Construction of 10 Nos C type Shop, RCC Deep Drain 0.90x0.90M at NMY Achhnera

Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches. (Chapter_4_Item_1)

Providing and laying cement concrete in 1:6:12 (1 Cement : 6 Coarse sand : 12 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. in Foundation and floors. (Chapter_5_Item_1)

Class-150 (Non Modular) brick work in 1:6 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. (Chapter_6_Item_1)

12mm Cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In girth and finished even and smooth. (Chapter_13_Item_2)

RCC work Providing and laying in position specified grade of in R.C.C. Raft foundation, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) (Chapter_5_Item_8)

Reinforced cement concrete work in beams, suspended floors, roofs having balconies, shelves, chajjas, bands, staircases and spiral stair cases above plinth level up to floor five level, including the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone). (Chapter_5_Item_12)

RCC work Providing and laying in position specified grade of in R.C.C. Raft foundation, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) (Chapter_5_Item_5)

Reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. including cost of centering, shuttering, finishing and excluding reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) ii) Above plinth level upto fifth floor lable (Chapter_5_Item_11B)

RCC work Providing and laying in position specified grade of reinforced cement concrete,Slab including the cost of centering, shuttering, finishing and excluding reinforcement - Above plinth level upto fifth floor lable : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone (Chapter_5_Item_11)

P/L integral cement based water proofing treatment BIRCK KOBA including preparation of surface as required for treatment of roofs, consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS. 2645 including adjoining walls upto 300 mm height. (b) Laying brick bats with mortar with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 to required slope including rounding of junctions of walls and slabs (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 including laying glass fiber cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final be flooded with water for a minimum period of two weeks for curing and for final test. With average thickness of 120 mm and minimum thickness at khurra as 65 mm. (Chapter 11 Item 4

Reinforcement of Reinforced concrete or reinforced brick work (When not included in and an over all rates) brought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its waistage Bend, hooks, Binding wire and authorized over lapping shall be measured upto floor two level. (DSR_2023_TMT500)

Mild steel and iron work of small size and section such as holding down Bolts, hold fasts, tierods, grating, etc. (When not included in and over all rates) brought to required form including supply of steel and its wastage including cost of bolts, nuts if required for proper completion of work including fabrication of holes in door chaukhats and nosing. Fabrication of grill/stairs case railing (Chapter_10_Item_1C)

Mild steel and iron work of small size and section such as holding down Bolts, hold fasts, tierods, grating, etc. (When not included in and over all rates) brought to required form including supply of steel and its wastage including cost of bolts, nuts if required for proper completion of work including fabrication of holes in door chaukhats and nosing.Fabrication of Z-Section steel windows including necessary steel fitting such as handles stay etc. (Chapter_10_Item_1D)

Supplying and fixing rolling shutters of approved make made of 8.25mm (3") x18 gauge cold rolled M.S. path interlocked through out their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brick etc. side guides and arrangement for inside and out side locking with push and pull operation complete with including the cost of top cover and spring. (Chapter_10_Item_5)

Earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift. the earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge (Carted Earth Beyoned 05 Km.) (AOR)

Sand filling in plinth including supply of necessary quantity of local sand from a distance not exceeding 8 Kms from the site of work and including watering dressing etc. required for proper completion of work (Chapter_4_Item_4)

Class-150 (Non Modular) brick work in 1:6 cement and Coarse sand mortar for super structure above plinth level upto floor five level including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than12cm. (Chapter_6_Item_1+5)

Class-150 (Non Modular) brick work in 1:3 cement and Coarse sand mortar for super structure above plinth level upto floor five level including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall 12cm and less. (Chapter_6_Item_4+6)

6mm Celling plaster 1:3 (1 cement : 3 fine sand) cement & fine sand in F.M. not less than 1.25, 1:3 including chiping of RCC surface before ceiling plaster. The cost of including all material, labour T&P and scafolding etc. complete. (Chapter_13_Item_13)

12mm Cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In girth and finished even and smooth. (Chapter_13_Item_1)

Distempering Two coat with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over & including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian, paints after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of approved synthetic material and sand papered smooth including cost of all materials. Ch- 15 Item_2)

Finishing walls with Acrylic smooth exterior emulsion paint (Apex) two coat of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.67 Ltr/10sqm including one coat of primer applid @ 2.20kg/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work.for two coat. (Chapter- 15 Item No- 05)

Painting or varnishing work in small areas or new wood work withone coat (upto one square metre) ready mixed priming paint and 2 coat of superior quality ready mixed paint or varnish including supply of all materials. Labour tools & plants etc required for proper completion of the work paint to be used should confirm (Chapter_15_Item_6)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per (Cost of aluminium snap beading shall be paid in basic item): ii) With float glass panes of 5.5 mm thickness (Chapter_9_Item_9B)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate (Chapter_14_Item_6)

Providing and fixing glass strips of 4mm thick in joints of floor and skirting at the time fo laying Including labour, T&P etc. complete in all respect. (c) 40mm wide & 4mm thickness (Chapter_14_Item_07)

Providing and laying cement concrete in 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and curing complete, Including cost of form work. In Foundation and floors. (Chapter_5_Item_6)

20 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. In Dedo (Chapter_13_Item_11)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter (Chapter_ 23 _Item _30)