SE/CEDC/N/CBE/07/2025-26

Amount

Clearing the light jungle and disposing away from site including cost of T&Ps, labour, lead, lift, etc., complete.

Earthwork excavation and depositing on bank with initial lead of 10 m and lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders in all soils including the cost of all materials, T&P 's, leads, lifts, etc., complete.

Earthwork excavation and depositing on bank with initial lead of 10 m and lift of 2m in Soft Disintegrated Rock (SDR), laterite, soft rock or kankar, not requiring blasting. including the cost of all materials, labour, T&P 's, leads, lift, etc., complete.

Earthwork excavation and depositing on bank with initial lead of 10 m and lift of 2m in MR & DMR not requiring blasting including the cost of all materials, labour, T&P 's, leads, lift, etc., complete.

Filling with M.sand for filling the foundation and floor including cost of all materials, labour, watering, consolidation, lead, lift, etc., complete.

Plain cement concrete in CC 1:3:6, using 40mm HBG metal including cost of cement, all materials, labour charges including consolidation, curing, lead, lift, etc., complete as per standard specification.

Reinforced cement concrete 1:1.5:3 mix using 12mm to 20mm HBGS machine crushed metal for raft foundation including cost of cement, all materials, labour, curing, shuttering, lead, lift, etc., complete as per standard specification (but excluding cost of steel reinforcement).

Reinforced cement concrete 1:1.5:3 mix using 12mm to 20mm HBGS machine crushed metal for Column upto ground level including cost of cement, all materials, labour, curing, shuttering, lead, lift, etc., complete as per standard specification (but excluding cost of steel reinforcement).

Reinforced cement concrete 1:1.5:3 mix using 12mm to 20mm HBG machine crushed metal for Grade beam including cost of cement, all materials, labour, curing, shuttering, lead, lift, etc., complete as per standard specification.

Reinforced cement concrete 1:1.5:3 mix using 12mm to 20mm HBG machine crushed metal for column above ground level including cost of cement, all materials, labour, curing,shuttering, lead, lift,etc., complete as per standard specification (but excluding cost of steel reinforcement)

Refilling foundation with gravel including cost of all materials labour all leads and lifts , watering, consolidation etc., complete as per standard specification and as per direction of the Engineer incharge.

Reinforced cement concrete 1:1.5:3 mix using 12mm to 20mm HBG machine crushed metal for plinth beam including cost of cement, all materials, labour, curing,shuttering, lead, lift,etc., complete as per standard specification (but excluding cost of steel reinforcement)

Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m alround the building including cost of all materials ,labour,lead,lift,etc., complete as per standard specification as directed by the incharge of site.

Brick work in CM 1:5 using class II bricks for super structure including cost of all materials, labour charges, curing scaffolding charges, curing , lead ,lift, etc., complete as per standard specification

Brick work in CM 1:3 using class II bricks for partition wall and steps including cost of all materials, labour charges, curing, scaffolding charges, lead, lift, etc., complete as per standard specification

Reinforced cement concrete 1:1.5:3 mix using 12mm to 20mm HBG machine crushed metal for lintel /Roof beam including cost of cement, all materials, labour, curing,shuttering, lead, lift,etc., complete as per standard specification (but excluding cost of steel reinforcement)

Reinforced cement concrete 1:1.5:3 mix using 12mm to 20mm HBG machine crushed metal for sill beam including cost of cement, all materials, labour, curing,shuttering, lead, lift,etc., complete as per standard specification (but excluding cost of steel reinforcement)

Reinforced cement concrete 1:1.5:3 mix using 12mm to 20mm HBG machine crushed metal for sunshade including cost of cement, all materials, labour, curing,shuttering, lead, lift,etc., complete as per standard specification (but excluding cost of steel reinforcement)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Lofts (75mm tk) including cost of cement, all materials, labour, curing,shuttering, lead, lift,etc., complete as per standard specification (but excluding cost of steel reinforcement)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Roof slab of 125 mm thick including cost of cement, all materials, labour, curing,shuttering, lead, lift,etc., complete as per standard specification (but excluding cost of steel reinforcement)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Roof slab of 100 mm thick including cost of cement, all materials, labour, curing, vibration charges, including shuttering all leads, lifts, etc., complete. (but excluding cost of steel reinforcement).

Providing steel reinforcement MS/RTS rods up to 16 mm dia for reinforced concrete works, including cost of steel rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification, etc., complete.

Plastering with CM 1:5, 12 mm thick for walls after electrical , piping work including the cost of all material, scaffolding charges, labour ,curing, lead, lift etc., complete as per standard specification.

Plastering with CM 1:3, 10 mm thick for ceiling,RCC works including the cost of all material, scaffolding charges, labour ,curing, lead, lift etc., complete as per standard specification.

White washing two coats with approved quality of white cement for ceiling including cost of all materials, labour, leads & lifts and as directed by Engineer at site.

Colour washing two coats using oil bound distember over one coat of white washing with white cement of best quality for inside wall including cost of all materials, labour, curing, all leads & lifts etc., complete, as per standard specification

Colour washing two coats of exterior emulsion paint with primer coat of approved colour and quality over one coat of white washing with white cement of best quality for outer wall surface including cost of all materials, labour, curing, lead, lift, etc., complete.

Dadooing walls with glazed tiles 300mmx200 mmx6mm of approved colour and make quality of ISI mark, laid in CM 1:2, 10mm thick and pointing with white cement using 0.40kg/m2 including finishing the joint and pointing flush with tile surface including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete as per standard specification.

Supplying and laying of Double charged Vitrified floor tiles of size 600x600x8 mm of approved quality and colour laid in CM. 1:3 , 20 mm thick and pointing with white cement using 0.40Kg./m2 including finishing joint and pointing flush with tiles surface including cost of cement, all materials, labour, curing, lead, lift, etc., complete.

Supplying and laying of anti skit ceramic tiles of approved size and design of approved quality and colour laid in CM. 1:3 , 20 mm thick and pointing with white cement using 0.40Kg./m2 including finishing joint and pointing flush with tiles surface including cost of cement, all materials,labour,curing, leads and lifts etc., complete.

Plastering with CM 1:3 20 mm thick including cost of cement, labour, curing, lead ,lift, etc., complete as per standard specification.

Supplying and fixing of Doors (Double leaf) using MS angle 50x50x6mm for door frame and 40x40x6mm for shutter frame and shutter 18 Gauge MS Sheet with stiffners both front and back M.S. Flat of size 32x3mm with 6" hinges heavy duty, all Iron anodized fittings, including Painting two coats ready mixed enamel paint with one coat of primer approved quality and colour, cost of all materials, lead, lift, labour, etc., complete as per standard specification.

Supplying and fixing of Doors (single leaf) using MS angle 50x50x6mm for door frame and 40x40x6mm for shutter frame and shutter 18 Gauge MS Sheet with stiffners both front and back M.S. Flat of size 32x3mm with 6" hinges heavy duty, all Iron anodized fittings, including Painting two coats ready mixed enamel paint with one coat of primer approved quality and colour, cost of all materials, leads, lifts labour, etc., complete as per standard specification.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with overall the edges of frame and shutter the shutter will beprovided with Espag multi power point locks and also it operates as handle.The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong lockingsystems and as per size for arresting noise and energy loss.The connecting mechanism between sash and outer frame that enables opening of the window.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved before use on work.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profilethe size of outer frame 60mmx58mm and shutter profile size of 60 x78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm.The EPDM rubber (black colour) covered with allover the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers.The ventilator should be fixed to the wall with 100% packing with screws and silicon packing allround the frames.The ventilator should be got approved before use on work

Supplying and fixing colour glazed earthen ware orriya type indian water closet of size 20" with flushing cistern of approved quality with 'P' and 'S' Trap embedded the closet with trap to shape in position with brick jelly concrete 32:12:5 using 40mm hard broken brick jelly finishing the top to required shape etc., including cost of all materials, labour, lead, lift, etc., complete as per standard specification.

Supplying and fixing in position white/ Colour glazed model floor Mounted European water closet of best quality and approved make with 100mm 'P' or 'S' trapconnecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing , spun yarn, teak wood plug, brass screw, etc., including supply and fixing 10 litre capacity PVC/ 12.5 litres capacity porcelin low level flushing tank with pair of CI brackets, etc., complete with all fittings, such as 15mm brass ball valve with polythene flot with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as 15mm brass connections, 15mm nylon connection, TW plugs, screws and also giving necessary connections to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re- doing the dismantled masonry to original condition, including cost of all materials, labour, lead, lift, etc., complete, complying with standard specifications. ( The EWC and flushing tank with all accessories should be got approved by the site Engineer before use on works)

Supplying and fixing glazed earthen ware without pedastal Hand wash basin of size 550x400mm reputed make with cast iron brackets, 32mm CP waste coupling rubber plugged chain 15mm GM wheel valve, Nylon hose connection, materials, lead, lift, transporting, labour charges etc., complete as per standard specification.

Supplying and fixing best quality of mirror of size 600x450mm with frame, SS soap tray, 600 mm SS towel rod, screw ,labour for fixing including cost of all materials, lead, lift, etc., complete as per the direction of Engineer incharge of work.

Supplying and fixing of 110 mm dia of 4 kg /cm2 PVC down fall rain water pipe of approved quality and ISI make including cost of bend, Elbow and shoe, labour, lead, lift, etc., complete as per standard specification.

Supplying, fixing, laying and testing of 25 mm dia UPVC pipe used for commercial purpose to handle higher water pressure of approved quality & ISI make for water supply including cost of pipe, specials, labour ,lead, lift, etc., complete as per standard specification.

Supplying, fixing, laying and testing of 40mm Dia UPVC pipe used for commercial purpose to handle higher water pressure of approved quality & ISI make for water supply including cost of pipe, specials, labour ,lead, lift, etc., complete as per standard specification.

Supplying and fixing in position of 25mm UPVC ball valve of ISI make of approved quality including cost of all materials, labour, lead, lift, etc., complete as per standard specification.

Supplying and fixing in position of 40mm UPVC ball valve ISI make of approved quality including cost of all materials, labour, lead, lift, etc., complete as per standard specification.

Supplying and fixing cuddapah slab of 20 mm thick polished both sides for Cup-Board including cost of all materials, labour for fixing in position , one coat of black paint in both side,lead, lifts etc., complete as per standard specification.

Supplying Granite slab of 20 mm thick polished both sides for cash collection centre including cost of all materials, labour for fixing in position, lead, lift,, etc., complete as per standard specification.

Supplying and fixing locking arrangements with lock 6 levers with 3 keys Godrej Navthal or any other approved good quality lock of reputed make including cost of all materials, labour, lead, lift, etc complete., as per standard specification.

Supplying and fixing of P.V.C. Water tank of 1000 Lits capacity of approved quality and make with all accessories including cost of all materials,labour for fixing , lead, lifts, etc., complete as directed by Engineer at site.

Providing fixing 15mm PVC heavy duty type screw down bib cock water supply tap including cost of pipe and labour fixing charges lead, lift, etc., complete as per standard specification

Providing and fixing ventilating shaft of PVC pipe 110 mm dia of 6 kg /cm2 ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, etc., complete. as per standard specification

Supplying and fixing 110 mm dia PVC Tee including cost of all materials, labour, lead, lift, etc., complete. as per standard specification

Providing sewage line with 110mm dia PVC pipe 6kg/cm2 of ISI make with all specials including cost of all material, lead, lift, etc., complete as per standard specification.

Supplying and fixing of CI iron man hole cover with frame of size 600 x600 mm heavy duty of approve quality for inlet and outlet manhole chamber including cost of all materials, labour for fixing ,lead, lift, etc., complete as per standard specification.

Wiring with 2 x 1.5 sq mm PVC unsheathed multistrand copper cable of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall and covering with 3mm thick hylum sheet with steel switch box with continuous earth wire connection 14 SWG TC wire and making good the damaged portion of masonry for PVC concealed light point / fan point (for electronic regulator).

Wring with 2 x 1.50 Sq mm PVC unsheathed multistrand copper cables of 1100 V Grade in Suitable PVC regid pipe concealed in wall and ceiling with PVC accessories in flush with wall using suitable steel switch box with 3mm tick hylum sheet covers for 5 A 3 pin non inter locking CS plug including pin top with continuous earth wire connection using 14 SWG TC wire and making good the damaged portion of masonry of PVC concealed plug point.

Wring with 2x 4 Sq mm PVC unsheathed multistrand copper cables of 1100 V Grade in Suitable PVC regid pipe concealed in wall and ceiling with PVC accessories in flush with wall using suitable TW switch box with 3mm tick hylum sheet covers for 15 A 3 pin non inter locking CS plug including pin top with continuous earth wire connection using 14 SWG TC wire and making good the damaged portion of masonry of PVC concealed power plug point.

Supply and fixing of 4' 18W LED 3000k flu.type fitting complete on wall/ceiling with tubes and PVC unsheathed Copper leads from terminal to the fitting.

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stoped electronic 300w regulater with 300mm down rod on the existing clamp.

Supply and fixing of CFL bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for incandescent lamp with guard and 11 W CFLbulb.

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark.

Supplying and fixing of TNEB meter board for 32A single phase service connection with 32A fuse unit

Providing Cup-board Shutter with frame using termite /water proof plywood of 19mm thick over with laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved before use on work.

Polishing two coats for cub board frame wood work with Touch wood polish over one coat of primer polish of approved colour and quality including cost of all materials, lead, lift ,labour charges etc., complete.

Supplying and fixing of PPGL (Prepainted Galvalume) roof sheet of 0.5mm thick & 1080 mm width with steel hollow section purlins and rafters of approved size including cost of all materials, labour, transporting, lead, lifts etc., complete as directed by Engineer at site.

Supplying and fabrication of aluminium partition section size of 95.25mmx44.45mmx 1.70mm standard IS make for bottom and 63.5mmx38.1mmx1.50mm for vertical, horizontal sections with exterior quality water proof 9mm thick partical board with powder coating of any colours prelaminated on both sides kiln dried soft wood of approved make for top & bottom sections and 4.00mm thick pinheaded glass for Intermediate panels including cost of all materials, lead, lift, labour charges, etc., complete in all respect.

Supplying and fixing of M.S Collapsible gate including cost of all materials and labour charges for cutting to required sizes, fabrication, welding charge ,fixing in position including two coats of enamel paint with one coat primer etc., complete as per the direction of Engineer incharge of work.

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work.

SGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

vetrivel constructions (BID ID -1361270)