RENOVATION AND IMPROVEMENTS TO P-38 AND P-40 BLOCK CIVILIAN MARRIED ACCOMMODATION AT NO. 2 AFSB MYSORE

Amount

Demolition of Concrete in ground floors and pavings n exc 15 cm thick above or below ground level .

S&F Non - skid Ceramic colouerd tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed or bedding layer of mortar 1:4.

S&F Glazed ceramic coloured tiles in verticle surfaces 350 x 250 x 7 / 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick backing coat in CM 1:3.

S&F Non - skid Ceramic colouerd tiles 7 to 8 mm thick (square/ rectangular) of each tile exceeding 0.18 sqm but n exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed or bedding layer of mortar 1:4.

S&F Non - skid Ceramic colouerd tiles 7 to 8 mm thick (square/ rectangular) of each tile exceeding 0.18 sqm but n exc 0.38 sqm, in shertings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed or bedding layer of mortar 1:4.

Demolition of cement concrete (reinforced) in ground floors, steps and pavings n exc 15 cm thickness (below or above ground level)

M&L for cement concrete in 1:2:4 type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like

S&F for formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing)

Taking down Chowkhats or frames without taking off shutters from the frames n exc 1.5 Sqm each.

Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in CM 1:4.

Making good under cills or over arches, lintels and bressummers, including all pinning when necessary in CM 1:4.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain coloured PVC sheet reinforced with M.S Square tubes, supporting & fixing in opening as per specification all as specified and as diercted.

S&F factory made solid PVC Moulded door shutter ,30 mm thick (style)consisting of frame made out of MS tubes for top & Bottom rail , MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail : panelling of both side prelam PVC sheet to be fitted in the ms frame welded/sealed to the stiles & rails with suitable PVC seat beading ,and jointed together with solvent cement ,supplying and fixing in the frame at site as per specified and directed by Engr-in-Charge.

S&F Butt hinges, medium weight cold rolled mild steel 100 mm in size.

S&F Aluminium alloy, anodised, sliding door bolt 150 mm in length, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.

S&F Aluminium anodised, barrel tower bolts of extruded section, 100 mm in length.

S&F Aluminium handles, cast type 75 mm in size.

S&F in repair Harrison rails, Anodised Aluminium Alloy plated with fixing brackets, stops, rollers etc.

Cutting chases in brick wall, pinning in. making good to facing where required and pointing in cement mortar 1:3 to ends or edges of cills etc,. And cutting chases for concealed water tubing etc., and making good , cutting not exc 10 cm in girth & Taking up or down steel tubing 15 mm and connections, including removal to store and S&F tubes "medium grade", galvanised with all fixed complete to walls and ceilings or laid in floors.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F in Waste coupling of PTMT (half or full threaded). (Minimum weight 40 mm-60 gms), 40mm in size suitable for wash hand basin/sink.

S&F in repair fancy type chromium plated stop valves cast copper alloy screwed down high pressure with crutchor butterfly handle screwed both ends for iron pipe or for union 15 mm dia bore and fixed.

S&F in repair 15 mm dia bore pipe chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 Liters low level , white, with inlet, ball valve, float and handle including brackets and PVC connections 15mm size with PTMT nuts of length 600mm and 15 mm Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms).

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S&F in repair brass chromium plated tubular towel rail 20mm dia with brackets.

S&F in repairs water closet (Squatt Pattern ) complete including provision of cement concerte. Vitreous china squatting pan, Orissa pattern , size 580x440 mm white.

Dismantling of CI pipe joints in cement and taking out in trenches or in floor or wall, 100 mm dia.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints laid in floor or trenches 110 mm bore pipe.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls 110 mm bore pipe.

S&F PVC (SWR) bends any radius 110 mm bore pipe.

S&F 110 mm PVC (SWR) vent cowl.

S&F for PVC (SWR) junction single, (Single T) equal or unequal 110/110 mm bore.

S&F for PVC (SWR) couplers 110/110 mm bore.

M&L for preparation of old painted steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth, and applying one coat of synthetic enamel paint.

All as per item no 36 above but wooden surfaces

M&L Preparation of old plastered wall surfaces by washing, rubbing, brooming down or steel wire brushing or scraping down smoke soot, moulds, mass and efflorescent slats, and applying two coats of colour wash on walls.

M&L for complete removal of existing treatment of wall and applying two coat of distemper oil emulsion over priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

M&L for complete removal of existing treatment of ceiling and applying two coat of white wash over priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

Taking down steel window and ventilator (Without taking off shutter from the frame) of area n exc 1.50 Sqm each.

M&L aluminium anodised powder coated windows with 3 channels for catering mosquito proofing & 4mm thick glass with necessary accessories like jointing cleats, rubber packing,beading and screws etc complete,including powder coated aluminium grill of DG-103 as per TD drg.

M&L aluminium anodised powder coated louver ventilators &4mm thick tinted glass with openable hinges and necessary accessories like jointing cleats, rubber packing,beading and screws etc complete, as per TD drg.

M&L for preparation of old painted suraface of wall and applying two coats of External emulsion paint over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for Point wiring with 1.5 sqmm, single core ,PVC insulated, unsheathed FRLS cable, 1100 volts grade, IS -694 marked, with multi stranded copper conductor and earth continuity copper conductor cable of same size as in phase/neutral and connected to common earth dolly drawn through and including rigid PVC conduit of suitable size alongwith fittings and accessories, fixed /laid/concealed in walls/ceilings including cutting chases and making good to walls, floors etc, and also incl suitable sunken type pressed steel terminal box and suitable laminated sheet top cover for the following :- (a) One light/fan controlled by one, one way switch

All as per item No. 45 above but one three pin socket outlet 5 Amp controlled by one, one way switch on independent board

All as per item No 45 herein before but with 2.5 sqmm and 2.5 sqmm as earth conductor on independent board

Supply and fix switch piano, flush type, single one way 5 Amp

Supply and fix switch piano, flush type, single one way 15 Amp

Supply and fix socket outlet 2 in 1, 3 pin, flush type, 5 Amp

Supply and fix socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type

Supply and fix ceiling rose 3 Phase / PVC/ Polycarbonate, isolated body.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers

M&L in replacement submain wiring with PVC insulated, single core, multi stranded, 1100 volts grade unsheathed copper conductor cable in and including PVC Casing capping with accessories fixed on wall /ceiling with GI screws complete with 3 runs of 6.0 sq mm copper conductor all as directed.

Material and labour for making hole in wall for Fixing of Exhaust fan including cutting, plastering and making good by welding and mild steel work as required and painting the disturbed surfaces to match the existing colour complete all as specified and directed.

S&F in replacement SPN distribution boards protection class IP-43 single door suitable for mounting MCB with min 200 Amps rating bus bar SPN 08 way.

Supply and fixing 6 to 32 amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning

All as per item No 58 herein before but SPN 32 Amp

Taking out distribution board 4 way/ 8 way from existing location and making good disturbed surface complete all as specified and directed,

Power and Telecom Systems

ShaikPyarejanandsons

H S S ENGINEERS AND CONTRACTORS

S S BUILDERS

manoj trading agencies

Auromirra Enterprises

ANAND REFRIGERATION