Loading…
Loading…
Tender Value
₹4.0 L
EMD Value
₹8,000
Closing Date
27 Aug 2026, 5:00 pm4d left
Executive Engineer
Executive Engineer HPPWD Division Tauni Devi.
Repair of Maintenance of door and windows , plaster, wood and steel paints)
2026_PWD_141662_6
5174-5224 dated 13.08.2026
Open Tender
Civil Works
Percentage
60 days
Tauni Devi
Please refer Tender documents.
14 documents required · 14 mandatory
₹350
₹8,000
21 Aug 2026
21 Aug 2026
28 Aug 2026
21 Aug 2026
27 Aug 2026
21 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. | - | Per square metre | 118 | - |
| 2.01 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm (four millimetre) thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws second class teak wood 30 mm(thirty millimetre) thick as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. | 1 | Per square metre | 4,716 | ₹4,711.28 |
| 3.01 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3(three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm (thirty five millimetre) thick including ISI marked Stainless Steel butt hinges with necessary screws as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. | - | Per square metre | 3,060 | - |
| 4.01 | Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. | - | Per square metre | 64 | - |
| 5.01 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty Float glass panes of nominal thickness 4mm(four millimetre) (weight not less than 10kg/sqm(ten kilogram per square metre) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. | - | Per square metre | 1,202 | - |
| 6.01 | Providing and fixing 250x16 mm(one hundred fifty into sixteen millimetre) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. | - | Each | 235 | - |
| 7.01 | Providing and fixing 250x10 mm(two hundred fifty into ten millimetre) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. | - | Each | 105 | - |
| 7.02 | 150x10 mm (one hundred fifty into ten millimetre) | - | Each | 95 | - |
| 8.01 | Providing and fixing 125mm (one hundred twenty five millimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction of the Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, good service tax or other taxes imposed by the Government. | - | Each | 196 | - |
| 8.02 | 100mm (one hundred millimetre) | - | Each | 124 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.56 MB
sbd6.pdf
Tender Documents • 3.45 MB
BOQ_210277.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].