SPECIAL REPAIR TO DRAIN AND PROVN OF OVERHEAD SHED FOR REPAIR BAY

Amount

Excavating over areas not exc 1.5m deep & getting out in soft / loose soil complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers not exc. 15 cm thick spread, levelled & rammed including watering complete all as specified and directed.

Removing excavated materials (soil) to a distance not exc.50 m and deposting where directed, at a level not exc. 1.5m above the starting point complete all as specified and directed

M&L for hardcore of broken stone/boulders gauge not exc. 63mm, deposited, spread & levelled in layers not exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.

M&L for 100 mm thick PCC 1:3:6, type C-2 (using 40mm graded stone aggregates) complete all as specified and directed.

S&F pre-painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws complete all as specified & directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws complete all as specified & directed.

S&F steel work in tubular trusses/purlins/posts (of round/ rectangular/square hollow section) including angle cleats for joining with welding complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with bolted or welded attachment complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 10cm but n exc 15cm long dia of shank 16 to 20 mm complete all as specified and directed.

M&L for two coats of synthetic enamelled paint over a coat of red oxide primer over exc 10 cm width or girth including preparation of new steel surfaces complete all as specified and directed..

M&L for machine pressed precast concrete interlocking paver block glossy finished chemically treated any shape and size confirming to IS-15658-2006 size of 80 mm thickness, M-35 Grade with grey cement and pigment laid over and including 30mm to 50mm stone dust cushioning complete all as specified and directed.

M&L for PCC 1:2:4, type B0 ( using 12.5 mm graded stone aggregates) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and incl. necessary form work complete all as specified and directed.

S&F mild steel for wind ties for roof including securing bolts, posts including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed..

Demolition of cement concrete in ground floors and pavings not exc 15cm below or above ground floor complete all as specified and directed..

M&L for RCC design mix M25 (using 20 mm graded stone aggregates) as in Foundations, including rafts, footings, foundation beams, plinth beams, etc complete all as specified and directed..

M&L for RCC design mix M25 (using 20 mm graded stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter rough finished surfaces of concrete flat complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers,columns, and stanchions rough finished surfaces of concrete Square, rectangular or polygonal complete all as specified and directed..

M&L for brickwork with subclass 'B' old size bricks, straright or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed..

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:4 on brick wall / concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed..

Demolition of RCC in precast cover slab any thicknes (reinforced) complete all as specified and directed..

M&L for walling of random rubble, brought up to course well bounded bedded and solidly hearted built in CM 1:4 complete all as specified and directed.

All as per Srl item No 28 as above but except stone Note:- Serviceable stones obtained from Srl item No.26 shall be re-used in this item

M&L for PCC (1:3:6) type C1 using 20mm graded stone aggregate as in coping and the like including weathering , slightly rounded or chamfered angle with and incl necessary use and waste of form work complete all as specified and directed .

M&L for rendering 15mm thick in CM (1:4) on random rubble stone masonry complete all as specified and directed ..

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in benching of drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitered /stopped ends complete all as specified and directed

Add or deduct for each 25mm girth or part there of over or under 30 cm complete all as specified and directed.

M&L for precast RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregates) as in drain cover with plain fair faces including necessary formwork, chambers, wathering, throating etc and setting in CM (1:4) complete all as specified and directed

M&L for reinforced concrete pipes 300 mm bore, class NP2, laid & jointed complete with Socket and spigot joints including demolition & breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in CM of 300 bore pipe complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length fixed in masonry drain for weepholes complete all as specified and directed

M&L for surface conduit point wiring for the following on brick wall with 2.5 Sqmm PVC-FR insulated, sheathed, copper conductor, stranded 1100 volt grade cable drawn in & including PVC conduit of 20mm bore (external), including modular metal flush boxes & modular white cover plate with frame as per site requirement with all fittings such as tees, bends, elbows, etc. all as per site requirements and PVC insulated & sheathed 1100 volt grade copper conductor, stranded 2.5 sqmm cable as continuous earth lead complete all as specified and directed:-

For one light, fan point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.38 here in before but for power point wiring using with 4 sqmm PVC-FR insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 4 sqmm PVC insulated, sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead -ditto-

S&F modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed .

S&F socket modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed.

S&F switch modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and as directed.

S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed.

S&F ceiling rose, surface backlit,three terminal complete all as specified and as directed.

S&F testing and commissioning of MCB SP 6-40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and as directed.

All as per Srl item No.08 above but but SPN 40 - 63 Amps, 240 V

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 12 way, 240 V with 200 Amps rated bus bar complete all as specified and directed

S&F high power LEDs exlusive innovative die cast aluminium IP-66 flood light with high power LED 150 watt including bracket, clamp, nut and bolt complete all as specified and directed

S&F air circulator fans 230 volts single phase oscillation 450mm sweep suitable for wall mounting complete all as specified and directed Make- Bajaj/Havells/Usha

M&L for provn of earthing complete with MS galvanized earth plate electrode 600x600x6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below normal GL) with top edge of plate not less than 1.5 M below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of CI or steel incl excavation, PCC (1:3:6) type C-1 chamber with CI cover 10 mm thick, 15 mm dia light grade , GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia, medium grade, lugs, main earthing lead upto main switch/DB incl charcoal dust, salt etc all as shown in electrical plate No. 3 of SSR part-I 2009 specification.

Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 16 sqmm 2 core complete all as specified and directed

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for laying of cable as the case may be and getting out in any type of soil complete all as specified and directed.

M&L for sand cushioning in trenches for the cable complete all as specified and directed. Note:- Punned thickness shall be measured and paid

Returning filling, spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed

Removing excavated surplus material not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr from starting point complete all as specified and directed.

M&L for kiln burnt bricks of sub class 'B' laid in trenches for cable protection complete all as specified and directed

S&F GI Pipe light grade 50 mm dia ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed

siddhant construction

M/s VIKAS TRADERS

M/S SHIVA TRADERS

anil kumar sahu

m/s mohansingh