Provision of Shed over FOB at various stations over SDAH division under Sr.DEN/III/SDAH including all other ancillary works.

I-NS Schedule- Cabling and Wiring Works 2118720.00 Below/P

Supply, installation, and commissioning of FRP cable trays (Width 300 mm) 1 conforming to relevant IS/IEC standards, inclusive of all accessories, support structures, anchoring hardware, and labour charges for complete and secure erection at designated locations. (Make: OBO/ Legrand/ Profab/JSW)

Cable trenching, laying, refilling with bricks & sand, rising, jointing, socketing where necessary as per General Specification.(L.T. Cable will be supplied by Railway) (Depth should be minimum 1m)

Cable laying through 2" dia. GI Pipe along with supply of GI Pipe as per General Specification. (G.I. Pipe Make: TATA/ Jindal / Bansal )(L.T. Cable will be supplied by Railway)

"Drawing of L.T. cable through PF wall / Structure by cleating / clamping etc as per General Specification.(L.T. Cable will be supplied by Railway)"

"Drawing of LT cable in Concealed way through PF wall / structure / building wall etc. as per General specification. 'L' hook should be provided at approx. every half meter length.(L.T. Cable will be supplied by Railway)"

"Cable laying upon cable tray with necessary binding/clamps etc. (L.T. Cable will be supplied by Railway)"

"Supply, laying, and termination of sub-main wiring comprising 3 run of 4mm² single- core copper conductor PVC FRLSH insulated wires, along with one run of 2.5mm² copper Earth Continuity Conductor (ECC), through G.I. conduit pipe, for PF shed/Car Shed/Shed of FOB etc. as per general specification of IE Rule.(PVC wire Make: Havells/ Gloster/ Polycab/RR Kabel/KEI/Mescab)"

"Supply, laying, and termination of sub-main wiring comprising 2 run of 4mm² single- 8 core copper conductor PVC FRLSH insulated wires, along with one run of 2.5mm² copper Earth Continuity Conductor (ECC), through G.I. conduit pipe, for PF shed/Car Shed/Shed of FOB etc. as per General specification of IE Rule.(PVC wire Make: Havells/Gloster/Polycab/RR Kabel/KEI/Mescab)"

"Supply and fixing of 3 pin, 5 amp, ceiling rose on the metal box of size (75 mm x 75mm x 60 mm deep) on surface or in recess with suitable size of phenolic laminated sheet cover in 9 front, painting etc. as required including electrical connection for Light & Fan points with 2 nos. 1.5 sq.mm, 1100V grade Copper PVC FRLSH, Single core, Multi-strand wire(for phase and neutral) along with 1 no. single core FRLSH PVC insulated copper wire of size 1.5 sq.mm, 1100V grade for ECC through flexible PVC conduit from ceiling rose connected with Sub-main as per General specification of IE Rule.(PVC wire Make: Havells/Gloster/Polycab/RR Kabel/KEI/Mescab)"

"Supply, laying, and termination of main/sub-main wiring comprising 2 run of 6mm² 10 multi-stranded single-core copper conductor PVC FRLSH insulated wires, along with one run of 2.5mm² copper Earth Continuity Conductor (ECC), through PVC conduit/casing in concealed manner as per General specification of IE Rule.(PVC wire Make: Havells/Gloster/Polycab/RR Kabel/KEI/Mescab)" Above/

II-NS Schedule- LED Luminaries 3291195.00 Below/P

"Design,Supply, installation and mounting layout for integrated LED TUBE LIGHT 4ft. 1 luminaires 1 X 20W (approx.) (Extruded Aluminium LED Batten) (IP:20) (indoor type) including fixing with G. I. clamps made of G. I. Flat of suitable size & G. I. Nut, bolts etc. as per General Specification. (LED Luminaries Make - Bajaj/ Philips/ Havells/ Crompton/ Panasonic/ Orient/Jaquar/Signify/Ecolink)"

"Design of mounting layout, supply, connection, fixing, testing, and commissioning of integrated LED trunking light fixtures, 40W, 4-ft (1200 mm)/80W, 8 ft (2400 mm)/ 120 W, 12-ft (3600 2 mm) length, with linear extruded aluminium housing, LED chip efficacy >140 lm/W, Min:IP65-rated, suitable for surface or suspended mounting. Includes all required accessories and suitable installation arrangement for complete functional deployment as per General Specification.(LED Luminaries Make - Bajaj/ Philips/ Havells/ Crompton/ Panasonic/ Orient/Signify/Ecolink) (Quantity of this item will be assessed in multiple of 1200 mm, i.e; 4 ft = 1 nos/ 8 ft = 2 nos/ 12 ft = 3nos.)" Above/

III-NS Schedule- General Electrical Works 1126748.00 Below/P

Supply and fixing of GI fabricated cable end box, 4 way as per Sr. DEE (G)/SDAH's Drg. No. SDAH/G/MISC/40 dt. 10.12.07.

"Supply and Fixing of thermoplastic fabricated cable end box, 4 way. As per Sr. DEE/G/SDAH's Drg no.- SDAH/G/4/2024, Dt.- 13.09.2024. Scale: N.T.S. (Enclosure Make: Grasp/CAPE/Hensel/Legrand)"

"Supply, installation, testing, and commissioning of 3-phase, 4-way TP&N vertical type distribution board (metal double door enclosure, IP:43 rated), comprising the following 3 components: a) 1 No. MCCB, 4-pole, 50-63A, breaking capacity 25kA b) 12 Nos. MCB, single-pole, 16- 32A, breaking capacity 10kA The distribution board shall be fixed using suitable ISI-marked G.I. fixtures and accessories, complete in all respects as per site conditions and conforming to relevant IS/IEC standards. (Make: Siemens/ ABB/ Schneider/ Lauritz Knudsen/ C&S/Havells/ Legrand/Hager) "

"Supply, installation, testing, and commissioning of single-phase 8-way MCB 4 distribution board (surface/concealed mounting type), comprising the following components: a) 1 No. Double Pole MCB, 32A, 10kA breaking capacity (incoming) b) 6 Nos. Single Pole MCB, 10A, 10kA breaking capacity (outgoing) Work shall include complete incoming and outgoing wiring terminations, provision of all necessary mounting hardware, accessories, and interconnections, executed as per site conditions and in compliance with IS/IEC standards. (Make: Siemens/ ABB/ Schneider/ Lauritz Knudsen/ C&S/Havells/ Legrand/Hager) "

"Supply,fixing,testing and commissioning of light control panel with contactor and electro mechanical timer comprising of the following - 1) MCB 32A, Three pole,10KA,415V,50Hz - 1 No., 2) Timer switch- 2 Nos., 3) Power Contactor,3pole,32A - 2 Nos., 4) Toggle switch 6A - 2 Nos., 5) 5 LED Indicators, Indication R,Y,B - 5 Nos. 6) Enclosure made of 14SWG GI sheet fabrication, Panel paint powder coated colour siemens gray and internal wiring with suitable size copper wire etc. (As per Sr.DEE/G/SDAH's drawing number, SDAH/G/1/2024 Dt. 26.02.2024).Fixing should be done by necessary GI fixture and connection with 70%,30% lighting circuit. (Switchgear Make: Siemens/ ABB/ Schneider/ Lauritz Knudsen/ C&S/ Havells/ Legrand/Hager)"

"Earthing work using two Nos. of 50 mm dia., 2.5 Mtr. long heavy gauge GI Pipe, 6 including construction of earth pit with all associated works, along with providing and fixing necessary earth connections from pit using 25 mm x 4 mm GI flat with GI nuts & bolts etc., complete with testing and commissioning, strictly in accordance with relevant IS codes, electrical safety standards. (G.I. Pipe Make: TATA/ Jindal / Bansal )"

Supply and installation of G.I. strip of size 25 mm x 3 mm (thick), fixed along walls by 7 grouting suitable size bolts with nuts at 450 mm intervals for earthing, including provision of necessary connections. The G.I. strip shall be separated from the wall using suitable size insulators with the bolts. The work shall be completed with testing and commissioning, strictly in accordance with relevant IS codes, electrical safety standards.