SPECIAL REPAIR TO BLDG NO 24 RA LINE OF 148 LT AD REGT (COMP), PRON OF BATHROOM AND TOILET OF BLDG NO AC-28 (OR LINE) HELD ON CHARGE OF 9 ARTY BDE CAMP AND PROVN OF TOILET NEAR GUARD ROOM OF MT AT 9 INF DIV PRO UNIT UNDER AGE B/R-I AND AGE E/M-I OF G

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified & directed

M&L for old size brick work with sub class fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and directed.

M&L for old size brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified and directed.

Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed. .

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified and directed.

M & L for non skid coloured ceramic tiles coloured of 7 to 8 mm (square/ rectangular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed.

All as per described srl item No 7.00 here-in-before but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc complete all as specified and directed.

M&L for 18-20mm thick black granite stone slab machine cut in cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each complete all as specified and directed.

S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.

S&F for second class hard wood factory made 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30 mm thick second class hardwood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b), supplied and fitted to chowkats complete all as specified and directed.

M&L for fabrication and fixing BWP (Boiling water Proof) solid block Board 19 mm thick conforming to IS 1659- 2004 to be used ,inside depth not less than 0.50 metre. All the exposed surface which are or can be visible to be covered with 1.0 mm th. Sunmica of Approved colour, shade and finish. The surface which will come in contact with wall/ masonary/tiles etc shall be premiered with Appropriate Wood primer mixing Approved Antitermite chemical and pasting 250-micron water proof Plastic Sheet with appropriate adhesive. All the Pastings to be done with water resistant Adhesive. Any Butt joint should be strengthen with Screw and Fissures inserted with appropriate pasting compound. Shutters of storage unit to be formed out of 19 mm thick BWP ply and faced with 1.0 mm thick Sunmica. Provide shelf etc. made of 19 mm thick BWP B.B., polished to engineer-in-charge's approval. Complete Including with all necessary fittings like knobs, magnet catcher, running track for sliding, hinges any type, ball catchers, SS tower bolts 150mm , locks,SS handles 300mm long, adjustable shelves etc. as per directions of Engineer Incharge. Inside surfaces to be finished with 1.00 mm thick Sunmica and outer exposed surface with 1.00 mm th. Sunmica. Cupboard depth of 500- 600 mm including dismantling of old plywood/ prelam particle boards complete all as specified and directed. Note: 1.Rates inclusive of solid block board, adhesives, fittings/fixtures, Sunmica and plastic sheet etc and shall not be paid separately. 2.Front facing area shall only be considered for payment .

M&L for framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel over one coat of primer all as specified & directed

M&L for stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.

M & L for steel window box type using ERW 'P' section comprising double frame for gauged and glazed skeleton shutter jointed internally with flat iron 40x3mm complete including hinges, handle tower bolts stops, lugs etc all as shown on drawing complete all as specified and directed. Note (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mangeryas shown on drgs. (iii) Guard bars glazing & wire mesh shall be measured & paid for separately.

S&F 3mm thick sheet glass, ordinary quality, and glazing with oil putty/beading in square not exceeding 0.50sqm each pane complete all as specified & directed.

S&F 150mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F aluminium anodised tower bolts 150mm long, of extruded section complete all as specified and directed.

S&F aluminium sliding bolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F heavy weight butt hinges 100mm in size complete all as specified and directed.

S&F aluminium anodised barrel tower bolt with bright bolt 200 mm long complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M & L for applying 15 mm thick rendering using ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 200ml per cement bag or as per manufacturer instructions, complete all as specified and directed : Note:- rates incl Water proofing compound & shall not be measured and paid separately.

M&L for preparation of old surface /existing treatment by mechanical means complete all as specified and directed

M&L for preparation of new/old surface of of wall by applying 1mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified and directed.

S&F for 30 mm thick second class hardwood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing complete all as specified and directed.

Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) complete all as specified and directed.

M&L for form work to sides and soffits of beams lintels etc finished rough complete all as specified and directed.

M & L for RCC 1:2:4 Type B0 using 12.5mm graded stone aggregate as in beams, lintels, bressummers over 1.5 m span etc complete all as specified and directed.

M & L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all neccesary formwork & finishing exposed concrete surface complete all as specified and directed.

Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining ein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified and directed.

S&F mild steel TMT bars 500D 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

All as per described srl item no 39 here-in-before but 6 to 8 mm dia complete all as specified and directed.

S & F in repairs 25mm dia Stainless steel decorated curtain rod with bracket and ring complete all as specified and directed.

S&F Hand rails MS , half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 GDE Fe 410-W(Gde-E-250) quality B complete all as specified and directed.

M & L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finihes with and incl material and labore in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 /Bk work in CM 1:4 as required at site complete all as specified and directed.

Dismantling single layer mangalore pattern or similar tiles in roofing complete all as specified and directed.

S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping screws complete all as specified and directed..

Dismantling timber scantlings 40 sq.cm and over in section, in any position unframed work complete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

M&L for provision of GI frame work (snap grid) suitable for size as in false ceiling of size 605mmx605mm including fixing 4mm thick gypsum board /E-board in ceiling size 60cmx60cm fixed to metallic snap grid consisting of following and all as directed including dismantling wall and ceiling boards or insulation boards/slabs any thickness including cover fillets. (i) Gi sections incorporated in frame work shall conform to designation given in IS: 737-1986. (ii) The snap grid shall conist of GI frame work main/cross tee of size 36.5mmx25mmx1.0mm thick and 25mmx25mmx1.00mm respectively. (iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of Supply and fix 2mm to 4mm dia mild steel Gi wire. (iv) The main and cross tees shall be jointed at junction/crossings with GI frame work angle bracket, of size 15mmx15mmx1.0mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer's instructions. (v) The snap grid(main/cross tee section) shall be supported at ends all along the wall with Gi frame work angle of size 25mmx25mmx1.00mm anodized thick (vi) Size of the snap grid shall be 605mmx605mm. (vii) Minimum average thickness of anodizing shall be 15 micron complete all as specified & directed.

M&L for preparation of new/old plastered surfaces of wall by applying wall care putty averaging thickness 2mm and rubbing with sand paper for making smooth surface and applying two coat of oil emulsion distemper over one coat of primer through roller, complete all as specified and directed .

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete all as specified & as directed

M&L for TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete all as specified and directed.

All as described srl item no 54 here-in-before but 6 to 8 mm dia complete all as specified and directed.

M&L for RCC M-25(20mm graded aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, complete all as specified and directed.

M&L for RCC M-25(20mm graded aggregate) for columns, pillars, pierrs, posts & struts etc complete all as specified and directed.

M&L for RCC M-25(20mm graded aggregate) for beams cantilevers bressumers, lintels over 1.5m span etc complete all as specified and directed.

M&L for RCC design mix (20mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slab and in shelves and the like etc complete all as specified and directed.

M&L for flat form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter complete all as specified and directed.

M&L for form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal fair finished surfaces in shape complete all as specified and directed.

M&L for flat form work to sides and soffits of floors or roof beams haunching, girders bressumers lintel cantilevers shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed.

M&L for flat fair finished surfaces Form work to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc complete all as specified and directed.

M&L for Form work to rough finished surfaces of contrete of chullah hoods, chajja, troughs and similar items including edges complete all as specified and directed.

M&L for cement concrete 1:4:8, type D2(40mm graded stone aggregate) as in 75mm thick sub base complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exc 25cm in soft/loose soil complete all as specified & directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & directed.

M&L for Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surface etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4, mixed with liquid water proofing compound @ 200ml per 50Kg cement, surface finsihed even and smooth without using extra cement WPC shall be measured and paid separately complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 on ceiling surface, surface finsihed even and smooth without using extra cement complete all as specified and directed.

Supply only LIQUID water proofing compound complete all as specified & directed.

S&F framed work such as grill framed guard for fixing arrangement for wire cloth etc complete all as specified & directed.

S&F framed work as in doors or gates of angle or other section with gussets plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering, Doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete conforming to Fe-290 Gde- E-165 complete all as specified & directed..

M&L for preparation of newly plastered surface of wall and applying wall care putty aeraging thickness 2mm and rubbing with sand papr for making smooth surface and applying two coat of oil emulsion distemper over one coat of primer through roller complete all as specified and directed.

M&L for applying 2mm thick wall care putty making smooth surface complete all as specified & directed.

M&L for applying two coats of 100% premium arcylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, alkali & fungal rsistance, dirt resitance exterior paint of required shade (company Depot Thinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 Sqm over new surfaces suing roller for painting complete all as specified and directed.

M&L for preparing plastered un plastered new surfaces on ceiling and applying thre coats of white wash on ceiling surface complete all as specified & directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:6, surface finsihed even and smooth without using extra cement complete all as specified and directed.

S&F mild steel window with side hung shutters incl projecting type hinges with steel handle and steel peg stay complete with glazing complete with glazing bars, dovetailed or welded complete all as specified & directed.

S&F steel window with side hung shutters incl box type hinges with steel handle and steel peg stay complete with glazing complete with glazing bars, dovetailed or welded complete all as specified & directed.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

S&F 3.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

M&L for preparation of new steel surface of any description and applying two coat of synthetic enamel paint over a coat of red oxide over 10cm width or girth complete all as specified and directed.

S&F solid PVC door frame of size 50mmX 47mm made out of 5mm plain colour PVC sheet reinforced with MS Squre tube, complete all as specified and directed.

S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be coverd with hat moulded plain colour PVC 'C' Channel having a PVC sheet strip of 20mm width stuck inside with solvent complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section of 150 mm long complete all as specified and directed.

S&F Aluminium handles, cast type, anodised of 150 mm size complete all as specified and directed.

S&F Butt hinge, Stainless steel of 100 mm size complete all as specified and directed.

M&L for non skid coloured ceramic tiles coloured of 7 to 8 mm (squre/ rectungular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed cramic coloured tiles in vertical surfaces 450x350x7mm thick set and joined in neat cment slurry and pointed in white or coloured cement to match incl 15mm thick backing coat to receive tiles in CM 1:6 complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white(minimum), with grating and union for discharge pipe complete all as specified and directed.

M&L for urinal partition marble makrana white of size 310x700mm complete all as specified and directed.

S&F bib taps cast copper alloy 15mm size, crutch or butterfly handle, screed down, scree for iron pipe chromium plated complete all as specified and directed.

S&F tubes, medium grade, 15mm bore, galvanised with all fittings complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F tubes, medium grade, 20mm bore, galvanised with all fittings complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F brass chromium plated angle valve/stop valve 15mm size complete all as specified and directed.

S&F 10 ltr capacity low level valveless PVC, syphonic action type flushing cistern, white, with in let ball valve, float and handle complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I 500 Ltr capacity including suitable brass float valve complete all as specified and directed.

S&F mild steel sliding door bolts, 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F vitreous china WHB white flat black size 550 x 400mm including brass CP 15mm dia pillar tap, 32mm dia waste pipe with CP waste coupling bracket complete all as specified and directed.

S&F 15mm pillar taps, brass chromium plated with capstan heads, screwed down high pressure, ith or witout lettered Hot or Cold with long screwed shanks and fly nut screwed for iron pipe or for union and fixed to 15mm bore pipe, complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any lingth with rubber ring joints, laid in treenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any lingth with rubber ring joints, fixed to walls complete including faixing clamps complete all as specified and directed.

S&F PVC(SWR) bends 110mm bore any radius complete all as specified and directed.

S&F PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC connections 15mm size, 450mm long with PTMT nuts complete all as specified and directed.

M&L for 150mm dia salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

M&L for cement concrete 1:3:6, type C2 concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in 150mm dia pipe complete all as specified and directed.

S&F in repairs gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, 20mm bore complete all as specified and directed.

S&F brass chromium plated stop valve 15mm bore, fancy type, with long shank and cup (concealed type) screwed both end for iron pipe or for unions complete all as specified and directed.

M&L for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per sqm followed evenly by a tack coat @ 1.20 kg per sqm using 85/25 grade industrial hot blown bitumen, over it laid with 3mm thick APP modifid polymetic water proofing membrane reinforced with non-woven polyester fabric (weight not less than 160 gm per sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufactures instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20kg per Sqm and finally finished the top of polymeric water proofing membran with a coat of bituminous alumimum paint @ 0.20 kg per sqm as per manufactures instructions, complete al as specifed and directed (including existing water tank on roof disconnected and after cleaning sme position connecting) complete all as specified and directed.

M&L for form work to edges of concrete flats, treads, breaks in floors, window cills, concrete raillings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and directed.

M & L for brick work with fly ash sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L for applying two coats cement base paint on wall including preparing new plastered surface including 3mm wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coat of oil emulsion distemper over a coat of approved wall care putty complete all as specified and directed.

S&F steel ventilator with to hung shutter incl hinges steel peg stay complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F vitreous china squatting pan, 'Orissa' pattern size 580x440 mm white with integral foot rests including provision of lime concrete bedding complete all as specified and directed.

S&F chromium plated Over head shower 100mm dia round shape single flow ( ABS Body chrome plated with Gray face plate ) with rubit cleaning system complete all as specified and directed.

S&F PVC(SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC(SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls complete including faixing clamps complete all as specified and directed.

S&F PVC(SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC(SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls complete including faixing clamps complete all as specified and directed.

S&F PVC(SWR) junction single, (Single T) equal or unequal provided with access door 110mm bore complete all as specified and directed.

S&F PVC(SWR) junction single, (Single T) equal or unequal provided with access door 75mm bore complete all as specified and directed.

S&F PVC(SWR) bends 110mm bore any radius complete all as specified and directed.

S&F PVC(SWR) bends 75mm bore any radius complete all as specified and directed.

S&F PVC connections 15mm size, 450mm long with PTMT nuts complete all as specified and directed.

M&L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size, complete of size 2.40 M dia X 3.00M effective depth complete all as specified and directed.

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.

M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC conduit of size 20 /25 mm dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and duly complete all as specified and directed for the following :-

All as described srl item no 134 here-in-before but one tube light/Bulb/ Bldg security light point controlled by one, one way switch 05 / 06 Amps.

All as described srl item no 134 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as described srl item no 134 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as described srl item no 134 here-in-before butAll as per serial item No 02 (c) here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

S&F switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed.

S&F in repairs socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed.

S&F of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed

S&F in switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed.

S&F lamp holder (Angular / Straight), insulated body, with back plate complete all as specified and directed.

Supply anfd fixing LED lamp 9/10 watt complete all as specified and directed.

S&F LED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed.

S&F 35W LED building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting complete all as specified and directed.

S & F BLDC ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CMM with min service value 6 BEE 5 star rating, with brushless direct current motor complete all as specified and directed.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

M&L for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing incl taking down old u/s submain wiring complete all as specified & directed.

S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces incl taking down old u/s DB's complete all as specified and directed.

S&F TPN DB, 4 way, 415 V, double door type suitable for mounting incoming and outgoing MCB’s double pole/single pole,complete all as specified and directed.

S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces incl taking down old u/s DB's complete all as specified and directed.

S&F MCB, SP, AC, 240 volts "C" series capacity of 06 to 32Amps, 10kA and making connections complete all as specified & directed.

S&F Isolator, DP (Double Pole), AC, 240 volts, B series capacity 32 Amps and making connections complete all as specified & directed.

Supply , Laying and testing cable XLPE insulated screened, PVC bedded, Galvanised steel srip or wire armoured electric power cable (Heavy duty) 1100 V Grade, aluminium conductor of size 16 sqmm 4 core complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for laying of Cable or Pipe etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ losse soil and leveling of bottom surface to required level complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/ losse soil complete all as specified and as directed.

Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose complete all as specified and directed.

M & L for fly ash brick protection length of brick shall be laid across the length of cable) complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soft/ losse soil complete all as specified and as directed.

GI light grade tubing 40mm dia laid in trenches, road crossing , pasing through pipe or laid in wall/pole complete all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

S&F Exhaust fan steel body AC single phase 230/240V size 300 mm sweep with blades, and louvers including hole and plastering complete all as specified and directed..

S&F sheet metal enclosure single pole & neutral for 240 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCB SPN 40 Amps, 240 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

Supply , Laying and testing cable XLPE insulated screened, PVC bedded, Galvanised steel srip or wire armoured electric power cable (Heavy duty) 1100 V Grade, aluminium conductor of size 6 sqmm 2 core complete all as specified and directed.

S&L XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade cross sectional area of 16 sqmm 2 core complete all as specified & directed.

S&F Exhaust fan PVC body AC single phase 230/240V size 250 mm sweep with blades, and louvers complete all as specified and directed.

M/s Dev Enterprises (BID ID -3491427)

shahji contractors (BID ID -3492598)