Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.4 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹23.0 L+₹3.3 L (16.7%)Rejected-Finance | L2 | Rejected-Finance Quoted amount higher than L1 | |
| 3 | L3₹23.1 L+₹3.3 L (16.9%)Rejected-Finance | L3 | Rejected-Finance Quoted amount higher than L1 | |
| 4 | L4₹23.5 L+₹3.7 L (18.9%)Rejected-Finance C O MR M K BHOWMIK NEAR TAPAN VARIETIES JOYNAGAR 06 AGARTALA TRIPURA W 799001 | WEST TRIPURA | TRIPURA | 799001 | L4 | Rejected-Finance Quoted amount higher than L1 | |
| 5 | L5₹23.5 L+₹3.8 L (19.0%)Rejected-Finance | L5 | Rejected-Finance Quoted amount higher than L1 |
Tender Value
₹22 L
EMD Value
₹44,000
Closing Date
2 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col N K Chaudhary
HQ 137 Wks Engr PIN 914137 c/o 99 APO
RE APPROPRIATION AND ADDN ALTN IN BUILDING NO P 130 AT MIL STN AGARTALA
2023_MES_605552_4
8691/E8
Open Tender
Civil Works
Item Rate
180 days
Agartala
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
AGE (I) Agartala
₹44,000
Yes
27 Jan 2024
18 Dec 2023
9 Jan 2024
18 Dec 2023
2 Jan 2024
26 Dec 2023
Amount
Demolition of cement concrete (unreinforced) in ground floors and paving n.exc.15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed.
Material and labour for 25mm thick PCC 1:2:4 type B-1, (using 20mm graded aggregate) as in sub base of floor and finish the surface fair and even to receive floor tiles complete all as specified and as directed.
Material & Labour for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, dark shade, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I).
Material & Labour for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, dark shade, area of each tiles not exceeding 0.36 sqm, as in skirting of wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick plaster / backing coat in CM 1:4 complete all as specified and directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I).
Material & Labour for joint free non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding 0.11 sqm but not exc 0.18sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of tiles including screed bed of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I)
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Material & Labour for joint free non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding 0.11 sqm but not exc 0.18sqm as in skirting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match the shade of tiles over and including rendering of 10mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I).
Material & Labour for joint free glazed ceramic coloured tiles 350 x 250 x 7 mm thick of premium quality as in skirting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match the shade of tiles over and including rendering of 10mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I).
Material and labour for complete removal of existing treatment of wall, making good any undulation and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over old prepared surfaces complete all as specified and as directed.
Material and labour for 3mm thick wall care putty on wall complete all as specified and as directed.
Material and labour for preparation of old decorative surface of ceiling, washing, rubbing down and stopping of distemper and painted surface and applying two coats of oil bound distemper complete all as specified and as directed.
Supply and fixing powder coated (minimum 50 micron thick) aluminium sliding type, three track window (two glazed and one gauged shutter), aluminium section weighing not less than 1.67 kg/m for frame and 0.55 Kg /m for shutter including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos.), suitable handle (1 No.) and 5.50mm thick tinted glass and aluminium mosquito proof gauge including taking down old existing steel window and making good disturbed surface of wall complete all as specified complete all as specified and as directed. (Note: Window opening size to be measured for payment purpose.)
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.
Materials and labour Brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.
Supply and fixing exposed GI powder coated snap grid frame for false ceiling of size 600mm x 600mm of wall angle 25x25x0.35mmwith main runner 38 x 24x0.70mm including Supply and fixing of 4 mm thick High Pressure Non asbestos Fibre Cement pre painted decorative board (E-board Classic) in a grid of GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing position for light fixtures, air conditioning diffusers and ducts, sprinkler, smoke detectors etc. The main runner to be secured to structural soffit by hangers @ 1200 mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450 mm from the adjacent wall, Flush fitting 1200 mm cross Tee to be interlocked between main runners @ 600 mm c/c so as to form 600mm x 600mm grid complete all as specified and as directed.
Material and labour for preparation of old decorative surface of wall, washing, rubbing down and stopping of distemper and painted surface and applying two coats of cement base paint complete all as specified and as directed.
Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and directed.
Material and labour for hardcore of broken bricks, gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, paving, footpath etc and finished the surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for precast cement concrete chequered tiles of size 200 x 200 x 25 mm thick shall be laid on floor etc set, jointed and pointed in neat cement slurry laid over and including 15mm thick screed bed / bedding layer in CM (1:4) complete all as specified and as directed.
Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc. complete all as specified and as directed.
Materials and labour for 10 mm thick rendering on fair faces brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.
Supply and fixing as in repair vitreoues china WHB white, flat back, of size 550X400mm including CP brackets, pillar tap 15 mm bore vhromium plated cast copper alloy with capstan heads, CP waste coupling 32 mm bore including 15mm bore PVC connection pipe 450mm long with PTMT nuts at both ends, 32mm dia PVC waste pipe complete all as specified and as directed.
Supply and fixing as in repair 10 litre capacity low level PVC flushing cistern white, syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed.
Supply and fixing as in replacement 125mm dia chromium plated shower rose with revolving joints fixed to 15mm bore GI Pipe complete all as specified and as directed.
Supply and fixing as in repair vitreous china squatting pan ‘Orissa pattern’,white, of size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet with integral foot rests, any pattern complete including provision of PCC bedding and connection to trap, flushing pipe, antisyphonage pipe, etc. including making good the disturbed floor complete all as specified and as directed.
Supply and fixing as in repair vitreous china bowl pattern urinal, flat back of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes complete all as specified and as directed.
Supply and fixing in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
Supply and fixing as in replacement 15mm bore dia bib taps cast copper alloy chromium plated, fancy type , long neck with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and as directed.
Taking up or down steel tubing 15mm bore and connections complete all as specified and as directed.
Supply and fixing 15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd.
Supply and fixing in repair 15mm bore stop valve, cast copper alloy, chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends fixed to GI pipe complete all as specified and as directed.
Taking up or down steel tubing 20mm bore and connections complete all as specified and as directed.
Supply and fixing 20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.
Material and labour for point wiring (surface type) for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping of suitable size with all accessories and PVC rectangular boxes for mounting switch, socket and fan regulator etc complete all as specified and as directed. Note: (i) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.
Supply and fixing ceiling rose, PVC/polycarbonate, isolated body surface bakelite, 62.5mm x 50mm, ISI marked three terminals complete all as specified & directed.
Supply and fixing Square recessed mounted Flat Panel LED Light of 36 Watt suitable for fixing in 2' X 2' Grid False Ceiling, 6500 K, with high transmitive diffuser for soft-light and glare free symmetrical illumination with all accessories internally prewired and including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down of old unserviceable tube light complete all as specified and as directed. Note: Light fitting shall be of PF>0.95
Material & Labour for sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.00 sqmm (Nominal area) drawn through in and including PVC Casing/ Caping with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.00 sqmm as earth lead and connected to earth dolly and including taking down old unserviceable sub main wiring of any description, making good to disturbed surfaces complete all as specified as directed. Note : (i) 3 Runs of 6.00 Sqmm cable and one run of PVC Casing/ Caping shall be measured as one unit length.
Material & Labour for sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.00 sqmm (Nominal area) drawn through in and including PVC Casing/ Caping with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.00 sqmm as earth lead and connected to earth dolly and including taking down old unserviceable sub main wiring of any description, making good to disturbed surfaces complete all as specified as directed. Note : (i) 3 Runs of 4.00 Sqmm cable and one run of PVC Casing/ Caping shall be measured as one unit length.
Supply & Fixing MCB DB, SPN, 8 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wall including taking down of existing unserviceable DB with MCBs including making good disturbed surfaces complete all as specified and as directed.
Supply & Fixing MCB SPN, 32 Amp having breaking capacity 10 KA, 240 Volt 'C' Curve complete all as specified and directed.
Supply and fixing MCB, single pole, 25 Amp, having breaking capacity 10 KA, 240 volts, 'C' Curve complete all as specified & directed.
Supply and fixing MCB, SPN, 40 Amp, having breaking capacity 10 KA, 240 volts, 'C' Curve complete all as specified & directed. Note for serial Item No. 43 to 46: MCB and MCB DB shall be of same make as approved by AGE (I).
Supply and fixing in repairs SP & N Enclosure with 2 Pole and Earth Metal Plug & Socket for incorporating SP MCB complete including One MCB, SP, 20 Amp, 240 Volts complete all as specified and as directed.
Supplying, installing, testing and commissioning of minimum 3 Star rated Hi-Wall Split Units Indoor / Outdoor with Cordless Remote Control Unit and with in-built advanced Air Ioniser and Plasma Filters for better indoor air quality with latest Inverter technology, having Eco friendly Refrigerant Gas, Copper Condenser Coil, EER 3.2 of Capacity 1.5 TR, Summer Cool, Dual Rotor Inverter Compressor, Automatic 4D Swing Copper Condenser, Motor, necessary copper pipe connections including cutting, bending, brazing, insulation on pipe etc, PVC Drain Pipe, electric connection between indoor and outdoor unit with suitable size PVC insulated, multi-stranded copper cable complete all as specified and as directed. Note: (a) The quoted rate is deemed to include cost of cutting chases / drilling holes through wall for connection to outdoor unit as required. (b)The rate quoted by the contractor is deemed to include cost of Powder Coated Mild Steel Fixing Brackets for Outdoor and Indoor Units at any height and Copper tube of suitable size and length and Drain Pipe made of High Density Polyethylene Pipes [HDPE] of pressure rating 6 KGf / Sq.cm of 25mm dia as per manufacturer's instructions upto 5m length.
M/S New Saha Enterprise
M/S PAUL ENTERPRISE
SHRI SUBRATA GUHA
M/S SANKAR GOPE
SHRI RAJESH DEY
M/S PRITAM ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .