Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.4 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹14.9 L+₹22,939.50 (1.57%)Rejected-AOC | L2 | Rejected-AOC Not Being L1 | |
| 3 | L3₹14.9 L+₹23,468.50 (1.60%)Rejected-AOC OLD NO 191 NEW NO 616 M T H ROAD PATTABIRAM CHENNAI 600 072 | CHENNAI | CHENNAI | TAMIL NADU | 600072 | L3 | Rejected-AOC Not Being L1 | |
| 4 | L4₹17.1 L+₹2.5 L (16.9%)Rejected-AOC NO 3 PERIYAR STREET ANAIKATTUCHERI PATTABIRAM CHENNAI 600 072 | CHENNAI | THIRUVALLUR | TAMIL NADU | 600072 | L4 | Rejected-AOC Not Being L1 | |
| 5 | L5₹17.1 L+₹2.5 L (17.0%)Rejected-AOC | L5 | Rejected-AOC Not Being L1 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
12 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Avadi
Garrison Engineer, Muthapudupet, Avadi, Chennai
REPAIRS TO ROOF, BRICK WORK AND PLASTERING INCL MISC AND CERTAIN REPAIR TO VARIOUS BLDG IN ARMY AREA AND OD TECH AREA UNDER GE AVADI
2024_MES_636917_1
8172
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer, Muthapudupet, Avadi, Chennai
Please refer tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer, Avadi
₹40,000
Yes
21 Mar 2024
11 Jan 2024
20 Feb 2024
11 Jan 2024
12 Feb 2024
27 Jan 2024
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing) and rubbish off the premises complete all as specified and as directed.
Demolition of cement conctrete (un-reinfoeced) of any description and in any position not otherwise specifically provided all as directed.
Demolition of stone slabs and tiles of any descreption or thickness in floors, aprons laid dry or laid dry and pointed completed all as specified and directed.
M&L for Glazed ceramic coloured tiles size 300x200mm x 6 to 7mm thick, as in vertical surfaces such as in skirting and dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick back coat in CM 1:3, complete all as specified and directed.
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.
S&F 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) screed bed, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.
M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection, surfaces finished even and fair without using extra cement, complete all as specified and as directed.
S&F in repairs Tubular towel rail, brass chromium plated 20mm dia D type, 60cm long between flanges, complete all as specified and directed.
Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.
M&L Brickwork with fly ash Old size bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed
M&L Rendering 15mm thick in CM 1:6 on other than fair faces of brick work or stone masonry surfaces, even and smooth without using extra cement , complete all as specified.
S&F15mm bore Bib taps, cast copper alloy chromium plated with crutch or butter-fly handle screwed down, screwed for iron pipe or for brass ferrules, complete all as specified and directed.
Taking down chowkats or frames not exc 1.5Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.
M&L for forming jambs etc to openings (to forgoing items) incl cutting , toothing and properly bonding into old work also facing, jointing and pointing to match existing work in Cement mortar 1:6 complete all as specified.
S & F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
Supply and fix in repairs to stainless steel wire cloth 0.36mm, nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.
S&F 4mm thick figured glass pin headed type and glazing with oil putty in squares not exc 0.5 sqm in each pane all as specified.
Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes for the tanks of capacity exc 500 litres and not exc 1000 litres and writing date of cleaning in synthetic enamel paint .
S&F in repair bib taps 15mm bore standard of PTMT (minimum wt 90 gms) any colour high pressure screwed for iron pipe and fixed all as specified
S&F in repairs only brass chromium plated Health Faucet with 1mtr Flexible tube & Hook complete all as specified and directed.
Taking down chowkats or frames exc 1.5Sqm and not exc. 4Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the 19mm MS square tube and suitably screwed complete all as specified and as directed.
S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick(styles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on backface, supplying and fixing in frame at site as per specification complete all as specified and as directed.
S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 all as specified.
S&F 100mm long Aluminium handles, cast type, anodised, all as specified and directed.
S&F for 125mm length aluminum, anodised, barrel tower bolts of extruded section and fixed all as specified.
Dismantling plain /corrugated steel sheeting any gauge, any thickness in roof covering, valley gutters or wall cladding etc complete all as specified and as directed.
Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings all as specified and as directed.
M&L for 6mm thick non-asbestos fibre cement corrugated or semi corrugated sheets in roofs fixed with 'J' type hooks etc complete all as specified and as directed
All as per item no-31.00 described here in before, but except sheet. Note:- Non-asbestos fibre cement sheets obtained from srl item No 30 shall be reused
M&L for non-asbestos fibre cement two piece adjustabal plain wing ridge 6mm thick with 'J' type hooks complete all as specified and as directed
Dismantling wrought iron work or mild steel of any description not otherwise provided for all as specified and as directed.
S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc conforming to Fe-250 all as specified.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed wih self tapping screws as specified
All as per item No. 36 but fixing only corrugated galvalume sheet obtained from Sl item No 29 here-in-before complete all as specified and directed
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding, valley gutters, fixed wih self tapping screws as specified
All as per item No. 38 but fixing only corrugated galvalume sheet obtained from Sl item No 29 here-in-before complete all as specified and directed
S&F 0.63mm thick black, corrugated Galvanised Iron mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed.
S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges,hips,valley gutters, drip and straight flashings (length and girth fixed) with grade of zinc coating 275 all as specified.
All as per item No. 41 but fixing only corrugated plain mild sheet 0.5 mm thick, obtained from Sl item No 29 complete all as specified and directed
S&F 2 mm thick clear embossed/opal white polycarbonate sheet with UV stabliser having atleast 60-80% transparancy as per relevant IS including fixing side and lapse with seal cover complete all as directed
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)
S&F PVC 110 mm bore rain water pipes confirming to IS 13592 type 'B' including necessary rubber ring joints including MS flat iron clamps of size 25mm x 3mm @ 1.2 m c/c for each pipes all as specified.
PVC (SWR) 110 mm bore bends any radius all as specified and as directed.
Dismantling of ceiling board of any thickness. Including frame work all as specified and as directed.
M & L of aluminium snap false ceiling of panels of size 605 x 605mm using aluminium anodised wall angle of size 25 x 25 x 1.50mm thick fixed to walls with rawl plug and screws n. exc 1.50m c/c and intermediate panels using main "Tee" and cross "Tee" aluminium anodised section of size 35 x 25 x 1.50mm and 25 x 25 x 1.50mm thick suspended with and including 2mm dia GI wire n. exc 1.2m c / c including 8mm thick semi perforated particle board in ceiling with two coat of synthetic enamel paint over a coat of pink primer surfaces of any description, not otherwise, described, over 10cm width or girth.
S&F for 1mm thick lath steel rolling shutters without ball bearing including top cover anchoring rod hasp and staple and one shop coat of primer erected in position as indicated complete push pull or manual type, complete all as specified and as directed
Servicing of steel rolling shutters of area exc 10 Sqm but n.exc 25sqm ( single opening) gear operated by rectification of minor defects, overhauling, greasing lubricant of guid rails and refixing clamps riveting including necessary repairs to the locking arrangements and replacement of worn-out spare parts such as gear/worm/interlocking lath/ball bearing in order to bring the rolling shutters to easy operation and smooth functioning complete all as specified and as directed. Note:- Cost of gear/worm/interlocking lath/ball bearing will be measured and paid as supply only under respective items.
Servicing of steel rolling shutters of area exc 25 Sqm but n.exc 30sqm ( single opening) gear operated by rectification of minor defects, overhauling, greasing lubricant of guid rails and refixing clamps riveting including necessary repairs to the locking arrangements and replacement of worn-out spare parts such as gear/worm/interlocking lath/ball bearing in order to bring the rolling shutters to easy operation and smooth functioning complete all as specified and as directed. Note:- Cost of gear/worm/interlocking lath/ball bearing will be measured and paid as supply only under respective items.
Supply only gear/worm (machine cut) including connecting mechanical device complete all as specified.
Supply only interlocking lath sections made out of cold rolled steel strips of 1.2mm thick and 75mm width complete all as specified and directed.
M & L for Preparation of new steel surfaces over 10cm width or girth and priming with red oxide primer and painting with synthetic enamel painting two coats all as specified.
SUNLEY CONSTRUCTIONS
SUBAMAGENCYANDCONSTRUCTION
Shri Varaghaa
M/s Omm Muruga Enterprises
S K ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .