Construction of cabinet for temporary seating at5 Chotelal ki Ghat

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. b) Extra rate for each addl. Floor over the rate of ground floor.

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. (a) upto 150 mm. thick

Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. Ground floor.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. Pakur Variety

Supplying, fitting and fixing boiling waterproof ply conforming to IS:710-1977 bonded with phenol formaldehyde syntheticres in conforming to IS:848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge.[excluding thecostof supporting framework and teak wood batten/Lipping] In Ground Floor

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming toIS:226, IS:808&SP(6)-1964connected tooneanotherwith bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length, fabrication with necessary bolting,metal arcwelding conforming to IS:816-1969 & IS:1995 using electrodes of approved make and brand conforming to IS:814-2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes,gas and hire charge of all tools and plants and labour required for thework including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only infinished work as per IS specified weight.Payment for gusset, bracket, cleat, rivets, bolts andnutsmay bemake by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighingnot less than22.5Kg. /m.o r15% of weight for finished structal members weighing less than 22.5Kg. /m.maybe increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items,as per direction of Engineer In Charge.The rates are considered for a height of erection 8m. /2nd floor level fromtheground.Add1.5%extraover therate foreach additional floor or 4m. beyond initiial 8m. or part thereof. For structuralmembersof specifiedsectionsweighing less than 22.5 Kg./m

Iron door handle of approved quality fitted and fixed complete: (i) 100mm x 5mm.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

a)Priming one coat onsteel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With other than hi-gloss of approved quality Two coats (with any shade except white)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : ) On timber or plastered surface With other than hi-gloss of approved quality Two coats (with any shade except white

Iron door ring of approved quality fitted and fixed with nut and washer complete. 50 mm dia

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fittedand fixed with cadmium plated screws: 100mm long x 10mm dia. Bolt

Iron butt hinges of approved quality fitted and fixed with steel screws,with ISI mark. 75mm. X 60mm. X 3.15mm

Supplying, fitting and fixing Godrej Multi Lock or equivallent .