Interior, Furnishing, Renovation, Electrification, Civil and Other Allied works for Centre of Excellence in State T.B. Centre IDGAH Hills, Bhopal

Amount

Providing and Fixing of Boundary Microphone Impedance: 150 ohm Noise: 22 dBA Sensitivity: -30 dBV DC Voltage: 48 Volts Maximum SPL (Sound Pressure Level): 120 dB Product Weight: 0.59 lbs Cable Length: 15 ft Color: Satin Black Warranty (Length/Type): Minimum Frequency Response (Bandwidth): 50 Hz Minimum Frequency Response (Bandwidth): 0.05 kHz Maximum Frequency Response (Bandwidth): 20000 Hz Maximum Frequency Response (Bandwidth): 20 kHz Microphone Connectivity - Wired Microphone Type - Boundary Polar/Pickup Pattern - Supercardiod Make: AKG/Sure/Byer dynamic or equivalent.

Providing and Fixing of has 36 Control Inputs. As with the Control Inputs 36 Control Inputs (GPI) 23 Logic Outputs (GPO) 8 NC/NO Relay Outputs 47 Commons for Simple Wiring 12 Reference Connections for 3-Wire Mode 2-Wire or 3-Wire Mode Specifiable per Input Bank 1 Opto-Isolator for Fault Monitoring Rich Palette of Logic Objects 2 PoE-Enabled Ethernet Ports for Configuration, Control, Monitoring, Primary Power, and Redundant Comms 12VDC Secondary Power Connector for Power Source Backup 48 User-Configurable LEDs (Front Panel) User-Configurable LCD (Front Panel) 4kHz Piezo Buzzer for Audible Indication Bi-Directional Locate Functionality. Make: BSS or equivalent.

Providing ad Fixing of Conferencing Processor with AEC 12 Analog Inputs (with 48v Phantom Power per Channel) 8 Analog Outputs Configurable Signal Processing 12 Channels of AEC Processing with Auto Gain Control and Noise Cancellation Rich Palette of Processing and Logic Objects 48 Channel, Low Latency, Fault Tolerant Digital Audio Bus Clear Front Panel LED Indication Bi-Directional Locate Functionality 12 Control Inputs and 6 Logic Outputs for GPIO Integration. Make: BSS or equivalent.

Providing and Fixing of of System Interconnects

Audio Equipment Rack : Providing & Fixing of pre-wired standard 19”Audio Equipment Rack made of Die extrusion aluminum with front /rear doors, power panels, casters wheel and cooling fan etc suitable enough to accommodate all Rack mounted Audio equipment.

Supplying, Installation, testing & commissioning of HDMI Switcher with 4 Nos. Of HDMI Input and 4 Nos HDMI Output Make : Aten/Fidelity/AMX or equivalent.

Supplying, installation and testing of USB Condenser Studio Microphone inluding Mic Stand, Pop filter, Side-address studio condenser with USB digital output (Windows and Mac compatible) Built-in headphone jack with volume and mix controls Smooth, extended frequency response Crystal-clear, natural sound for podcasting, home studio recording, field recording, and voiceover use Make : Audio Technica, Sure, AKG or equivalent.

Supplying, installation and testing of PRO headphone with Impedance : 64 ohms, Frequency response (Headphones) : 6 Hz - 25kHz, Max. sound pressure level : 123 dB SPL @ 1 kHz, Contact pressure : 6.0 N ± 0.75 N, Ear coupling : circumaural, Power consumption : 500mW, Storage temperature : -55°C to +70°C, Operating temperature : -15°C to +55°C, Distortion : ‹ 0.1 % @ 1 kHz, 100 dB SPL, Sensitivity : 108 ±3 dB SPL / 1 V rms / 1 kHz, Transducer principle (headphones) : dynamic, closed Weight w/o cable : 297 g, Noise cancellation : Max 32 dB (passive).

Supplying, installation and testing of Desktop : Intel core I5 or higher Processor, windows 10 , 16GB Ram , HDD - 1 TB, SSD - 500 GB, Monitor 20", Monitor Resolution (pixel) 1920.10, on site OEM warranty - 3 year, chip series - H or Higher, Graphic Type - integrated, OS certification - windows, Ram Expandability up to 32GB, number of hdmi ports one or higher etc. complete. Make : Dell/HP/Asus or equivalent.

Supplying & installation of Pro version of Sound Editing Software (Steinberg - CUBASE/ Soundforge)

Supplying, installation & testing of 6.5 Inch professional studio monitor, 3-D Imaging Waveguide allows you to hear a 3-D soundstage from a stereo pair of speakers.High excursion, dual layer low frequency voice coil resulting in clearer sound with lower harmonic distortion, and exceptional dynamic range. Advanced port tube design for detailed and punchy low frequency, without any unwanted noise With 85 dB continuous output at 2 meters (roughly 6 feet,) and 20 dB of headroom, the LP-6 is plenty loud for almost every 1 or 2 person listening space. This includes home studios, editing bays, and most control rooms. Make : Kali/JBL/Martin or equivalent.

Supplying, installation & testing of USB Audio interface soundcard INSTRUMENT INPUTS : Frequency Response : 20Hz - 20kHz ± 0.1dB, Dynamic Range : 110dB (A-weighted), THD+N <0.03%, Maximum Input Level : 12.5dBu (at minimum gain), Gain Range : 56dB, Impedance : 1.5MΩ, LINE/MONITOR OUTPUTS : Dynamic Range (Line Outputs) : 108dB, THD+N : <0.002%, Maximum Output Level (0 dBFS) : 15.5dBu, Impedance : 430Ω, HEADPHONE OUTPUTS: Dynamic Range : 104dB (A-weighted), THD+N : <0.002%, Maximum Output Level : 7dBu, Impedance :<1Ω. Make : Focusrite/Behringer/Rode. or equivalent.

Supply, Installation, Testing & Commissioning of 82" White Interactive Board with Finger Touch Technology, Multi-User Capability, ​Ultra narrow design, Infra-Red technology, Gesture recognition, ,​Shortcut key on both sides Wide range of tools Multi-touch technology Including Accessories USB Cable,Pen,Fixing Clamp and CD etc.

Supplying, installation and testing of Desktop : Intel core I3 or higher Processor, windows 10 , 8GB Ram , HDD - 1 TB, Monitor 20", Monitor Resolution (pixel) 1920.10, on site OEM warranty - 3 year, chip series - H or Higher, Graphic Type - integrated, OS certification - windows, Ram Expandability up to 32GB, Type of Ram DDR4, number of hdmi ports one or higher etc. complete. Make : Dell/HP/Acer or equivalent.

Supplying, installation and testing of Laptop : Intel core I3 or higher Processor, windows 10 , 8GB Ram , HDD - 1 TB, Monitor Resolution (pixel) 1920.10, on site OEM warranty - 3 year, chip series - H or Higher, Graphic Type - integrated, OS certification - windows, Ram Expandability up to 32GB, Type of Ram DDR4, number of hdmi ports one or higher etc. complete. Make : Dell/HP/Acer or equivalent.

SITC of 3700 Ansi Lumens Ultra short throw LCD projector with a suite of advanced features, Min Brightness : 3700 Ansi Lumens Projection Technology 3LCD, 3 chip technology, Resolution WXGA 1280 x 800, White Light Output 3,700 ANSI lumens, Color Light Output 3,700 ANSI lumens, Colors 16.7 million colors, Aspect Ratio Native 16:10 / 4:3, 14:9 and 16:9 compatible, Contrast Ratio 20,000 : 1 (using active IRIS), Throw Ratio (distance : width) 0.2 : 1 from edge of projector to screen 0.3 : 1 from mirror cover to screen, Display Size 60" - 100" Lens f = 4.21 mm, digital zoom x 1.35, powered focus Lamp Wattage 250W Make : Maxel/ Epson/ Sharp or equivalent.

providing and Fixing of high Quality Signal Cable Jacket PVC, ø 8.80 mm, marine blue Shield No. 1 Bare copper wires (0.10 mm), 100% coverage Shield No. 2 Bare copper wires (0.10 mm), 100% coverage Layer Polyester nonwoven thermally bonded, both sides alum. coated Separation Filler material viscose Conductor shield layer Polyester nonwoven thermally bonded, both sides alum. coated Cond. copper shield Bare copper wires (0.10 mm), 100% coverage Isolation Cellular PE, ø 2.00 mm, 4 different colors Conductor Stranded bare LCOF copper wires, 64 x 0.10 mm (4x) (0.50 mm²)

Supply, Installation, Testing & Commissioning of Mounting arrangement for projector.

Providing, Laying and Installation of HDMI Cable.

Providing & Laying of 2-core 2.5 sq. mm. Shielded Twisted pair loudspeaker cable. Make : Liberty/Finolex/Lapp

Providing & Laying of Special 2-core shielded Mic Cable.

Supply, Installaton, Testing & Commissioning of Motorised Projector Screen - 8 x 6, Matt White, 220 V Make : Liberty/Suvira/Elite

Supplying, testing & commissioning of Water Bath lab equipment of Standard Make.

Supplying, testing & commissioning of Weighing Balance-Analytical lab equipment of Standard Make.

Supplying, testing & commissioning of Weighing Balance- Precision lab equipment of Standard Make.

Supplying, testing & commissioning of Distilled water Plant lab equipment of Standard Make.

Supplying, testing & commissioning of Universal Hot air Oven lab equipment of Standard Make.

Supplying, testing & commissioning of Acid Dispenser lab equipment of Standard Make.

Supplying, testing & commissioning of RO lab equipment of Standard Make.

Supplying, testing & commissioning of Refrigerator 165 ltr lab equipment of Standard Make.

Supplying, Designing, installation, testing and commissioning of off grid Solar Plant including Polycrystalline PV Module of rating equal or more than 250 Wp, 72 Cells of required capacity, string inverter, DC Cables, Connectors, Design + Supply of Structutre elevate+ normal Structure for Module Mounting of MS Painted with SS 304 Nut, Bolt Washers. The structutre shold withstand to design 150-200kMh wind speed and have STADD Pro Report with QC, etc. complete as required.

Supply of XLPE insulated 1.5 sq. mm. Armoured 2 core FRLSZH fire alarm cable (RED) Fire Survival Cable conforming IS-7098 (Part-1) 1988, 1100 Volt grade, 2/3/4/8/10/12 core ISI marked with copper stranded/solid conductor.

Centre Table 1000x600x400 - Providing and placing center table as per drawing made of 18MM BWP ply finished with 1.0mm laminate of approved shade. The top covered with 12mm. thick toughened glass with polished and beveled edges fitted with 3" stainless steel studs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge.

Two seater Sofa - Providing and fixing in position fully upholstered sofa made with 18mm BWP ply and B grade teak wood frame. flat spring below foam at seat, stitching, slopes color, hemming with seat of 80mm thick softy foam and reckon filler, 100mm 40 density foam on back and arm with 40mm thick high density foam, seat and back covered with best quality markeen, and finished in fabric (of not less than Rs 1000 per mtr) of approved colour, texture and quality including teak wood molding / frame sofa to be made in the module of two seater with arms on both face, seat size 500x550mm over all depth 700mm. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge.

Corner Table 600x600x400 - Providing and placing corner table as per drawing made of 18MM BWP ply finished with 1.0mm laminate of approved shade. The top covered with 12mm. thick toughened glass with polished and beveled edges fitted with 3" stainless steel studs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge.

Providing and fixing of storage units (laminate finish) (1500 mm wide) - Providing and fixing at site file / storage cabinet made up of 18MM BWP ply with 1mm thick laminate as per drawing. All shelves and partitions to be made up of 18MM BWP ply and Pallah to be made up of 12mm. thick BWP ply fixed with hinges of approved make. All exposed edges to be finished with 1st quality teak wood beading to be melamine polished / PU coating and all inside surfaces to be finished with 1.00mm laminate. The cost is inclusive of all materials accessories, SS handles, lock, labour, etc. complete in all respect as per drawing and direction given by Engineer in charge.

Supplying & fixing of steel rack Dimensions W x H x D (cm) 89.8-92.5 x 183-189 x 30-60

stool 600x600x450 - Providing and placing center table as per drawing made of 18MM BWP ply finished with 1.0mm laminate of approved shade. The top covered with 12mm. thick toughened glass with polished and beveled edges fitted with 3" stainless steel studs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge.

Table counter, 600 mm wide - Providing and fixing table of specified size to be made up of 18MM BWP ply as per drawing using approved make hardware, having a storage unit with one drawers as per given drawing. Provision has to be made for keyboard tray, CPU stand. All exterior surfaces to be finished in 1.0mm laminates / corian as required specified by Architect and inner surfaces finished in 1.0 mm laminate of approved shade with necessary hardware such as handles wire manager, telescopic drawer slides, etc as per design all exposed edges to be finished with first quality Teak Wood beading which is to be melamine polished / pu coating. The cost is inclusive of all materials and labour etc complete in all respect as per drawing and direction given by Engineer in charge.

Providing and fixing of Conference Hall /Marketing room Table 600mm. wide made of 18MM BWP ply finished with 1 mm thick laminate inner and outer side. The table top front will be 24mm. thick with teak wood beading. Provision for foot rest, wire manager shall be made. all exposed edges to be finished with first quality Teak wood beading which is to be melamine polished/ pu coating. The cost is inclusive of all materials and labour etc complete in all respect as per drawing and direction given by Engineer in charge.

The seat and back shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric and moulded polyurethane foam all around. The moulded polyurethane foam shall be of density 55+/-5 kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50 cm(W) x 47.0cm(H).The armrests should made of black integral skin polyurethane with 40-55 shore hardness and reinforced with M.S insert .The mechanism of the chair shall have following features : 360⁰ revolving type, Synchro single position mechanism, Tilt tension adjustment . The chair shall be provided with pneumatic height adjustment which shall have stroke of 12 cm. The pedestial shall be injection moulded in black glass-filled Nylon. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65 +/- 1 cm pitch-centre-dia (70 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 70cm, Depth of Chair - 70 cm as measured from pedestal below. Height from ground - min 92.0 to max 104 cm. Seat height - min 45.0 to max 57.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA X7.1standards (HAWORTH/ HERMANMILLER/ GODREJ/WIPRO/ FEATHERLITE/HOF. MAKE )

Table - 1200 x 750 x 750 - Providing and fixing table of specified size to be made up of 18MM BWP ply as per drawing using approved make hardware, having a storage unit with one drawers as per given drawing. Provision has to be made for keyboard tray, CPU stand. All exterior surfaces to be finished in 1.0mm laminates/ corian as required specified by Architect and inner surfaces finished in 1.0mm laminate of approved shade with necessary hardware such as handles wire manager, telescopic drawer slides, etc as per design all exposed edges to be finished with first quality Teak wood beading which is to be melamine polished / pu coating. The cost is inclusive of all materials and labour etc. complete in all respect as per drawing and direction given by Engineer in charge.

Providing and fixing Dorma TS-68 door closure with standard arm EN2/3/4, necessary accessories and screws etc. complete.

ROLLER BLINDS:- Providing and fixing of roller blinds of washable fabric duly fixed with powder coated channel and clamps having nylon code for operation of approved color etc. complete in all respect as per direction given by Engineer in charge. (Vista / NBT /MAC/ WINDOW TECH)

SITC Video conferences must have Video standards and protocols H.261, H.263, H.264 AVC, H.264 High Profile, H.264 SVC, RTV H.239/Polycom People+Content H.263 & H.264 video error concealmen Video input 1 x HDCI 1 x HDMI 1.3 1 x VGA Video out 2 x HDMI 1.3 resolution 1080p, 60 fps from 1740 Kbps 1080p, 30 fps from 1024 Kbps Content video resolution Input - HD (1920 x 1080i), HD (1920 x 1080p) - WSXGA+ (1680 x 1050) Output - WUXGA (1920 x 1200) - HD (1920 x 1080) - WSXGA+ (1680 x 1050) Audio input 1 x RealPresence Group microphone array input port (supporting a total of 4 microphone arrays) USB headset support 1 x HDCI (camera) 1 x HDMI 1 x 3.5 mm stereo line-in Other interfaces 2 x USB 2.0 1 x RS-232, 8-pin mini-DIN Automatic gain control Automatic noise suppression Keyboard noise reduction Network IPv4 and IPv6 support 1 x 10/100/1G Ethernet Auto-MDIX H.323 and/or SIP up to 6 Mbps Polycom Lost Packet Recovery (LPR™) technology Reconfigurable MTU size RS232 with API support Multi Party Lisence Would be Extra one year warranty pack and multi party (1+5) license. Make : Polycom/Cisco or equivalent.

Supplying, installation & testing of 65" 4K UHD LED display with 4K1 HDR Processor X1 Technology, HDMI x 4 Side, USB x 2 Side, Component In (RGB Cable) x 1 Side (Mini Jack), Composite In (Audio Video Cable) x 1 Side (Mini Jack), Headphone Jack x 1 Side, Digital Audio Output x 1 Side, Audio Out x 1 Side, RF Connectivity Input x 1 Side, RF Connectivity Output x 1 Side, Analog Audio Input x 1 Side, Analog Conversion,20W inbuilt Speakers, Sound Technology : X-Balanced Speaker, Clear Phase, Auto Surround, S-Master Digital Amplifier, Dolby Audio, Dolby Atmos, Advanced Auto Volume, Surround Sound, DTS Digital Surround, Supported Audio Formats, Dolby Audio, Dolby Atmos. Make: Sony/LG/Samsung

Supplying, installation & testing of 43" 4K UHD LED display with 4K1 HDR Processor X1 Technology, HDMI x 2 Side, USB x 1 Side, Component In (RGB Cable) x 1 Side (Mini Jack), Composite In (Audio Video Cable) x 1 Side (Mini Jack), Headphone Jack x 1 Side, Digital Audio Output x 1 Side, Audio Out x 1 Side, RF Connectivity Input x 1 Side, RF Connectivity Output x 1 Side, Analog Audio Input x 1 Side, Analog Conversion,20W inbuilt Speakers, Sound Technology : X-Balanced Speaker, Clear Phase, Auto Surround, S-Master Digital Amplifier, Dolby Audio, Dolby Atmos, Advanced Auto Volume, Surround Sound, DTS Digital Surround, Supported Audio Formats, Dolby Audio, Dolby Atmos. Make: Sony/LG/Samsung

Handheld type Cordless Microphone : Providing & Fixing of professional Handheld / Lavalier type Cordless Microphone. Make: AKG/Sure/EV or equivalent.

Lavalier type Cordless Microphone : Providing & Fixing of professional Handheld / Lavalier type Cordless Microphone. Make: AKG/Sure/EV or equivalent.

Supplying, installation and testing of High quality Document Scanner with scanning speed of ≤ 45 PPM & ≤ 90 iPM, 60 sheets ADF, Scanning technology includes 2 sided scanning, various type of documents ie passport, supports ultra thin paper etc. complete as per specification. Make : Cannon/HP/Brother or equivalent.

Supplying, installation & testing of Biomatric reader with face recogniation with Credential Support Bluetooth (BLE), Fingerprint, RFID Card, PIN, Face (with Compatible Hardware) IP Rating IP65 (With wall mounting installation condition and flush mounting with recommended installation surface) RF Option Smart Cards - MIFARE Classic® and NFC Tag and HID iCLASS Proximity Cards - EM Prox and HID Prox (Separate variant for each card type. HID PROX requires HID iCLASS type). Make : ESSL/Matrix/HID or equivalent.

Computer Table - 1200 x 600 x 750 - Providing and fixing table of specified size to be made up of 18MM BWP ply as per drawing using approved make hardware, having a storage unit with one drawers as per given drawing. Provision has to be made for keyboard tray, CPU stand. All exterior surfaces to be finished in 1.0mm laminates/ corian as required specified by Architect and inner surfaces finished in 1.0mm laminate of approved shade with necessary hardware such as handles wire manager, telescopic drawer slides, etc as per design all exposed edges to be finished with first quality Teak wood beading which is to be melamine polished/ pu coating. The cost is inclusive of all materials and labour etc complete in all respect as per drawing and direction given by Engineer in charge.

Providing And Placing of Midback Revolving CHAIR : The chair should be of size 60.9 (W) x 64.3 (D) 99.5cm cushioned seat is to be made of injection molded plastic outer & inner. Plastic inner shall be upholstered with leatherette and moulded high resilience ( H R) Polyurethane foam of density 45+/-2kg/m compression. Seat Size should be 47.0 cm(W) x 48.0cm (D).The cushioned back is to be made of PU Foam with insitu molded MS E.R.WRound Tube of size 1.9+/-0.03cm x 0.16+/-0.0128cm. duely upholstered with leatherette. Mechanism - Hydrolic. Make- Wipro/Godrej/Featherlight/HOF (Greenguard GOLD/GRIHA /BIFMA) Design as approved by Engineer-In-charge.

Overall Dimensions: H1980 x W915 x D485mm 2. Material: Prime quality MS CRCA sheets 1.0mm for front, sides and shelves & 0.6 mm for back. 3. No. of shelves: No. of shelves Four forming five compartments. 4. Locking Mechanism: Two way bolting device with six levers superior quality standard make lock with duplicate keys. 5. Pedestal: Made of 1.00mm CRCA sheet. Height 125mm. 6. Doors: 3mm thick glass paneled doors with suitable framework. 7. Hinges: Double folded type hinges made of MS CRCA sheet 1.8mm to 2.0mm. Three hinges for each door leaf. 8. Finish: Glass Door Cabinet shall be powder coated after seven tanks anti corrosion pretreatment. 9. All the accessories shall be superior quality and standard make.

Providing and Placing of 6 Seater Dining Table including chairs with Glass Top : It should be of size - 1800 x 1060 x 760mm Having Top thickness of 25 mm + 12 mm glass top, Leg shall be 100 x 100 mm. Finish should be Brown Oak with 30% gloss. Approved Make - Haworth/Herman Miller/Godrej/Knoll or equivalent. (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge.

Supply of Electric stacker

Supplying installation & testing of Thermal Barcode and colour lable printer. Make : HP/Brother/Cannon or equlaint.

Supplying installation and testing of semi automatic Cartoon Flap folding packing machine.

Supplying installation & testing of Handheld Barcode Scanner Wired USB Optical Laser Black Imager Corded Reader. Make : Zebra or equlaint.

Supplying & fixing of steel rack Dimensions W x H x D (cm) 89.8-92.5 x 183-189 x 30-60

Supplying of Platform long Trolley with minimum 50 kg Capacity, Steel Portable Foldable Multi-functional Dolly Push Cart with 360 Degree Swivel Wheels. Make : Stanley or equivlaint.

Supplying of industrial grade Electric weighing scale with minimum 100 kg capacity.

Supplying of Steel Folding Ladder with Wide Steps Minimum 7 Steps. Note:- The Bidder Shall quote his own rates for item rates.

Bidder Name

Amount

ABBOTTSONS IMPEX PVT LTD(GSTN-23AAECA7527R1Z9)

BONTON TECHNOMAKE PRIVATE LIMITED(GSTN-23AABCB4237A1ZH)

BONTON TECHNOMAKE PRIVATE LIMITED

BONTON TECHNOMAKE PRIVATE LIMITED