Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 CrAccepted-AOC PLOT NO F28 COMPLETE COOLING SOLUTIONS LLP PHASE 8 INDUSTRIAL AREA SAS NAGAR MOHALI PUNJAB 160055 UDYAM PB 20 0004625 | S A S NAGAR | PUNJAB | 160055 | ₹1.1 Cr | L1 | Accepted-AOC L1 Bidder |
| 2 | L2₹1.1 Cr+₹4.0 L (3.72%)Rejected-Finance | ₹1.1 Cr+₹4.0 L (3.72%) | L2 | Rejected-Finance Rejected |
| 3 | L3₹1.2 Cr+₹6.9 L (6.35%)Rejected-Finance 11TH FLOOR ECO CENTRE BUSINESS TOWER P NO 4 EM BLOCK SECTOR V KOLKATA 91 | KOLKATA | 24 PARAGANAS NORTH | WEST BENGAL | 700091 | ₹1.2 Cr+₹6.9 L (6.35%) | L3 | Rejected-Finance Rejected |
Tender Value
₹1.4 Cr
EMD Value
₹2.7 L
Closing Date
23 Jun 2022, 4:00 pmClosed
Executive Engineer Electrical
HIMUDA Electrical Division Dharamshala Distt Kangra H.P.
Sub Head Providing Variable refrigeration volume Flow based HVAC system
2022_HIMUD_61369_1
HIMUDA/EDD/W-7/Vol-XI/330-43
Open Tender
Electrical Works
Item Rate
180 days
Bharmour Distt Chamba
Please refer Tender documents.
11 documents required · 11 mandatory
₹5,900
Yes
₹2.7 L
Yes
29 Oct 2022
6 Jun 2022
24 Jun 2022
8 Jun 2022
23 Jun 2022
8 Jun 2022
8 Jun 2022 - 23 Jun 2022
Amount
Variable Refrigerant Volume System Supplying, installation, testing and commissioning of Air Cooled VRV/VRF units with scroll Compressor capable of modulating capacity i.e. it should be able to vary speed of the compressor as per the varying load conditions and works on R410A with heating & cooling both. The outdoor unit shall be a factory assembled unit housed in a sturdy weather proof casing constructed from rust-proofed mild steel panels coated with powder coated finish.The outdoor unit shall have scroll compressors and be able to operate even in case of breakdown of one of compressor. Each unit shall be equipped, with an oil separator to ensure stable operation with long refrigerant piping etc. Condensor Shall have with Hydrophlic Coating and Corrision Resistance Black Coating Ocean Black Fin. Chines Manufecturing not allowed. Outdoor Unit Supplying, Installation Testing and Commissioning Including vacumising, Gas charging of Modular type outdoor units equipped with highly efficient scroll compressors, with all Inverter Scroll type compressor(s), special acryl pre-coated heat exchanger, low noise condenser fan, auto check function for connection error etc, centralized controller for individual control complete as per OEM specifications of Following Capacity. COP of system 3.5 at 100% load at AHRI conditions. any type of Chinese manufecturing or Import are not allowed. Make Daikin, LG , Mitsubhishi, O Genral
48 HP combination of 16 HP X 3 ODU
32 HP Combination of 16 HP X 2 ODU
30 HP Combination of 16 HP + 14 HP ODU
ODU Connecting Kit
Indoor Units Supplying, installation, testing and commissioning of below mentioned capacity Hiwall indoor unit of air conditioners complete with fan and fan motor, controls, etc. as per specifications and drawings. Make Daikin, LG , Mitsubhishi, O Genral
Hiwall Unit- 0.83 TR CFM 336
Hiwall Unit- 1.02 TR CFM 442
Hiwall Unit- 1.59 TR CFM -537
Hiwall Unit- 2.02 TR CFM- 636
Supplying, installation, testing and commissioning of below mentioned capacity Cassette indoor unit of air conditioners complete with fan and fan motor, controls, drain Pump etc. as per specifications and drawings. Make Daikin, LG , Mitsubhishi, O Genral
4 Way Cassette Unit - 2.02 TR CFM - 670
4 Way Cassette Unit - 2.50 TR CFM -950
4 Way Cassette Unit - 3.50 TR CFM -1165
4 Way Cassette Unit - 4.50 TR CFM -1350
Supplying, installation, testing and commissioning of below mentioned capacity Ductable indoor unit of air conditioners complete with fan and fan motor, controls, drain Pump etc. as per specifications and drawings. Make Daikin, LG , Mitsubhishi, O Genral
Ductable Unit - 3.02 TR CFM - 1217
Ductable Unit - 4.50 TR CFM - 1923
Ductable Unit - 6.33 TR CFM - 2263
Supplying, installation, testing and commissioning of below mentioned capacity Treated Fresh Air indoor unit of air conditioners complete with fan and fan motor, controls, drain Pump etc. as per specifications and drawings. Make Daikin, LG , Mitsubhishi, O Genral
Treated Fresh Air Unit - 6.33 TR CFM - 837
Remote Control Supplying, Installation, Testing and commissioning of Cordless Remote reqd. to operate the indoor Cassette hi-wall units as per specification mentioned in the bidding document and as per standard guidelines etc. as required.
Supplying, Installation, Testing and commissioning of CordedRemote reqd. to operate the indoor Ductable TRA, AHU units as per specification mentioned in the bidding document and as per standard guidelines etc. as required.
2000 CFM 5 TR 3 Row Deep Static Pressure 125 MM.
1800 CFM 4.5 TR 3 Row Deep Static Pressure 125 MM. Make - Zeco/ Edgetech/VTS
Supply, installation, testing and commissioning Air Handling Unit Kit EEV & Commnication Kit.
Cable Trays. Supplying and installation following size of perforated pre-painted M.S. cable trays with perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required complete in all respects.
150mm (wide) x 50mm(depth) x 1.6mm (thick)
300mm (wide) x 50mm(depth) x 1.6mm (thick)
Providing & fixing control cum transmission wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.
2x1.5 Sq. mm.
GSS Ducting (Factory fabricated): Supply, installation and testing of factory fabricated 120 GSM sheet metal ducts of following thicknesses including Wire Rope Hangers & Supports complete with end fixing, flexible connections in ducting, nut bolts, gasket, splitter dampers and vanes etc. complete as per specification in accordance with the approved shop drawings and required by the specifications.The ducting shall be provided as per SMACNA standard.
24 gauge galvanised sheet
22 gauge galvanised sheet
Acoustic Lining of Ducts: Supplying, installing & testing of acoustic lining within supply and return air ducts as per the specifications. All ducts shown cross hatched on the approved shop drawings shall be provided with acoustic lining of open cell nitrile rubber insulation with density 140-160 Kg/ cum as per the specifications.
Thermal Insulation: Supply, Installing, testing and commissioning of duct thermal insulation, Nitrile rubber insulation with aluminium foil faced, class 'O' on ducts complete as per technical specifications with all the necessary mounting accessories as required for complete installation. 13 mm thick
Volume Control Damper: Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.The thickness of damper frame shall be 16 Gauge and damper blade shall be 18 Gauge
Flexible Connection: Supplying, fabricating, installing and testing of 150mm long silicon based flexible connection constructed of fire resistant material. The silicon shall have backing of glass fibre. Quantity is mentioned considering perimeter length.
Air Grilles: Supplying, installing, testing and balancing of powder coated extruded aluminium grilles of various sizes. Each grill shall be with fixed horizontal front bar, air distribution grid for straightening the air flow through the collar and register complete as per specification & drawings.
Power cable: Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:-
Armoured cable 35 sq. mm (3.5 core)
Armoured cable 25 sq. mm (3.5 core)
Armoured cable10sq. mm (3.5 core)
Pannel : Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:-
300 mm deep (nominal)
Bus Bar: Supplying and fixing Aluminum alloy or wrought aluminium strip bus-bars, suitable for 300 Amp. 415 volts capacity 4 No. each of cross-sectional area (51mmx6mm), in the existing enclosure or cubical panel with all accessories including connections etc. as required:-
Moulded Case Circuit Breakers: Providing & fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections etc. as reqiured.
100 Amp. -16 KA
200 Amp. -25 KA
250 Amp. -35 KA
modern cooling solution
Blue Star Limited
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .