PROVN OF GI SHEETS FOR ROOF WITH PROVISIONING OF VALLEY GUTTER AND GLASSES WITH CONNECTED ITEMS IN CERTAIN BUILDING IN ABW UNDER GE NORTH DELHI CANTT10

Amount

Hacking out old broken glass (any thickness, size , quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips, nut bolts & fillets at height upto 15 metres, complete all as specified and directed.

S&F Rough cast, wired fibre glass sheet exc 6mm thick but n.exc 6.40mm thick fixed with flat iron and nut bolts in squre/rectangle & as required exc 0.75sqm but n.exc 1.00sqm in each pane fixed with necessary securing arragement as previous at height upto 15m, complete all as specified and direccted.

S&F Sheet glass ordinary quality, 4 mm thick and glazing with oil putty in square n.exc. 0.5 Sqm in each pane at height upto 15 metres, complete all as specified and directed.

Dismantling of AC sheet (corrugated/semi corrugated etc) in roof or wall of any description including false ceiling below roof sheet etc at height upto 15 metres, complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/SDS any dia suitable for up to 10mm thick steel structure at height upto 15 metres, complete all as specified and directed.

S&F Fibre glass reinforced translucent corrugated sheeting 3mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and directed.

Dismantling of plain or, corrugated/semi corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof coverings single or double layer fixed independently to with roof structures including ridges/valley gutters including removal of silt, mud etc at height upto 15 metres, complete all as specified and directed.

S&F 5.00 mm thick FRP sheet in velley gutter, dripper, Rain water pipe of any dia straight/curved, flushing with required overlap made to required shape and size including complete jointing/sealing with new/existing sheet or member of any material and fixed in position at height upto 15 mtr, complete all as specified and directed. Note : Contractor will produce one sample of each valley/ gutter, ridge and drain pipe for approval from GE, prior its execution of the work at site.

S&F 2.00 mm thick PGI Sheet having 275 mm of zinc coating per sqm (both side) in velley gutter, sliding gate, dripper, Rain water pipe of any dia straight/curved, flushing with 100mm overlap made to required shape including welding or revetting and fixed in position at height upto 15 mtr, complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa moulded type as in ridge, roof/wall covering /cladding to wall, fixed with self tapping screws/SDS any dia suitable moulding as directed working height up to 10mm thick steel structure at height upto 15 metres, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fitting, head, shoes, bend, swan-nacks etc., including cleaning or refixing or removal to store at working height up to 15m, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for at height up to 15 mtrs, complete all as specified and directed.

S&F Mild steel work as in bands, straps, supports or stays for rain water, vantilating pipes including bolts, if required, bolt hooks (stay), heavy for large gates; hook and pintle hinges; large hasp and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles, conforming to Fe-290 grade-E-165 at any height up to 15 metres, complete all as specified & directed.

S&F Structural steel work for rolled sections as in main and cross beams, hips and jack rafters, purlins, running rails and guides for sliding doors, window etc fixed with angles and angle cleats or other connecting plates Gde Fe-410-W at any height up to 15 metres, complete all as specified and directed.

Supply only Steel wheel/Pully suitable for sliding steel gate / shutters on top or bottom rail including bush or ball bearing and all consumable items for making operational, complete all as specified and directed.

M&L for preparation of new steel and iron surfaces any description over 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of old decorated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint upto 15 metre height, complete all as specified & directed.

M&L for preparation of new steel surfaces, priming with aluminium red oxide primer and applying two coats of aluminium paint upto 15 metre height, complete all as specified and directed.

Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles working height upto 15 metres, complete all as specified and directed.

Material and labour for Brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 working height up to 15 metres, complete all as specified and directed.

All as per Srl item No. 20 above but except bricks.

M&l for hard core of gauge exc 63mm but n exc 100mm using broken stone or boulders, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface, complete all as specified & directed.

Demolition of cement concrete (un-reinforced or reinforced ) in ground floors and pavings n. exc. 15cm thickness (below or above ground level), complete all as specified & directed.

M&L for PQC work in pavment/ hard standing with minimum flexural strength of 4.5 MPa using minimum cement content of 360 Kg per cubic metre including design mix from laboratory, trial mix at site, construction of trial bay of 3.5m x 3.5m at site (before commencement of PQC for the main work), carrying out quality control tests and all activities as per relevant IS code/IRC, laid with mechanical paver as specified and consolidated in bays to required gradient and camber including necessary steel form work and mixed with synthetic fibre reinforcement as per manufacturer's instructions, laid in panels, spread and compacted, mechanically vibrated and bull nosing / rounding off the edges, including curing compound, finishing the surface by belting and brooming without using extra cement etc.,complete all as specified and directed.

Notes : (a) Flexural strength shall be established by beam test and design mix formula should be compatible to IRC-44-2017, IS-456. (b) Curing compound shall be applied at the paving stage after broom finish and surface is dry. (c) No deduction shall be made from concrete for space occupied by construction and dummy joint. However, deduction shall be made for the space occupied by expansion joints. (d) Cost of all requisite/specified items, any admixtures required to achieve the desired properties of concrete shall be deemed to be included in the unit rate quoted for PQC and nothing extra shall be paid on this account. (e) No price adjustment shall be applicable if excess quantity of cement content used in the work as approved in the Design Mix exceeds 360 Kg. (f) The rate quoted shall be inclusive of use and waste of form work for total thickness. (g) Surface shall be finished by traverse brooming of maximum 1.5 mm deep. Brooming shall be done through an approved manner and as directed by Engineer-in-Charge and rate is included in quoted rate.

M&L for forming 12-15 mm thick up to 100mm depth expansion joints in new or old concrete mechanically, cleaned it and filled with pre-formed bituminous filler and tip 30mm primed and sealed with sealing compound, Grade 'B', complete all as specified and directed.

M&L for forming contraction (Dummy joints 20mm deep x 10mm wide by mechanical means in new or old concretd and filled with sealing compound grade 'B', complete all as specified and directed.

M&L for forming Construction joint 30mm deep x 10 mm wide filled with sealing compound grade 'B', complete all as specified and directed.

M&L for complete removal of existing treatment from old decorated plastered surfaces of walls, preparation of surface and filling the gaps with putty if any and applying two coats of cement base paint over a coat of primer upto 15 metre height, complete all as specified and directed.

M&L for complete removal of existing treatment from old decorated plastered surfaces of walls, preparation of surface and filling the gaps with putty if any and applying two coats of oil bound distemper over a coat of primer upto 15 metre height, complete all as specified and directed.

M&L for complete removal of existing treatment from old decorated plastered surfaces of ceiling, preparation of surface and filling the gaps with putty if any and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.

Taking down rolling sliding shutter area exc 10 sqm and nexc 27 sqm of any type, complete all as specified and directed.

S&F Steel rolling shutters, gear operated type with bevel gear box and crank handle without ball bearing as specified including top covers anchoring rod, hasp & staple and one shop coat of red oxide primer and errected in position complete thickness of laths 1.25mm complete all as specified and directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters, complete all as specified and directed.

Supply only mild steel helical wire spring 45cm long , 75 mm dia and weighting of each spring not less than 3.00 kg, complete all as specified and directed

S&F Ball bearing for rolling shutters make as approved, complete all as specified and directed.

Taking down cement plaster of any description & thickness from brick/concrete sufaces of wall/ceiling etc including racking out joints, hacking for keys scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick (in two layers (10mm+5mm) on brick work or concrete surface in cement mortar 1:4 including water proofing compound in outer layer finished even and smooth without using extra cement, complete all as specified and directed.

M&L preparation of newly plastered surface on walls and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

S&F with complete installation of wind operator turbo air ventilator of size 600mm dia made of stain less steel sheet including dual ball bearing fixed over assembly made of polycarbonate transparant sheet of size 5.5 x 3.5 feet on roof of steel structure shed working height up to 15 meter, complete all as specified and directed.

M&L for cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 50 mm thick laid in slope fini shed even and fair without using extra cement incl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight including necessary form work, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for providing 25 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregates as in leveling course of floor rough surface to receive floor tiles, complete all as specified and directed.

M&L for double charged vitrified ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.0 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over screed bed or bedding layers of cement mortars 15 mm thick in cement mortar 1:4, complete all as specified and directed.

All as per Srl item No. 45 above but as in vertical surfaces such as skirting/ dado over and including 10 mm thick rendering in cement mortar 1:3.

M&l for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work icluding for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc.conforming to Fe.290.Gde-E-165, complete all as specified and directed

Dismantling expanded metal, any thickness or mesh, n. exc 4.00 Kg per sqm and fixed with steel or wood frame and fillets, complete all as specified and directed.

S&F of expanded metal mesh, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members at height up to 15 metres, weight n. exc. 4.00 kg, complete all as specified and directed.

Description of Work / Item(s)

Amount

Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing, complete all as specified and directed.

M&L for point wiring with 1.5 Sq.mm (nominal size) single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLSH electrolytic copper conductor cable confirming to IS 694:2010 with and including continuous earth wire of size 1.5 Sqmm (nominal size) single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH electrolytic copper conductor cable and connected to earth dolly, colour coded as per IS 11353: 1985 drawan through and including rigid non-metallic PVC concealed conduit of 20mm dia (Nominal bore) or higher, medium grade confirming to IS 9537(Part 3): 1983 complete with and including all PVC conduit accessories and factory made not less than 1.2 mm thick sunken modular flush sheet galvanised metal enclosure having zinc coating not less than 120 GSM confirming to IS 14772 : 2000 having op, bottom, side and back-wall knockouts for conduit entry from any direction, suitable modular cover plate with frame and making good of disturbed surfaces of wall/ceiling/floor etc complete all as specified in IS 732: 2019 and directed by Engr-in-Charge, for One light / bell point controlled by one, one way switch 06 Amps, complete all as specified and directed.

All as per item Srl item No.2 above but for one fan point controlled by one, one way switch 06 Amps.

All as per item Srl item No.2 here-in-before but for one 3 pin, 06 Amps socket outlet point on independent board but not below the switch board of light points in the same vertical plane controlled by one, one way 06 Amps switch.

All as per item Srl item No.2 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch.

All as per item Srl item No.2 here-in-before but point wiring with 4 Sqmm (Nominal size) single core FRLSH cables and earth continuity wire of 4 Sq mm (Nominal size) single core FRLSH cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

S&F modular switch, 06 Amps, single pole, one way, 230 volts, one module and IP 20 protection, complete all as specified & directed Make: Legrand Cat Part No 573400, Schneider Cat Part No X1001WH, Wipro Cat Part No RF110

S&F modular switch, with indicator, 16 Amps, single pole, one way, 230 volts, complete all as specified and directed. Make: Legrand Cat Part No 573410, Schneider Cat Part No X1101WH, Wipro Cat Part No RF130

S&F modular socket outlet 03 Pin, 06 Amps, 02 module with shutter, complete all as specified and directed. Make: Legrand Cat Part No 573424, Schneider Cat Part No X2005WHNS, Wipro Cat Part No R1212

S&F modular socket outlet 02 in 01, 03 pin, 6/16 Amps, 02 module with shutter, complete all as specified and directed. Make: Legrand Cat Part No 573471, Schneider Cat Part No X2106WH, Wipro Cat Part No R1332P

S&F ceiling rose, 6 Amps, 250 volts, AC, with three equal size terminals, complete all as specified and directed.

S&F surface/wall mounting LED batten luminaire with following specifications complete all as specified and directed. :- (a) System Power : 20W (b) Length : 4ft (c) Housing : Epoxy powder coated white extruded aluminium channel (d) Diffuser : Milky white Polycarbonate (e) Rated Voltage : 240V (f) Safe operating Voltage : 140V to 270V (g) Rated Frequecy : 50 Hz (h) Power Factor : ≥ 0.95 (j) THD : ≤ 10 (k) Operating Temp : - 10 deg C to + 45 deg C (l) Lumen Efficacy of LED : ≥ 120 Lm/W (m) System Luminous Efficacy : ≥ 100 Lm/W (n) CRI : ≥ 80 (o) CCT : 5700K (p) Driver : Integral SMPS based constant current type with short circuit , surge voltage protection upto 2.5 KV. (r) IP rating : 20 (s) IK rating : 03

S&F ultra slim recess mounted LED luminaire panel with following specifications complete all as specified and directed.:- (a) System Power : 36W (b) Size : 2x2ft (c) Housing : Powder coate aluminium extruded frame with CRCA sheet back cover (d) Diffuser : Opal Polycarbonate (e) Rated Voltage : 240V (f) Safe operating Voltage : 140V to 270V (g) Rated Frequecy : 50 Hz (h) Power Factor : ≥ 0.95 (j) THD : ≤ 10 (k) Operating Temp : - 10 deg C to + 45 deg C (l) Lumen Efficacy of LED : ≥ 140 Lm/W (m) System Luminous Efficacy : ≥ 95 Lm/W (n) CRI : ≥ 80 (o) CCT : 5700K (p) Driver : Independent isolated SMPS based constant current type with short circuit , surge voltage protection. (q) IP rating : 20 (r) IK rating : 03

S& F in replacement LED bldg security light fitting complete with mounting bracket made out of light grade GI pipe 40mm bore 1.20 mtr long bend to shape including 02 Nos of 40x5mm FI clamps with GI bolt, nut, washer and 3-core copper cable connection from ceiling rose to light fitting. Specification of light fitting are as under complete all as specified and directed. :- (a) System Power : 35 W (b) Housing : Pressure die cast aluminium alloy having separete optical & control gear compartment, top opening, polyster powder coated after phosphochromate treatment (c) Optics : Polycarbonate UV stabilised with integrated lens (d) Light source : SMD LED module mounted on MCPCB (e) Rated Voltage : 240V (f) Safe operating Voltage : 140V to 270V (g) Rated Frequecy : 50 Hz (h) Power Factor : ≥ 0.95 (j) THD : ≤ 10 (k) Operating Temp : - 10 deg C to + 50 deg C (l) Lumen Efficacy of LED : ≥ 140 Lm/W (m) System Luminous Efficacy : ≥ 100 Lm/W (n) CCT : 5700K (o) Driver : Inbuilt SMPS based constant current type with protections for output open / short circuit , phase to phase, over voltage & surge voltage upto 10KV. (p) IP rating : 66 (q) IK rating : 07

S&F in replacement LED Highway light fitting having following specifications complete all as specified and directed. :- (a) System Power : 200W (b) Housing : Pressuredie cast aluminium alloy with polyster powder coating (c) Cover : Tempered protective toughened glass thermal & shock resistant (d) Optics : LED module with SMD LED mounted on MCPCB (e) Rated Voltage : 240V (f) Minimum Safe operating Voltage range : 140V to 270V (g) Rated Frequecy : 50 Hz (h) Power Factor : ≥ 0.95 (j) THD : ≤ 10 (k) Operating Temp : - 10 deg C to + 50 deg C (l) Lumen Efficacy of LED : ≥ 150 Lm/W (m) System Luminous Efficacy : ≥ 130 Lm/W (n) CRI : ≥ 80 (o) CCT : 5000K to 5700K (p) Driver : Buitl- in Potted electronic, SMPS based constant current supply type having open circuit, short circuit, over voltage & surge voltage protecion upto 10KV with integral SPD. (q) IP rating : 65 (r) IK rating : 07 (s) Mounting : Suspended by means of heacy duty nickel plated forged eye bolt. Note (for item srl no. 12 to 15) :- Make of light fitting & Driver shall be same and manufactutrer shall have in house NABL accredited lab.

M&L for taking down existing old fans complete of any type/size and deposit in AGE E/M store yard for further disposal, complete all as specified and directed.

S & F heavy duty industrial type Air Circulator fan, steel body AC single Phase. 230V oscilating, 3-speed control with push button, adjustable vertical suitable for wall/MS structure mounting as per site conditions of size 450MM sweep, 1440 RPM, complete all as specified and directed.

S & F 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 220 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose, complete all as specified and directed. Make: Havells Model No. Efficiencia Neo (BLDC 26W), Orient Model No. AEON, Crompton Model No.Energion HS.

S & F heavy duty exhaust fan steel body AC single phase 230 Volts 50 Hz of size 450 mm sweep with blade and frame, louvers, complete all as specified and directed.

S & F heavy duty exhaust fan steel body AC single phase 230 Volts 50 Hz of size 600 mm sweep with blade and frame, louvers, complete all as specified and directed.

M&L for sub main wiring with 10 Sqmm nominal cross sectional area, four single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 10 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of suitable dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing including taking down old sub main wiring complete all as specified and directed. (Note : 5 Run of single core wire and 1 run of conduit shall be measured and paid as 1 unit)

All as per Srl item No.21 above but for 02 x 6 Sqmm for phase & neutral and 01 x 6 Sqmm for continuous earth wire

All as per Srl item No.21 above but for 02 x 4 Sqmm for phase & neutral and 01 x 4 Sqmm for continuous earth wire

All as per Srl item No.21 above but for 02 x 2.5 Sqmm for phase & neutral and 01 x 2.5 Sqmm for continuous earth wire concealed/surface.

All as per Srl item No.21 above but for 02 x1.5 Sqmm for phase & neutral and 01 x 1.5 Sqmm for continuous earth wire concealed/surface

S&F in replacement industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 230 volts of 32 Amps, 'C' curve 10 KA breaking capacity and flush to wall/ surface as per site conditions including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing, complete all as specified and directed.

S&F in replacement sheet metal enclosure distribution board confirming to IEC- 61439-3, single pole and neutral, AC, 240 volts,12 way, with 100 Amps rated copper bus bar and metal double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed. Note :- MCB and DB shall be of same make

S&F in replacement sheet metal enclosure distribution board confirming to IEC-61439-3, single pole and neutral, AC, 240 volts,8 way, with 100 Amps rated copper bus bar and metal double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete. Note :- MCB and DB shall be of same make

S&F in replacement MCB confirming to ISI/IEC- 60898-1(2002), SP, AC, 240 volts of 06 to 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs , complete all as specified and directed.

S&F in replacement MCB confirming to ISI/IEC- 60898-1(2002), SPN, AC, 240 volts of 40 to 63 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs, complete all as specified and directed.

S&F in replacement MCB confirming to ISI/IEC- 60898-1(2002), TP, AC, 415 volts of 25 to 63 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs , complete all as specified and directed.

S&F in replacement sheet metal enclosure distribution board Vertical triple pole and neutral (VTPN), AC, 440 volts, 04 ways with minimum 200 Amps rated copper bus bar for each phase, 2 neutral bar, 2 earth bar and cable ties metal door with IP 43 & IK 09 protection confirming to IEC 61439-3, along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing suitable for 4-pole MCCB as incomer & MCB SP as outgoing having rating as per load requirement, complete all as specified and directed.

S&F in replacement sheet metal enclosure distribution board Vertical triple pole and neutral (VTPN), AC, 440 volts, 06 ways with minimum 200 Amps rated copper bus bar for each phase, 2 neutral bar, 2 earth bar and cable ties metal door with IP 43 & IK 09 protection confirming to IEC 61439-3, along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing, suitable for 4-pole MCCB as incomer & MCB SP as outgoing having rating as per load requirement complete all as specified and directed. Note for item Srl Item No. 32 & 33) :- (i) MCCB & MCB shall be measured and paid separately under respective item of sch. (ii) Make of DB, MCCB & MCB shall be same.

S&F tripple pole and earth enclosure with three pin and earth plug with socket complete with one triple pole MCB 63 AMP C series, 10 KA breaking capacity incl flush / surface mounting completed all as speified and directed.

S & F in replacement of following MCCBs 4 Pole,415 Volts AC 50 HZ Adjustable type,confirming to IS/IEC standards, Ics=100% Icuwith IP protection IP 20 complete all as specified and directed.

(a) 125 Amps 16 KA

(b) 160 Amps 25 KA

(c) 250 Amps 36 KA

(d) 400 Amps 36 KA

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick directly buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to GI wire 4mm dia by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 15 mm bore light grade for protection of earthing strip, 20mm bore light grade GI pipe for watering, PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate, watering pipe 20mm bore light grade, funnel with wire mesh, 50 mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8 mm MS bars at 150 mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and including excavation & earth work & connecting the earthing point / equipment and testing complete all as specified and directed. (Note :- Testing will be carried out in presence Engr-in-Charge)

M&L for GI wire 4mm dia as in earth continuity conductor fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe etc complete all as specified and directed.

Supply, installation, testing and commisioning of indoor type LT Control Panel board confirming to IS/IEC 61439 Part 1 and Part 2 with all type test certificate and design verification with switchgear (ACB/MCCB) at 4000A short circuit test 65KA made out of stainless steel (SS-304) cubical enclosure compartmentalised type brushed suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc. The enclosure shall be made of 2mm thick SS-304 sheet and inner compartment should be 1.6mm thick. The fixing of doors shall be on SS hinges with anti-theft provision ( the door can't be removed from enclosure without cutting enclosure). All fabrication/welding shall be done with TIG/MIG or as approved by Engineer-in-Charge suitable for SS-304. Enclosure shall be suitable for AC supply system 415 volts, 3 phase, 4 wire, 50Hz. IP-56 class protection and mounted on channel 75mm welded with panel of SS-304 with 04 Nos foundation bolt of size not less than 20mm dia and 300mm long. The enclosure shall have provision of separate cable alley. Cable entry from bottom side including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked, 1100 volts grade of appropriate size (but not less than 2.5 Sqmm) and comprising of the following :- Incoming :- (i) MCCB 4 pole 400 Amp, 415V, 36KA, Ics=100% Icu with adjustable thermal(0.8 to 1ln) & Magnetic (5 to 10ln) setting - 01 No. (ii) 4-pole Aluminium Bus Bar of 600 Amp (iii) Digital type 3-ph multifunctional meter to measure Amp, Volt, Hz (iv) CT of ratio 400/5 Amp - 01Set of 3 (v) LED phase indicator lamp (RYB) - 01 Set of 3 Outgoing :- (i) MCCB 4 pole 125 Amp, 415V,16KA, Ics=100% Icu with adjustable thermal(0.8 to 1ln) & fixed Magnetic setting at 10ln - 04 Nos. Note:- Drawings to be approved by GE.

Supply, installation, testing and commisioning of indoor type LT Control Panel board confirming to IS/IEC 61439 Part 1 and Part 2 with all type test certificate and design verification with switchgear (ACB/MCCB) at 4000A short circuit test 65KA made out of stainless steel (SS-304) cubical enclosure compartmentalised type brushed suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc. The enclosure shall be made of 2mm thick SS-304 sheet and inner compartment should be 1.6mm thick. The fixing of doors shall be on SS hinges with anti-theft provision ( the door can't be removed from enclosure without cutting enclosure). All fabrication/welding shall be done with TIG/MIG or as approved by Engineer-in-Charge suitable for SS-304. Enclosure shall be suitable for AC supply system 415 volts, 3 phase, 4 wire, 50Hz. IP-56 class protection and mounted on channel 75mm welded with panel of SS-304 with 04 Nos foundation bolt of size not less than 20mm dia and 300mm long. The enclosure shall have provision of separate cable alley. Cable entry from bottom side including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked, 1100 volts grade of appropriate size (but not less than 2.5 Sqmm) and comprising of the following :- Incoming :- (i) ACB 4 pole 630 Amp, 415V, 50KA, Ics=100% Icu, MOD type, with advance self powered electronic protection, neutral overload protection - 01 No. (ii) 4-pole Aluminium Bus Bar of 1000 Amp (iii) Digital type 3-ph multifunctional meter to measure Amp, Volt, Hz (iv) CT of ratio 630/5 Amp - 01Set of 3 (v) LED phase indicator lamp (RYB) - 01 Set of 3 Outgoing :- (i) MCCB 4 pole 320A, 415V,36KA, Ics=100% Icu with adjustable thermal(0.8 to 1ln) & Magnetic (5 to 10ln) setting - 02 Nos. (ii) MCCB 4 pole 160 Amp, 415V, 25KA, Ics=100% Icu with adjustable thermal (0.8 to 1ln) & fixed Magnetic setting at 10ln) - 02 Nos. Note:- Drawings to be approved by GE.

Supply, installation, testing and commisioning of indoor type LT Control Panel board confirming to IS/IEC 61439 Part 1 and Part 2 with all type test certificate and design verification with switchgear (ACB/MCCB) at 4000A short circuit test 65KA made out of stainless steel (SS-304) cubical enclosure compartmentalised type brushed suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc. The enclosure shall be made of 2mm thick SS-304 sheet and inner compartment should be 1.6mm thick. The fixing of doors shall be on SS hinges with anti-theft provision (the door can't be removed from enclosure without cutting enclosure). All fabrication/welding shall be done with TIG/MIG or as approved by Engineer-in-Charge suitable for SS-304. Enclosure shall be suitable for AC supply system 415 volts, 3 phase, 4 wire, 50Hz. IP-56 class protection and mounted on channel 75mm welded with panel of SS-304 with 04 Nos foundation bolt of size not less than 20mm dia and 300mm long. The enclosure shall have provision of separate cable alley. Cable entry from bottom side including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked, 1100 volts grade of appropriate size (but not less than 2.5 Sqmm) and comprising of the following :- Incoming :- (i) MCCB 4 pole 250 Amp, 415V, 36KA, Ics=100% Icu, with adjustable thermal(0.8 to 1ln) & Magnetic (5 to 10ln) setting - 01 No. (ii) 4-pole aluminium bus bar 400 Amp (iii) Digital type 3-ph multifunctional meter to measure Amp, Volt, Hz (iv) CT of ratio 200/5 Amp - 01Set of 3 (v) LED phase indicator lamp (RYB) - 01 Set of 3 Outgoing :- (i) MCCB 4 pole 63A, 415V,16KA, Ics=100% Icu with adjustable thermal(0.8 to 1ln) & fixed Magnetic setting at 10ln - 04 Nos. (ii) MCCB 4 pole 160 Amp, 415V, 25KA, Ics=100% Icu with adjustable thermal(0.8 to 1ln) & Magnetic (5 to 10ln) setting - 02 Nos. Note:- Drawings to be approved by GE.

Notes for item Srl Item No. 38 to 40 :- (i) Panels from licenced system integrator of approved OEM shall not be accepted. (ii) All MCCBs shall be provided with external handle operating mechanism rotary type with ON,OFF & TRIP position. (iii) All panel doors shall be provided with flexible type tinned copper earth lead. (iv) Earth bar shall be provided throughout the panel length at bottom extended both sides.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick directly buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to GI strip 32 x 6mm by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 40 mm bore light grade for protection of earthing strip, 20mm bore light grade GI pipe for watering, PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate, watering pipe 20mm bore light grade, funnel with wire mesh, 50 mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8 mm MS bars at 150 mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and including excavation & earth work & connecting the earthing point / equipment and testing complete (Note :- Testing will be carried out in presence Engr-in-Charge)

M&L for GI earthing strip of size 32x6mm fixed on wall /roof etc with and including insulator and all fixing arrangements etc complete all as specified and directed by Engr-in Charge.

Supply and laying in repair on wall/roof XLPE insulated armoured heavy duty, electric power cables 1100 Volts grade with stranded aluminium conductor with and including suitable size lugs for connection & clamps, saddle and all fixing arrangements as reqd at site and directed by Engr-in Charge complete of following sizes :-

(a) 25 sqmm 3.5 core

(b) 50 sqmm 3.5 core

Supply & fixing mild steel work for frame, clamping etc made out of MS angle/MS Sheet/ Flats/ Channel etc bent to shape as required at site for fixing DB/ Enclosure/ Fittings of any type including cutting, drilling, welding, shapping, bolting/riveting comfirming to Fe-290, Gde E-165 and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including prepration of surface, complete all as required at site, complete all as specified & directed.

AMIT ASSOCIATES (BID ID -3401617)

M/s Arihant Builders (BID ID -3401430)

M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3400718)

ASSOCIATED CONSTRUCTION CO. (BID ID -3401923)

India Guniting Corporation (BID ID -3401733)

TRIVENI CONSTRUCTIONS (BID ID -3401460)

B D RAIZADA PROJCTS PVT LTD (BID ID -3401819)

AMIT ASSOCIATES (BID ID -3401617)

ASSOCIATED CONSTRUCTION CO. (BID ID -3401923)

M/S SURAT SINGH AND SONS (BID ID -3399609)

India Guniting Corporation (BID ID -3401733)

M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3400718)

TRIVENI CONSTRUCTIONS (BID ID -3401460)

B D RAIZADA PROJCTS PVT LTD (BID ID -3401819)