SPECIAL REPAIR/ REPLACEMENT OF UNSERVICEABLE SEWAGE LINE AND MANHOLES AT RT LINE MARRIED ACCN BLDG NO. P-216 TO P-220, P-228, P-230, P-232, P-234 AND P-236 OF 11 CSR UNDER GE (WEST) JALANDHAR CANTT

Amount

Excavation in trenches not exc. 1.5 m wide and n. exc. 1.5m in depth for foundation, etc, or for shafts,wells, cesspits, manholes, pier holes etc. and getting out in soft/loose soil including trimming bottom and sides of trenches, levelling/ gradient/ slopes and ramming bottom of trenches complete all as specified and as directed.

Excavation in trenches not exc. 1.5 m wide and exc. 1.5m but not exceeding 3.0m in depth for foundation, etc, or for shafts,wells, cesspits, manholes, pier holes etc. and getting out in soft/loose soil including trimming bottom and sides of trenches, levelling/ gradient/ slopes and ramming bottom of trenches complete all as specified and as directed.

Returning, filling in including levelling, watering and well ramming in layers n. exc. 25 cm thick each layer complete all as specified and directed.

Removing excavated material to a distance n exc 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Demolition of brick work or stone/ boulder masonary built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks, straight or corvered on plan exc. 6.0m mean radius built in cement mortar 1:4 complete all as specified and as directed.

Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete pipe) 150mm internal dia set in cement mortar complete all as specified.

Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete pipe) 200mm internal dia set in cement mortar complete all as specified.

Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to 150mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to 200mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Material and labour for 150mm bore salt glazed stone ware drain pipes (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as specified and directed.

Material and labour for reinforced concrete pipe 200mm bore class NP2 laid, tested and jointed with collars as per SSR Part-I clause No 18.74.4 complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete, manhole bed etc complete all as specified and directed.

Material and labour for providing PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, channel,benching/ haunching of manhole, laid to shape and slope, slightly rounded or chamfred angle and throating including necessary form work etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified.

Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement by using water proofing compound @ 2% by weight of cement complete all specified and as directed. (WPC shall be measured and paid seperately under respective item).

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces (block wall external) finished even smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

Material and labour for precast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate and set in cement mortar (1:4) as in landing, manholes cover slabs, chajjas, shelves and similar articles with plain fair faces, including chamfers, weatherings, throating and necessary form work etc complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in bed plates, bed blocks for grouting hold fasts, coping or simlar work including necessary form work complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips quality confirming to Fe-500 complete all as specified and directed.

Material and labour for cutting into existing manholes for connecting new drains by cutting out existing benching for forming branch, channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 and making good pipe and reforming benching as required finishing even and smooth for 200mm bore pipe complete all as specified and directed.

Material and labour for salt glazed stonewere gully traps, square or round mouthed 150 x 150 mm size type 'P' and setting and jointing to drain pipe in cement mortar (1:1) complete all as specified and directed. (Note: All excavation and earthwork, concrete bed, surrounds, kerbs etc and cast iron grating will be measured and paid separately.)

Dismantling of 100mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required Complete all as specified and as directed.

Dismantling of 75mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

Material and labour for 100mm dia sand cast iron soil, waste and vent pipe in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

Material and labour for 75mm dia sand cast iron soil, waste and vent pipe in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

Supply and fixing cast iron bends with door/inspection eye (any radius), diminishing pieces or tapers (larger bore measured) for 100mm bore pipe complete all as specified and directed.

Supply and fixing cast iron bends with door/inspection eye (any radius), diminishing pieces or tapers (larger bore measured) for 75mm bore pipe complete all as specified and directed.

Supply and fixing cast iron work article not exc. 5 kg each of grade, FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15 cm thick below or above ground level complete all as specified and directed.

Material and labour for 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection, laid in panels, concrete,path finishing surfaces finished even & smooth without using extra cement complete all as specified and directed.

Material and labour for 100mm thick plain cement concrete 1:2:4 type B-2, using 40mm graded crushed stone aggregate as in hardstanding, floor finishes, surface finished fair and even without using extra cement complete all as specified and as directed.

M/S DARSHAN & CO

YUSSUF MASIH AND BROS.

SARASWATI CONSTRUCTION CO