REPAIR AND REPLACEMENT OF DEFECTIVE SPARE OF EFFLUENT TREATMENT PLANTS FUME SUCTION PLANT CAR WASHING PLANT DEGREASING PLANT AND HULL PAINTING PLANT LOCATED IN DELHI CANTT UNDER GE(U) PM DELHI CANTT10

Amount

Draining and cleaning of alkaline chemical tank ,Hot water tank, Cold water tank in installed basement of de-greasing palnt and 05 Nos of ETP tank complete and removing frozen solid sludge from all tank in each month. Solid sluge and other wastage should be disposed / thrown at a minimum distance of 100 metre away from the plant or a location decided by users with in the 505 ABW premises complete all as specified and as directed. Details of Tank - (a) 05 ETP tank ( Clean in each Month) Total - 5 x 6 (month ) = 30 month (b) 03 Tank (Alkaline Tank-01, Hotwater Tank-01, Cold Water-01) Total = 3 x 3 (clean the tank once in 02 month) = 9 Month G total - 30+9 =39 Month

Material & Labour for cleaning and repairing of all stainless steel spray pipe lines of various size including nozzles laying on the floor inside the de-greasing washing chamber and connected other accessories complete. dismatling / removal the complete spray line alonwith oulet valve nozzle, coupling with packing after then complete drain out any remaining frozen materials inside the pipe line and nozzels,and reassembled , making good any leakage in pipe line with necessary gas cutting, welding , polishing, testing as per site requirement complete all as specified and as directed .

Material & Labour for overhauling of squirrel cage induction electric motor 3 phase 415 volts , 1455 RPM of capacity 60 HP/45KW with pump set complete cleaning the impeller and dischage /suction casing of the pump including repairs to pump complete with dismantling and re-assembly and testing NOTE: Rewinding of motor by super enamelled copper wire with class F insulation necessary disconnecting electric connections/ taking down and shifting to local workshop and brought back to site complete reassembled as per existing location . Lubrications oils and apply greasing to all moving parts. Repair/replacement, retrofit ,of all major/ minor parts i.e rotor,stator,winding,terminal box ,bearing, shaft , Fan, impeller , gland assembly, bearning assembly , coupling,Contact Terminals and checking and replacing the burnt cable glands and cunsumable items complere as requirement for smooth functioning of motor & pump set ,all materilas are deemed to be include in the quoted rate by the contractor all as specified and as directed.

All as per srl item No 3 here-in-before but motor of capacity 7.5 HP complete all as specified and as directed.

All as per srl item No 3 here-in-before but motor of capacity 5.0 HP complete all as specified and as directed.

All as per srl item No 3 here-in-before but motor of capacity 3.0 HP complete all as specified and as directed .

Isolate/de-energize the supply to the LT Panel Board of capacity ranging from 100 Amps to 400 Amps and voltage 415 Volts/230 Volts, opening the doors/covers of the cubicle enclosure for carrying out the servicing/maintenance/repairs of the Panel Board,modification and switch gear,MCCB, metering etc and re-fixing the same/New in place after repairs including testing and commissioning of the panel board comprising of the following:- a) Cleaning the inside switch gear chambers for removing dust, carbon and rusted surfaces including cleaning with blower . b) Check the condition of the DMC/SMC support insulators including cleaning applying Dr beck red for better IR values and replacement of insulators if required. c) Tightening up of all bus bar connections, cable connections, replace bolt, nuts wherever required. Note :- Spares will be measured and paid separately.

Taking down complete and supply & fixing in replacement of centrifugal air blower with motor of capacity 5 HP, 3P,415 Volt including complete fitting with existing suction / delivery duct necessary retrofit as per site requirement complete all as specified and as directed. Make :- Kirloskar/ Crompton /GEC

Supply and replacement of foot valve heavy duty of size 50mm complete all as specified and as directed. Make :- Zoloto/Kirloskar/ Leader/ AUDCO

Supply and replacement of AC induction tubular heater 9 KW, 415 volts, 3 phase of length 1.5 m length or as per sample with MS powder coated terminal cover as per sample complete all as specified and as directed. Make :- Telelec/Escort/USGC/Theeta.

Supply and replacement of mild steel medium garde pipe of size 250mm dia , 5.0 mm thick, both end flange type , round shape including Nut bolts, bend , Tee, reducer ,flange, welding work & retrofit work complete all as specified and as directed. Make:- Jindal/Tata/Oswal

Supply and replacement of Electro Hydraulic Thrustor Brake MDT 150-18 Kg , alongwith suitable brake shoe liner with ribets complete, required any retrofit work for fitting in existing foundation of thrustor brake complete all as specified and as directed. Make:- Speedage / Speed-o-control/ USGC

Supply and replacement of Electro Hydraulic Thrustor Brake MDT 200-18 Kg , alongwith suitable brake shoe liner with ribets complete, required any retrofit work for fitting in existing foundation of thrustor brake complete all as specified and as directed. Make:- Speedage / Speed-o-control/ USGC

Supply & fixing in replacement of Electro Hydraulic Thrustor 18Kg. 3 Phase 415V AC with Hydraulic Oil complete all as specified and as directed . Make:- Speedage / USGC / Speed-o-control

Supply and replacement of digital temperature indicator 6100 as per sample complete fitting necessary wiring as per existing panel all as specified and as directed. Make :- Audiotronics or equivalent ISI marked

Supply and replacement of thermostat 62" long as per sample including elecrical connection complete for suitable to hot water tank as per sample complete all as specified and as directed Make :-Hotwell or equivalent IsI Marked.

Supply and replacement of stainless steel water Spray Nozzels 16LPM; 1/2 BSP with necessary gas cutting, welding , polishing, testing as per site requirement complete all as specified and as directed. Make :- Spraytech or equivalent ISI marked

Taking down complete and Supply , installation, commissoing , testing in replacement in of centrifugal monoblock Pump set of capacity 12.5 HP,3000 RPM, 3 Phase 415 Volt with IP-44 protection including arrangement complete, mounting ,foundation and connecetd suction and delivery pipe complete as per existing all as specified and as directed. Make :- Kirloskar /Crompton / Beacon/ KSS

Taking down complete and Supply , installation, commissoing , testing in replacement of centrifugal monoblock Stainless Steel Pump set of capacity 3.0 HP,2700 RPM, 3 Phase 415 Volt with IP-44 protection including mounting ,foundation complete all as specified and as directed. Make :- Kirloskar /Crompton / Beacon/ KSS)

Taking down complete and Supply , installation, commissoing , testing in replacement of centrifugal monoblock Sludge Pump set of capacity 3.0 HP,3000 RPM, 3 Phase 415 Volt with IP-44 protection including mounting ,foundation complete all as specified and as directed. Make :- Kirloskar /Crompton / Beacon/ KSS/ Sulzer

Supply and replacement of Exhaust fan heavy duty of size 600mm sweep of 900RPM, 3 Phase, 415 Volt, 50 Hz AC with metal body including all accessories, connections, testing, assembling and making good to disturbed surfaces of wall including taking down old unserviceable one complete all as specified and as directed. Make:- Havells/ Bajaj/ Philips/ Crompton Greaves

Supplying, Laying ,and fixing in replacement of XLPE insulated armoured heavy duty electric cable of size 50 Sqmm 3.5 Core ,1100 Volts grade , with stranded aluminium conductor served with aninner sheathing of PVC tape armoured with GI wire and over all PVC sheathed in laid trenches/ passing through pipe/duct/road crossing/surface of wall/in hume pipe etc including fixing hardware,clamps,making good the damaged surfaces etc complete all as specified and as directed. Make :- Polycab/Finolex/ Fort Gloster/KEI/Havells

Supply and replacement of Air line filter with auto drain Valve complete all as specified and as directed. Make :- As per ISI Marked.

Material & Labour for replacement of shrouded copper conductor busbar 160Amp TPN (4 Bar) "W" Type for EOT Cranes with PVC sleeves RYBG DSL 4 Bar , hanger,clamps,anchor clamps, power feed kit and caps, joining tool with towing arm, end cap complete and including MS fabricated supports for mounting of conductors made out of mild steel angle of size 40x40x5 mm and 450 mm long including two coats of synthetic enamel back paint cover a coat of red oxide primer and supports to be provided at every one mtr distance complete all as specified and as directed . Make:- Stromeg /Speed-o-control /Safeline

Supply and replacement of 4 core 4.0 Sqmm PVC insulated & round sheathed bright annealed copper conductor cable for voltage grade 1100 V as per IS: 694 complete all as specified and as directed. Make :- Finolex/ Polycab/Kalinga/ Havells)

Supply and replacement of 3 core 2.5 Sqmm PVC insulated & round sheathed bright annealed copper conductor cable for voltage grade 1100 V as per IS: 694 complete all as specified and as directed. Make :- Finolex/ Polycab/Kalinga/ Havells

Material & Labour for Servicing of Hull pulling gear box of ratio 70:1 type 400 with taking out gears , rope drum with rope & replacement of gear shaft , locks , gasket set,nuts & bolts top up gear oil of standard grade , greasing, energizer of defective control panel and accessories and also Rates to include replacement of minor spares (control copper wiring, aluminium lugs, nut bolts and cosumable itms) complete all as specified and as directed Note:- Other parts shall be measured and paid separately as supply only.

Supply only steel wire rope size of 16 mm FMC construction 6 x 36 ungalvanised as per IS 2266/02 complete all as specified and as directed. Make:- Usha Martin/ Mahadev/ Fort Williom

Supply only rotary type limit switch RG/LS/4C , suitable for gear ratio 70:1 with 2 NO + 2 NC complete all as specified and as directed. Make:- USGC/Speedage/ Speed-o-control

Material & Labour for replacement of Floating shaft made out of M.S. EN8 material medium carbon steel of Cylindrical shape of size100mm dia and 1.80mtr length and shaft end both side machining with keyway slot ,coupling as per sample complete all as specified and as directed. Make :– Speedage/USGC/ Speed-O-Controls.

Supply and replacement of Pneumatic Solenoid valve 50 NB with Air Pipe & Pipe connected accessories and complete with electrical wiring upto control panel complete all as specified and as directed. Make:- Rotex/Trident/Aira (Model ECF50)

Dismantling / taking down defective & rusted pH controller with accessories and supply & fix pH controller with new SS enclosure outdoor type and wiring with copper cable not less than 1.5 sqmm ,complete all as specified and as directed. Make:- Nutronix/Omega/SB International

Material & Labour for Servicing of centrifugal floor mounted ID (Induced Draft) Fan of capacity 36000 CFM , V belt driven for ventilation system make of IEPL including their connected accessories complete for smooth functiononing with re-assembly and testing complete. NOTE: (a) Servicing to by done by auth service team. (b) Cleaning and inspect all component part of ID fan i.e vibration checking, fan housing, fan balancing & vabration analysis, Nut & Bolt proper tighting,suction pressure,abnormal noise, V belt correctly aligned and properly streched, clean disassembled part complete. (c) Lubrication and greasing all movable parts i,e bearing shaft, (d) Repair/replacement of V belt, roller bearing block , shaft ,V belt , in/out duct , MS 20mm round bar studs of length 60cm 4 Nos to hold the blades firmly with welding, brazing parts required for smooth functioning of ID fan complete to included in the quoted rate by the contractor all as specified and as directed.

All as per srl item No 33 here-in-before but centrifugal floor monted FD (Forced Draft) Fan of capacity 40000 CFM , V belt driven for ventilation system make of IEPL including their connected accessories complete all as specified and as directed.

Supply and fixing in replacement of paint spray guns HPLV Type - 59 or as per sample suitable for mannual painting and flexible PVC pipe heavy duty ISI mark not less than 15mm bore ,6 Mtr long complete all as specified and as directed. Make:- Bullows /Giraco/Ransburg/AP&T

Material & Labour for replacement floor paint filter size 630 x 650 x 50mm Mat Type – Class ‘A’ Glass Fiber Grade : G3 (EN779) Color : Green + White Thickness : 50 mm Weight : >250g/m2 Paint Hold Capacity : 2450 g/sqm Avg. Paint Arrest : 92% Rated Air Flow : 0.65 cum/sec Media Velocity : 2.5 m/sec Initial Temp Resistant : Up to 177 Degree ‘C’ Flame Resistant : Non Flammable complete with removal of old filter from floor after carefully taking out MS grating, removal of old filter and cleaning filter frame, replace filter media, refixing grating complete all as specified and as directed Make :- Automative solution/Environmental Engineering Co/Athlete.

Material & Labour for replacement of ceiling Air Filter Type : Progressively Structured , Polyester Thermally Bonded Impregnated, Grade : F5 (EN779) Thickness : 22 mm ,Weight : 600g/sqm Dust Hold Capacity : 437g/sqm Avg. Dust Arrest : 94% Rated Air Flow : 900cum/hr Media Velocity : 0.25m/sec ,Temp Resistanto 100 Degree complete with removal of old filter from ceiling after carefully taking down ceiling support and refixing after replacement of filters complete all as specified and as directed. Make :- Automative solution/Environmental Engineering Co/Athlete

Material & Labour for replacement fine filter of size 600mmx600mmx150mm woven synthetic media housed in GI wire mesh capacity of dust filtration up to 99% efficiency, the complete housing shall be fabricated out of 16 gz GI sheet,and double skinned insulation complete all as specified and as directed. Make:- Automative solution/Envirnmental Engineering Co/Athlete

Material & Labour for overhauling compressor unit 9 KG/ Sqcm with repalcement of compressor oil , air oil separator, oil filter primary and secondary, safety valve assembly, non return valve assembly, gasket set, fan belts, nuts & bolts, air pressure valves, complete itmes for smooth functioning of compressor included in quoted rate by the contractor all as specified and as directed.

Supply & fixing in replacement of defective AC heating elements 6 KW, 415 volts, 3 phase of length 610mm complete fitting as per existing loaction all as specified Make:- Telelec/Escorts/Theeta

Supply and replacement of LED flood light 120 Watt ,230 Volts ,50Hz suitable with Ultra -protective , waterproof and dustproof with IP 65, mintenance free including suitable down rod, clamps, nut, bolts and other related items for fixing the wall, surface complete all as specified and as directed. Make :- CG / philips / Bajaj / Wipro/ Havells

Supply and replacement of LED panel light of 36 watt weather proof size of 60X 60 CM with cabling to be done through SS Capping Argon Welded with SS walls of the washing chamber suitable to the existing site with all fixing accessories complete all as specified and directed by Engr-in-Charge. Make :- Syska / Bajaj/ Phillips/ Havells/wipro)

Material & Labour for taking out motor capacity of 15 HP ,1400 RPM alongwith blower set and rewinding of electric motor squirrel cage induction 15 HP, 1400 RPM, 415 Volts 3 Phase, 50 Hz with super enamelled copper wire of superior quality as per existing guage including varnishing, insulating material including reassembling fixing with blower and suction & dischage duct in position making connection testing and commissioning & complete all as specified and as directed.

Supply and replacement of defective hull resting trolly wheel OD 410mmx95mm and wheel collar thickness 15mm and depth of collar 25mm and wheel centre bored 60mm with key slot with six no supporting rives made out of M.S forging /M.S casting E.N.8 materrial as per directed by Engr-in-charge. Make:- USGC/Speedage/HS Engineering

Material & Labour for replacement of damage chemical filter jacket made out of 3mm SS sheet of size 800mm x490mm or as per existing sample / model . Jacket holding flange s.s round on the upper side of size 40mm x 3mm along with suitable size mounting holes /lifting hook. Wiremess of nominal dia 0.56mm and apperture 1.18mm bend into shape for fixing in side in jacket complete fitting all as specified and directed. Make:- HS engineering /USGC/Premerue

Supply and replacement of rubber gasket of size 60mmx5mm mounted on hull painting sliding gate by adhesive with flap on both sides along the length of size 3370mm gate complete all as specified ans as directed. Make:- As per ISI Marked

Supply and replacement of defective Car wash Brush suitable for existing automatic car washing plant or as per sample complete all as specified and as directed. Make:- As per ISI marked

Supply and replacement of Brush Rivite for suitable for automatic car washing brush or as per sample complete all as specified and directed. Make :- As per ISI marked

Supply and replacement of DOL starter Three Phase 415 volt suitable for 5.0 HP pump set complete all as specified and as directed. Make:- L&T/Schneider/Siemens/Havells

Supply and replacement of defective detergent pump capacity as per sample for car washing plant all as specified and as directed. Make:- KRE / Akash Pump / ISI Marked

Material & Labour for preparation of old painted surface of Degresing Plant / hull painting Plant /Car washing plant /Air Exhaust Plant complete and rust free, by scraping, cleaning, using wire brush, sand paper etc complete removal of old surface , After then Painting complete part of Plants with two coat of synthetic enamel paint as per existing colour code over one coat of zinc chrome primer of approved make complete all as specified and as directed . Make:- Berger/Asian Paints/Jenson & Nicholson/ Shalimar Note:- (i) The complete painting of De-Greasing Plant /Hull painting Plant /car washing plant /Air exhaust Plant and their connected all parts to be included in quoted rate. (ii) Any damage to govt property while executing the work is to be make good by the contractor. (iii) The cost of scaffolding arrangement laddars, T&P used while painting in the plants will borne by the contractor itself.

Taking down complete and Supply, installation and testing of three cylinder double gun extra heavy duty high pressure Car washing pump model of TCTW. 300RPM,650-700 PSI , 42-45 Kgf./Cm.Sq, including 5.0.HP motor,1440 RPM three phase 415 Volt,50Hz pressure tank, filling suitable oil, pressure pipe up to 15 Mtr, pulley with base frame complete mounting as per existing location and connected to the motor with help of V belt , pipe line in /out complete all as specified and as directed. Make :- HIMALAYA AGRO PUMPS PVT LTD or equivalent make as per ISI

Supply and replacement of Stainless Steel filter for Hull painting plant with suitable mesh size and pattern of nominal thickness 1.0mm and apperaure hole 10mm with equal interval alonwith suitable size of SS angle for supporting to around the wiremesh plate complete fabrication into rectangular shape size of 1.10M ( Length) X 0.92 M (width) or as per existing sample complete with necessary retrofit work all as specified and as directed. Make :- Jindal/TATA/JSW steel ltd.

Supply and replacement of Stainless Steel filter for Hull painting plant with suitable mesh size and pattern of nominal thickness 1.0mm and apperaure hole 10mm with equal interval alonwith suitable size of SS angle for supporting to around the wiremesh plate complete fabrication into rectangular shape size of 1.10M ( Length) X 1.15 M (width) or as per existing sample complete with necessary retrofit work all as specified and as directed. Make:- Jindal/TATA/JSW steel ltd.

Supply and replacement of Stainless Steel filter for Hull painting plant with suitable mesh size and pattern of nominal thickness 1.0mm and apperaure hole 10mm with equal interval alonwith suitable size of SS angle for supporting to around the wiremesh plate complete fabrication into rectangular shape size of 1.10M ( Length) X 0.82 M (width) or as per existing sample complete with necessary retrofit work all as specified and as directed. Make :- Jindal/TATA/JSW steel ltd.

Servicing and maintenance of Automatic Car washing Plant having three brush system with wasable dimension 1.8 X 2.0 x 5.0 mtr make of KRE installed at TPT ASC Coy alongwith 02 Nos heavy duty washing pump and other connected accessories with all testing for smooth functioning of equipment complete all as specified and as directed. NOTE: (a) Servicing to by done by auth service team once in month. (b) The contractor will also send technician on call basis in case of any fault and work will be carried out well qualified technician having good experience in the repairing field of automatic car washing machine. (c) Cleaning and inspect all component part of Automatic Car washing Machine alonwith 02 Nos heavy washing pump set i.e checking bruising system alignment and smooth movement of up and down direction with rotation, fan housing, Air blower balancing & vibration analysis, Nut & Bolt proper tighting,,abnormal noise,V belt correctly aligned , PLC based control panel , alignment of rail track, wax pump,wheels , wiring system, Gear box, GI pipe line with nozzles complete connected parts of equipment. (d) Lubrication and greasing all movable parts of equipment complete in each month (e) Repair/replacement of V belt, bearing of blower, shaft ,oil for pump, on/off push button, locking arrangement of panel, pressure pipe,nozzles,and other consumable items of equipment complete to included in the quoted rate by the contractor all as specified and as directed.

Supply and replacement of Stainless Steel sheet 304 grade ,1.6mm ( 16 gauge) thick including necessary, fabrication , cutting ,jointing,welding,and grinding in the shape/size and ss angle complete as per requirement in washing chamber of De-greasing plant. Replace damage SS sheet with new SS sheet by the SS electrode and help of Argon welding machine for jointing between SS sheet and after the work is done,it will be thoroughly checked/testing that there is no any leakage and cracking from replaced SS sheet complete all as specified and as directed. Make:- Jindal/Tata/BST/JSW Steel ltd.

Material & Labour for cutting/fabrication ,fixing & welding of MS angle iron of size as per site requirement making supports fixing brackets etc including bracing ,supports ,clamps,and back plates fabricated fron structural steel section including Nuts & Bolts ,washers,welding,bending cold or hot, drilling holes for bolts, in any shape or size as indicated or direcetd and inclusive of one coat of Red Oxide Zinc chrome paint and two coat of alumunium paint complete all specifed and as directed. Make:- Jindal/Tata/JSW Steel

Material & Labour for PCC1:3:6 typeC-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete for burried in ground of angle iron picket complete all as specified and as directed.

Supply and laying in replacement of 80 mm dia galvanised tubing medium grade ,ISI marked, including all fittings fixed to wall/roof/floor/ceiling by help of suitable clamps complete all as specified and as directed. Make:- Zindal/TATA/Oswal

Supply and laying in replacement of 50 mm dia galvanised tubing medium grade ,ISI marked, including all fittings fixed to wall/roof/floor/ceiling by help of suitable clamps complete all as specified and as directed. Make:- Zindal/TATA/Oswal

Supply and replacement of Gun metal Gate valve heavy duty of size 80mm with iron wheel head,screwed both end for galvanised pipe line complete all as specified and asdirected. Make :- Zoloto/Kirloskar/ Leader/ AUDCO/Sant

Supply and replacement of Gun metal Gate valve heavy duty of size 50mm with iron wheel head,screwed both end for galvanised pipe line complete all as specified and as directed. Make :- Zoloto/Kirloskar/ Leader/ AUDCO/Sant

Supply laying in replacement of CPVC pipes size of 50 mm dia, SDR 11 & plain SDR -11 fitting fixed to wall/ceiling or in floor etc, including all fitting i.e bend, tee,coupler,flange,end cap etc complete all as specifed and as directed Make:- Prince/Supreme/ finolex

Supply laying in replacement of CPVC pipes size of 25 mm dia, SDR 11 & plain SDR -11 fitting fixed to wall/ceiling or in floor etc, including all fitting i.e bend, tee,coupler,flange,end cap etc complete all as specifed and as directed Make:- Prince/Supreme/ finolex

Supply and replacement of CPVC Ball Valve size of 50MM dia complete all as specified and as directed. Make:- Prince/Supreme/ finolex

Supply and replacement of CPVC Long handle Ball Valve size of 25 MM dia complete all as specified and as directed. Make:- Prince/Supreme/ finolex

Supply and repalcement of CPVC Non return Valve of 50 MM dia dia complete all as specified and as directed. Make:- Prince/Supreme/ finolex

Supply and fixing in replacement of 3 layer PVC water Tank capacity of 500 Ltr complete all as specifed and as directed. Make:- Sintex/Plasto/prince/Supreme

Supply and replacemnt of electronic chemical dosing pump with max flow rate 6 LPH ,dischage pressure 4-6 Kg/Sqcm single phase 230 Voltsamd including suitable PVC tubing upto 4.0 Mtr for suction and delivery line complete all as specified and as directed. Make:- Jesco Model No IMP64 or ION Exchange/Maic India/Jesco

Supply and replacement of PP- FRP Fume Duct pipe ( Inner: polypropylene and Outer: Fiberglass reinforce plastic ) Size of 500mm dia, 8mm thickness in cylindrical shape with both end flange type and to be painted in blue color code suitable for fume ducting system and including bends, jointing materials, Tee, elbow, reducer, coupling etc and bracket with nuts & Bolts for fixing on wall/ floor /ceiling complete fitting all as specified and as directed. Make :- As per ISI Marked Note:- (applicable for item No 72 to 73) :- The contractor should visit the site to know the exsiting layout / size of Fume duct pipe before quoting the rates.

All as per Srl itme No 72 here-in-before but PP FRP duct pipe size of 250 mm dia complete all as specified and as directed.

Supply and laying in replacement of 25 mm dia galvanised tubing medium grade ,ISI marked, including all fittings fixed to wall /roof /floor /ceiling by help of suitable clamps complete all as specified and directed. Make:- Zindal/TATA/Oswal

Supply and replacement of Gun metal Gate valve heavy duty of size 50mm with iron wheel head,screwed both end for galvanised pipe line complete all as specified and asdirected. Make :- Zoloto/Kirloskar/ Leader/ AUDCO/Sant

Supply and replacement of mild steel medium garde pipe of size 100mm dia , 5.0 mm thick, both end flange type , round shape including Nut bolts, bend , Tee, reducer ,flange, welding work & retrofit work complete all as specified and as directed. Make:- Jindal/Tata/Oswal

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, for laying of pipes / cables / poles etc., or for shafts, wells,cesspits,manholes,pier holes etc not exceeding 10Sqm on plan and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling in trenches/ Back, filling of retaining walls with approved soil, including spreading, levelling, watering and well ramming in layers n.exc. 25cm complete all as specified and as directed.

Removing excavated soils to a distance not exceeding 50m and depositing where directed at level not exceeding 1.5m above the starting point complete all as specified and as directed.

Dismantling floor ,hearth or wall tiling including cement mortal mortal bedding etc(butnot backing) and removing rubbish off the premises complete all as specified and as directed.

Material & Labour for acid resistant tiles 15mm thick vitreous ceramic ,unglazed set.jointed and pointed in chemical resistant mortar,resin type in floor and wall including 10mm thick rendering in cement mortar 1:4 complete all as specifed and as directed. Make :- Johnson/ Kajaria/ Somamy

Universal Switch Gear Control

BUSINESS TEK INDIA

KEWAL SONS