Maintenance work

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.

500 litres capacity

Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - Internal water supply above ground level.

32mm dia UPVC Pipe

25mm dia UPVC Pipe

20mm dia UPVC Pipe

Supplying and fixing UPVC Specials in water supply arrangements (both in internal and external water supply arrangements.

32mm dia Coupler

25mm dia Coupler

20mm dia Coupler

32mm dia Elbow

25mm dia Elbow

20mm dia Elbow

32mm dia Bend

25mm dia Bend

20mm dia Bend

Supplying and fixing in position first quality and approved variety of UPVC Ball Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

32mm dia UPVC Ball Valve

25mm dia UPVC Ball Valve

20mm dia UPVC Ball Valve

Supplying and fixing in position best quality approved make SS Sink of size 1200 x 550 x 180mm including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works]

Supplying and fixing position CI Nahani Trap / Floor Trap of the size 100x75mm with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Renewing and refixing in position of 32mm dia waste hose is approved quality including cost of materials etc., complete and as directed by the departmental officers.

Supplying and fixing with new mild steel hollow pipes/ purlins / Hollow section M.S. Posts/ M.S. Pipes of approved quality and brand including labour charges for cutting and welding with required size an complete complying with standard specification and as directed by the departmental officers

Supplying, fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers.

Renewing and refixing in position of SS heavy duty Long body tap of approved quality make to IS Specification (Gross weight shall not be less than 400grams) and quality including cost of shellac, thread etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing of Water Dispenser with MS Stand (Storage Capacity (L): 80, Storage Capacity Cold:65, Storage Capcity Ambient: 15, Storage Capacity Hot:2, Dimension (WxDxH)mm : 600x575x1575, Make: Bluestar Total running Current (A): 7.5, Total Power (W): 1575, Thermal Insulation per tank: PUF, No.of Faucets (Cold/Hot/Plain): 1/1/1, Outer Body materials: Pre painted sheet, Refrigerant : R 134 a type of installation: Indoor, Top lid Type : Hingedas directed by departmental officers.

Supplying and fixing of Over head PVC tank of required size and shape including labour charges etc., complete and as directed by the departmental officers.

Please Enable Macros to View BoQ information