80966 Special Repairs to Internal roads at Vijay Baugh under GE Haddo

Amount

Repair to pot holes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth, making good by applying a tack coat @ 5 Kg/ 10Sqm , putting in premixed bituminous macadam , well rammed and sealed with binder 9.8 Kg / 10Sqm ,blinded with 0.09Cum of stone chippings 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of holes exceeding 30mm.

M&L for Premixed bituminous macadam from hot mix plant with minimum 4% binder content by weight of total mix using paving bitumen of grade VG-30, laid/rolled with power road roller 8 to 12 Tone capacity and compacted to required gradient and camber (consolidated thickness 75mm or less) all as specified and directed.

M&L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed..

M&L for applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sqm using paving bitumen on black top surfaces complete all as specified and directed.

M&L for Bituminous premix semi dense asphaltic concrete, 40mm consolidated thickness with 5.5% of binder content using paving bitumen laid rolled and compacted with power road roller of 8 to 12 Ton capacity to required camber and gradient, complete all as specified. NOTE: Minimum Bitumen content shall be 5.5% as specified here in above if the actual quantity of bitumen to be incorporated on approval of Mix-Design is found more than the minimum bitumen content specified above, No price adjustment shall be made for actual bitumen content of Mix-Design.

M&L for providing 2.5mm (minimum) thick road marking strips (Retro-reflective) of specified shade/colour using hot thermoplastic material with fully automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heaters, driven by skilled operator on road surfaces including necessary T&P, including cleaning the road surface off all dirt, scales, oil, grease and foreign materials etc complete all as per manufacturer instructions and all as specified and as directed by the Engineer-in-charge. [Make: STP/ Reliance Thermoplast/ 3M]

S&F in repairs Dual directional CAT Eyes (Road Studs) of size 110mm x 126mmx 29mm made out of ABS (Astrontrilte Butadene Styrene) engineering plastic dynamically designed having high impact strength and fitted with 2 nos highly reflective reflectors panel of Amber Red or white on both sides, approximately 248 gram weight fixed with suitable adhesive conforming relevant IS and all as per manufacturer's complete all as specified and as directed by the Engineer-in-Charge. [ Make: Protek/ Swareflex/ Dark Eye/ 3M]

S&F in repairs providing solar stud of width 122.5m, length 132.5mm, height with stump 55mm, stump dia 26mm electronically operated with solar cell LED PCS,Ni-Cd 1.2V/1600MA Battery with aluminium main frame bottom frame aluminium, reflective in two opposite direction and fixed in road surface as per manufacturer instructions or as directed (Make : Dhruv of Dark Eye, TAT BP Solar)

S&F i repairs road side delineators made out of MS pipe 50mm dia total height of 1050mm black powder coating media at top disc of micro prismatic reflector colour protected by powder coated MS mesh and high intensity grade reflection all as directed.(Make:3M or equivalent approved make

S&F in repairs for 32 inches (80cm) dia polycarbonate convex mirror fibre moulded water proof and weather proof with pole moulded bracket all as specified (Make : Dhruv of Dark Eye, TAT BP Solar or equivalent)

M&L Cement concrete type C2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete all as specified.

M&L Pre-cast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate)with solid blocks, exc, 10 cm in width and setting in mortar 1:6 complete all as specified and as directed.

M&L rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth (without using extra cement) complete all as specified.

M&L painting to brick stone concrete or plaster surface applying 2 coats of synthetic enamel paint over 1 coat of primer including preparation of surface

Excavation in post holes (or similar holes) each n. exc 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc exc 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface as in soft/loose soil all as specified.

M&L for cement concrete Type B-2, 1:2:4 (using 40 mm graded stone aggregate) in post foundation, filling and mass concrete all as specified.

S&F in repairs stainless steel pipe of 304 grade, 65mm dia with wall thickness not less than 2.5mm as in post, support etc, erected in position all as specified.

S&F in repairs stainless steel pipe of 304 grade, 40mm tube with wall thickness not less than 1.25mm as in framed work including stainless steel seamless welding all as specified.

S&F in repairs stainless steel pipe of 304 grade, 25mm dia with wall thickness not less than 1.25mm in cut pieces including stainless steel seamless welding to SS framed and SS pole all as specified.

S&F in repairs stainless steel square tube of 304 grade, 20mm size with wall thickness not less than 1.25mm as in framed grid work including stainless steel seamless welding to SS framed and SS pole all as specified.

S&F in repairs stainless steel of 304 grade, ornamental type cap suitable for coping/head 65mm dia stainless steel pipe including stainless steel tack seamless welding to SS pole all as specified.

M&L for 3mm thick aluminum sheet (ACP Panel) finished fixed in grid frame work of stainless steel composite sections/ panels with stainless steel rivets to approved size including necessary drilling etc, of sizes and spacing as per manufacturers instructions complete including filling up joints with silicon sealant etc. lengths of sheets as customized at site of work and of shades as required complete all as specified.

Supply and paste on Aluminium composite board/panel with self adhesive diamond grade retro reflective sheet of blue colour all as specified.

Supply and pasting on board computerized designed alphabets /writing letter/figures in (Block, Roman, Italic style or in Indian languages)/ holograms etc crafted from self adhesive diamond grade retro reflective sheet of white colour all as per directed by Engineer-in -charge and size :-

5mm to 20mm wide and 30mm to 50mm height

5mm to 20mm wide and 50mm to 80mm height

20mm to 35mm wide and 50mm to 100mm height

20mm to 35mm wide and 100mm to 150mm height

35mm to 50mm wide and 100mm to 150mm height

35mm to 50mm wide and 150mm to 200mm height

50mm to 75mm wide and 100mm to 200mm height

75mm to 100mm wide and 100mm to 200 mm height

75mm to 100mm wide and 300mm to 500 mm height

Note:- The size of hyphens, commons, stops , dashes and brackets shall be corresponding to size of alphabets / figures / board.

Supply and pasting on board computerized designed index hands (natural size) /arrows / holograms etc crafted from self adhesive diamond grade retro reflective sheet of white colour and shall be corresponding to size of alphabets/ figures/ board all as specified.

Supply and pasting on board computerized designed emblems / holograms etc crafted from self adhesive diamond grade retro reflective sheet of white colour and shall be corresponding to size of alphabets/ figures/ board all as specified.

Supply and pasting on board with computerized location plans / area plans / site plans / layout plans / sketches / symbols etc crafted from self adhesive diamond grade retro reflective sheets with aborted size Alphabets, figures, dashes, arrows, brackets etc as per sample kept in GE office.(area of sheet exc 1.85 sqm each)

Supply and pasting of diamond grade retro reflective tape/sheet with self adhesive on the board (Tape or sheet wide 25mm to 40mm )

Prasur Electricals & Engineering Co.