SPECIAL REPAIR TO BUILDING NO P-500 OF TYPE-III, P-496 TO P-499 OF TYPE-II, P495-1 TO 08 OF TYPE-I AT ITR COLONY CHANDIPUR

Amount

Demolition of cement concrete (un reinforced) in floor and paving n exc 15 cm thick (above or below GL) complete all as specified and directed.

All as per item No - 1 here and above but Reinforced complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.

Demolition of brick work built in cement mortar incl quoin, arches etc complete all as specified and directed.

Dismantling water tanks (exc 250 litres and n exc 500 litres), complete all as specified and directed.

Taking up or down steel water tubing and connections incl cleaning for refixing or removal to stores for 15 mm bore , complete all as specified and directed.

Taking up or down steel water tubing and connections incl cleaning for refixing or removal to stores for 20 mm bore complete all as specified and directed..

Cutting chases in brick walls for concealed water tubing and making good in CM 1:3 exc 10 cm but n.exc 20cm girth complete all as specified and directed.

S&F 25mm outer dia of pipes 3 layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls,ceiling or in floor etc complete all as specified and directed.

S&F 20mm outer dia of pipes 3 layer PP-R polypropylene random copolymer)concealed pipes SDR 7.4(PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls,ceiling or in floor etc complete all as specified and directed.

Taking down cement plaster on wall; ceiling, roof etc incl raking out joints hacking for keys, scrubbing down with water etc complete all as specified and directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed..

Dismantling stone slabs of any description laid, bedded and pointed in any mortar complete all as specified and directed..

Taking down rainwater pipes including all fittings, including cleaning or refixing or removal to store complete all as specified and directed.

Taking down shutter of any description exc 1.00 sqm but n exc 2 sqm each, complete all as specified and directed.

Taking down chowkats or frame exc 1.5 sqm n exc 4 sqm with shutter ( without taking of shutters from frames ) complete all as specified and directed.

Taking down chowkats or frame n exc 1.5 sqm with shutter ( without taking of shutters from frames ) complete all as specified and directed.

M&L cutting holes brick wall exc half brick but not exceeding one brick built in cement mortar for inserting holdfasts & making good dismantled mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

M&L RCC 1:2:4 type B-1 (using 20 mm graded aggregates) as in shelves complete all as specified and directed.

M&L RCC 1:2:4, type B-1 (using 20 mm graded aggregates) as in chajjas and similar suspended work in any situation complete all as specified and directed..

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as specified and directed..

M&L for Form work to chajja, weather shades, cooking platform, shelves incl fair finish surface of the concrete slab.etc complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Treating backs of chowkats etc area tarred exc 0.1 sq.mtr but not exc.0.5 sq.mtr and treated with coal tar or tar complete all as specified and directed.

S&F 35mm thick 2nd class factory made HW glazed/ Skelton shutter, open rebated and prepared and to receive gauze etc without sash bar complete all as specified and directed..

S&F 35 mm thick plain framed factory made panalled shutters( two panels) with 12 mm thick veneered particle board with commercial face veneering on both face as panel inserts, styles & rails shall be of second class hard wood timber generally conforming to IS-1003(Part-I) (Door shutters) Kiln seasoned and chemically pressure treated complete all as specified and directed..

S&F 18 mm thick prelaminated particle board , interior grade , prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work including second class hardwood beading all around complete all as specified and directed.

S&F factory made solid panel PVC door shutter both sides prelaminated PVC sheet,stiles and rails feathered at edges 30 mm thick(style) conisiting of frame made out of M S tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail. Pannelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stile and rail with suitable PVC sheet bedding, and jointed together with solvent cement as per specification and drawing complete all as specified and directed..

S&F solid PVC door and window frame of size 50 mm x 47 mm made out of 5 mm wood grain printed sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed..

S&F 100 mm long aluminium,anodised barrel tower bolts of extruded section complete all as specified and directed..

S&F 250 mm long Aluminium alloy anodised sliding door bolts with hasp,staple (bolt type) complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges medium weight , cold rolled and fixed complete all as specified and directed.

S&F 125 mm size alumunium handle, cast type, anodised complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire stapple in repairs complete all as specified and directed.

All as per item No.36 here-in-before but supplying and fixing on new doors and window complete all as specified and directed.

S&F 20 mm dia stainless steel curtain rod fixed in repair complete all as specified and directed.

S&F curtain rod fancy bracket fixed in repair complete all as specified and directed.

M&L MS framed guard bar for window and ventilator conforming to fe-410 or fe-310 including taking down old complete all as specified and directed..

M&L MS flat iron for hold fast and similar item conforming to Fe-290 Gde , E-165 complete all as specified and directed.

M&L mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required, hooking end and binding with MS wire (annealed) not less than 0.90 mm dia complete all as specified and directed.

Ditto item No 42 above but 6 to 8 mm dia TMT bar .

M&L running welding for new reinf with old reinf for binding exc 6mm but not exc 9 mm complete all as specified and directed.

Supply and Fixing powder coated (minimum thickness of 50 micron) aluminium frame for doors, windows with one or more rebates including joining cleat for fixing etc. complete all as specified

Supply and Fixing powder coated three tier aluminium window and ventilator shutter (two nos glass & one wire mesh) type without sash bars , aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws , anodised aluminium fittings complete all as specified.

Supply & Fixed 5 mm thick plain sheet glass exc 0.5 sqm in each pane fixed to aluminium door frame complete all as specified and directed.

M/L for PCC avg 50 mm thick type C'1 1:3:6 (20mm stone aggregate) as in plinth protection, finished even and smooth without using extra cement complete all as specified and directed..

M/L for PCC avg 75 mm thick type C1 1:3:6 (20mm stone aggregate) as in paving, finished even and smooth without using extra cement complete all as specified and directed..

M&L PCC 25 mm thick PCC 1:2:4 type B-0 ( Using 12.5 mm graded aggregates), for laying floor finishes such as tiles etc complete all as specified and directed.

M&L 40 mm thick PCC 1:2:4 type B-1 ( Using 20 mm graded aggregates), in floor and steps, landing etc incl finishing the surface even and smooth without using extra cement complete all as specified and directed..

M & L avg 25 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof padding complete all as specified

M&L roof treatment using APP based polymeric membrane minimum weight 3.5 kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) over a coat of bitumnious primer and bonding surface by forced application, including taking down old felt complete all as specified and directed by Eng-in-charge.

M&L Rendering 10 mm thick cement plaster in CM 1:4 on roof surface complete all as specified and directed. .

M&L Glazed ceramic coloured tiles 400 x 350 X 7 / 300X450X7 mm thick white or coloured tiles as in dado, skirting and vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match with tiles complete all as specified and directed..

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm ( 300 x 300 mm ) in floors etc set & jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm ( 400 x 400 mm) in floors etc set & jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles complete all as specified and as directed.

M & L granite slab (of any type) 18 to 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing complete as in cooking platform complete all as specified and directed.

M&L 20 (+) 2 mm thick machine cut kota stone slab of any size as in staircase steps over screedbed laid jointed with grey cement slurry mixed with pigment to match the shed of the slab includding rubbing & polishing complete all as specified and directed.

M&L chequered cement concrete prepolished tiles 20cm X 20cm X 25mm thick set jointed & pointed in neat cement slurry with grey cement & pigment in floor

M&L for 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes for non skid ceramic,kota stone and granite tiles complete all as specified and directed.

M&L rendering 10 mm thick cement plaster in CM 1:3 on fair faces of brick Work (internal surfaces) for fixing of wall tiling complete all as specified and directed.

M&L rendering 5 mm thick cement plaster in CM 1:3 on fair faces ceiling , Chajja, shelves and surface to be even and fair without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick cement plaster on internal surfaces of brick work in CM 1:6 and surface to be finished even & smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick cement plaster with WPC @ 3% of wt of cement on external surfaces of brick work in CM 1:4 andn surface to be finished even & smooth without using extra cement. (WPC will be measured and paid separately) complete all as specified and directed.

Supply only WPC ISI marked complete all as specified and directed.

M&L Preparation of old plastered surfaces of ceiling and applying one coats of white wash complete all as specified and directed.

M&L Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L Preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified and directed.

M&L Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L applying one coat of wall putty cutting, rubbing, with sand paper finish smooth and applying two coats acrylic distemper (oil bound distemper) over a coat of wall primer incl preparation of surfaces in new plaster surface complete all as specified and directed.

Removing completely existing treated surface and applying one coat of ready made wall putty cutting, rubbing, with sand paper finish smooth and applying two coats acrylic distemper (oil bound distemper) over a coat of wall primer incl preparation of surfaces complete all as specified and directed.

Complete removal of existing treatment and applying two coat of weather coat on external wall surface over a coat of putty with primer as directed by Engr-in-charge

Preparation of new plaster surface of wall and apply two coat of weather coat over a coat of putty with primer on external surface complete all as specified and directed.

M&L Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L two coat syenthetic enamel paint over a coat of red oxide primer on new steel surface with complete preparation of surface complete all as specified and directed.

Writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high complete all as specified and directed.

Writing stops, commas, shortlines, dashes ,hyphens, brackets with synthetic enamel paints all as specified and directed by engr-in-charge.

S&F 50 mm dia HDPE pipe of pressure 6 Kg / sqcm fixed complete to walls/floor complete all as specified and directed.

S&F in repairs 500 litre capacity rotational moulded polythylene water storage tank ( cylindrical vertical with closed top) hoisted and fixed in position all as per specified in SSR part-I complete all as specified and directed.

S&F of 20mm bore dia gate valve as in repair complete all as specified and directed.

S&F 15 mm dia fancy type CP bib taps with flange cast copper alloy with crutch or butterfly handle, screwed down fixed in repairs complete all as specified and directed.

S&F 15 mm dia fancy type CP pillar taps, cast copper alloy with capstan head, chromium plated screwed down fixed high pressure, long screwed shanks and fly nuts, screwed for iron pipe fixed in repairs complete all as specified and directed.

S&F 15 mm dia CP concealed type stop valves/ angular stop valves with flange cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions fixed in repairscomplete all as specified and directed.

S&F PVC ball valves high pressure with polythene float and fly nut complete, screwed for iron pipe of 20mm bore in repair complete all as specified and directed.

S&F PVC grating doom 100 mm dia of PTMT complete all as specified and directed.

S&F PVC connection pipe 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F PVC (SWR & RWP) pipes single socketed in any length with rubber ring joints of dia 110mm fixed in repair complete all as specified and directed.

S&F PVC (SWR & RWP) bends any radius of bore 110 mm incl. With access door fixed in repair complete all as specified and directed.

S&F PVC (SWR & RWP) junction single (double 'T') equal or un equal of bore 110 mm incl. With access door fixed in repair complete all as specified and directed.

S&F PVC (SWR & RWP) floor trap plain with grating inclu. Jointing with solvent cement of out let dia 75mm fixed in repair complete all as specified and directed.

M&L for vitreous china squatting pan of Orissa pattern size 580 X 440 mm white with intregal foot rest (excluding flushing cystern and flush pipe) in repairs complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern) including 'P' or 'S' Trap with necessary, fixing arrengement as in repairs in floor complete all as specified complete all as specified and directed.

S&F Plastic water closet seat cover white with recessed bottom and cover fixed with aluminium hinging device in repair complete all as specified and directed.

M&L PVC valve less syphonic action type flushing cistern 10 ltr capacity low levelhigh level white with inlet ball valve , float flush pipe and handle including bracket in repair complete all as specified and directed.

S&F vitreous china wash hand basin white, flat back, size 550x400 mm with brackets including cutting for and pinning in end of brackets including waste pipe and waste coupling in repairs complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard railing 60 cm long in repairs complete all as specified and directed.

S/F brass chromium plated shower rose 125 mm size with shower arm and flange fixed in repair. complete all as specified and directed.

S&F stainless steel sink, 1.00 mm thick for kitchen with plug, waste pipe, washer including cantilever cast iron bracket, connecting union to pipe, overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm fixed in repair complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack of 1 mm thick of approved make with plugs, washers, over all size 750mm x 600mm complete all as specified and directed.

S&F stainless steel tubular towel rail 20mm dia "D" type 60 cm long between flange fixed in repair complete all as specified and directed.

S&F CP soap case in repair complete all as specified and directed

M&L One coat of Nito bond EP applied on old concrete surface by brushing or spraying before placing new concrete .(it is required for bonding new concrete & old concrete) complete all as specified and directed.

M&L 10mm thick cement mortar (1:3) mixed with TUFF SHIELD) mortar plus of Nito bond SBR @ 10 ltr/bag of cement of M/S FOSROC (as per manufacturing 's instruction ) shall be applied for as secondary protection over bottom and side wall complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (Light, Fan, Lamp holder, Socket or power) complete including taking out unservceable fitting fixture removing materials to store for keeping in safe custody for reuse at site or for taking credit (credit for above items should be made as per conditions separately) and making good distrubed surfaces of wall floors etc.

M&L for point wiring with PVC insulated unsheathed stranded copper conductor FRLS cable of size 1.5 Sqmm with PVC insulated unsheathed stranded copper conductor FRLS cable of size 1.5 Sqmm for earth continuity wire to be drawn in and including PVC in concealed wiring heavy duty in concealed wiring, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick or PVC moulded switch board ad brass screws with cap washers for one light/Fan point controlled by one single way switch including all necessary wall cutting and making good disturbed surface all as directed and specified.

All as per item No 109 above but for call bell point complete all as specified and directed.

All as per item No 109 above but for independent 5 Amps switch socket out let using 1.5 Sqmm wire with 1.5 Sqmm wire for earth continuity conductor complete all as specified and directed.

All as per item No 109 above but for 15 Amps switch socket out let using 4.0 Sqmm wire with 4.0 Sqmm wire for earth continuity conductor on independent board complete all as specified and directed..

Supply and fixing including connection of switch piano flush button type single pole one way 5 Amps complete all as specified and directed.

Supply and fixing including connection of switch socket out let 5 Amps 2/3 pin flush type complete all as specified and directed.

Supply and fixing including connection of switch socket combination 5 in 1.3 pin 5/15 amps flush type universal.

Supply and fixing including connection of call bell Ding-Dong AC 230 Volt Single pole complete all as specified and directed.

Supply and fixing including connection of bell push flush type 5 Amps complete all as specified and directed.

Supply and fixing an ceiling rose, surface bakelite 65 mm x 50 mm three terminal complete all as specified and directed.

Supply and fixing of stepped type electronic fan regulator flush type on the existing phonolic liminated sheet etc, as required complete all as specified and directed.

Taking down old serviceable celing fan including carrying out servicing and painting with one coat of synthetic enameled paint by spraying including filling cavities with filler, cleaning all dust etc & writing necessary MES No at two places on the fanand refixing fan in its own position after completion of necessary ceiling work complete all as specified and directed..

Taking down unserviceable sub main/sub circuit wiring of any type and size including conduit batten wring for necessary repair/replacement complete all as specified and directed.

M&L for sub main wiring power/circuit using FRLS PVC insulated unsheathed, stranded copper conductor cable of size 2 x 4.0 Sqmmm and earth continuity conductor of size 1 x 4.0 Sqmm to be drawn into and including PVC coduit complete all as specified and directed.

S&F LED Tube light batten fitting with extruded Aluminium housing with diffuse including T-8 T/L of 1 x 18 Watt complete all as specified including taking down old existing light fitting complete all as per site requirement complete all as specified and directed.

Supply and fixing of MCB DB double door, made of sheet steel phosphates, powder painted with bus bar, neutral link, earth bar and din rail SPN 8 way with 200 Amps bus bar including taing down old one with all acessory complete all as specified and directed.

Supply and fixing of MCB DB double door made of sheet steel phosphates power painted with bus bar neutral link, eath bar and din rail TPN 4 way with 200 Amps rated bus bar 415 Volt including taking down old one with acessary complete all as specified and directed.

S&F MCB 06 to 32 Amps 230/240 V SP 'C' Series complete all as specified and directed..

Supply and fixing MCB 32 Amps 230/240 V SPN B Series complete all as specified and directed.

Supply and fixing MCB 40 Amp 230/240 V SPN B Series complete all as specified and directed.

Supply and fixing isolator 63 Amp TPN 415 Volt B series complete all as specified and directed.

M&L for lamp holder PVC Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

Supply and fixing LED lamp 9 watt for batten holder complete all as specified and directed.

M&L for earthing with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6.0 mm buried directly in ground (earth pit not less than 2,25 Mtr below normal ground level) connected to glavanised earth lead 4 mm dia wire as earthing lead by means of bolts, nuts, check nuts and washers of galavanised irion or steel including 15 mm dia medium grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm dia, charcoal or coke and common salt in alternative layers of 15 cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type C1, 50 mm thick precast RCC (1::4) type B1 pit cover reinforced with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including galavanised lead wire of size 4 mm for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a distance not exc 50 mtr and necessary connection and testing complete all as shown in electricl plate No 3 of SSR Pt-I and all as directed and specified.

Taking down unserviceable LT cable of any size complete all as specified and directed.

S&F laying or encase in GI pipe of cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade cross sectional area 35 Sqmm 3.5 core. Note GI pipe shall be measured and paid separately.

Excavation in trenches not exc 1.5 m deep and n.exc 1.5 m wide and getting out in soft/loose soil for foundation etc or for shafts, wells cess pits, manholes etc n.exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil laying of cable line etc complete all as specified and directed.

Returning filling in including spreading, leveling watering and well ramming layer not exceeding 25 Cm complete all as specified and directed.

Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Supply and laying approved quality sand underneath and all around the U/G Cable in trenches for cable cushioning all as specified and directed.

M&L sub class 'B'Bricks laid flat, transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable complete all as specified and directed.

M&L for GI pipe 50 mm dia light grade with all fitting to walls and ceiling or laid in trenches/for cable protection including taking down existing pipe complete.

M&L for cutting chases, pinning in making good of PCC hard standing to facing where required and pointing in cement mortar 1:3 exc 10 cm but not exc 20 cm girth to ends or edges of landing steps, cills, sunshades, shelves, lintels etc and cutting chase for concealed water tubing or concealed conduit wiring laying of cable and making good with old shape and size all as specified and directed.

M&L for cutting bituminous road in making good with facing where required and pointing exc 30 cm but not exc 1.0 mtr girth to ends or edges of landing steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring laying of cables and making good with old shape and size all as specified and directed.

jlenterprise

RANA ENTERPRISES

ANIL KUMAR BISWAL

CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION