142 H(F)(W)/2022-23

Amount

The work of safe carriage of the following material with loading/unloading from store centre Darshan Nagar to site of work. (Approx. Distance 0 to 20 Km.)

ST Pole S.P.55 (G.I.)

ACSR Weasel Conductor

11 KV HT XLPE Cable 3x185 sqmm

11 KV Cable Jointing Kit Outdoor 3x185 sqmm

11 KV Cable Staight Through Kit 3x185 sqmm

LT XLPE Cable AL 1x630 sqmm

Other Line material i.e. cross arm / conductor / pin insulator / stay / earthing/cable Box etc. except A.B Cable.

Dragging of ST Pole as per RESPO Norms.

Fabrication and Erection of Double Pole Support on ST Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Grouting and Binding of Stay in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Earthing of Poles as per RESPO Norms

Construction of Plinth of 250 KVA Transformer Size 2x2x1.5 Mtr including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Fencing of Transformer Plinth 250 KVA with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc.

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Stringing, Sagging, binding and jumpering of ACSR Weasel as per RESSPO Norms

Chemical Pipe for Earthing (all the material will be supplied by the contractor.)

Laying of underground 11 KV 3x185 sq mm (Double Circuit) XLPE Cable by HDD (HORIZONTAL DRILL DIRECTION) Method by using suitable HDPE Pipe & HDD Machine Complete in all Respect as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Road Restoration Charge Pakka Road Crossing

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Shifting and Mounting of 250 KVA Transformer as Per RESSPO Norms.

Supply and Laying of HDD Pipe for HT and LT Line 6'' Dia

Supply of HDD Pipe Jointer 6'' Dia

Supply and Laying of G.I. Pipe 6'' dia

ALOK KUMAR SINGH

Hindustan Electric Work