REPAIRS TO CERTAIN DRAIN AND FENCING WORK AT VARIOUS LOCATIONS OF ZONE A AND M UNDER AOR OF AGE BR V OF GE (NORTH) BATHINDA AT BATHINDA MIL STN

Amount

Dismantling fencing wire mesh any type, complete all as specified and as directed.

Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete / brick work, etc, including taking out embedded portion dismantling of existing fencing of any type and making good disturbed ground surfaces, complete all as specified

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified.

Excavating in post holes or similar holes each not exc 0.50 Cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm watering and ramming surplus soil to a distance not exc 50m and making good as in soft/loose soil complete all as specified.

S & F structural steel work as in MS joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths ie within 20mm of the length indicated) complete all as directed conforming to Fe 410 W Gde E-250 quality 'B' complete all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. (Line wire shall be measured and paid for separately as supply only rate).

Supply only mild steel galvanised chain link fencing of mesh size 100mm x 100 mm and dia of wire 4 mm etc. including provision of binding wire complete all as specified and as directed .

S & F MS FI 40 mm x 6 mm as in fencing post for security post with fencing wire mash incl drilling boiling with required nuts, bolts of reqd length conforming to Fe-410-0 & Fe-310-0 complete all as specified. Note :- Nuts and bolts ot be measured separately.

S & F galvanised steel , 2 strand barbed wire 2.24mm dia , barbed with 2mm dia barbs at 65mm to 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line of wire to be measured), complete all as specified

M & L for PCC (1:3:6) type C2 using 40mm graded stone aggregate in foundations, filling and mass concrete.

S & F Mild steel screw bolts (machine made) with5 to 10 mm dia of neck and 40 mm long, hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolts n.exc 5 cm long complete all as specified and as directed.

S & F Mild steel Round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips Fe-410 W (Gde E-250) complete all as specified and as directed.

M & L for preparation of new steel and iron surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for machine pressed precast interlocking paver block with grey cement and no pigment, factory made, any shape and size, conforming to IS 15658-2006 of 60 mm thickness, made out of M-35 grade concrete laid over and including 30 mm thick layer of sand complete all as specified.

M & L cement concrete type C-1, 1:3:6 (20mm graded stone aggregate) as in coping, packing around interlocking paver blocks complete all as specified.

Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified.

Demolition of brick (laid flat or on edge, half or less that half) or brick tiles in floors, channels, kerbs, aprons etc (each layer), laid bedded and pointed in any mortar all as directed.

M & L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate in surface channels and drains including necessary form work complete all as specified.

M & L for old size bricks, sub class 'B', laid on edge in floors, bedded and jointed in cement mortar (1:6) and pointed in cement mortar (1:3).

M & L for bricks, sub class 'B', laid on edge half brick work in floors, bedded and jointed in cement mortar (1:6) and pointed in cement mortar (1:3).

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc. (Inner girth shall only be measured) complete all as specified.

M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in bed plates , bends, coping, benching moulded or chamfered edges complete all as specified.

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:4).

All as per ser item No. 26 above but except bricks.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M & L for 15 mm thick on internal surface rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces including mixing of water proofing compound, finished fair and even smooth ( without using extra cement), complete all as specified.

S & F MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc shall be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as directed conforming to Fe 410-W, Gde E-250 quality B.

M&L in repairs precast cement concrete louvers and jallies type B-0 12.5 mm graded stone aggregate 40 mm thick (measured solid) in (1:2:4) including all mouldings and set in Cement mortar (1:6) complete all as specified. Note;- Precase frame shall be measured separately and paid for under item 04032.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white primer complete all as specified.

M/s VISHAL ELECTRIC STORE

M/s Kamal Builders

V K CONTRACTOR

Ajay Enterprises

KULWANT RAI

N.G BUILDERS

SHARDA ENTERPRIES