SPL REPAIR TO LEEKAGE SEEPAGE FLOORING ETC IN BLDG NO T 47 AT 733 FD WKSP COY AND CERTAIN OTHER SANCTIONED WORKS UNDER GE SUKNA

Amount

BOQ Part-I (B/R Work)

Dismantling unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 Sqcm in sectio, in any position complete all as specified and directed.

Dismantling unframed timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed.

Dismantling wrought iron or mild steel / structural steel work of any description not otherwise provided for complete all as specified and directed.

S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1998 grade St.-240 complete all as specified and directed.

S&F rolled mild steel in plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410W (Gde-E-250) quality-A complete all as specified and directed.

S&F mild steel screw bolts diameter of neck 16 to 20 mm (machine made) with hexoganal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc. 22.5 cm but not exc. 30 cm long complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any guage, thickness including nanital or similar pattern roof coverings complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd

All as per Sl item No. 1.08 above but plain steel sheet.

M&L PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in gap between roof sheet and brick wall, thickness of concrete bed exc. 5 cm and not exc. 10 cm thick & width not exc. width of one brick thick wall including necessary scaffolding and formwork complete all as specified and directed.

S&F 4 mm thick non asbestos fibre cement building boards (designer pattern) fixed or laid / inserted to aluminium framework with screws in false ceiling (flat or sloping) of grid size 605 x 605 mm and including anodised aluminium snap grid frame work for false ceiling hanging from structural steel / scantling with 6 mm GI wire & dismantling complete all as specified and directed. Make of boards:- Everest / Visaka Industries / Lafarge / Armstrong Make of aluminium snap grid:- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products

Demolition of brick work or stone / boulder masonry, built in cement mortar and including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed.

All as per Sl item No. 1.13 above but except bricks. Note:- Serviceable quantity of bricks obtained from demolition shall be reused under this item.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall and including provision of 02 Nos. 8 mm dia TMT bars in full length of wall at every fourth course complete all as specified and directed.

All as per Sl item No. 1.15 above but except bricks. Note:- Serviceable quantity of bricks obtained from demolition shall be reused under this item.

Taking down cement plaster on brick or concrete surfaces / ceiling, racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface using water proofing compound as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and directed. Make:- Fosroc chemicals / STP Ltd / M/s Sika India Ltd / Hindcon Chemicals Limited / M/s IWL Limited

M&L preparation of new plastered wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over wall care putty (1 to 2 mm thick) to obtain smooth finish complete all as specified and directed. Make of oil bound distemper :- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints

M&L preparation of new plastered wall surfaces and inlcuding applying three coats of white wash complete all as specified and directed. Make :- Rajasthan / Apple / Surya

M&L preparation of new plastered wall surfaces and including applying two coats of cement base paint over a coat of primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints

M&L preparation of new plastered wall surfaces and including applying two coats of exterior weather coat paint over a coat of primer complete all as specified and directed. Make:- Royal acrylic (crimson paints pvt ltd) / Dulax / shalimar paints ltd (Extra maximum ultra) / Berger paints ltd (weather coat) / Asian paints ltd (Appex ultima) / Jotun India pvt ltd

M&L preparation of old decorated wall surface and including applying one coat of oil bound distemper complete all as specified and directed. Make:- Bison (Berger) / Tractor (Asian) / ICI (Super Cote)

All as per Sl item No 1.25 above but on ceiling surfaces.

M&L preparation of old decorated wall surfaces and including applying one coat of weather coat acrylic exterior emulsion paint complete all as specified and directed. Make:- Royal acrylic (crimson paints pvt ltd) / Dulax / shalimar paints ltd (Extra maximum ultra) / Berger paints ltd (weather coat) / Asian paints ltd (Appex ultima) / Jotun India pvt ltd

M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over wall care putty (1 to 2 mm thick) to obtain smooth finish complete all as specified and directed. Make of oil bound distemper:- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints

M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of cement base paint over a coat of primer complete all as specified and directed. Make:- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints

M&L preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

M&L preparation of new steel surfaces of any description not exceeding 10 cm width or girth when unconnected with other painting or when painted in a different tint and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L coloured glazed ceramic tiles 300 x 450 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles)

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 complete all as specified and directed. Make:- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 complete all as specified and directed. Make:- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) Orient Bell Ltd / H & R Johnson India Ltd

All as per Sl item No 1.36 above but in skirting / dado etc. laid over and including screed bed 10 mm thick in CM 1:3.

M&L 16-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like laid over and including screed bed 15 mm thick in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and complete all as specified and directed.

M&L cement concrete chequered tiles 300 x 300 x 25 mm thick as in floors, set and jointed over and including 15 mm thick screed bed in CM 1:4 and pointed in grey cement and pigments to match the colour of tile complete all as specified and directed. Make : Lovely / Anjali / Ultra / Bansal / Nitco / Multiwyn

M&L hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. Note:- Consolidated thickness shall only be measured and paid.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 50 mm thick, PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in floors complete all as specified and directed.

M&L 75 mm thick, PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in floors, paths, plinth protection, hardstanding etc. complete all as specified and directed.

M&L 75 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etc, complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in surface channel and drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc.complete all as specified and directed.

Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.

All as per Sl item No. 1.50 above but exc 1.5 m & not exc 3.0 m in depth

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

All as per Sl item No 1.54 above but exc. 1.5 Sqm but not exc. 4.0 Sqm each

Taking down shutters of any description not exc 1.0 Sqm each complete all as specified and as directed.

All as per Sl item No 1.56 above but exc 1.0 Sqm but not exc 2.0 Sqm each

S&F 125 x 60 mm size pressed steel door frames for doors with one or more rebates and including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri

S&F 30 mm thick factory made flush door shutters solid core construction, with block board core and plywood face fanels, commercial type on both side complete all as specified and directed. Make:- M/s Jain Doors Pvt Ltd (Woodify) / M/s Sylvan Plyboard (India) Pvt. Ltd (Sylvan Ply) / M/s Sri Bhawani Plyboard Industry / M/s A-1 Teak Products Pvt Ltd / M/s Vidya Ply & Board Pvt Ltd / M/s SA Plywood Industry (P) Ltd (GLOBE)

S&F 30 mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc.; size of members of shutter as specified in SSR part-I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Species of timber :- Gamari (Gnelina arborea) / Chickerassy (Chukrasia Tabularis) / Siris (Albizzia procera) / Kalasiris (Albizzia Odoratissima)

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing (SSR - 2020 Part-II Rates) complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top rails, bottom rails stiles & lock rail. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with grade of steel conforming to Fe - 410 - W (Gde E - 250) Quality - A complete all as specified and directed.

S&F steel window with side hung shutter and including box type hinges steel handle and steel peg stay with glazing bars dovetailed or welded complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri

All as per Sl item No 1.64 above but without glazing bars

S&F steel ventilator with top hung shutter and including hinges steel peg stay complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri

S&F aluminium anodised powder coated frame work (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates and including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and directed. Make:- M/s Halco Aluminium Extrusion / M/s Bhagwati Sai Metal Alloys / M/s Argent Industries

S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington

All as per Sl item No. 1.69 above but 4 mm thick sheet glass

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples and including wooden beads complete all as specified and directed.

M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in bed plates, filling in pressed steel door frames, hold fast blocks etc, complete all as specified and directed.

S&F 100 mm butt hinge, medium weight, cold rolled mild steel complete all as specified and directed. Make:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison

S&F 250 mm long mild steel sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. Make:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison

S&F 200 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries

S&F 100 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries

S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M&L RCC 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregate) in beams cantilevers, bressummers lintels over 1.5m span including demolition complete all as specified and directed.

M&L RCC 1:1.5:3 Type A1 (20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like and including demolition complete all as specified and as directed.

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per Sl item No. 1.83 above but 6 to 8 mm dia.

All as per Sl item No. 1.83 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders.

S&F in repairs 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed. Make - Tata / Jindal Steel / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd

All as per Sl item No 1.86 above but 20 mm bore.

M&L cutting chases in brick wall, pinning in. making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc. 10 cm girth complete all as specified and directed.

S&F in repairs 15 mm bore bib tap chromium plated fancy type, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repairs 15 mm bore fancy type, chromium plated, stop valves, concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repairs angle stop cock 15 mm bore, cast copper alloy, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or unions and fixed, fancy type, chromium plated long thread with flange complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

All as per Sl item No. 1.91 above but two way angular stop cock. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repairs health faucet 15 mm bore, ABS chromium plated with & including 1.0 mtr chromium plated flexible tube & wall hook complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repairs towel rail, 18 mm (minimum) dia & 600 mm long of stainless steel chromium plated, fixed with and including chromium plated brass screws and wooden / plastic cleat complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repairs 100 mm size swivel shower rose of ABS, chromium plated with long head arm for fixing with 15 mm pipe complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. Make:- Kirloskar / Leader / Zoloto / Venus / Audco / Upadhyaya

S&F in repairs central hole basin mixer, brass, chromium plated, for mixing hot and cold water, with 450 mm Long Braided Hoses, screwed down for 15 mm bore pipe complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, size not less than 125 mm wide & 450 mm long, with ABS chromium plated bracket guard and railing complete all as specified and directed. Make:- Prayag / Essco / Hindware (Less Italian Collection) / Cera (Med Range)

S&F soap dish stainless steel body, glossy finish, fixed to plugs with chromium plated brass screws complete all as specified and directed. Make:- Prayag / Essco / Hindware (Less Italian Collection) / Cera (Med Range)

S&F in repairs grating doom 100 mm dia of PTMT (minimum weight 25 gms) fixed to floor trap complete all as specified and directed. Make:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F in repair 100 mm dia grating, doom type, chromium plated, with or without waste hole, fixed to floor trap complete all as specified and as directed. Make :- Prayag, Cat No. - FT-03 / FT-04 or equivalent in Essco / Hindware (Less Italian Collection) / Cera (Med Range)

S&F in repairs PVC connections 15 mm size with PTMT nuts, of length 450 mm complete all as specified and directed. Make:- Prayag Cat No.- 323-TK or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F in repairs 32 mm bore PVC waste pipe for WHB / Sink etc. complete all as specified and directed. Make:- Prayag Cat No - 327 or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F in repairs vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, CP waste fitting and cutting for and pinning in ends of brackets etc, complete all as specified and directed. Make of wash hand basin:- Hindware, Cat No. - 10010 (Starwhite) or equivalent in Cera (Med Range) / Essco Make of waste fitting - Prayag Cat No.- BEA-10 or equivalent in Essco / Hindware (Less Italian Collection ) / Cera (Med Range) Make of PVC waste pipe - Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F in repairs vitreous china european water closet pan (pedestal pattern) white in colour with fixing bolts and flush pipe, connection to trap and to flushing cistern and all joints, including plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges complete all as specified and directed. Make of Water Closet:- Hindware, Cat No. - 20011 (Starwhite) or equivalent in Cera (Med Range) / Essco Make of Seat cover:- Hindware, Model - Seat Cover Standard (Starwhite) or equivalent in Cera (Med Range) / Essco

S&F in repairs PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets & 32 mm dia PVC flush bend pipe complete all as specified and directed. Make of Cistern:- Hindware, Model - Sleek Essence Single Flush (Starwhite) or equivalent in Cera (Med Range) / Essco Make of Bend Pipe:- Hindware (Less Italian Collection) / Cera (Med Range) / Essco

S&F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 x 460mm bowl size 405 x 355 x 178 mm complete all as specified and directed. Make:- M/s Prabhat Sanitary Pvt Ltd (Brand IDOOS) / M/s Bluestar Sanitary Industries Pvt Ltd / M/s JMD International (Brand D-sons)

S&F kitchen plate rack made out of 0.63 mm stainless steel sheet & of size not less than 24" x 30" x 10", standard quality fixed with brass screw complete all as specified and directed.

All as per Sl item No. 2.09 above but in repairs & of size not less than 31" x 30" x 10"

S&F in repairs 20 mm dia curtain rod mild steel with decorative wooden finish complete all as specified and directed.

S&F decorative polished wooden brackets, supports for holding curtain rods or corners to be fixed at ends suitable for curtain rod of 20 mm dia with necessary screws complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tanks of 1000 Litres capacity, multilayered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed. Make of tank:- Sintex / Polycon / Oriplast / Jindal Make of ball valve:- Prayag M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F in repairs PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited

All as per Sl item No. 2.15 above but 110 mm bore.

S&F PVC (SWR) 75 mm bore bend of any radius complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited

S&F PVC (SWR) 110 mm bore bend with access door, of any radius complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited

S&F 110 mm bore PVC (SWR) junction double, (double T) equal or unequal with access door complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited

S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating and including jointing with solvent cement complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited

S&F in repairs PVC (SWR) gully trap of 125 / 110 mm, setting and jointing with solvent cement and including top cover complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited

M&L for PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

S&F 150 mm bore salt glazed stone ware (SGSW) drain pipes grade 'A' laid in trenches & jointed in CM 1:1 and tested complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, bore of pipe 150 mm complete all as specified and as directed.

M&L welded steel wire fabric square mesh supplied and fixed complete to wood or steel members, weight not exc. 4 kg per square metre complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails or screws complete all as specified and as directed.

S&F 9 mm thick prelaminated single side coloured celluka ply (PVC), density not less than 500Kg/m3, in drawer of cupboard, shelf etc. fixed with screws, adhesive etc, complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd

All as per Sl item No 2.29 above but 12 mm thick.

All as per Sl item No 2.29 above but 30 mm thick.

S&F 40 mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F in repairs 75mm stainless steel handle bow type complete all as specified and directed.

S&F magnetic catch of size not less than 40 x 15 mm suitable for cup board complete all as specified and directed.

S&F 10 mm thick PVC insulation panel with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n. exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre and necessary hangers 6 mm dia GI fixed to roof and complete all as specified and directed. Make of GI Grid- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products Make of PVC Insulation Panel :- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd

M&L for 5 mm thick solid plain PVC sheet (min density 600 Kg/Cum) wall panelling, panels stuck on & including framework made out of 5 mm thick & 50 mm wide PVC strips (min density 600 Kg/Cum) fixed to wall vertically at 250 mm centre to centre & horizontally at 600mm centre to centre. PVC strips shall have 6 mm wide and 1 mm deep grooves in their centre for sinking the head of the screw & shall be fixed to wall using 65 mm long MS screws & PVC fasteners at a max distance of 200 mm centre to centre. PVC sheet panel shall be fixed to PVC strip framework using solvent cement & jointing of two PVC sheet panel shall only be done above PVC strip. Minimum size of one PVC sheet panel shall be 1220 (L) x 2440 (H) mm, however in case of complete height of wall panelling is more than 2440 mm, PVC sheet panel of length 1220 mm and balance height shall be fixed above lower panels complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd

S&F kitchen basket of size not less than 17" x 20" x 4", made out of chromium plated stainless steel wire & perforated sheet of grade SS 304, suitable for cutlery with and including a pair of suitable telescopic ball bearing drawer channels for mounting basket & ncecessary screw / bolts complete all as directed.

S&F kitchen basket of size not less than 17" x 20" x 4", made out of chromium plated stainless steel wire of grade SS 304, suitable for cup and saucer with and including a pair of suitable telescopic ball bearing drawer channels for mounting basket & ncecessary screw / bolts complete all as directed.

S&F kitchen plain basket of size not less than 17" x 20" x 6", made out of chromium plated stainless steel wire of grade SS 304, with and including a pair of suitable telescopic ball bearing drawer channels for mounting basket & ncecessary screw / bolts complete all as directed.

S&F kitchen basket of size not less than 17" x 20" x 8", made out of chromium plated stainless steel wire of grade SS 304, suitable for thali with and including a pair of suitable telescopic ball bearing drawer channels for mounting basket & ncecessary screw / bolts complete all as directed.

S&F kitchen two shelf pull out basket of size not less than 8" x 20" x 17", made out of chromium plated stainless steel wire of grade SS 304, with and including a pair of suitable telescopic ball bearing drawer channels for mounting basket & ncecessary screw / bolts complete all as directed.

BOQ Part-II (E/M Work)

M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including modular metal flush box & modular white cover plate with frame of required module for mounting or housing switches, socket outlets, fan regulators, etc. incuding blankng plates & all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch and including cutting chasing (as required) and making good surfaces to match with adjoining surface & taking down complete all as specified and directed. Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)

All as per Sl. item No. 3.01 above but for one 5 / 6 Amps socket outlet point on independent board.

All as per Sl. item No. 3.01 above but for one 5 / 6 Amps socket outlet point on same board.

M&L point wiring with 2.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non metallic PVC conduit (medium grade) concealed in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including modular metal flush box, modular white cover plate with frame of required module, blankng plates & all other fixing accessories for 15 / 16 Amps socket outlet on independent board and including cutting chasing (as required) and making good surfaces to match with adjoining surface including taking down complete all as specified and directed. Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)

S&F modular switch 1 way 6A, 1 module, white complete all as specified and directed. Make:- Havells (IVY & IRENE) / Panasonic (Vision & ROMA) / C&S

All as per Sl item No. 3.05 above but 16 Amps.

S&F modular socket outlet, 6A - 2/3 pin combined 2 module, white complete all as specified and directed. Make:- Havells (IVY & IRENE) / Panasonic (Vision & ROMA) / C&S

All as per Sl item No. 3.07 above but 6 / 16 Amps.

S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed. Make:- Havells / Anchor / Legrand

S&F angular lamp holder, PVC / Polycarbonate type with back plate for fixing of retrofit lamp 240 volt including taking down complete all as specified and as directed. Make :- Havells / Anchor / Legrand

S&F electronic modular fan regulator, stepped type, white 120 W - 2 module complete all as specified and directed. Make :- Havells (IVY & IRENE) / Panasonic (Vision & ROMA) / C&S

S&F MCB SP 6 to 32 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. Make :- L&T / Havells (Brand-Max³, EURO-II) / Panasonic / Hager / ABB / Legrand

All as per items No 3.12 above but MCB SPN.

All as per items No 3.12 above but MCB SPN 40 to 63 Amp.

S&F blanking plate, suitable for distribution boards complete all as specified and directed. Make :- L&T / Havells / Panasonic / Hager / ABB / Legrand

S&F metal plug and socket DB, double pole 240 volts and including one 20 Amp MCB SPN, C-Curve & complete all as specified and directed. Make :- L&T / Havells / Panasonic / Hager / ABB / Legrand

S&F in repairs bus bar chamber, 4 way, 200A, outdoor type with & including enclosure, busbars, fixing on pole with all nut-bolt, clamps and electrically connecting complete all as directed. Make :- Havells, IHBC020004 or equivalent in L&T / Panasonic / Hager / ABB / Legrand

S&F MCB protected power unit with enclosure suitable for flush mounting including 25 amp socket, 3 pin plug and one MCB DP and starter 25 Amp, 10 kA, 240V 'C' curve inlcuding taking down complete all as specified and as directed. Make :- Havells, Model - DHDUCDP0253016-25 or equivqalent in L&T / Panasonic / Hager / ABB / Legrand

S&F MCB DB, SPN 12 way, IP-30, IK09, single door type, with 100A copper neutral and earth bus bar for fixing MCB including taking down, fixed flush to wall & making good the disturbed surfaces complete all as specified and directed. Make:- L&T / Havells / Panasonic / Hager / ABB / Legrand

S&F MCB DB, SPN 8 way, IP-43, IK 09, double door type with metal door, with 100A copper neutral and earth bus bar for fixing MCB including taking down, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed. Make :- L&T / Havells / Panasonic / Hager / ABB / Legrand

S&F VTPN DB, 6 way, IP-30, IK 09, with 250 A copper neutral and earth bus bar, suitable for fixing upto 160 Amp MCCBs as incomer including taking down, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed. Make :- L&T / Havells / Panasonic / Hager / ABB / Legrand

S&F MCCB 4 pole 160 Amps breaking capacity 16 KA, Ics = 100% Icu including spreader link complete all as specified and directed. Make :- L&T / Havells (Brand- HIM & HIX) / Panasonic / Hager / ABB / Legrand

S&F MCCB 4 pole 100 Amp, breaking capacity 25 kA, Ics = 100% Icu, including spreader link & taking down complete all as specified and as directed. Make :- L&T / Havells (Brand- HIM & HIX) / Panasonic / Hager / ABB / Legrand

All as per Sl item No. 3.23 above but 250 Amp, breaking capacity 36 kA.

All as per Sl item No. 3.23 above but 400 Amp, breaking capacity 36 kA.

M & L concealed sub main wiring with 2 runs of 2.5 sqmm main wire along with 1 run of 2.5 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same & taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)

All as per item No. 3.26 above but with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire.

All as per item No. 3.26 above but with 2 runs of 6 sqmm main wire along with 1 run of 6 sqmm earth wire.

M & L for sub main wiring with 2 runs of 4 sqmm main wire alongwith 1 run of 4 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade copper conductor cable, drawn through and including adequate size PVC casing caping (double lock pattern) with all fittings & accessories on walls / ceiling surfaces etc., complete all as specified and directed. NOTE :- Two runs of main copper conductor, one run of earth wire and one run of PVC casing caping shall be measured as one unit length. Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Casing Caping:- Richa Cables / AKG Industries / Harsh Electro Systems

S&F 9 / 10 watt LED Bulk head fitting including electronic driver and SMD LED lamp, polycarbonate housing & opal polycarbonate diffuser, Lumen Efficacy 100 Lm/Watt (minimum), colour temperature 5700K (minimum), CRI 80 (minimum), IP-65, PF 0.95 (minimum), THD 10% (maximum), in-built surge protection 5 KV (minimum) including electrically connecting from celing rose to light fitting and taking down complete all as specified and directed. Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells

S&F LED light fitting 1 x 20 watt batten type 230 Volts, extruded aluminium housing, with luminous efficacy, 100 lumen / watt (minimum), suitable for surface mounting, with integrated high effeciency driver etc. all electrical accessories, pre-wired upto terminal block, fixed with 02 Nos of PVC round / square blocks, screws etc. inlcuding electrically connecting & taking down complete all as specified and directed. Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells

S&F 1 x 34 / 36 watt, LED Panel light fitting, square shape (2ft x 2ft), suitable for recess mounting in ceiling, Epoxy white powder coated, die cast aluminium housing & opal acrylic diffuser, colour temperature 5700K (minimum), 230 Volts, total system lumen 3600 Lm (minimum), CRI 80 (minimum), IP 20, PF 0.95 (minimum), THD 20% (Maximum), with integrated high effeciency electrnoic driver with APFC, inbuilt surge protection 2 KV (minimum), inlcuding electrically connecting & taking down complete all as specified and directed. Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells

S&F LED light fitting 1 x 9 / 10 watt, 230 Volts, 2 feet long, extruded aluminium housing & extruded polycarbonate diffuser, suitable for surface mounting, system efficacy 100 Lm/watt (minimum), colour temperature 5700K (minimum), CRI 80 (minimum), PF 0.90 (minimum), THD 10% (Maximum), with integrated high effeciency electrnoic driver with APFC, in-built surge protection 5 KV (minimum) inlcuding all fixing arrangement, electrically connecting from ceiling rose to light fitting & taking down complete all as specified and directed. Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells

S&F 1 x 15 / 16 watt, LED down light fitting, square shape, suitable for recess mounting, extruded polycarbonate housing & extruded polycarbonate diffuser, colour temperature 5700K (minimum), 230 Volts, lumen efficacy 100 Lm/watt (minimum), CRI 80 (minimum), PF 0.90 (minimum), THD 20% (Maximum), with integrated high effeciency electrnoic driver with APFC, inbuilt surge protection 2 KV (minimum), inlcuding electrically connecting & taking down complete all as specified and directed. Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells

S&F ceiling fan 1200 mm (minimum) sweep, BEE 5 star rated, with BLDC technology, AC single phase 230 V, 350 RPM, air delivery 220 m³/minute (minimum), with and including smart remote with long lasting batteries to control speed etc., suspended from fan hook and including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 Sqmm copper conductor from ceiling rose to ceiling fan including taking down complete all as specified and directed. Make :- Havells, Model - EFFICIENCIA NEO or equivalent in Orient / Ram Ratna Electricals Ltd (RRE) Note:- Old ceiling fan shall be deposited to MES store.

S&F in repairs exhaust fan 250 mm sweep, non metallic plastic body, AC single phase, 230 V, 50Hz with & including self closing louvers, nuts, screws, bolts of specified sizes, electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75 sqmm copper conductor from ceiling rose to exhaust fan and writing MES number in 2 cm height with synthetic enamel paint complete all as specified and as directed. Make :- Havells, VentilAir - DX or equivalent in Orient / Ram Ratna Electricals Ltd (RRE)

S&F geyser of capacity 25 Litres, 230V, 50Hz, vertical, wall mounted type, BEE 5 star rated, ABS outer body, inner tank with vitreous enamel coated, incoloy glass coated heating element, adjustable thermostat for temperature regulation, multifunctional safety valve with & including 3 core copper cable of 1 to 2 metre length with 3-pin plug of 16A capacity, fixing arrangement such as. bracket, nuts, bolts washers etc. including taking down complete all as specified and directed. Make:- V-Guard / Bajaj / Usha / Crompton Greaves / Jaquar & Company Pvt. Ltd.

Taking out existing XLPE Cable of any size in underground / alongwith pole or in any positon, removing materials to store for keeping in safe custody or for taking credit complete all as specified and as directed. Note:- Excavation and earthwork (if required) shall be measured and paid seperately.

Dismantling of overhead aluminium conductor, steel reinforced (ACSR) or AAC conductors complete all as specified and directed.

Dismantling insulators from poles of any type & any size complete all as specified and directed.

Dismantling cross arms of MS channel or angle sections etc, complete all as specified and directed.

Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 95 Sqmm x 3.5 Core, fixed on pole and including necessary hook and clamp complete all as specified and directed. Make :- Havells / KEI / Polycab

All as per Sl item No. 3.42 above but 120 Sqmm x 3.5 Core.

Supply only fuse wire, tinned copper of 5 to 10 A capaity complete all as specified and directed.

S&F in repairs aluminium parallel groove clamp, heavy duty with double nut and bolts, suitable for holding wire upto 14mm dia complete all as specified and directed.

M&L for jumpering of HT / LT overhead line with 95 sqmm single core, XLPE insulated aluminium cable, length 2 metre, with necessary colour code including necessary aluminium lugs, nuts and bolts & taking down complete all as specified and directed.

Taking down existing unused insulator / gangs / clamps / brakcets of any description from LT / HT poles and depositing same to MES store yard complete all as directed.

M&L for redistribution of load of LT panels with necessary disconnection and connection of incoming and outgoing cables as required complete all as directed. Note:- Any material required shall be measured and paid seperately.

M&L for repairing doors (front and back both) of outdoor LT panels of size 0.9x0.9x0.5m to 1.8x1.5x0.5m including necessary nut bolts, welding / jointing complete all as directed.

Taking down unserviceable LT panels from existing locations under GE sukna and deposing the same to MES store yard complete all as directed.

S&F 1.5 TR capacity hi wall split type air conditioner units indoor / outdoor complete with cordless remote control unit and with in-built air ioniser and plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 complete all as specified and directed. Make:- Blue Star / Voltas / Hitachi / Daikin / Canters

S&F voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input voltage variation between 170 volt to 250 volt with output voltage stabilized at 230 volt with accuracy of +/- 2.5% and of capacity 3 KVA complete all as specified and directed. Make:- Vintek Electronics (VOLINA) / Live Line Electronics / Instruments & Equipment Co

M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and including dismantling complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.

M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to earth lead of galvanised iron strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point including dismantling complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 40 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.

S&F cubical type LT panel board, outdoor type, factory made from CPRI approved factory, having overall minimum dimensions 0.75 m (Breadth) X 0.90 m (Height) X 0.50 m (Depth), made out of 3.15 mm thick CRCA steel sheet and including MS angle iron 50 x 50 x 5 mm frame work, legs 0.6 m long, MC 100 channel base, totally enclosed, dust & vermin proof using neoprene rubber gasket (IP-54), double leaf door shutter in front side and single leaf shutter in rear side fixed with hinges having necessary locking arrangement in both front and rear door, with four side projected slanting roof, provided with louvers for ventilation / heat dissipation, duly powder coated of approved shade over a coat of red oxide primer both internally and externally and including mounting on PCC platform made out of PCC 1:3:6, 150 mm thick (100 mm below & 50 mm above GL) all round the panel board and including necessary earth work. (Item Contd...)

The panel board shall be suitable for operation on AC 415 Volt, 3 Phase, 50 Hz, 4 wire system and shall have 04 nos tinned aluminium bus bar of 350 Amps capacity with colour insulating tape / sleeves, mounted on suitable size "F" class, non hygroscopic, non combustible insulators, provision for fixing MCCBs / MCBs, necessary inter-connections with bus bar / strip with colour code insulation, provision of cable entry / exit provided in bottom, connections of all outgoing / incoming, existing / new copper wires of required size (minimum 2.5 sqmm) with following accessories and including taking down complete all as specified and directed:- Incoming :- (i) MCCB 4 pole 200 Amp, 25KA, Ics = 100% Icu including spreader link - 01 No. Instrumentation System :- (i) Phase indicator LED lamps (R, Y & B) with integral circuit (set of three) -01 Set (ii) Danger notice plate of size 20 x15 cm & 1.6mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size for LT - 1 No Make of MCCB :- L&T / Havells (Brand- HIM & HIX) / Panasonic / Hager / ABB / Legrand Make of Indicator Lamps :- L&T / Siemens / GE / RR Micro / BCH / Schneider

SHRI N.DAS

G C DUTTA N CO

PS ENTERPRISE

DEBABROTA ROY CHOWDHURY

MS ESSCON

M/S GLORIOUS CONSTRUCTION

R K UDYOG

S D CONSTRUCTION CO