PROVN OF IMPROVEMENT OF FLOORING AND SANITARY FITTINGS IN OTM BATHROOM BLDG NO P144OF 87 MTN BDE CAMP AND PROVN OF 70 RM SEWAGE LINE BETWEEN THREE CHAMBER IN THE PREMISES OF 21 JAK RIF AND PROVN OF COVERED PATHWAY WITH PATH AND ALLIED INFRA FROM OR M

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as specified and as directed.

Demolition of cement concrete floors and n exc 15cm thickness (below or above ground level ) all as specified and as directed.

25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified and as directed.

Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 laying floor finishes complete all as specified and as directed.

Non skid coloured ceramic tiles (square/rectengular) 8 to9 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

10 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:3 and finished even and fair for receiving tiles complete all as specified and as directed.

Glazed coloured ceramic tiles in dado/vertical surface (300x450mmx 7mm) thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and as directed.

Screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 laying floor finishes complete all as specified.

Machine cut kota stone slab flooring 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Machine cut kota stone slab flooring 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

150mm wide strip of makrana white marble 20 mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing types complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Rendering 15mm thick in two layer (10+5 mm) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed. (Water proofing compound to be measured and paid for separately).

Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 5 mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Preparation new surfaces plastered or unplastered and applying three coats of white wash on ceiling all as specified and as directed.

Preparation Old surfaces including complete Removal of existing surface of white wash and applying two coats of white wash on ceiling all as specified and directed.

Applying two coats of cement base paint on walls after preparation of newly plastered surfaces complete all as specified and as directed.

Preparation of old surfaces, plastered or unplastered of wall (including facia) and applying two coats of weather proof exterior emulsion paint (apex) painting on walls complete all as specified and as directed.

Preparation Old surfaces including complete Removal of existing surface of cement base paint and applying two coats of cement base paint on walls complete all as specified and as directed.

Two coat of Oil bound distemper including a coat of primer including preparation of newly plastered surfaces of wall complete all as specified and as directed.

Preparation Old surfaces including complete Removal of existing surface and applying two coats of Oil Bond distemper on walls all as specified and directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), complete all as specified and directed by Engineer-in Charge/GE.

150 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. (ISI Mark)

150 mm aluminium handles, cast type anodised complete all as specified and directed. (ISI Mark)

Solid PVC door frame of size 50mm x 47mm made out of 5mm both side Prelam PVC sheet used instead of plain colour PVC Sheet and edge will be painted to match with prelam sheet. reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all as specified and as directed.

Factory made solid panel PVC door shutter 28 to 30mm thick style ,with 2,4 or 6 raised panel design with 2mm thick Moulded prelam PVC sheet on the front face & 2mm Prelam PVC sheet on back face all as specified and as directed.

Demolition of brick/stone masonry built in CM. complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 bricks all complete all as specified.

Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cm 1:4 complete all as specified and as directed.

Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as specified and as directed.

Roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3.0 Kg/ sqm including 10mm thick flooring in CM (1:3) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately).

Applying bituminous primer on roof surfaces @ 0.40 ltr/sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 kg/sqm and provide modified polymeric five layered APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polythylene film. Min wt of memebrane will be 3.5 kg/sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm blinded with fine sand in dry condition @ 0.5 kg/sqm and applying aluminium Paint all as specified and directed by Engr-in-Charge/GE.

Providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement complete all as specified and as directed.

Vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all as specified and as directed.

Water closet (Orissa pattern) including lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe) fixed in repairs complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan pedestal pattern, white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seal, seat cover ,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe complete all as specified and as directed.

S&F aluminium tubular towel rail, 20mm dia, D type, 60cm long between flanges aluminium anodized, fixed with rawl plugs. complete all as specified in repairs. (ISI Mark)

S&F steel peg set colour coated of six as per sample in repairs complete all as specified and as directed.

Dismantling cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia taking out from trenches or fixed to wall upto 100mm complete all as specified and as directed.

100mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cement joints,laid in trenches or in floors complete all as specified and as directed.(ISI Marks).

75mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cemeent joints,laid in trenches or in floors complete all as specified and as directed.(ISI Marks)

100mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cemeent joints, fixed to walll complete all as specified and as directed.

75mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cemeent joints,fixed to wall complete all as specified and as directed.

50mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cemeent joints,fixed to wall complete all as specified and as directed.

Salt glazed stone ware gully traps square or round mouthed, type P of size 150x150mm set and jointed to drain pipe with cement mortar (1:1) including demolition of old unserviceable gully traps complete all as specified and as directed..

S&F Cast iron bends (any radius diminishing pieces or tapes (larger bore measured), 75mm bore fitted with oval access door fixed with rubber ring joints as in repairs complete all as specified and as directed.

S&F Cast iron bends (any radius diminishing pieces or tapes (larger bore measured), 100mm bore fitted with oval access door fixed with rubber rings joints as in repairs complete all as specified and as directed.

S&F 75mm Cast iron floor traps with grating including jointing to waste pipe fixed cncrete type B1 (1:2:4). complete all as specified and as directed.(ISI Mark)

Cast iron branch pieces, single/double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 100 bore, fitted with oval access door as in repairs complete all as specified and as directed.

Cast iron branch pieces, double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 75mm bore, fitted with oval access door as in repairs complete all as specified and as directed.

50mm Cast iron cowls complete all as specified and as directed.

Cast iron Reducer 100mm for connecting and fixing gas pipe on walls as in repairs complete all as specified and as directed.

S&F Cast iron Reducer 75 mm for connecting and fixing gas pipe on walls as in repairs complete all as specified and as directed.

Taking down eaves gutters and and rain water pipes (any size or pattern ), including all fittings incl removal of store and sold to contractor through credit complete all as specified and as directed.

110 mm bore PVC SWR bends and fixed with joint sealent etc complete all specified and as Directed

110mm PVC (SWR) pipes single/Double socketed of any length with rubber ring joints pressure rating 4 kg/cm2 fixed to wall incl clamp etc complete all as specifiedand as directed.

Stack clamps out of 50mm by 5mm flat iron and 6mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof 75 mm bore of pipe complete all as specified and as directed.

Stack clamps out of 50mm by 5mm flat iron and 6mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof 100mm bore of pipe complete all as specified and as directed.

M/L for PCC 1:5:10 TY E-2 as in Sunken floor /foundation filling and mass Conc all as specified

M&L 3mm thick wall care putty on walls including preparation. etc all as specified and as directed Make : JK Birla

Viterious china urinals half stall white incl CP urinal Spray Nozzal complete incl providing and fixing of plug bedding urinal against wall in cement motor 1:2 securing urinal to plug with and incl 60mm long brass screws pointing incl 60mm long brass complete all as specified and as directed.

Dismantling water Tanks exc 1000 ltrs & n.exc 2000 ltrs complete all as specified and as directed.

Rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 litres including all accessories, all as specified.

S&F in repair 15 mm bore bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F fancy type chromium plated stop valve cast copper alloy, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm with long shank and cup (concealed type).

S&F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs 20mm bore brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

Angle valves, cast copper alloy,screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair, for 15mm dia of pipe complete all as specified and as directed.

S&F in repairs CP Soap dish as specified and directed

S&F for Shower roses 15 mm chromium plated with or without swivel joints, any size, including 125 mm long arm and fixing to steel pipe or union, complete all as specified and as directed.

S&F in repair Waste coupling of PTMT for 32mm dia discharge pipe (half or full threaded) (Minimum weight 32mm 45gms/ 40mm-60 gms) complete all as specified and as directed.

Waste fittings 32 mm , brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Taking up or down 15mm Bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified and as directed.

Taking up or down 20 mm Bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified and as directed.

15 mm dia galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and as directed.

20 mm dia galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and as directed.

Refixing 15 mm bore old steel water tubing medium grade galvanised and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and as directed.

Refixing 20 mm bore old steel water tubing medium grade galvanised and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and as directed.

S&F in repair PVC connection 15mm bore with ptmt nuts of length 450mm complete all as specified and as directed.

Joint free non skid ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-charge/GE.

Light shade vitrified ceramic tiles, 10 mm thick (square/rectangular) polished,area of each tiles n exc 0.36 sqm,in floors etc over 15 mm thick screed bed in cement mortar 1:4 set set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Light shade vitrified ceramic tiles, 10 mm thick (square/rectangular) polished,area of each tiles n exc 0.36 sqm,in skirtings etc over 10 mm thick back coat in cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Glazed ceramic coloured tiles 600 x 300 x 10 mm thick as in skirting / dados set and jointed in neat cement slurry and pinted in white or coloured cement to match over 10 mm back coat in CM 1:3 all as specified and as directed.

Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15 mm thick screed bed in cement mortar 1:4 set set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in kitchen platform, floors, aprons etc complete all as specified and as directed.

Granite slab 20 mm thick as in pillars, window cill, cooking platform and the like in cement motar 1:4 including painting in white cment 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations complete all as specified and as directed.

Preparation of new plastered wall surfaces and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 3mm thick wall care putty complete all as specified and as directed by Engr-in-charge/GE.

Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

Factory made solid panel PVC moulded door shutter, 28 to 30 mm thick(styles), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

Mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and as directed.

100 mm long aluminium anodised tower bolts, fixed in screws complete all as specified and as directed by Engr-in-charge/GE.

Supply and fix in door handle, 100 mm size, aluminium anodised, complete all as specified and as directed by Engr-in-charge/GE.

300mm long aluminium anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clip of sheet, and fixing bolts and sliding bolts of stainless steel complete all as specified and as directed by Engr-in-charge/GE.

Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Powder coated Anodised aluminium window and ventilator shutters, Sliding/Hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Powder coatedAnodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge/GE.

4mm thick sheet glass, frosted or grounded on one side with rubber beading around the glass, in squares n exc 0.50 sqm complete all as specified and as directed.

Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

Dismantling wrought iron or mild steel work in any description not otherwise specifically provided for all as specified and as directed.

Providing and fixing stainlesssteel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where everrequired) and fitting the same with necessary stainless steel nuts and bolts complete, includingfixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor orthe side of waist slab with suitable arrangement complete all as specified and as directed.

S&F in repairs drapery rod of 25mm dia stainless steel decorative along with brackets and end caps of quality as approved by GE.

S & F in repairs 12mm thick with 7 ply veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces fixed with screws to timber frame work complete all as specified and as directed.

Continuous (piano) hinges, mild steel,bright finishor electrogalvanised width of flaps (when open) 30 mm complete all as specified and as directed.

100mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Magnetic catches brass body and striking plate including letting in and fixed suitable for cupboard shutters complete all as specified and as directed.

Rotational molded (three layered as per IS 12701) polyethylene water storage storage tank (cylindrical vertical with closed threaded top) hoisted and fixed in position including connecting inlet/outlet pipe connecting with necessary fittings all as required at site and specified in SSR part -I of capacity 1000 litres and dismantling of old UNSV water tank of same capacity all as specified and directed by Engr-in-Charge/GE.

Supply and fixing "as in repair" ball valves of size 20mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed by Engr-in-Charge/GE.

S&F as in repairs fancy type single lever basin mixer Pillar tap, cast copper alloy, with capstan heads, chromiuk plated, screwed down high pressure with or without lettered "HOT" or "COLD" with long screwed shanks and fly nuts, screwed for iron pipe of bore 15mm complete all as specified and directed. Make : Cat No ARI-39001B

Supply and fix in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge/GE.

PVC waste pipe for WHB/Sink 32 mm/ 40 mm bore with one end with socket complete all as specified and directed.

Supply and fix in repairs PVC valveless, syphonic action, flushing cistern low level 10 ltrs capacity, white with inlet ball valve float and handle including brackets and flush pipe of polyethylene of low or high quailty PVC 32mm dia complete all as specified and as directed by Engr-in-charge/GE.

Supply and fix in repairs stainless steel grating doom 100mm dia complete all as specified and as directed by Engr-in-charge/GE.

CP towel rack 600 mm long with lower hangers all as specified and directed. Make : Cat No ACN-1181N

S &F in repair sheet glass shelf assembly 500 x 125 mm consisting of 5.5 mm thick sheet glass shelf with chromium plate bracket guard and railing 60 cm long . Cat No BEA-47

S&F in repairs one unit EWC of Make : Jaquar Cat Part No ZPS-WHT-1028 complete all as specified and directed.

S&F in repairs CP health faucet with 8mm dia 1.00m long flexible tube and wall hook with all accessories all as aproved. Make : Cat No ALD-CHR-579

All as per item No 61 above above but 75 mm bore pipe complete all as specified and as directed.

All as per item No 60 above but 75 mm complete all as specified and as directed.

110 mm PVC (SWR) vent cowl complete all as specified and as directed.

Providing and fixing flase ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm x 6mm thick of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRCO 0.50 to 0.75 as per IS 8225 : 1987, non combustible as per BS 475 (Part 4)-1970 and light reflectance of 85%(minimum) to be laid in true horizontal level suspended on interlocking metal T Grid of hot dipped galvanized iron section of 0.33mm thick (galvanised @ 120 grams per sqm both sides) comprising of main T runners of size 15 x 32 mm of length 3000 mm, cross T of size 15 x 32mm of length 600 mm x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e 50 mm long, 8 mm outer diameter M-6 dast fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specificatins, drawing and as per directions of Engr-in-Charge/GE.

5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and as directed.

S & F in repairs solid PVC wall lining consisting of 5mm thick Plain Colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and as directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5 m deep and getting out in any type of soil complete all as specified and as directed.

Returning filling in incl spreading levelling watering and well ramming in layers n exc 25cm thickness complete all as specified and as directed.

Removing excavated soil to a distance n exc 50m and depositing at alevel n exc 1.5m above the starting point complete all as specified and as directed.

PCC type D2(1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation complete all as specified and as directed.

PCC 100 mm thick type B2(1:2:4) using 40mm graded crushed aggregate as flooring finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Salt glazed stone ware drain pipe 150mm bore in trenches and jointed complete all as specified and as directed.

Salt glazed stone ware drain pipe200mm bore in trenches and jointed complete all as specified and as directed.

Concrete 1:4:8 type C2 using 40mm graded aggregateas in bed to 150mm drain pies incl packing under and haunching against the sides pipesafter they are laid and tested complete all as specified and as directed.

Concrete 1:4:8 type C2 using 40mm graded aggregateas in bed to 200mm drain pies incl packing under and haunching against the sides pipesafter they are laid and tested complete all as specified and as directed.

Walling of random rubble masonary , recangular coursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed.

Flush pointing to squared rubble masonry coursed or uncoursed in CM (1:3) complete all as specified and as directed.

PCC type B1(1:2:4) using 20 mm graded cushed stone agg as in coping ,benching and the like incl form work complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone graded aggregate work as in slabs supported on walls , beams etc complete all as specified and as directed.

RCC 1:2:4 M-25 using 20mm graded aggregates for precast cement conc slabs as in manhole covers etc set in cement mortar 1:4 complete all as specified and as directed.

Form work to soffits of suspended slabs and similar work not exceeding 200mm thick complete all as specified and as directed.

Mild steel steel TMT bars 10MM dia and over cut to length bent to shape reqd ,incl cranking ,bending spirally for hooping columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia complete all as specified and as directed.

Cutting in to existing manholes for forming new drains and making good to pipe and making good to pipe and rendering ,cutting out existing benching in cement conc 1:2:4 type B1(in 1/2 or 3/4 round in section)and refoRMing benching as reqd for 150mm bore pipe complete all as specified and as directed.

75 mm thick plain cement concrete type D-2 (1:4:8) (40 mm graded stone aggregates) as in sub base complete all as specified and directed.

Plain cement concrete 1:2:4 type B1( using 20mm graded stone aggregate) 100mm thick as in floor, complete all as specified and as directed by Engr-in-charge/GE.

Chequered cement concrete (glossy finish)tile 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment and including 20 mm thick screed bed cement mortar 1;6 complete all as specified and as directed.

Sand cushioning 20 to 30mm thick for fixing of inter locking tiles complete all as specified and directed by Engr-in-Charge/GE.

Machine pressed precast concrete interlocking paver block (glossy finish)of approved shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and no pigment, M-35 Grade of approved colour and design complete all as specified and directed by Engr-in-Charge/GE.

Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and as directed.

Cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foudation, filling, sub base and mass concrete complete all as specified and as directed.

Hard core of brokenstone or of gauge exc 63 mm but n,exc 100 mmdeposit,spread and levelled in layers n.exc 15 cm thick,water and rolled /rammed to tru surface complete all as specified and as directed.

Providing precast cement concrete block masonary with soild blocks, exc.10cm in width and setting in cement mortar , kerbs stone all as directed, 1:2:4 mix type B-1 complete all as specified and as directed.

Excavation in post holes (or similar holes) in any type of soil, each not exc 0.50 cum, getting out, removing surplus spoil to distance not exceeding 50 mtr and making good surface complete all as specified and as directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides fixed with angle cleats or other connecting plates conforming Fe 410-W (Gde-E-250) quality-A complete all as specified and as directed.

Rolled sections in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming Fe 410-W (Gde-E-250) quality-A Complete all as specified and directed

Preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge/GE.

Two coats of synthetic enamel paint over one coat of red oxide Zinc chrome on new steel surfaces of any description n.exc 10cm in width or girth including preparation of surfaces complete all as specified and as directed.

75mm thick Plain cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) finishing cement concrete surface even and smooth by using extra cement etc complete all as specified and as directed.

Coloured machine vibro mechenically floated glossy finish interlocking cement paver block,any shape and size confirming to IS 15658-2006 of 60mm thickness,M-35 Grade with,topping of cement mixed with imported pigment,colour and shape shall be approved by engr-in-charge/GE.

Excavation in post holes (or similar holes) in any type of soil, each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil complete all as specified and as directed.

Glazed coloured ceramic tiles in dado/vertical surface (600x300 x 10mm) thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

Rolled mild steel work conforming to Fe 410-W (Gde-E-250) quality-B as in Roof plate girder or single stanchions, built up of one beam of channel section with flange plates, caps bases, splices, angle brackets, cleats and other connections complete all as specified and directed

Preparation of new steel and iron surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge/GE.

M&L for 100 mm thick PCC 1:4:8 Type D2 using 40 mm graded stone aggregates as in sub base flooring etc .

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as directed.

M&L for Point wiring for one light/fan point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit (thickness not less than 1.5mm and 20mm dia), medium grade with Modular metal flush boxes & metal back plate for mounting modular type in adequate module of switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5Sq mm as earth wire stranded and conected to earth dolly as specified. Make: Havells/ Finolex/ Polycab.

All as per srl item No 172 but for 3 pin 10 Amps socket outlet independent including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per Srl item No 172 but for 3 Pin 20 Amps socket outlet independent with cable 4.0 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly complete all as specified and as directed.

S&F Modular switch one way 10 Amps 240 volt complete all as specified and directed.

S&F socket outlet 3 pin 10 Amp' flush type (Modular Type) with outer strip complete all as specified and as directed.

S&F socket Combination 20A, 6 pin, 3 module (Modular Type) with outer strip complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 4 Sq mm as earth lead all as specified. Including taking down old sub main wire complete all as specified and directed by Engr- in- charge/GE.

Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Block complete all as specified and as directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed.

S&F in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F in replacement MCB Single Pole, 230 Volt, Rating 10 to 40 Amps complete all as specified and as directed.

S&F in replacement MCB Single Pole and Neutral , 230 Volt, Rating 63 Amps complete all as specified and as directed.

S&F switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 Volts complete all as specified and as directed.

Supply & Fixing DB by SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way, confirming to IS 13032 & 8623 complete all as specified and directed.

Supply & Fixing MCB SPN, 32 to 63 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

Supply & Fixing MCB SP, 06 to 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

Earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required complete all as specified and directed.

Supply and fixing LED Bay light 70 W, Warm white, Die cast aluminium housing,sturdiness and excellent corrosion resistant , mounted on adjustable MS bracket ofof thickness 5mm with 2 eliptical slots of 10 x 20 mm, Built in electronic driver with lower THD , Open circuit protection, surge voltage protection, minimu lumen efficacy 150 lm/W with view angle 120 Degree , Polycarbonate lens with tempered protection toughned glass 5 mm, thermal shock and impact resistant IK-07, operating temperature -10 C to + 55 C , Voltage Range 140 V to 270 V, No harmuf UV & IR radiations complete all as specified and directed.

S&F Post top energy saving , environmental friendly, aesthetically designed with indirect symmetrical light distribution die-cast aluminium IP-65 luminaire with high power COB LED as light source of capacity 20 Watt, 6500K all as specified and directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 4 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 4 Sq mm as earth lead complete all as specified and directed.

S&F LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder conning up with three core flexible copper conductor cable of suitable size.

vmd traders (BID ID -3094560)

s l sharma and sons (BID ID -3091472)

M/S SHREE RAM DUBEY AND SONS (BID ID -3094678)

RAMAN CONSTRUCTION CO (BID ID -3087354)