Karnataka

Financial Eval

Works

Other Works

Construction of Multipurpose Fisheries Centre for Local Fishermen at Kodavooru in Malpe, Udupi Taluk & District.

Infrastructure Development Ports And Inland Water Transport Department

Executive engineer Udupi | udupi, Karnataka

Amount: ₹1.1 CrCloses: 26 Mar 2026Closed

Timeline

Published18 Mar 2026
Closed26 Mar 2026
Financial Evaluation—
Award—

Bids

1 Bid18 Mar 2026

#	Company	Amount	Status
1	PUNEETH KUMAR ₹98.5 Laccepted-finance	₹98.5 L	accepted-finance

Tender Value

₹1.1 Cr

EMD Value

₹2 L

Closing Date

26 Mar 2026, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Infrastructure Development Ports And Inland Water Transport Department

Contact Person

Bhanuprakash

Office Number

Mobile Number

Work Description

Construction of Multipurpose Fisheries Centre

Tender Information

Tender ID

IDD/2025-26/OW/WORK_INDENT168/CALL-2

Reference Number

IDD/2025-26/OW/WORK_INDENT168/CALL-2

Tender Type

Open

Product Category

Other Works

Form of Contract

Two Tender Document System(Two Cover)

Location

Executive engineer Udupi

Source Website

Subscribe to view

Documents Required

11 documents required · 9 mandatory · 2 optional

Technical Bid

RequiredAnnual Turnover Certificate

RequiredCompany Registration Certificate

OptionalReserved Category Certificate

OptionalSmall Scale Industries Certificate

RequiredRegistration Certificate

RequiredGST Declaration Certificates

RequiredTurnover Details -P&L, Balance sheet, IT returns filed details filed copy

RequiredLOC/Banker Certificate - In prescribed format only

RequiredSimilar Nature of Works done Certificate

RequiredAnnual Turnover Certificate

RequiredEXISTING & ON-GOING WORKS DETIALS

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The conditional Tender will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

The successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract.

Contractor should carryout additional test required to test the suitability of materials.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer- in-charge of this work.

Contractor should follow strictly the prevailing rules of labour act.

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

The cost of the Tender processing fees shall not be refundable.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, during office hours on all working days.

Materials like steel, cement etc., required for the work shall be procured by the tenderer themselves and should get tested by the quality control authority before use on the work at their own cost. Department will not supply any materials.

The contractors assessed available tender capacity will be calculated as per the clause 3.6 of kw-4 tender document Attached.

Formation levels and other data furnished are bare minimum the contractor should make all efforts to validate and to get additional data if required at his own cost.

All precautions should be taken by the contractor so that there are no damages to such public/ private properties. Also the Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client.

The tenderer should submit proposed methodology and program of construction backed with equipment and material planning, & deployment duly supported with broad calculation and quality management , plan, proposed to be adopted justifying their capability of execution and completion of the work as per technical specifications and within the stipulated period of completion.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-4 K.P.W.D. and further orders there on.

Contractors should be registered in KPWD class 3 and above

All scanned documents to be uploaded shall be in original and the same originals should be produced to the Executive Engineer (at the time of Technical Bid Opening) who reserves the right to verify the documents before approval.

Work shall be executed as per standard specifications.

Bidder should have valid Registration with Employees Provident Fund Organization under EPF and Miscellaneous Provisions Act, 1952. (Should Attach Latest Copies)

Work Done Certificates issued by not below the rank of Executive Engineer

Goods and Service Tax (GST), The contractor shall be allowed to bill GST complying with GST rules at prevailing rate in running account bill and for reimbursement by the Employer, Tax invoice is required to be submitted and Information in GST should appear/display.

GST will be paid separately as per Government Oder.

The Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delays as determined by the authority while granting the extension of time.

The Tenderer shall obtain the work done certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate/Certificates shall be produced at the time of opening of technical Bids for physical verification

The Tenderer shall scan the Original Ownership Documents/ Lease/ Hire commitment Agreement for the Machinery, Bank Guarantee and attach the scanned file to the Bid. The Original Documents shall be produced at the time of opening of technical Bids for physical verification

Bidders should quote the rate exclusive of GST only and GST Declaration Certificate Duly signed by contractor should upload in the portal

Estimate rates are excluding GST as per Common SR 2023-24 and prevailing GST (18% of Amount Put to tender) amount is kept in form of Lump sum in sanctioned estimate according to guidelines in Common SR (GO:PWD 51 RDF 2019 Bangaluru Dt:18.03.2022). Therefore, amount put to Tender and ECV amount are excluding GST. KPPP-PORTAL format has No Options to add GST Separately at stage of Draft Tender Schedule Process for Over All amount put to Tender, tender has been inviting through an Option with INCLUSIVE. But the item wise rates do not include GST. Hence, GST will be paid separately for the quoted amount accordingly. Declaration Certificate must be attached mandatorily.

The period for completion of the work is 6 months.

Contractor should establish their own Laboratory with qualified personnel.

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Past Experience

List of works for which tenders already submitted

Others -- List of Works

Satisfactorily completed (at least 90% of the Contract Value), as prime contractor, at least One similar work such as Building work of value not less than Rs.53.00 lakhs. (Usually not less than 50% of estimated value of contract)

Work Done Certificate

Executed in any one financial year, in the last five years, the following minimum quantities of work is RCC or PCC 218.00 Cum, TMT Steel 21.00 Tonne

Work Done Certificate

Capabilities of Vendor

Contractor should establish their own Laboratory with qualified personnel.

Others -- Site lab

Total value of civl engineering works executed and payments received in the last five years (year-wise)

Work Done Certificate

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Others -- Certificate copy of RC with Ownership, hire deed or purchase invoice with Latest Insurance copies

Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years

Audited CA Certificate of Annual Turnover

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Others -- Qualification and experience of the key technical and management personnel

Availability by owning at least 50% of the required/specified key and critical equipment for this work and (b) the remaining 50% can be deployed on lease / hire basis for all works provided, the relevant documents (commitment agreements etc.) for availability for this work are furnished: Tippers 2 Nos. (1 Own &1 Hire)

Others -- Certificate copy of RC with Ownership, hire deed or purchase invoice with Latest Insurance copies

Contractors should be registered in KPWD with class 3 and above registration.

Others -- Registration Certificate

Concrete self-loader/concrete mixer 1 No. (1 Own OR Hire)

Others -- Certificate copy of RC with Ownership, hire deed or purchase invoice with Latest Insurance copies

Tenderers who meet the above specified minimum qualifying criteria, will only be qualified if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity-(AxNx1.5-B) where of civil engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited. 06 Months (0.50 Years) B -Value at 2025-26 price level of existing commitments and ongoing works to be completed During the next 06 Months (0.50 Years) (period of completion of the works for which Tenders are invited)

Others -- EXISTING & ON-GOING WORK DETIALS

Bidder should have valid Registration with Employees Provident Fund Organization under EPF and Miscellaneous Provisions Act, 1952. (Should Attach Latest Copies)

Valid EPF Certificate

Financial Status

List of Financial Resources with Certificates

Others -- List of Financial Resources with Certificates

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. 2020-21 to 2024-25 achieved in at least two financial years a minimum financial turnover (in all classes of civil Engineering construction works only) of Rs.424.00 lakhs (Usually not less than two times the estimated annual payments under this contract)

Audited CA Certificate of Annual Turnover

liquid assets and /or availability of credit facilities of not less than Rs.53.00 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. (usually the equivalent of the estimated cash flow for three months in the peak construction period)

Others -- Certificate issued by Nationalized or Scheduled Bank

List of existing commitments and ongoing works

Others -- EXISTING & ON-GOING WORK DETIALS

The tenderer shall furnish, as part of his tender, earnest money deposit as shown in the column 4 of the table of the IFT for this particular work. The Earnest money Deposit shall be in two parts. Part (1) Rs.1,00,000.00 by e-payment. Part (2) Balance EMD 1,00,000.00 shall be in the form of Bank Guarantee in prescribed format obtained from any Nationalized/Scheduled Bank in favour of Executive Engineer Port and Fisheries Division, Udupi. The tenderer should upload the scanned copy of the original Part-2 of the EMD in the e-portal and shall be delivered to the Executive Engineer on or before the prescribed date of opening of technical bid.

Others -- Certificate issued by Nationalized or Scheduled Bank

Fee & Financial Details

Tender Fee Amount

₹2,650

EMD Fee Amount

₹2 L

Important Dates

Last Activity

18 Mar 2026

Published

18 Mar 2026

Bid Opening

27 Mar 2026

Download Ends

24 Mar 2026

Pre-Bid Meeting

23 Mar 2026

BOQ Preview

•

Construction of Multipurpose Fisheries Centre for Local Fishermen at Kodavooru in Malpe, Udupi Taluk & District.

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all mater...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification

•

I.S. 3620/1979 having compresSive strength not le...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of ce...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 15...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

•

polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...

•

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin- ing, including cost of materials, labour, curing as...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, p...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as...

•

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dus...

•

Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and f...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Precast Cement Concrete Interlocking Blocks - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cy...

•

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges a...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

•

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

•

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

•

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: For 50 mm dia GI elbow

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 50 mm

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Providing and fixing brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) : 50 mm nominal bore

•

Providing and fixing brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) : 80 mm nominal bore

•

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

•

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

•

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4 S...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Banker Ceritificate.png

Others - Bankers Certificate Format • 0.21 MB

kw-4 168 Kodavuru.doc

Tender Document • 0.48 MB

GST Declaration Certificate.docx

Others - GST declaration format • 0.01 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

PUNEETH KUMAR

₹98.5 Laccepted-finance