Renovation of 03 Nos of Pump House inside ALHW campus at Campbell Bay in Great Nicobar Island.

Amount

Renovation of 03 Nos of Pump House inside ALHW campus at Campbell Bay in Great Nicobar Island.

Earth work in excavation over areas ( exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5 m disposed earth to the levelled and neatly dressed and including cost of all materials, and transportation charges, materials to work site, Cost of all labour charges, labour cess, minor tools and GST etc, complete. a) All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering and including cost of all materials, and transportation charges, materials to work site, Cost of all labour charges, labour cess, minor tools and GST etc complete.-All work up to plinth level a) 1:4:8 (1 cement : 4 mainland river sand : 8 graded stone aggregate 40 mm nominal size of Mainland Quarry)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, including all labour charges, labour cess, minor tools and GST etc.complete. All work up to plinth level :1:1.5:3 (1 cement : 1.5 mainland river sand: 3 graded stone aggregate 20 mm nominal size form Mainland quarry)

Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in lintels, beams and buttresses, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but excluding the cost of reinforcement with 1:1.5:3 (1 cement : 1.5 mainland river sand : 3 graded stone aggregate 20 mm nominal size from Mainland quarry) and including cost of all materials, and transportation charges, materials to work site, Cost of all labour charges, labour cess, minor tools and GST etc complete.

Centering and shuttering including strutting, propping etc. and removal of form work and including cost of all materials, and transportation charges, materials to work site, Cost of all labour charges, labour cess, minor tools and GST etc complete. : a) Foundations, footings, bases for columns

Providing and fixing tor steel reinforcement for RCC work including cost of steel, cutting, bending and placing in position cost of binding wire, labour charges, minor tools and GST etc, complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering and including cost of all materials, and transportation charges, materials to work site, Cost of all labour charges, labour cess, minor tools and GST etc complete. - All work up to plinth level a) 1:3:6 (1 cement : 3 mainland river sand : 6 graded stone aggregate 40 mm nominal size from Mainland Quarry)

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 meters lead of and including cost of all materials, and transportation charges, materials to work site, Cost of all labour charges, minor tools, labour cess and GST etc, complete. Asbestos Sheet

Dismantling cement concrete 1:3:6 or richer mix including disposal of dismantled materials, cost of all minor tools, labour chrages and GST as per the direction of EIC, and including cost of all materials, and transportation charges, materials to work site, Cost of all labour charges labour cess, minor tools and GST etc, complete.

Steel work in built up tubular (round,square or rectangular hollow tubes etc.) trusses etc., including cutting,hoisting,fixing in poistion and applying a priming coat of approved steel primer, including welding and bolted with special shaped washer and including cost of all materials, and transportation charges, materials to work site, Cost of all labour charges, labour cess, minor tools and GST etc, complete.

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as apporved by Engineer-in-charge) 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277,in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge.The sheet shall be fixed using self drilling /self tapping screws of size(5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and including cost of all materials, and transportation charges, materials to work site, Cost of all labour charges, labour cess, minor tools and GST etc, complete.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277,in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling /self tapping screws and including cost of all materials, and transportation charges, materials to work site, Cost of all labour charges, labour cess, minor tools and GST etc complete: a) Ridges plain (500-600mm).

Painting with ready mixed paint of approved brand and manufacture in all shades to give an shade New steel work (two coat) including cost of all materials, and transportation charges, materials to work site, Cost of all labour charges, labour cess and GST etc, complete.

Fabrication and fixing of MS Flat for wind ties over roof with GI 'L' Hooks and washers as directed by EIC including cost of M.S flat 40x 6 mm cost of all other materials all labour charges and transportation charges, minor tools, labour cess, GST etc,complete.

Providing and fixing of 20 cm thick masonry with Hollow Block of size 0.40m x 0.20m x 0.20m cast with cement concrete 1:3:6 (1 cement : 3 quarry dust and 6-11.2mm stone chips) curing, fixing with CM 1:4 in wall including cost of cement of grade 43, stone aggregate, quarry dust, all labour charges of casting, curing, walling,hire charges of Hollow block casting machine, cost of timber pallets and transportation charges of all materials to work site, all labour charges, minor tools and GST etc, complete.

Plastering in C.M. in 1:4 (1 cement: 4 mainland river sand) mix 12 mm thick floated hard trowelled smooth both sides of wall including cost of cement, scaffolding all labour charges, curing, all other materials, transportation of materials, cost of river sand, minor tools labour cess, minor tools and GST etc, complete.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge) With cement mortar 1:4 (1 cement : 4 fine sand) and including cost of all materials, and transportation charges, materials to work site, Cost of all labour charges, labour cess, minor tools and GST etc, complete.

Cement concrete flooring 1:2:4 (1 cement : 2 mainland river sand : 4 graded stone aggregate from mainland Quarry) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps and including cost of all materials, transportation charges, materials to work site, Cost of all labour charges, minor tools, labour cess and GST etc, complete. 40 mm thick with 20 mm nominal size stone aggregate

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built upstandard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 50 micron Powder coated aluminium, including cost of all materials, transportation charges, materials to work site, Cost of all labour charges, labour cess, minor tools and GST etc, complete.

Providing and fixing glazing in aluminium door, window ventilator , shutters and partitions etc. with PVC neoprene gasket etc. complete as per the architectural drawings and the direction of EIC ( cost of aluminium snap beading shall be paid in basic item).With glass panes of 5.5mm thickness (weight not less than 10.00Kg/Sqm and including cost of all materials, and transportation charges, materials to work site, Cost of all labour charges, labour cess, minor tools and GST etc, complete.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in anelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-Charge. Pre-laminated particle board with decorative lamination on both sides Labour cess, minor tools and GST etc, complete.

Providing and fixing anodised aluminium grill of weight not less than 2.07 kg/sqm (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment) and including cost of all materials, and transportation charges, materials to work site, Cost of all labour charges, labour cess, minor tools and GST etc, complete.

Distempering with 1st quality distemper (Ready mix) having VOC content less then 50 grams/litre of approved brand and manufacture to give an even shade, transportation charges of all materials to work site, all labour charges for cleaning the surface and painting over the cleaned surface, minor tools and GST etc. complete. a) Old work (one or more coats)

Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade and including cost of all materials, and transportation charges, materials to work site, Cost of all labour charges, labour cess, minor tools and GST etc complete.

Painting and finishing with antifungal paint ( two or more coats ) of approved brand and manufacture of required colour on under texture to give an evan shade at all locations prepared and applied as per manufacturer's specifications including preparation of surface ,cleaning of the existing painted surface, antifungal paint,brushes,sand paper,scaffolding and other materials required for this work, transportation charges of all materials to work site, all labour charges for cleaning the surface and painting over the cleaned surface, minor tools, labour cess and GST etc, complete.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws including cost of all materials, transportation charges, materials to work site, Cost of all labour charges, labour cess and GST etc, complete. 300x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws including cost of all materials, transportation charges, materials to work site, Cost of all labour charges, labour cess and GST etc complete. : 150x10 mm

Providing and fixing Aluminium Handle 100 mm ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws including cost of all materials, and transportation charges, materials to work site, Cost of all labour charges, labour cess and GST etc complete. A) 100 MM

KAKOLIL TRADE AGENCIES

S Durairaj