and rendering cutting out existing benching and forming brand channel ( ½ round or ¾ section) in cement concrete type B1 smooth finished and reforming benching as required internal dia pipe 100 mm dia pipes

Description same as per item No 04.00 but for 150mm dia.

M&L for cleaning of septic tank/ manhole of any capacity, inclduing excavation in trenches not exc. 1.5m in dept in mud in fould poistion by de-sludging, disilting and getting out all silt, sludge, organic and inorganic materials by manuyally / mechanically and removing the sludge to a distance exc 250 mtr but not exc. 500 mtr away from site and burrying in to pits and covered with earth including spreading bleaching powder @ 1 kg per sqm complete all as directed at site. After complete cleaning of septic tank the manhole cover shal be re-fixed in same position with CM 1:4 and bleaching powder spread on top surface of septic tank @ 1 Kg per septic tank complete all as specified and directed at site.

Description same as per item No 06.00- but depth of septic tank exc 1.5 Mtr and n. exc 3 mtr

Excavation in trench in any type of soil not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete.

Demolition and breaking up drain pipe of dia 100mm (internal dia) (salt glazed stoneware, AC or reinforced conrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up drain pipe of dia 150 mm (internal dia) (salt glazed stoneware, AC or reinforced conrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up drain pipe of dia 200 mm (internal dia) (salt glazed stoneware, AC or reinforced conrete) set in cement mortar complete all as specified and directed.

M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for the 100 mm internal dia of pipe complete all as specified and directed

M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for the 150 mm internal dia of pipe complete all as specified and directed

M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for the 200 mm internal dia of pipe complete all as specified and directed

Supplying, laying, jointing and testing salt glazed stone ware drain pipe of size 100 mm internal dia of pipe grade 'A' confirming to IS-651-1980 laid in trenches and jointed cement kmortar 1:1 complete all as specified and directed.

Supplying, laying, jointing and testing salt glazed stone ware drain pipe of size 150 mm internal dia of pipe grade 'A' confirming to IS-651-1980 laid in trenches and jointed cement kmortar 1:1 complete all as specified and directed.

Supplying, laying, jointing and testing salt glazed stone ware drain pipe of size 200 mm internal dia of pipe grade 'A' confirming to IS-651-1980 laid in trenches and jointed cement kmortar 1:1 complete all as specified and directed.

Returning, filling in Soft/Loose soil including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete.

Removing excavated material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete.

Demolition of brickwork or stone masonary built in cement mortar including all quoins, arches,pillars etc. complete.

M & L Brick work with sewer bricks straight or curved on plan exc 6 m mean radius for man-holes/septictank /soakwell etc, in sewer work in CM 1:4 complete all as specifed and directed.

Description same as per Item No. 21.00 above but except brick complete. Note : Old serviceable brick obtained from demolition shall be re-used. The rate quoted against this item is inclusive of necessary cleaning and stacking of bricks before incorporation in the work.

Taking down existing cement plaster on brick or stone wall including racking out joints, hacking for key, scrubbing down with water etc complete.

M & L 15 mm thick rendering in cement mortar 1:4 mixed with water proofing compound @ 3% per one Kg of cement by weight or as per manufacturer instruction on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete. Note : WPC shall be measured and paid separately as supply only

Supply only Integral water proofing compound complete.

M&L preparing surfaces and white washing three coat on walls.

Demolition of reinforced cement concrete of any description for manhole cover, slab of septic tank & soak well etc complete.

M & L providing pre-cast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab of manholes, septic tank, soak well etc set in cement mortar 1:4 with plain fair faces including chamfered weathering, throating etc including necessary use and waste of form work complete.

M&L for RCC 1:1 1/2:3 Type A-1 using 20mm graded stone aggregate as in slabs supported on wall, beam and columns in floors, roof slabs and in shelves complete

Use and waste form work to soffits of suspended slabs fair finished such as roof slabs, floor slabs, Landings and similar work not exceeding 200 mm thick, fair finished surface of concrete complete.

Use and waste form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings openings in concrete wall, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horisontal or sloping and smiliar work exc 10cm but n. exc 20 cm wide, rough finished surfaces of concrete complete

S & F mild steel TMT bars 6 to 8 mm dia as in reinforcement, cut to length, benty shape required including cranking, bending, spirally for hooping for columns, hooking ends and hinding with mild stee wire (annealed) not less than 0.9 mm dia or securing with clips complete.

M& L for loose filing of broken bricks aggregates, of gauge 80 to 150mm as in soakage pits, soakage walls etc, complete

S&F in repairs 75 mm internal dia of pipe PVC (SWR) single socketed in any length with solvent cement fixed to walls incluidng clamping complete.

S&F in repairs 110mm internal dia of pipe PVC (SWR) single socketed in any length with solvent cement fixed to walls incluidng clamping complete.

S & F in repairs Plastic water closet seat cover black or any colour and size closed patter with flat bottom, and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F 75 mm bore PVC cowl including taking out existing unserviceable cowl complete

S & F 110 mm bore PVC cowl including taking out existing unserviceable cowl complete

Demolition of cement concrete (un-reinforced in ground floors and paving not exc 15 cm thickness below or above ground level complete.

M & L PCC 1:3:6 type C-I using 20 mm graded aggregate as in mass concrete, foundation and any other location etc. complete.

M & L PCC 1:3:6 type C-I using 20 mm graded aggregate as in surface channel, drain etc. including necessary use and waste of form work complete

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds mitered or stopped ends etc. complete.

S & F in repairs, vitreous china wash down water closet pedestal pattern white,(excluding flushing cistern and flush pipe) with ‘P’ or ‘S’ trap including connection to trap and to flushing pipe and fixing of sheet cover ‘white’ complete including making good to floor complete.

M & L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in benching to drain, coping, bed block etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete.

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm X 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete.

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600mm long complete.

S & F in repair PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete.

S & F in repair 110 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed to complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed to complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed to complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed to complete all as specified and directed.

S & F in repair vitreous china urinal , full stall type white (excluding flushing cistern , flush pipe ) and waste pipe complete all as specified and as directed.

M&L for Vitreous china urinal partition white of size 310 X 700 mm fixed in repair

S & F in repairs vertical discharge pipe for Urinal.

S & F in repair, for vitreous china wash basin flat back of size 550x400mm pedestal pattern incl brackets, cutting for and pinning in ends or brackets, 32 mm dia waste coupling and down pipe and also refixing of piller tap , PVC connection complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete.

M&L non skid / mat finish ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L glazed ceramic colour tiles on vertical surfaces such as skirting and dado etc (300mm x 200 mm) x 7 mm thick, set and jointed in neat cement slurry and pointed in whtie or coloured cement to matfch including 10 mm thick plastering as screed bed in CM 1:4 etc all as specified and directed by Engr-in-charge.

Demolition of cement concrete in any description and any position etc removal from site up to 500 m complete all as specified and directed.

M&L for 75 mm thick PCC1:4:8 type D-2 using 40mm graded as in sub base of floor complete all as specified and directed.

M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 but except stone including dismantled of stone/boulder masonary built in cement mortar etc, all as specified and directed. Note :- Stone obtained from dismantled of stone masonary

M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 including demolition of stone/boulder masonary built in cement mortar etc, all as specified and directed

Supply only galvanised chain link fencing, any size or type, all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete as specified.

Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 10cm long and dia

S&F, angle iron (Fe-310) as in posts, struts in fencing including cutting top to shape required, drilling holes, notching for wire etc complete all as specified.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground.

M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth.

M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces not exceeding 10cm width or girth.

M & L 15 mm thick rendering on brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement complete, all as specified and directed.

M & L 15 mm thick rendering on brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement and including taking down cement plaster any description on brick or stone wall complete, all as specified and directed.

M & L Raised pointing to random rubbble masonry , coursed or uncoursed in CM 1:4 complete all as specified and directed.

S&F PVC (SWR) pipe 50 mm dia in any length provided as in brick wall as weep hole, complete all as specified and directed.

Providing precast cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate louvres and jallies, 40mm thick (measured solid), set in cement mortar 1:6 etc, including all mouldings, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron pickets or fencing post or any description etc, all as specified and directed.

S & F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Description same as per item No 78.00 but fixing only. Note : Old steel obtained from dismantling item shall be reused.

S & F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing, and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed.

Restraining & resecuring existing galvanised/ms barbed wire straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work complete.

M & L Preparation of new or previously untreated steel and iron surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

M & L Preparation of old steel and iron surfaces of any description, not otherwise description, over 10 cm width or girth apply one coat of synthetic enamel paint complete all as specified and directed.

S & F Reinforced concrete pipes 300 mm bore, class NP3 , laid and jointed complete with collars, including demolition and breaking up drain pipes, complete all as specified and directed.

Description same as per item No 85.00 but bore of pipes in 450 mm

M&L preparing of newly plastered or unplastered surfaces of walls, cornices etc and applying two coats of cement base paint over one coat of priming coat(chalk whitening) complete all as specified.

M&L preparing of old plastered or unplastered surfaces of walls, cornices etc and applying one coat of cement base paint on old decorated surfaces of wall complete all as specified and directed.

M&L Granite 20 mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platform and like, over & including 15mm thick screed bed or bedding layer in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour as per direction of GE, including demolition of stone slabs and tiles of any description or thickness etc. complete all as specified and directed

M&L for 80mm thick machine pressed precast interlocking paver block(glossy finished) with grey cement with pigment conferming to IS 15658-2006 of M-40 grade ,laid dry & jionts filled with fine sand and shape,colour and pattern as approved by GE,laid required colour and pattern over and including 30 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

M& L for providing precast cement concrete kerb blocks(machine pressed) ,solid,cement concrete type B-1,1:2:4 (20mm graded aggregate) finished at top bullnosed shape and finished surface even and smooth and jointed in cement mortar 1:4 stuck finished including necessary earth work complete all as specified and directed.

M & L machine pressed precast concrete 60 mm thick glossy interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and no pigment laid over dry sand cushioning, filling of joints with sand including demolition of stone slabs and tiles of any description or thickness etc. colour and shape approved by GE,complete all as specified and directed. (Note : Sand cushioning shall be measured and paid separately) .

M & L precast cement concrete curved stone with solid blocks, exc. 10 cm in width type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:6 etc. , complete all as specified and directed.

M & L sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed.

M & L glossy chequred cement concrete tile 25 cm x 25 cm x 20 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 20 mm thick screed bed in cement mortar 1:4 including including demolition of stone slabs and tiles of any description or thickness etc. complete all as specified and directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. and including demolition of PCC, complete all as specified and directed.

M & L for hard core of broken stone or boulders of gauge n. exc 63mm deposite, spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surfaces complete all as specified directed.

M & L providing factory made pre-cast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in landings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc set in cement mortar 1:4 including chamfered weathering, throating etc with necessary form work and including demolition of reinforced cement concrete complete all as specified and directed.

S & F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Dismantling of disturbed existing galvanised steel sheeting from the angle iron picket, MS square tube frame, or any other type of fixing and stacking the same a side or store safely and refixing the same to angle iron pickets or MS steel frame at old/new place after completetion of stone/ Brick wall work in any height , any position, any description, fixed galvanised sheet with coach screws and washers, as in wall clading, roof, or as view cutter over the boudary wall, etc. complete all as specifed and directed.

S & F Galvanised, corrugated mild steel 0.63 mm thick sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, wall clading, or as view cutter over the boundary wall, etc. including dismantling of corrugated steel sheeting, complete all as specifed and directed.

M & L Cutting up bushes, grass, eliphant gross,small branches of tree or any other type of obstacles to create workable space along the boundary wall and up to one meter wide from the wall to fixing of CGI sheet, barbed wire and concertina coil etc., complete all as specified and directed.

Felling of tree exc. 30 cm girth including cutting of trunk, and branches and stacking of serviceable material and disposal of unserviceable material to a distance n exc. 50 m and clearing site

yash enterprises

M/S Ashish Construction