PROVN OF CHANGING ROOM NEAR WORK PLACE IN TECH AREA AND OTHER CERTAIN REVENUE MINOR WORKS AT AF STATION UNDER GE AF TAMBARAM

Amount

Supply and fixing aluminium Powder coated (Minimum thickness of powder coating 50 microns) frame for windows/ Doors/Ventilators/Particians with one or more tracks including joining cleats/ channel for fixing glass/ mesh complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed by Engineer-in-Charge. Note : Necessary glass and Particle board shall be measured and paid separately in relevant items.

M&L for Pre laminated particle board 12 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination with lipping as in doors of cupboards and cabinets complete all as specified and directed by Engineer-in-Charge.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty wooden beads as directed in squares n exc 0.50 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F Mild Steel 4 levers mortice lock vertical type size 100mm dia complete all as specified and directed by Engineer-in-Charge.

S&F door closer, aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80kg complete all as specified and directed by Engineer-in-Charge.

S&F bevelled edged looking mirror 6mm thick with Design wooden frame work fitted with 6mm thick commerical ply or AC sheet backing to mirror fixed complete all as specified and directed by Engineer-in-Charge.

M&L Roughening surfaces of old concrete floor by picking, sweeping, clean and washing down with water to remove duest etc and Brushing neat cement slurry with 3.0kg of cement per square metre complete all as specified and directed by Engineer-in-Charge.

M&L for 75 mm thick Plain Cement Concrete 1:4:8, Type D2 Nominal mix (using 20 mm graded stone aggregate), as in sub base complete all as specified and directed by Engineer-in-Charge.

M&L for vitrified ceramic coloured tiles light shade 10 mm thick (square / rectengular) polished area of each tile n exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1 :4 in floors etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 10 but in vertical surfaces set set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium snap grid frame work of size of grid 605 x 605mm for false ceiling complete all as specified and directed by Engineer-in-Charge.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engineer-in-Charge.

S&F12 mm Perforated particle board/tiles for insulation and accoustic purposes,60x60 cm in size, fixed with nails to timber framework or with staple on snap grid timber/GI/Aluminium framework with screws complete all as specified and directed by Engineer-in-Charge.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including wind ties as per manufacturer instructions complete all as specified and directed by Engineer-in-Charge.

S&F Structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410-W (Gde-E- 250) quality-A complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Taking down old cement plaster including racking out joint hacking for keys and scrubbing down with water etc., on wall/ ceiling surfaces and removing the debris from the defence premises complete all as specified and directed by Engineer-in-Charge.

S&F glazed ceramic tiles in vertical surface 300x450x7mm/ 350x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match floor tile over and including a backing coat in 10mm thick Cement Mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Supply and fix Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheetinclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing & manufacturer instruction complete all as specified and directed by Engineer-in-Charge.

Supply and fix 5mm thick PVC sheet fillet of width35mm for wall paneling inclusive offixing on to wall to make PVC Frame as per specification and drawing & manufacturer instruction complete all as specified and directed by Engineer-in-Charge.

M&L for pre laminated particle board 25 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination with lipping as in doors of cupboards and cabinets complete all as specified and directed by Engineer-in-Charge.

S&F 75mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed by Engineer-in-Charge.

S & F 40mm width Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed by Engineer-in-Charge.

S&F 75mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge.

S & F Harrison rails,anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and directed by Engineer-in-Charge.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

Dismantling timber scantlings in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section in framed work complete all as specified and directed by Engineer-in-Charge.

Taking down Shutters of any description n exc 1 sq. m each complete all as specified and directed by Engineer-in-Charge.

Supply and fix towel rail 600mm long with flanges, chromium plated complete all as specified and directed by Engineer-in-Charge.

Supply and fix Heavy duty double pole garment rack with 1 Bottom shelves and side hook dress hanger stand of size 55x110x148cm complete all as specified and directed by Engineer-in-Charge.

Excavating in post holes ( or similar hoels ) each n exc 0.5 cum getting out, returining, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm , watering, and removing surplus soil to a distance n exc 50m complete all as specified and directed by Engineer-in-Charge.

M&L Plain cement concrete, 1:2:4, type B2, nominal mix (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed by Engineer-in-Charge.

S & F steel work in tubular trusses, posts including special shaped washer ect. complete using ERW or indluding butt welded tubes conforming to I.S.1161-1998 grade St-240 complete all as specified and directed by Engineer-in-Charge.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per Manufacturer instructions complete all as specified and directed by Engineer-in-Charge.

Excavating over areas, n exc 1.5 m deep and getting out in soft / loose soils complete all as specified and directed by Engineer-in-Charge.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 75mm plain Cement concrete type B- 2, 1:2:4 nominal mix (40mm graded aggregate) including formwork complete all as specified and directed by Engineer in Charge.

Material and Labour for Plain Cement Concrete type B-2, 1:2:4 nominal mix (20mm graded aggregate) Finishing cement concrete surface even and smooth Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green, including formwork, laid in panels with necessary expansion/dummy joint complete all as specified and directed by Engineer in Charge.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed inside MD land complete all as specified and directed by Engineer in Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out soft loose soil complete all as specified and directed by Engineer in Charge.

Material and Labour for Plain Cement concrete type D- 2, 1:4:8 nominal mix (40mm graded aggregate) in foundations, filling and mass concrete including formwork complete all as specified and directed by Engineer in Charge.

Material and labour for precast cement concrete in1:2:4 type B1 ( 20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete with joints to match all as specified and as directed by Enggr-in-Charge.

M&L providing Plain Cement Concrete 1:2:4, type B1, nominal mix (using 20 mm graded aggregate) as in cills, steps, bands, copings, bed plates etc including necessary formwork complete all as specified and directed by Engineer in Charge.

M&L Rendering 15mm thick CM 1:4 on fair faces of brick work or concrete external surfaces complete all as specified and directed by Engineer in Charge.

M&L for preparation of new decorated wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed by Engineer in Charge.

Supply and fixing 12 mm thick tinted toughend glass, High quality and glazing exc 0.5 sq.m in each pane including CP fancy handle 300 mm on both sides of door, including necessary patch fittings, including aluminium frame and coloured etching glass with approved design/pattern,fixed as per Manufacturer's instruction complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats/Frames of area .exc 1.5 Sqmand not exe 4.00 sq.m with shutter (without taking off shutters from the frame) each complete all as specified and directed by Engineer-in-Charge.

M&L preparation of old decorated surfaces of walls, pilasters including cornices and applying one coat of Oil Bound Distemper ( washable) complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats/Frames of area n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) each complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made uPVC colour fixed/casement window closed shuitters (composites of profiles of 60mm x 58mm x 2mm)for outer frames for two or more cloased shutters capable of mounting single glazing systemstructurally reinforced with hot dip galvanized upto 50 microns of min thickness1.2mm prefabricated welded through fusion weldingthe window sash shall be fitted with 5mm thick teflon clear float glass of desired make duly fixed with EPDM weathering seal resistant accesories for casement window- friction stay hinges of stainless steel,per sash, handle with mazak alloy casting No.1 per sash, locking system suitably consealed 1 No., per sash with raiser edges for smooth operation and system is to be installed at site using anchor fasteners, silicon rubber sealent, easy glazing, deglazing at site etc., with templates for casement sizing complete for finished item of work complete all as specified and directed by Engineer-in-Charge. Make: SMP Magma/equivalent

Supply and fixing Providing and fixing factory made rigid uPVC approved coloures Door frame made of uPVC extruded sections having an overall dimensions as 110mm * 52mm with wall thickness 2mm, corners of door frame to be joined with galvanized brackets and stainless stell screws, joints mitred and Plastic welded. The hinge side vertical of frame reinf by galvanized MS tube of size 19 x 19mm and 1mm wall thickness and 3 Nos. of hinges fixed to frame completely as per direction of Engr in charge. Openable door made of multi chambered UPVC of approved coloured reniforced with Galvanized iron profile through the openable frame. Frame of 60mm x 38mm x 76mm with reinforcement of 1mm thickness and openable sash with overall size of 60mm x 76mm and reinforcement of 1.5mm thickness. Coextruded glazing bead for fixing of 6mm thick teflon clear float glass of desired make duly fixed with EPDM weathering seal resistant accessories including necessary etching of glass of approved logo and pattern all as directed. Wall thickness of frame and sash shall be 2mm complete as per directions of Engineer in charge. Make: SMP Magma/equivalent

M&L Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L preparation of new surfaces of walls and applying one coat of primer and two coats of oil bound distemper complete all as specified and directed by Engineer-in-Charge.

S&F 12mm thick toughened glass with handles, as in hinged doors, partitions automatic doors and similar work, including cutting to shape, drilling holes etc complete all as specified and directed by Engineer-in-Charge.

S&F in sheet glass 4mm thick plain ordinary quality and glazing with oil putty wooden beads as directed in squares n exc 0.50 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge.

M&L mirror polishing kota stone slab flooring complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment of any type/description from walls/ RCC surfaces/ ceiling/ chajjas/ roof projections etc with mechanical means/ grinder complete all as specified and directed by Engineer-in-Charge.

M&L for applying acrylic thick wall care putty on internal surfaces of walls/ ceilings/ soffits (thickness may vary from 1.5 to 2.5mm as reqd for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surfaces smooth and ready for recieving painting etc complete all as specified and directed by Engineer-in-Charge. Make of wall putty: JK Wall putty/ Birla wall care putty/ Bison wall putty. Note: (i) The prepared wall surface after wall putty, the contractor will inform to the GE as well as to the Engineer in charge for site inspection before applying further finishes. Please note that the further finishes work will start only after the approval of prepared surface from GE as well as to the Engineer in charge through site order.

M&L for preparation of surfaces and applying two coats of interior emulsion paint (light shade)@ 10 sq.m/litre/2 coats by using roller/brush to wall surface over & including a coat of interior wall primer @ 10 sqm/litre/1 coat as recommended as under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed by Engineer-in-Charge. Make of Interior wall primer: Aian/ Berger/ Nerolac (Best Quality) Make of Interior emulsion: Asian (Tractor)/ Berger (Bison) / Nerolac( Beauty Smooth)

Material and labour for complete removal of existing treatment of walls/pillars /cornices, including Washing, rubbing down including applying white cement based putty where required for filling to depressions to make the surface even and smooth by using sander machine (with provision of dust sucking) upto entire satisfaction of Engineer-in-charge, after preparing the surfaces applying two coats of weather proof exterior emulsion paint (weather coat Apex, 100% exterior grade), as per existing or as approved tint/colour complete all as specified and directed by Engineer-in-Charge.

M&L for 40mm thick Plain Cement Concrete 1:2:4, Type B1 (using 20 mm graded stone aggregate),as in flooring finishing cement concrete surface even and smooth without extra cement including formwork complete all as specified and directed by Engineer-in-Charge.

M&L for preparing Old Steel surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. Make : Asian/ Nerolac/ Berger

S&F sheet glass 4mm thick plain ordinary quality glass each pane exc 0.50 sqm fixed to suitable aluminium channel as cupboards with suitable rollers etc complete all as specified and directed by Engineer-in-Charge.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed by Engineer-in-Charge.

Dismantling AC corrugated or semicorrugated sheets in roof covering / wall cladding complete all as specified and directed by Engineer-in-Charge.

S& F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc fixed with L-type or J-type or cranked hook bolts in lieu of screw fixed upto 15m height complete all as specified and directed by Engineer-in-Charge.

M&L for Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 600mm dia stainless steel Air Ventilators fixed to roof all as directed upto 15m height complete all as specified and directed by Engineer-in-Charge.

Dismantling existing alumunium shutters with frames any any size and description complete all as specified and directed by Engineer-in-Charge.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge. Make : Diamond/ Nirali/ Neelkand

Demolition of cement concrete floors and pavings exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L for 25mm thick Plain Cement Concrete 1:2:4, Type B1 (using 20 mm graded stone aggregate),as in sub base including formwork complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Steel Shutters (W:300mm; H:700mm) : Providing & placing Godrej make (Symphony range) pre-coated shutters madeGalvanised sheet with zero spangels, components shall be powder coated with high quality powders like Dupont, KanasaiNerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min. Shutters to be at least 18mm thick inprofile made out of 0.6mm thick Galvanised steel sheet with Inner and Outer pannel . Each shutter shall be fixed to the wooden framework soft/Auto closing hinges as per requirement (Hettich make or equivalent) fixed with SS screws, nails etccomplete and these shutters are provided with an approved quality of Godrej 128 mm pitch handles. Finished componentsshall be tested for the critical quality parameters, Adhesion and impact test which enhances the life of Cupboards. Note: The unit shall be fixed to the floor/wall/slab using metal screws of appropriate size and rawl plugs .

Material and Labour for Steel Shutters (W:400mm; H:700mm) : Providing & placing Godrej make (Symphony range) pre-coated shutters made Galvanised sheet with zero spangels, components shall be powder coated with high quality powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min. Shutters to be at least 18mm thick in profile made out of 0.6mm thick Galvanised steel sheet with Inner and Outer pannel . Each shutter shall be fixed to the wooden framework soft/Auto closing hinges as per requirement (Hettich make or equivalent) fixed with SS screws, nails etc complete and these shutters are provided with an approved quality of Godrej 128 mm pitch handles. Finished components shall be tested for the critical quality parameters, Adhesion and impact test which enhances the life of Cupboards. The unit shall be fixed to the floor/wall/slab using metal screws of appropriate size and rawl plugs.

Material and Labour for Steel Shutters (W:450mm; H:700mm) : Providing & placing Godrej make (Symphony range) pre-coated shutters made Galvanised sheet with zero spangels, components shall be powder coated with high quality powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min. Shutters to be at least 18mm thick in profile made out of 0.6mm thick Galvanised steel sheet with Inner and Outer pannel . Each shutter shall be fixed to the wooden framework soft/Auto closing hinges as per requirement (Hettich make or equivalent) fixed with SS screws, nails etc complete and these shutters are provided with an approved quality of Godrej 128 mm pitch handles. Finished components shall be tested for the critical quality parameters, Adhesion and impact test which enhances the life of Cupboards. The unit shall be fixed to the floor/wall/slab using metal screws of appropriate size and rawl plugs .

Material and Labour for Floor Cresent Corner Unit (W:1000mm; H: 700mm) : Galvanised sheet with zero spangels, shall be powder coated with high quality powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min.Shutters to be at least 18mm thick in profile made out of 1.2mm thick Galvanised steel sheet . Each shutter shall be fixed to the framework/ hinges (Hettich approved make) i/c soft/Auto closing hinges as per requirement (Hettich make or equivalent) fixed with SS screws, nails etc complete and these shutters are provided with an approved quality of Godrej 128 mm pitch handles.Adhesion and impact test which enhances the life of kitchen. Shelves to be of galvanised steel sheet with thickness of 1.2 mm. Steel carcass and shutters shall have passed the test like Static Load test, Shelf deflection test. Modular kitchen accessories (Godrej or equivalent make, payment for which will be made separately) to be fixed in the drawer/Cabinet with suitable provision with panels of bottom and rear shelves with thickness of 0.6mm as per technical requirement.

Material and Labour for 3 Drawer Unit: (800mm W x 560mm D x 700mm H) Tranquil Pullout Unit (Steel)(175mm height - 02 No), & Plain drawer (350mm - 01 No) with required SS screws of suitable size moving on soft closing ) of approved make complete all as per manufacturer's specification and as directed by the Engr-in-Charge.

Material and Labour for 3 Drawer Unit: (500mm W x 560mm D x 700mm H) Tranquil Pullout Unit (Steel)(175mm height - 02 No), & Plain drawer (350mm - 01 No) with required SS screws of suitable size moving on soft closing ) of approved make complete all as per manufacturer's specification and as directed by the Engr-in-Charge

Material and Labour for Tranquil Pullout Unit 200 mm (Steel): (200mm W x 560mm D x 700mm H) Tranquil Pullout Unit 200 mm (Steel)fof suitable size moving on soft closing serene telescopic channels (02 Nos each basket) of approved make complete all as per manufacturer's specification and as directed by the Engr-in-Charge.

Material and Labour for Floor Plain Shelf Unit (W:400mm; H: 700mm) : Galvanised sheet with zero spangels, shall be powder coated with high quality powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min. . Shutters to be at least 18mm thick in profile made out of 1.2mm thick Galvanised steel sheet . Each shutter shall be fixed to the framework/ hinges (Hettich approved make) i/c soft/Auto closing hinges as per requirement (Hettich make or equivalent) fixed with SS screws, nails etc complete and these shutters are provided with an approved quality of Godrej 128 mm pitch handles.Adhesion and impact test which enhances the life of kitchen. Shelves to be of galvanised steel sheet with thickness of 1.2 mm. Steel carcass and shutters shall have passed the test like Static Load test, Shelf deflection test. Modular kitchen accessories (Godrej or equivalent make, payment for which will be made separately) to be fixed in the drawer/Cabinet with suitable provision with panels of bottom and rear shelves with thickness of 0.6mm as per technical requirement

Material and Labour for Top Unit (W: 800; H: 600 mm): Providing & placing factory made modular kitchen cabinets with openable shutters and having 0.6mm body panels & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels, components shall be powder coated with high quality powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min. All shelves shall be supported on approved quality SS pins and shall be adjustable for different heights as per requirements. Shutters to be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia. Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges (Hettich approved make) i/c soft/Auto closing hinges as per requirement(Hettich make or equivalent) fixed with SS screws , nails etc complete and these shutters are provided with an approved quality of Godrej Arc 128 mm pitch Handle. Finished components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of galvanised steel sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection test. The unit shall be hanged on to the wall using metal screws of appropriate size and rawl plugs. Only face area of openable shutter and drawer shall be measured for payment. Cabinet with depth of 310 mm. Top Unit (W: 600; H: 600 mm): Providing & placing factory made modular kitchen cabinets with openable shutters and drawer shall be measured for payment. Cabinet with depth of 310 mm.

Material and Labour for Top Unit (W: 600; H: 600 mm): Providing & placing factory made modular kitchen cabinets with openable shutters and having 0.6mm body panels & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels, components shall be powder coated with high quality powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min. All shelves shall be supported on approved quality SS pins and shall be adjustable for different heights as per requirements. Shutters to be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia. Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges (Hettich approved make) i/c soft/Auto closing hinges as per requirement(Hettich make or equivalent) fixed with SS screws , nails etc complete and these shutters are provided with an approved quality of Godrej Arc 128 mm pitch Handle. Finished components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of galvanised steel sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection test. The unit shall be hanged on to the wall using metal screws of appropriate size and rawl plugs. Only face area of openable shutter and drawer shall be measured for payment. Cabinet with depth of 310 mm.

Material and Labour for Top Unit (W: 300; H: 600 mm): Providing & placing factory made modular kitchen cabinets with openable shutters and having 0.6mm body panels & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels, components shall be powder coated with high quality powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min. All shelves shall be supported on approved quality SS pins and shall be adjustable for different heights as per requirements. Shutters to be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia. Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges (Hettich approved make) i/c soft/Auto closing hinges as per requirement(Hettich make or equivalent) fixed with SS screws , nails etc complete and these shutters are provided with an approved quality of Godrej Arc 128 mm pitch Handle. Finished components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of galvanised steel sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection test. The unit shall be hanged on to the wall using metal screws of appropriate size and rawl plugs. Only face area of openable shutter and drawer shall be measured for payment. Cabinet with depth of 310 mm

Material and Labour for Top Corner Unit (W: 710; H: 600 mm): Providing & placing factory made modular kitchen cabinets with openable shutters and having 0.6mm body panels & 1.2mm thick horizontal Frames of Galvanised sheet with zero spangels, components shall be powder coated with high quality powders like Dupont, Kanasai Nerolac with dry film thickness of 40 to 60 microns with pencil hardness of 2H Min. All shelves shall be supported on approved quality SS pins and shall be adjustable for different heights as per requirements. Shutters to be at least 18mm profile made out of at least 1.2mm thick in Galvanised steel. Shutters will be of steel solid facia. Each shutter shall be fixed to the framework/carcass using two numbers of best quality CED coated hinges (Hettich approved make) i/c soft/Auto closing hinges as per requirement(Hettich make or equivalent) fixed with SS screws , nails etc complete and these shutters are provided with an approved quality of Godrej Arc 128 mm pitch Handle. Finished components shall be tested for the critical quality parameter, Adhesion and impact test which enhances the life of kitchen. Shelves to be of galvanised steel sheet with thickness of 1.2 mm. Steel carcase and shutters shall have passed the test like Static Load test,Shelf deflection test. The unit shall be hanged on to the wall using metal screws of appropriate size and rawl plugs. Only face area of openable shutter and drawer shall be measured for payment. Cabinet with depth of 310 mm.

Material and Labour for WPVC panel for skirtings/ vertical surfaces up to150 mm height fixed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed by Engineer-in-Charge.

M&L Elegant tile made of perforated cement fiber composite 595x1195/295x1195/595x1195x5mm covered with absorptive microfiber coating on the front side and Acoustics fiber on the back side, water resistance, fire resistant absorption coefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and installed on & including T24 grid system of 0.6mm thick Main 'T; length minimum 3000mm, web minimum 35mm to be placed at 600 mm centre to centre and secondary cross 'T' of length 600mm web min 35mm inter locked, Wire support for Main T to be taken at every 1200mm length wise and 600 mm width wise, with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results complete all as specified and directed by Engineer-in-Charge.

S&F 25mm lnsulated PVC Wall Lining with fillets consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing complete all as specified and directed by Engineer-in-Charge.

M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 15 mm thick in two coats of 1st coat 10mm thick in CM 1:6, finishing coat 5 mm thick in CM 1:4 with and including at the rate of 200ml per bag finished even and smooth with out using extra cement complete all as specified and directed by Engineer-in-Charge. Note : Material Cost of Liquid water proofing compound shall deemed to be inclusive in this quoted rate.

Material and labour for preparation of new plastered surfaces of wall by sand papering or by any other means, preparing the surfaces smooth and after that applying three coats of lime white wash with using paint brush complete all as specified and directed by Engineer-in-Charge.

M&L Mild steel Plates of Fe 410 -W (Gde E- 250) quality A (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed by Engineer-in-Charge.

M&L Joist, channel, angle, or tee sections,Fe 410 -W (Gde E- 250) quality A , fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed by Engineer-in-Charge.

M&L Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil complete all as specified and directed by Engineer-in-Charge.

M&L for Pre-cast cement concrete block masonry of Type B1, 1:2:4 (20mm graded aggregate) with solid blocks set in CM 1:4, exc. 10 cm in width and setting in mortar, complete all as specified and directed by Engineer-in-Charge.

M&L Formwork to fair finished soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engineer-in-Charge.

M&L RCC type B1,1:2:4, Nominal mix (using 20mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge.

S&F TMT steel bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

S&F rotational moulded polyethylene water storage tanks 1000 litre capacity, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge.

S&F 25mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 25mm bore Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed by Engineer-in-Charge.

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.

S&F 15 mm bore CP Bib tap cast copper alloy fancy type crutch or butterfly handles screwed down for iron or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) bend without access door complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 100mm dia SS floor trap with grating incl jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick,watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

S&F Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. over and including 15 mm thick screed bed in Cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

M&L for framed work such as grill, grating, guard bars etc. Grade confirming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.

M&L Returning, filling in hard dense soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-Charge.

M&L Removing excavated material of hard dense soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for Sand filling under paver blocks including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

M&L for rubber mould machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness,M-35 Grade with grey cement and pigment complete all as specified and directed by Engineer-in-Charge.

Taking down unserviceable sub main wiring any description along with PVC conduit/Casing capping/wooden batten/metal conduit and made good the disturbed surface complete all as specified and directed by Engineer-in-Charge.

Taking down unserviceable DBs and metal clad boxes any description or size/way including MCCB/MCBs complete all as specified and directed by Engineer-in-Charge.

Taking down old aluminium point wiring (light, fan, socket or power) complete fittings such as switches,sockets,ceiling rose, pendents, regulators etc complete as ordered and removing retrived materials and making good the disturbed surface of wall, floors, ceiling etc complete all as specified and directed by Engineer-in-Charge.

M/L for point wiring for One fan/light point controlled by one switch concealed type with 1.5 sqmm PVC FRLS insulated,unsheathed 1100 volts grade copper conductor single core multi stranded drawn through with and including non metallic rigid PVC rigid conduit not less than 20 mm dia with its accessories concealed on walls, suface on ceiling etc., with suitable clamps/ shaddles, including provision of suitable 1.6 mm thick MS pressed steel terminal boxes concealed suitable to modular sockets/switches including modular cover frame and plate in wall for housing of modular switiches, sockets, fan regulators etc., including one run of 1.50 sqmm PVC insulated copper conductor for continious earth wire and connected to common earth dolly complete all as specified and directed by Engineer-in-Charge.

All as per item No.123 but for One 3pin socket outlet 6amps point on Independent board

All as per item No.123 but for One 3pin socket outlet amps point on same board with other switches

All as per item No.123 above but with 2.5 sqmm for power point 15 amps.

All as per item No.123 above but with 4.0 sqmm for AC point socket outlet 15 amps.

S&F Modular Switch flush type, 6 amps 240 volts single pole one way complete all as specified and directed by Engineer-in-Charge.

S&F Modular Switch flush type, 16 amps 240 volts single pole one way complete all as specified and directed by Engineer-in-Charge.

S&F Ceiling rose surface PVC insulated three plates "JUMBO' type 240 volts complete all as specified and directed by Engineer-in-Charge.

S&F Modular socket outlet 2/3 pin 6 amps 240 volts flush type. Two module complete all as specified and directed by Engineer-in-Charge.

S&F Modular socket out let 6/16 Amp 6pin flush type Two module complete all as specified and directed by Engineer-in-Charge.

S&F Modular Fan regulator electronic type with 5 step control suitable for 1200/1400 mm ceiling fan complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of Wall mounted light fitting LED batten including tube rod, extruded aluminium heat sink provided for effcient heat dissipation & integrated electronic driver with 20 W LED (4 feet) lamp including disconecting, removing, and connecting into electric circuit and testing complete all as specified and directed by Engineer-in-Charge. Make: Havells/ Bajaj/Philips

Cutting chases, pinning in making good to facings where required and pointing in cement motor 1:3 to ends or edges of landings steps, chills, sunshades, shelves, lintels etc and cutting chases for concealed conduit wiring etc and making good cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and directed by Engineer-in-Charge.

M&L for sub main wiring two run of 6 sqmm single core PVC FRLS insulated unsheathed cable single core multistranded copper conductor 1100 volts grade drawn through suitable size of PVC conduit and conduit accessories concealed on floor/wall/ surface on ceiling with suitable clamps/saddles including one run of 6 sqmm PVC insulated FRLS copper cable for continuous earth conductor connected to common earth dolly complete all as specified and directed by Engineer-in-Charge. Note : (i) Necessary cutting chases, pinning in brick wall for concealed wiring shall be measured and paid separately. (ii) Two runs of 6sqmm cable, one run of earth cable and one run of PVC conduit shall be deemed to be considered as one unit run.

Supply & fixing of Sheet metal enclosure with distribution board Double Door 230 volts SPN 8 way with suitable Bus bar and provision for MCBs/ isolators fixed on wall and connecting with all connections complete all as specified and directed by Engineer-in-Charge.

S & F MCB's 6-32/40 amps, breaking capacity 10 KA , SP 240V complete all as specified and directed by Engineer-in-Charge. Make : Havells or Equivalent

S & F MCB's B curve SPN 6-32/40 Amps, breaking capacity 10 KA , 240V complete all as specified and directed by Engineer-in-Charge.

Supply and fix wall mounted fan 450 mm sweep esteem type along with speed control complete with all accessories including mounting fabricated MS flat and anchor fastner nuts and bolts all as per design/pattern provided/ approved by Engr-in-Charge. Make: Havells/Bajaj

M & L for painting of ceiling fan/exhaust fan any sweep, complete in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc including writing MES No in appropriate format complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of Wall mounted light fitting LED batten, extruded aluminium heat sink provided for effcient heat dissipation & integrated electronic driver with 22 W LED (4 ft) lamp including disconecting, removing, and connecting into electric circuit and testing complete all as specified and directed by Engineer-in-Charge. Make - Havells or equivelant

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer-in-Charge.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete one single pole MCB 20/30 Amps, 240V complete concealed on wall and connecting with all connections complete all as specified and directed by Engineer-in-Charge.

Supply & fixing of Sheet metal enclosure with distribution board Double Door 230 volts SPN 12 way with suitable Bus bar and provision for MCBs/ isolators fixed on wall and connecting with all connections complete all as specified and directed by Engineer-in-Charge.

S&F PVC non metallic rigid conduit not less than 20 mm dia with its conduit accessories concealed on floor/wall/ surface on ceiling with suitable clamps/saddles rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed by Engineer-in-Charge.

Taking down Split AC up to 2.0 ton complete with indoor & out door units and deposit to E/M store for safe custody including electrical connections complete all as specified and directed by Engineer-in-Charge.

M&L for refixing the split AC up to 2.0 ton colecting from E/M store after completed the B/R work including necessary servicing, gas top up & replacement of minor spares if required complete all as specified and directed by Engineer-in-Charge.

Supply and install hi wall split units 2.0 TR indoor/outdoor complete with cordless remote control unit and with in built air ioniser for better indoor air quality with minimum 5 star rating inverter type and R-32 6200 watts,BLDC Compressor,Anti bacterial filter,dust filter,copper condensing coil,BERE:ISEER: 5.0w/w complete all as specified and as directed. Make: Votas/Carrier/Daikin Note:- Contractor shall need to give 5 (FIVE) years guarantee on compressor & PCB Board from the certified date of completion and in this regard, a guarantee bond in non judicial Rs 100/- stamp paper as per format available in Particular specification shall be submitted by the contractor.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 0 .5 KVA complete all as specified and directed by Engineer-in-Charge.

Refixing of LED/CFL light fittings any type including treplace the necessary connections complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of Fire alarm control panel complying with BS EN 54 Single loop panel of capacity from 99 detectors & 99 modules upto 200 detector and modules complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of addressable type MCP WITH Back box including all fixing Accessories complete all as specified and directed by Engineer-in-Charge.

Supply and fixing addressable smoke detectors with back box including all fixing accessories complete all as specified and directed by Engineer-in-Charge.

Supply and fix Addressable type Hooter with all fixing accessories complete all as specified and directed by Engineer-in-Charge.

Supply and Laying on wall /floor/roof 2 core 1.5 Sqmm copper armoured cable complete all as specified and directed by Engineer-in-Charge.

Supply and fix AC Manager Single phase complete all as specified and directed by Engineer-in-Charge.

M/s KM Marimuthu Achary (BID ID -3390825)