Loading…
Loading…
Tender Value
₹11.2 Cr
EMD Value
₹22.4 L
Closing Date
25 Aug 2026, 3:00 pm
Yes (up to 3 members)
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
CIVIL
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V which ever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfilment of technical eligibility criteria for different components. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt , Organization, work experience certificate issued by public listed company having average annual turnover of Rs500 crores and above in last 3 financial years excluding the current financial year, listed on national stock exchange or Bombay stock exchange, incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the public listed company to issue certificates. In case tenderer submit work experience certificate issued by public company, the tenderer shall also submit along with work experience certificate, the relevant company of work order, the bill of quantities, bill wise details of payment received duly certified by charted accountant, TDS certificate for all payment received and a copy of final /last bill paid by company in support of above work experience certificate. Substantially completed work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of price variation clause(PVC), if any (has been made to the contractor in that ongoing contract and no proceedings of termination of contract on contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60days of date of invitation of present tender. (for details refer GCC)
Defination of Similar Work :- A1. Any Civil Engineering work consisting of execution of earthwork in formation and any type of bridges.
47 conditions · 11 needing a document upload
For the tender value above Rs.10.0 crores, the tenderers should submit Bid capacity statement in the prescribed proforma (As per GCC) duly verified by Chartered Accountant. In case, the tenderer/s failed to upload Bid Capacity Proforma along with offer, their /his offer shall be considered as incomplete and will be rejected summarily
Copies of the following documents are to be uploaded: (i) Details such as Name of the tenderer/ Contractor, Complete address with pin code, Contact Number (ii) Copy of PAN Card (iii) Copy of GSTIN card
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family( HUF) / Limited Liability Partnership (LLP)etc. The tenderer(s) shall enclose the attested copies of the requisite documents(including Power of Attorney, if opted) for constitution of their concern as per clause 14 of GCC Part I and as per a) Clause 17 of GCC Part I, for JV b) Clause 18 of GCC Part I, for Partnership firm
I/We also hereby agree to abide by the Indian Railways Standard General Conditions Of Contract, with all correction slips up-to- date and to carry out the work according to the Special Conditions of Contract and Specifications of materials and works as laid down by Railway in the annexed Special Conditions/Specifications, Schedule of Rates with all correction slips up to date for the present contract
I/We have read the various conditions to tender attached hereto and agree to abide by the said conditions
I/We have read the various conditions attached/ referred to in this tender document, and agree to abide by the said conditions.
I/WE also hereby agree to abide by the INDIAN RAILWAY GENERAL CONDITIONS OF CONTRACT- APRIL 2022, with all correction slips up to date and to carry out the works accordingly.
Deployment Of Qualified Engineers At Work Sites By The Contractor. The contractor shall also employ Qualified Graduate Engineer or Qualified Diploma Holder Engineer, based on value of contract, as may be prescribed by the Ministry of Railways through separate instructions from time to time.(As per RB ltr no.2012/CE-I/CT/O/20 dt:10.05.2013)
I/WE also hereby agree to abide by the INDIAN RAILWAY GENERAL CONDITIONS OF CONTRACT- April 2022, with all correction slips up to date and to carry out the works accordingly.
Until a formal agreement is prepared and executed, acceptance of this tender shall constitute a binding contract between us subject to modifications, as may be mutually agreed to between us and indicated in the letter of acceptance of my/our offer for this work.
I/We offer to do the work for CPM/GS/II/SC, at the rates quoted in the attached schedule and hereby bind myself/ourselves to complete the work in all respects within the period of completion stipulated in the tender document, from the date of issue of letter of acceptance of the tender. The Bid security shall stand forfeited without prejudice to any other right or remedies in case my/our Tender is accepted and if : (a) I/We do not execute the contract documents as stipulated in performance guarantee clause of GCC as detailed in general instructions. (b) I/We do not commence the work within seven days after receipt of orders to that effect.
I/We have read the various conditions attached/ referred to in this tender document, and agree to abide by the said conditions.
A tenderer claiming credentials as an individual for their share in a partnership firm, has to submit both the deeds of (i) partnership deed, showing % of their share and (ii) retirement deed from the partnership firm(or) deed showing the closure of business operations of the partnership firm, as applicable. Failing to submit the above deeds, the offer of the tenderer will be summarily rejected.
Bid Security: (refer clause 5 of Part - I of IRSGCC- April 2022 along with correction slips).The Bid Security shall be deposited either in cash through e-payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India .The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90 days beyond the bid validity period.
IRGCC-2022 along with corrected slips and Advanced Correction slip No.1 vide Rly Board Letter No.2022/CE-I/CT/GCC-2022/Policy dt:14-07-2022 & Advanced Correction slip No.2 vide Rly Board Letter No.2022/CE-I/CT/GCC-2022/Policy dt:13-12-2022 are to be followed for evaluation of tenderers.
The tenderer shall clearly specify whether the tender submitted on his Own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) I Registered Society/ Registered Trust / Hindu Undivided Family( HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the requisite documents (including Power of Attorney, if opted) for constitution of their concern as per Cl.14 of GCC- Part-l and as per a) Clause 17 of GCC - Part-1, for JV b)Clause 18 of GCC - Part-I, for Partnership Firm.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender value is including escalation of (-)15% (minus Fifteen percent) on CPWD DSR rates. Tenderer should note this before quoting the rates
The General Conditions of Contract governing the performance of the works covered by this tender are the IRS GCC-2022 [including upto ACS no.6. A soft copy of the Indian Railway Standard General conditions of Contract is uploaded in the attached documents to the tender for reference. Hard copy of IRSGCC (with up-to-date correction slip) may be perused in the office of the Chief Administrative Officer/ Construction/ South Central Railway / Secunderabad - 500071. The tenderer/s is/are deemed to have kept himself/themselves fully Informed of the provisions of the IRS General conditions of Contract including all corrections and Amendments issued up to date (as on date,IRS GCC-2022 upto ACS no.6 shall be considered) while submission of offer and any claim that he/they is/are not aware of any amendment or correction slip to the IRSGCC shall not be entertained.
The prospective tenderers are advised to follow the IRSGCC with amendments from time to time together with conditions, Special Conditions and specifications which are annexed to the tender document and attached to the tender. The documents attached to the tender document should be clear and legible for evaluation of tenders. Illegible copies will not be considered for evaluation.
The successful bidder shall have to submit a Performance Guarantee (PG),amounting to 5%/10% (as mentioned in LOA) of the original contract value, within 21 (Twentyone) days from the date of issue of Letter of Acceptance (LOA). Extension of time for submission of PG beyond 21 (Twenty one) days and upto 60 days from the date of issue of LOA may be given by the Authority who is competent to sign the contract agreement. However, a penal interest of 12% per annum shall be charged for the delay beyond 21(Twenty one) days, i.e. from 22ndday after the date of issue of LOA. Further, if the 60thday happens to be a declared holiday in the concerned office of the Railway, submission of PG can be accepted on the next working day.If the Contractor fails to submit the requisite PG even after 60 days from the date of issue of LOA, the contract is liable to be terminated
All the instructions furnished in the Technical compliance/Commercial Compliance/Check-list/Undertakings are only indicative and not exhaustive. The Tenderer shall read The GCC/Tender Document for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
If the Tenderer(s) deliberately give(s) wrong information/incorrect documents in his/their offer or create circumstances for the acceptance of his/their offer, the Railway reserves the right to reject such offer at any stage.
All terms and conditions in the tender documents are binding on the Tenderers.
Railway reserves the right to accept or reject any or all the tenders and to award the work in whole or in part without assigning any reason.
Unreleased Bid Security, if any, held with the Railway Administration, Shall not be adjusted towards the Bid Security to be remitted.
HYB division: Gati Shakti: Malkajgiri Yard Re-Modeling Provision of downline and 02 additional lines (other than track work)
04-GS-SC-II-26-OT
04-GS-SC-II-26-OT
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹22.4 L
31 Jul 2026
31 Jul 2026
11 Aug 2026
158 items across 9 schedules · ₹12,65,96,262.88 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 5km | cum | 4912 | 261.35 | 12,83,751.2 |
| 2 | All kinds of soil | cum | 5316 | 177.5 | 9,43,590 |
| 3 | All kinds of soil. | cum | 108 | 260.3 | 28,112.4 |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 150 | 196 | 29,400 |
| 5 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 482.55 | 700.5 | 3,38,026.28 |
| 6 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 210 | 2,123.75 | 4,45,987.5 |
| 7 | Foundations, footings, bases for columns | Sqm | 1056.05 | 392.15 | 4,14,130.01 |
| 8 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) | cum | 168 | 10,105.1 | 16,97,656.8 |
| 9 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 65 | 9,045.75 | 5,87,973.75 |
| 10 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 1664 | 392.15 | 6,52,537.6 |
| 11 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | Sqm | 2871 | 842.5 | 24,18,817.5 |
| 12 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 29 | 961.3 | 27,877.7 |
| 13 | Under 20 cm wide | Metre | 1572 | 208.55 | 3,27,840.6 |
| 14 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 11 | 7,132.25 | 78,454.75 |
| 15 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 69.39 | 7,311.25 | 5,07,327.64 |
| 16 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 1186 | 8,198.55 | 97,23,480.3 |
| 17 | Area of slab upto 0.50 sqm | Sqm | 54 | 5,413.5 | 2,92,329 |
| 18 | Area of slab over 0.50 sqm | Sqm | 12 | 5,136.3 | 61,635.6 |
| 19 | Granite work | Metre | 11 | 510.95 | 5,620.45 |
| 20 | 18 mm thick Italian Marble stone slab, Perlato, Rosso Verona, Fire Red or Dark Emperador etc. | Sqm | 20 | 10,414.8 | 2,08,296 |
| 21 | Dark shade pigment using ordinary cement | Sqm | 208 | 1,442.15 | 2,99,967.2 |
| 22 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | Sqm | 476 | 3,186.7 | 15,16,869.2 |
| 23 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 618 | 4,481.3 | 27,69,443.4 |
| 24 | 110 mm diameter | Metre | 90 | 377.4 | 33,966 |
| 25 | 110 mm | Each | 12 | 136.15 | 1,633.8 |
| 26 | 110 mm Shoe | Each | 26 | 131.85 | 3,428.1 |
| 27 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 612 | 738.65 | 4,52,053.8 |
| 28 | Ridges plain (500 - 600mm) | Metre | 45 | 532.35 | 23,955.75 |
| 29 | Crimp curve | Sqm | 107 | 496.75 | 53,152.25 |
| 30 | Gutter (600 mm over all girth) | Metre | 45 | 1,313.7 | 59,116.5 |
| 31 | 1:6 (1 cement: 6 fine sand) | Sqm | 2696 | 383 | 10,32,568 |
| 32 | Raised and cut pointing | Sqm | 870 | 419.9 | 3,65,313 |
| 33 | Flush/ Ruled pointing | Sqm | 78 | 385.4 | 30,061.2 |
| 34 | New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm | 5 | 171.1 | 855.5 |
| 35 | Two or more coats on new work | Sqm | 602 | 155.9 | 93,851.8 |
| 36 | Two or more coats on new work | Sqm | 563 | 146.8 | 82,648.4 |
| 37 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 1389 | 2,434.25 | 33,81,173.25 |
| 38 | In cement mortar | cum | 146 | 2,060.2 | 3,00,789.2 |
| 39 | In cement mortar | cum | 469.61 | 2,458.95 | 11,54,747.51 |
| 40 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | Kg | 261 | 5.65 | 1,474.65 |
| 41 | For thickness of tiles above 25 mm and up to 40 mm | Sqm | 126.4 | 113.35 | 14,327.44 |
| 42 | G.S. Sheet | Sqm | 5 | 164.95 | 824.75 |
| 43 | Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). | cum | 1474.91 | 24.85 | 36,651.51 |
| 44 | Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer- in-Charge. | per cm depth per cm width per metre length | 19800 | 8.65 | 1,71,270 |
| 45 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in- charge. (The panel shuttering work shall be paid for separately). | cum | 1300 | 9,823.8 | 1,27,70,940 |
| 46 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. | Sqm | 198 | 2,017.6 | 3,99,484.8 |
| 47 | Providing and placing in position 100 mm thick factory made machine batched and machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100 mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc including cost of cartage, all leads and lift, handling at site etc. all complete as per direction of Engineer-in- Charge. | Sqm | 4 | 3,081.95 | 12,327.8 |
| 48 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | Each | 24 | 53.25 | 1,278 |
| 49 | 20 mm nominal dia Pipes | Metre | 54 | 537.6 | 29,030.4 |
| 50 | 25 mm nominal dia Pipes | Metre | 54 | 627.25 | 33,871.5 |
| 51 | 40 mm nominal dia Pipes | Metre | 300 | 563.05 | 1,68,915 |
| 52 | 150 mm nominal dia Pipes | Metre | 8 | 6,822.7 | 54,581.6 |
| 53 | 15 mm dia nominal bore | Metre | 50 | 580.45 | 29,022.5 |
| 54 | 20 mm dia nominal bore | Metre | 66 | 635.2 | 41,923.2 |
| 55 | 25 mm dia nominal bore | Metre | 138 | 467.75 | 64,549.5 |
| 56 | 32 mm dia nominal bore | Metre | 270 | 540.3 | 1,45,881 |
| 57 | 50 mm dia nominal bore | Metre | 2680 | 762.15 | 20,42,562 |
| 58 | 25 to 40 mm nominal bore | Each | 3 | 911.9 | 2,735.7 |
| 59 | 50 to 80 mm nominal bore | Each | 3 | 1,785.35 | 5,356.05 |
| 60 | 25 mm nominal bore | Each | 10 | 622.4 | 6,224 |
| 61 | 40 mm nominal bore | Each | 3 | 826.1 | 2,478.3 |
| 62 | 50 mm nominal bore | Each | 3 | 1,026.65 | 3,079.95 |
| 63 | 15 mm nominal bore, 98 mm long, weighing not less than 75 gms | Each | 40 | 112.8 | 4,512 |
| 64 | 15 mm nominal bore, 80 mm long, weighing not less than 46 gms | Each | 40 | 95.75 | 3,830 |
| Schedule total | ₹4,77,75,570.59 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
DLC.pdf
ATTACHMENT
GCCUpdateduptoACS-7_1.pdf
ATTACHMENT
DESIGNMIXSystemimprovementguideline.pdf Design Mix system improvement
ATTACHMENT
SpecialConditions-Civilworks..1.pdf
ATTACHMENT
SpecialConditionsforPaymentofSteel4526.pdf Special conditions payment steel
ATTACHMENT
LaboratorySplconditions4526.pdf
ATTACHMENT
Systemimprovement-Sitelab.pdf
ATTACHMENT
ContractorseMBrecord4526.pdf
ATTACHMENT
ListofpprovedBrands260226.pdf
ATTACHMENT
ACS9GCC.pdf
ATTACHMENT
ACS10GCC.pdf
ATTACHMENT
ACS11GCC.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_8ACS-8.pdf
ATTACHMENT
TenderBooklet2026.pdf
ATTACHMENT
DESIGNMIXSystemimprovementguideline.pdf
ATTACHMENT
SpecialConditionsforPaymentofSteel4526.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].