Face lifting Upgradation of Divisional sub- Divisional offices of KPDCL Bijbehara SD office Aishmuqam SD office Bijbehara SD office Plant and Divisional Office

Amount

Face lifting/Upgradation of Divisional/sub- Divisional offices of KPDCL(SD office Aishmuqam,SD office Bijbehara,SD office Plant and Divisional Office)

Dismantling tile work in floors/side walls and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm as per direction of Engineer-in-charge.

Providing and fixing fly proof/wire gauge shutters to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete with Galvanized M.S. Wire gauge with wire of dia. 0.63 mm with 12 mm mild steel U beading including ISI marked M.S. pressed butt hinges, handles and tower bolts bright finished of required size with necessary screws. First class kali wood

12mm Cement plaster on the rough side of single or half brick wall of mix 1: 4 (1 cement: 4 coarse sand)

Providing and applying Plaster of Paris putty of required thickness over plastered surface to prepare the surface even and smooth complete.

Crazy ceramic wall/floor tiles for Bathrooms, with under layer 12 mm thick cement mortar 1:3 (1 cement: 3 coarse sand), with joints not exceeding 5 mm, including filling the gaps with matching pigment mixture & mixing with synthetic polyester fibre, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete as per direction of Engineer-in charge. with a floating coat of neat cement including grouting the joints with matching pigments etc. complete job (Size of tile 600x600mm).

Crazy ceramic floor tiles, with under layer 12 mm thick cement mortar 1:3 (1 cement: 3 coarse sand), with joints not exceeding 5 mm, including filling the gaps with matching pigment mixture & mixing with synthetic polyester fibre, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete as per direction of Engineer-in charge. with a floating coat of neat cement including grouting the joints with matching pigments etc. complete job (Size of tile 600x600mm).

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm PVC/sand cast Iron P or Strap, 10 litter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous China Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

Providing and fixing 3-layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold-water supply including all PP-R plain and brass threaded Polypropylene random fittings, unions, gate valves. This includes testing of joints complete as per direction of Engineer-in charge.

PN-16 pipe, 25mm OD(SDR-7.4)

PN-16 pipe, 32mm OD(SDR-7.4)

PN-16 pipe, 40mm OD(SDR-7.4)

Providing and fixing soil, waste and vent pipes, 100 mm dia.

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS: 8931

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge 15 mm nominal dia.

Providing and fixing 15mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H. D plastic balls. 15mm nominal bore, 105mm long, weighing not less than 138gms.

Providing and fixing an plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 30 cm length.

Electric Fitting with 4 No. Ceiling & 4 No. Exhaust Fans & Heating Points (one Electric point is switch, plus three/five pin socket, plus indicator, plus LED 12W ceiling light/lamp with wire of 2.5mm size of required length in lighting circuit; 32 Amp switch, socket with inbuilt indicator & wire of 4mm size of required length for Heating circuit and switch, plus dimmer, plus Fan (exhaust or ceiling) & wire of 2.5mm size of required length. All the electric points are inclusive of main circuit Board, MCB's and other required materials which shall not be considered/counted separately.

Providing and Fixing of 200W LED Flood Light – Ip66 Waterproof LED Lights with 120° Wide Beam Halogen Light, Focus LED Lamp Light for Yard of Philips/Havelis/Crompton etc. make.

Providing and fixing of geyser of approved brand like Hovels/Venus/Crompton Groves etc. of capacity 50 litters

Polishing on wood work with readymade wax polish of approved brand and manufacture on old work.

Finishing walls (inner & outer walls) with textured exterior paint of required shade on Old/New work (two or more coats applied @ 4.28 litter/10sqm) over and including base coat of exterior primer applied @ 3.20kg/10sqm

Providing and fixing PVC wall panel having size of 8mm thick pvc panel non-combustible fire performance as per BS-476(Part-6 &7) with frame of GI channel of size 3m x 0.10m scaffolding if necessary all iron work etc. complete of standard BIS certified make; design and installation as per directions of engineer in-charge.

SITC of Wall Mounted Electric Water Heater (Geyser) with inbuilt 10 litres water storage stainless steel body tank, 02 kW rated copper heating element, 08 bar min. operating pressure, 05 star BEE rating, fully automatic, thermostat, indicators etc. This also includes all accessories required during installation like safety valves, NRV, connection pipes (hot & cold), suitable capacity electric plug top, electric cable etc. and suitable for 01 phase, 230 V, 50 Hz, AC electric supply as per standard practice and directions of Engineer In Charge. Make-Racold /Bajaj/ CG / Crompton/ Havells / Jaquar / AOSmith / Usha

Executive Medium Back chair with minimum dimensions of 75cm(W) x 75cm(D) x 97cm - 112cm (H)(back size W- 50 cm; H-70 cm); (Seat size W-46cm D-47 cm) (Seat Height:42-52cm) (±5 % variation subject to acceptance of Bank); Seat should be composed of 1.25± 0.1cm thick hot pressed ply further upholstered with leather and moulded polyurethane foam; Back and seat should be made of high resilience Foam; Polyurethane armrest should be made of black integral skin polyurethane. Armrest top should be upholstered with foam and leather. Mechanism shall have following features: 360o revolving type; knee tilt system mechanism; Tilt Tension adjustment; 5- position locking system having unlock back mechanism; Pneumatic height adjustment; Static seat depth adjustment system with five position locking; Pedestal should be made up of Die cast aluminium having size 66.5±0.5cm and fitted with 5 no. of twin wheel castors. (Black Colour) As per design approved by engineer-in-charge.

SITC of Pigeonhole locker with12 No Of Lockers, Type Of Lock Pad Lock, Material CRCA Sheet, Finish Type Color Coated Features Durable, Corrosion Resistant, etc as per design approved by engineer-in-charge.

Providing and fixing of Wall to wall(Matting) of size (18x12) and (10x12) feet

Providing and fixing of Therma cool of sizes

Removing white or color wash by scrapping and sand prepering the surface smooth including necessary repairs to scratches etc. complete

Distembering with dry Distember of approved Brand and manufacture (one or more coats) and of required shade on old work to give an even shade

SITC of Steel locker 7 ft. height

SITC of Rack 7 ft. long

Electric Fitting with Heating Points ( Three/five pin socket, plus indicator , 32 Amp switch, socket with inbuilt indicator & wire of 4mm size of required length for Heating circuit and switch. All the electric points are inclusive of main circuit Board, MCB's and other required materials which shall not be considered/counted separately.

SITC of Standard Table of Size 4x 2.5 feet

SITC of Door Curtains (4x8) feet

SITC of Window Curtains (7x6.6) feet

SITC of Window Curtains (4.5x7) feet

SITC of Window Curtains (5x6) feet

SITC of Window Curtains (3x4) feet

SITC of Steel Rods for Curtains

Brackets for holding the steel rods of standard make

Steel reeling with 1.5inch vertical rods and 2inch top rod with 3No. Small rods (5suta) with 02 No. Main pillers.

painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade

S/P/F of MS.grills of required pattern in frames of windows etc with MS flats, square or round bars (8mm) including priming coat with approved steel primer complete job.

Providing and laying of PVC pipes for drainage 4 inch Dia along with Collers ,joints,Tees 1 feet deep inside earth complete job

Providing and Fixing of Door made of MS Angle iron (1.5x1.5 inch) and MS Metal sheet(2 mm thick) with Dimentions 5' 8"x2' 6".5 complete job

Providing and fixing of wall Mounted office Board with office name printed made of angle iron 1.25 x1.25 inch 5 mm thick and sheet metal of 2mm thick and all accessories required for complete job completion. The dimentions of board are 10x3 feet .

Providing and fixing of Roll of honour Board for Technical Section complete job of size 3x5 feet

MOHAMMAD YOUSUF DAR (BID ID -2590516)

YASIR ALTAF VAID (BID ID -2590865)