PROVN OF CERTAIN SPECIAL REPAIRS TO OTM ACCN IN D and M REGT AT ACC and S AHMEDNAGAR UNDER AGE B/R I, GE (NORTH) AHMEDNAGAR

Amount

Taking down cement plaster on brick or concrete surfaces on wall/ceilling/stone/block etc including racking out joint, hacking for key,scrubbing down with water etc all as specified and as directed

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished even and smooth without using extra cement

M&L for rendering 15 mm thick in CM 1:6 over brick surfaces, finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:3 on ceillng, finished even and smooth all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4 over brick or concrete surfaces, finished even and smooth using water proofing compound @ 3% by weight of cement in toilet/bath prtion floor Note: WPC shall be measured and paid separately.

M & L applying two coats of OBD over a coat of primer on newly plastered wall surfaces over 2 coat of wall care putty preparation of surfaces all as specified and as directed.

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash.

M&L for preparing new plastered surfaces and applying Two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls.

Supply only integral water proofing compound

Refixing the steel tubing 20mm bore obtained from item No below after cleaning in new or old position (wall, ceiling, floor etc.) complete all as specified and as directed .

Refixing the steel tubing 25mm bore obtained from item No below after cleaning in new or old position (wall, ceiling, floor etc.) complete all as specified and as directed.

Disconnecting existing tanks,exc 500 n.exc 1000 Ltrs capacity setting aside for repairs, cleaning etc. and hoisting if required reconnectiong and re-fixing in position.

Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness, wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall, PCC fillets, benching etc and removing of the rubbish to a distance not exceeding 500 m from the building and depositing where complete all as specified and directed

Demolition of plain cement concrete (unreinforced) in ground floor including concrete at junctions of parapets and roof terraces, flashing kerbs walls, PCC fillets, benching coving of chajjah top/junctions etc complete all as specified

Material and labour for providing plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) for roof, kerb, or mud stops, rounded or chamfered on edges etc complete all as specified and as directed.

M&L for rendering 10mm thick CM (1:4) on roof slab top mixed with water proofing liquid finished even and fair without using extra cement complete all as specified. (WPC shall be measured and paid separately)

M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :- (i) Checking the roof slab by flooding test with water till total elimination of leakage/seepage/ dampness all as specified in SSR Part-I (after ascertaining location of leakage/seepage/ dampness, carrying out treatment vide item No. hereinafter of pressure grouting shall be operated at the required locations). (ii) Brushing surface with neat cement slurry at the rate of 3.00kg of cement per Sqm.(iii) Applying one coat of oil bound bituminous primer @ 0.25 kg/Sq. M (iv) Providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufactures (v) Apply two coat of solar reflective bituminous aluminium paint @ 0.15 kg/Sqm per coat over membrane over non assesble roof surfaces complete all as per manufactures instructions and as directed

S&F PVC(SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls and taking down old one .

S&F PVC(SWR) bend 110mm bore any radius and taking down old one .

M&L preparation of surfaces thoroughly by cleaning, washing and removing dust, dirt, oil and loose particles and applying liquid water proofing and seepage proof product of Dr. Fixit, Pidicrete,Asian ,Sika ,chokesy ltd in two coats as per manufacture instruction mix with cement on wall surafce . Note:- Application of liquid water proof material only will be carried out thorugh manufactures.

M&l for cutting of existing cracks on wall up to last edge of crack and 10 mm in wide and clean the groove properly and fill crack with filler adhesive materials (Water proofing sealent) with gunating machine up to last edge of crack in two coat and apply two coat of wall care putty and 2 coat of oil bound distemper.

Demolition of brick work or stone/ boulder masonry/PCC block, built in cement mortar or cement lime mortar including all quoins, pillars etc.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6

M & for Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded granite stone aggregate) in copings, kneelers, including weathering, slightly rounded or chamfered angles and throating, as directed

Material and labour for special treatment ot sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid complast 421 and applying one coat Each of Nittoproof 120 on plastered surface rendering again 10mm thick in CM 1:4 mixed with complast - 421 filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 1.5 Sqm including 40 mm dia 0.60 m pipe etc complete all as specified and directed by Engineer-in-Charge. Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

M&L applying evenly a tack coat of leakge/seepage proof polymer chemical of Dr fixt/chaukasi/asian at the rate of 1.2 kg per sq.m including cleaning/drying the surfaces in wet portion of floor brfore plastering in item no 06 above. Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

M&L for preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of white wash including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for preparing old surfaces of ceilings by brooming down or by steel wire brushing and applying one coat of white wash including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint including scafolding at any height complete all as specified and directed by Enggineer-in-charge..

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) including scafolding at any height complete all as specified and directed by Enggineer-in-charge..

M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying a coat of cement base paint on surfaces of walls.

Demolition of Cement concrete (unreinforced) in any description and in any position not otherwise specifically provided forand pavings n exc 15 cm thickness (below or above ground level) including floor finishes

Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removal of debries to a distance not exceeding 100m all as specified and as directed.

S&F Non-skid Coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) size of each tiles 400x400 mm in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6

M&L for Glazed ceramic coloured tiles in vertical surface 350*250*7 /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in backing of skirting and dado including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors aprons etc.

Material and labour for machine cut cudappah stone 18-20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L Rounding to edges of stone slabs one edge ,such as in steps cooking platform and other similar situations

M&L 20mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like in cement (1:4) including pointing in wihte cement (1:2) using marble dust with admixture of pigment ot match with shade of granite.

S & F in repair vitreous china wash basin, white back, size 500 X 400 mm x 190 mm , errecting on existing CI brackets including taking down old one alll as specified and as directed . Note: If the mentioned size is not available in the market , the next immediate higher size shall be provided by the contractor . Make of parryware Code :Flair C0476 or others equvelent in jaquar and Hindware

S&F in in repair vitreous china squatting pan of orrisa pattern, size 580X 440x300 mm white, with integral foot rest 'P' or 'S' trap, including taking down old one complete all as specified and as directed.Make of parryware Code :white C0117 or others equvelent in jaquar and Hindware

S & F Vitreous Ware wash down water closet (Pedestal), white (ETWC) and fixed in repairs including seat cover with brass screws and excluding flush pipe and flushing cystren

S&F 10 in repair litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old one complete all as specified and as directed

S&F 40mm low density polyethene pipe (LDPE) of pressure rating 6 Kg F/CmSqcm fixed complete in wall ,floor etc including taking down old one all as specified and as directed.

S & F in repairs 40 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

S&F GI tubes,40mm dia 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors as in spout in sunken floor

Taking up or down steel tubing 15mm dia and connections, including cleaning for re- fixing

Taking up or down steel tubing 20mm dia and connections, including cleaning for re- fixing

S&F 20 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.

S&F 25 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.

S & F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. Make of parryware Code :G1951A1 or others equvelent in jaquar and Hindware

S&F in repair 15 mm bore Fancy type sink taps (Swan neck), Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.Make of essco Code :TQT-523S or others equvelent in parryware and Hindware

S&F 15mm dia Chromium plated fancy type Bib taps long shank cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as spd & directed . Make of essco Code :DLX-512KN or others equvelent in parryware and Hindware

S&F waste coupling of PTMT 40mm (half or full threaded) sutable for kitchen sink. (Minimum weight 32mm- 45gms/40mm-60 gms)

S&F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)

S&F PVC connections 15mm size with PTMT nuts of length 450mm

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.

S & F 110 mm bore PVC (SWR) bends of any radius.

S & F 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door.

S&F PVC (SWR) pipes single socketed, 75mm dia in any length with rubber ring joints, laid in trenches or in floors

S&F PVC (SWR) bends any radius 75mm bore

S&F PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F Fixing in repairs Vitreous China Half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in ce

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel Squartube with singal side prelam PVC sheet used instead of plain colour PVC sheed & edges will be painted to match with prelam sheet & fixed in position as per manufacturer's instruction all as specified, as shown on drawing on page No 160 of SSR Part-II 2010

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board coare supplying & fixing in frame at site as per specification & drawing on sl. page no. 161 of SSR part II 2010

S&F IInd class hard wood plain solid, straight ,chowkats and frame, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified and as directed.

Taking down of chowkat with shutter without taking off shutters from the frame, not exceeding 1.5sqm each all as specified and as directed.

Taking down of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.

Hacking out old broken glasses any thickness, size, quality or description from from metal frame including punching out or drilling out old glazing pins/spring clips and providing and fixing new all as specified and as directed.

S&F sheet glass ordinary quality 3 mm thick with oil putty exceeding 0.5 sqm in each pane all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed.

S&F butt hinge, stainless steel 100mm long all as specified and as directed.

S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.

S&F aluminium anodised barred tower bolt of extruded section 200 mm long and fixed all as specified and as directed.

S&F extruded aluminium alloy handle fabricated type anodised 150 mm long

S&F 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and taking down old one all as specified and as directed.

M&L welding in repairs to broken hinges of doors and windows to metal frame all as specified and as directed.

S&F in repair PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including taking down old one all as specified and as directed

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms)

S&F in repair Chromium plated shower roses 125 mm dia size with or without swevel joints and size including fixing to steel pipe or union. Make ofessco Code :EOS-542A or others equvelent in parryware and Hindware

Excavation in trenches n.exc 1.5M wide and N.exc 1.5M in depth for foundation etc or for manholes n.exc 10 Sqm on plan and n.exc 1.5m indepth and getting out in soft/loose soil all as specified and directed by engineer-in-charge

Excavation in tr enches n.exc 1.5M wide and N.exc 3.0 M in depth for foundation etc or for manholes n.exc 10 Sqm on plan and n.exc 1.5m indepth and getting out in hard/dense soil all as specified and directed by engineer-in-charge

Demolition of cement concrete (unreinforced) blocks/bricks/RR walling built in cement mortar including coping etc of any description etc complete all as specified.

Demolition of cement concrete (unreinforced) of any description,in any position,from the foundation of manhole including benching etc complete all as specified.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for.

Demolition and breaking up drain pipes 150 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

All as per item above but 200 mm bore pipe

Returning,filling in including spreading levelling,watering and well ramming in layers n.exc 25cm complete as directed

Removing excavated soil n.exc 50mand depositing where directed at a level n.exc 1.5M above the starting point

M&L for 150 mm bore Reinforced cement concrete pipe,type NP-2,haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40 mm graded machenically crushed stone aggregate and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified as following. Note: (i) Cutting into existing sewer line/manhole shall be measured and paid seperately. (ii) Excvation & earthwork shall be measured & paid seperately.

M&L for 200 mm bore Reinforced cement concrete pipe,type NP-2,haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40 mm graded machenically crushed stone aggregate and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified .

M&L for 300 mm bore Reinforced cement concrete pipe,type NP-2,haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40 mm graded machenically crushed stone aggregate and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified .

M&L for reinforced cement concrete 1:2:4 type B-1 using 20 mm graded mechanically crushed stone aggregate as cover slabs for drain and manhole including necessary formwork and making holes 25 mm dia@150 mm centre to centre ,set and jointed in cement morat 1:6 complete all as specified and as directed.

M &L for Plain Cement Concrete Type B0 1:3:6 type C-1 using 20 mm graded mechanically crushed stone aggregate as in cills,stpes,bands ,coping,bed plates,kerbs,hold fasts block etc i including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified.

M &L for Plain Cement Concrete Type B0 1:3:6 type C-2 using 20 mm graded mechanically crushed stone aggregate as in surface chanel & drain etc complete all as specified.

M &L for Plain Cement Concrete Type B0 1:4:8 type D-2 using 40 mm graded mechanically crushed stone aggregate as in foundation,filling and mass concrete or similar work etc complete all as specified.

M&L 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6 with finished even and fair with out using extra cement complete all as specified and directed .

M&L 10 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4 with finished even and fair with out using extra cement with and including water proofing compound @3% by weight of cement all as specified and directed .NOTE- Supply only integal water proofing compounnd shall be measured and paid separately

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips

Cutting in to existing manholes for connecting new drains 200/300 mm internal dia of making good to pipe and rendering cutting out existing benching for and foRming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and refoRming benching as required

Cutting in to existing manholes for connecting new drains 150 mm internal dia of making good to pipe and rendering cutting out existing benching for and foRming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and refoRming benching as required

S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete, including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Charge.

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn in and incl PVC Casing and capping ISI Marked with its accessories with provn of PVC boxes and fixed with brass screws cup washer for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed.

One light point controlled by switch 5 Amp single pole one way

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

All as per Item No 109 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for One socket outlet 6/3 pin 15 Amp controlled by one switch on independent board

S&F switch piano flush type single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge

S&F Socket outlet 6/3 pin, 15/16 Amps,flush type

S&F switch piano flush type single pole, one way 15/16 Amp etc complete all as specified and directed by Engineer-in-Charge

S&F Lamp Holder, PVC/Polycarbonate type with cord grip cap suitable for batten fitting

M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing LED lights fitting 1x20 Watt,220V,AC Decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

Supply & fix in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including twin core twisted flexible copper conductor cable of suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing Sheet Metal Enclosures with Single pole and neutral enclosures with a two pin and earth plug and socket complete with one single pole MCB 20 Amps

S & F in replacement double door Sheet metal enclosures factory made DBs SPN, 8 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No: 5076 11 or equivalent in Simens/ Hager/ L&T

Supply & fixing MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLS stranded copper conductor cable 6 Sqmm with one 6 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note:3core of 6 sqmm wire and casing caping is measured as one length.

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLS stranded copper conductor cable 4 Sqmm with one 4 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note:3core of 4 sqmm wire and casing caping is measured as one length

Taking down/out and opening of existing Exhaust fans 450 mm sweep size of any make etc refixing at the desired location, after reassembling and after sevicing/overhauling by thouroghly cleaning the shaft ,rotor,stator and applying lubricant/grease to bearing and one coat of super enamelled varnish over winding to improve the insulation resistance including repair/replacement of spare parts/materials connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 Mtr length including using material using material/parts of minor nature such as screws,nuts, bolts,washers etc including cleaning the metal surface,lubricant/greasing etc to make it functional etc complete all as specified and directed by Engineer-in-charge.

Taking out and opening of existing Exhaust fans 450 mm sweep size of any make etc from the desired location, removing burnt out defective unserviceable winding & rewinding with appropriate size of super enamelled copper wire including varnishing, drying etc,reassembling and fixing at the desired location after replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 Mtr length including using material using material/parts of minor nature such as screws,nuts, bolts,washers etc including cleaning the metal surface,lubricant/greasing etc to make it functional etc complete all as specified and directed by Engineer-in-charge

Supply and fixing in replacement of suitable bearing in repair of exhaust fanof 450mm sweep size all as specified and directed by Engineer-in -Charge

Supply and fixing in replacement of suitable condensor 4 mfd,250 Volts,AC in repair of exhaust fan of 450mm sweep size all as specified and directed by Engineer-in -Charge

Material and Labour for preparation of exhaust fans 450 mm sweep of any make by cleaning of metal surfaces including painting with spray painting to required gloss with white synthetic enamel paint to complete body of fans and writing MES No. With black paint etc complete all as specified and directed by Engineer-in-charge

Material and labour for submain wiring in PVC Conduit Pipe FRLS PVC insulated copper conductor wire of size 2x1.5 sqmm+1x1.5 sqmm earth wire complete all as specified and directed by Engineer-in-charge

Material and labour for submain wiring in PVC Conduit Pipe FRLS PVC insulated 3 Corecopper conductor wire of size 2x2.5 sqmm+1x2.5 sqmm earth wire complete all as specified and directed by Engineer-in-Charge

Supply and fixing open well submersible pump of 2 HP,single phase,230V,50 Hz complete all as specified and directed by Engineer-in-Charge

M & L for Supply,laying ,connecting ,testing and commissioning and jointing , LT underground cable in replacement ,1100 volts grade, XLPE insulated, armored with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp complete all as specified and as directed by the Engineer-in-Charge of Sizes 10 Sqmm, 4 core.

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth and getting out in hard/dense soil etc complete all as specified and directed by Engineer-in-Charge

Returnig, filling in including spreading, levelling, watering and well ramming in layers, n exc 25 cm thick in soil etc complete all as specified and directed by Engineer-in-Charge

Removing exacavated soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and directed by Engineer-in-Charge

Supply &lay HDPE pipe 50 mm bore for laying of LT cable complete with all accessores etc complete all as specified and directed by Engineer-in-Charge

M&L Factory made Outdoor type Panel, made out of 16SWG CRCA Sheet, Powder coated, Weather Proof,Front Opening Shutter with proper Locking Arrangement,suitable for Totally Enclosed complete and grouting in cement concrete 1:2:4(20 mm graded stone aggregate) work of suitable size including necessary Electric connection and Testing,Comprising with the following including Taking down unserviceable Panel,complete all as specified and as directed: (a) Copper Bus-bar 4 strip, 450mm long, 100 Amps, 415 Volt- 01 Set (b)Incoming TPN 63 Amps, 16 KA-01 (c)Outgoing MCB SPN, 10KA-04 (d)Digital Voltmeter-01,Digital Ammeter with CT-01 (e)S&F DOL Starter for 2HP open well submersible pump

S&F Insulating electrical rubber mats of size(1 Mtr x 2 Mtrs) and thickness 8 mm complete all as specified and directed by Engineer-in-Charge.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts & washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using granded stone aggregate and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC, both way, lifting arrangement complete including all necessary earth work etc complete all as specified and directed by Engineer-in-Charge

Overall size, shape & Design of cupboard shall be as shown on drawing. Plywood should be 18 mm thick commercial Plywood BWR Grade. All exposed surface should be Laminate by Sunmica Sheet colour of sheet shall be decided by GE. All door should be provided good quality suitable Brass handle, Magnet & Chitkili. Note: Entire work shall be done at on ground.

M/S. YADAV ENTERPRISES

NATHKRUPA CONSTRUCTION

MATOSHREE CONSTRUCTION

M/s Meher Construction

M/s IBEX Engineers and Contractors

Ms. M.D. Auty

M/s A G Gund

MS. A.S. CONSTRUCTION