REPAIR AND MAINT OF DRAIN FENCING BOUNDARY WALL HARDSTANDING PATH ETC IN ND MUMBAI UNDER AGE B R I UNDER GE (NW) KUNJALI COLABA MUMBAI

Amount

Material & labour for stainless steel decorative railings, staircase made out of stainless Steel pipes,stainless Steel flats, stainless Steel plates etc. complete with and including necessary welding, buffing/ polishing and fixing in repairs complete all as specified and directed by Engineer-in-Charge. Note :- Design and pattern for stairs/ladders shall be as approved by GE. Grade of steel shall be Grade 316

Material & labour for stainless steel decorative railings chains alloy of grade 316 having 8mm minimum thickness as used to connect two stainless steel post with hooks etc. complete with and including necessary welding, buffing/ polishing and fixing complete all as specified and directed by Engineer-in-Charge. NOTE:Design and pattern shall be approved by GE.

Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed.

M&L brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed

Supply & Fix in repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia. barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed.

Supply & Fix in repairs wire barbed tape concertina coil wire of 50 turn having core wire of high carbon spring steel of high tensile strength and a carbon steel strip of 20mm width, 0.5mm thick having razor sharp barbs punched tape and core wire hot dip galvanized, complete all as specified and directed.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

Material and labour for brick wall tiles minimum size of each tile 75mmX225mmX20 mm thick, (with grey cement & no pigments), set jointed and pointed in wall over and including 15 mm thick backing coat layers in cement mortar (1:3). all as specified & directed .

Material and labour for Coloured dholpur tiles in vertical surface , set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified directed.

Material and labour for Chequered cement concrete tiles 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry in floors with in equal proportions & pigments with red and yellow colour over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 80mm thickness with grey cement and pigment laid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed.

Material and labour for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 60mm thickness with grey cement and pigment laid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed.

Material and labour PCC 1:2:4 type B1 using (20 mm graded aggregate) as in kerbing all around of tile complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for drain in hard/dense soil complete all as specified and as directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm with soils complete all as specified and directed.

Removing excavated surplus soil exc 250m but n.exc 500m deposiitng where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes , jointed in cement mortar and taking out of trenches, for following sizes :-

600mm dia

300mm dia

150mm dia

Material and labour for Reinforced concrete pipes 600mm dia , class NP2, laid and jointed complete with collars complete all as specified and directed.

Material and labour for Reinforced concrete pipes 300mm dia , class NP2, laid and jointed complete with collars complete all as specified and directed.

Material and labour for Reinforced concrete pipes 150mm dia , class NP2, laid and jointed complete with collars complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Supply & fixing for mild steel works as in doors or gates of angle or other sectons with gusset plates (plain or chequered) channels, rails, braces etc Fe-410-W (Gde E-250) Quality-A complete drilled, welded etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed.

Supply & fixing for framed work such as grills, gratings, sun shed etc with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars, barred iron doors, ladders, farmed balastures, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Material and labour for preparing new or previously untreated surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level reinforced complete all as specified and directed. .

Demolition of cement concrete in ground floor and paving exceeding 15cm thick below or above ground level reinforced complete all as specified and directed. .

Material and labour for ready mix concrete work in pavement/hard standing of flexural strength 25Kg/Square centimeter in field using 400kg of cement per cubic metre thickness of concrete 25cm or less complete all as specified and directed.

Material & labour for cement concrete 1:2:4 type B2 (using 40mm graded stone aggretate) as in surface channel or drain complete all as specified and directed.

Material & labour for PCC (1:3:6) type C1 using 20mm graded stone aggregate in coping bed block etc including necessary form work complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries to a distance upto 500m complete all as specified and directed.

Material & labour for rendering minimum 20mm thick ready mix mortar in one coat with and including curing all as per manufacturer's instruction complete all as specified and directed

Material & labour for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer on wall/roof complete all as specified and directed

Demolition of reinforced (reinforcement cut as required to facilitate demolition) cement concrete in ground floors and paving not exceeding 15 cm thickness( below or above ground level)complete all as specified and directed.

Material & labour for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) setin cement mortar (1:6) work for landings, cover slabs, manholes, chajjas, water troughs, mangers shleves and similar articles with plain faces complete all as specified and directed

Material & labour mild steel TMT bars 6 to 8mm dia and over cut to length bent shape as required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed

Material & labour for 100mm thick PCC 1:4:8 type D2, using (40mm graded stone aggregate) as in sub base complete all as specified and directed.

Material & labour for 100mm thick PCC 1:2:4 type B2 using (40mm graded aggregate), as in flooring complete all as specified and directed.

Material & labour for 75mm thick PCC 1:3:6, type C2 (using 40 mm graded agg) as in plinth protection complete all as specified and directed.

Material & labour for finishing concrete road, pavement with brooming all as specified and as directed

Material & labour for forming contraction (Dummy) joints 65mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and as directed

Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories).complete all as specified and directed.

Supply & fixing 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

Supply & fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

Supply & fixing 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

Supply & fixing for PVC (SWR) bends any radius 160mm bore complete all as specified and as directed

Supply & fixing for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed

Supply & fixing for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed

Dismantling fencing wire mesh, any type all complete as specified and directed

Supply & fixing mild steel security chain link fencing 60mm x 60mm mesh made out of 3mm dia MS wire and 1.00mm thick PVC coating throughout fixed to RCC/iron post including binding wire complete all as specified and directed

Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion in concrete complete all as specified and directed.

Supply & fixing mild steel works as in fencing, posts & struts in fencing embedded in stone masonry/bricks works including cutting tops to shape as directed, drilled holes notching for wires flat iron fillets (for securing wire mesh etc) inlcuding all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified an directed

Supply & fixing mild steel round bars 10mm dia and over, in horizontal support for chain link straining of fencing including cut to length, bent to shape required including cranking, bending spirally for hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410 -W- (Gde E-250) Quality 'A' or Fe-290 (Gde-E-165) complete all as specified and directed.

Supply & fixing mild steel screw bolts 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other ends each screwed end to the fitted with washers and are haxagonal or square nut dia of shank 5 to 10 mm and length of bolt exc. 5cm but n.exc 10cmcomplete all as specified and directed.

Material & labour for Granite of 20 mm thick in vertical surfaces such as dado, skirting, steps / risers, machine cut bedded and jointed with grey white cement slurry and pointed with white cement with add mixture of pigment to match the shade of granite stone including cutting, grinding and polishing and including 15mm thick backing coat in CM 1:4 complete all as specified and directed.

jalandhara construction

RAJENDRA CONSTRUCTION

SUNRISE CONSTRUCTION CO

Nexus Infratech

Shetty Construction Co