Misc. repair and finishing works required for housing of Telephone Exchange Equipments in 02 nos. Type-III GF/FF staff quarters at TE Compound Meham.

Amount

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level

Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately)

Kiln seasoned and chemically treated hollock wood (a) 35 mm thick shutters

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

Using flats 30x6mm for diagonal braces and central cross piece

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.

With cement mortar 1:4 (1cement: 4 coarse sand).

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

12 mm cement plaster of mix :

1:6 (1 cement: 6 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix :

1:6 (1 cement: 6 coarse sand)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete :

New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

Old work (one or more coats)

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work.

One or more coats on old work.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes.

110 mm diameter

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge..

In cement mortar

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

Of area 3 sq. metres and below

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall.

15 mm dia. nominal bore

20 mm dia. nominal bore

25 mm dia. nominal bore

40 mm dia. nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length

15 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (Flexible pipe.)

32 mm dia

Providing and fixing PTMT bib cock of approved quality and colour. a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing PTMT pillar cock of approved quality and colour . a) 15mm nominal bore, 107 mm long. Weighing not less than 110 gms.

Providing and fixing PTMT stop cock of approved quality and colour.

15 mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated luminium rod with L.P./ H.P.H.D. plastic ball.

20 mm nominal bore, 120 mm long. Weighing not less than 198 gms.

25 mm nominal bore, 152 mm long. Weighing not less than 440 gms.

Finishing walls with Acrylic Smooth exterior paint of required shade :

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).

Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power drivenpercussion type or of approved make including apering of all edges,making square shoulders of cavities including cleaning the exposedconcrete surface and reinforcement with wire brushes etc. anddisposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge

25 mm average thickness

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.

SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).

25 mm average thickness in 2 layers.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :

12mm thick ply wood

Welding at site i/c transportation of electric welding set for repairing of section windows, M.S. grills, steel chowkhats, hinges, steel jafferies and other steel members (Upto any floor level) i\c welding, hammering, etc for the smooth operation of the fittings, welding of broken part by welding. (Rate includes cost of labour i.e one welder and beldar and electrodes , tranportation of the welding set and movement of welding set but excludes the cost of the steel members and fittings if required) all complete as per direction of Engineer-in-charge.Rate is for single day in one building compound.

Removing blockage of existing sewer line by desludging , making arrangement of rodding , pumping , cleaning the sludge and disposal of the same beyond the municipal limits in prescribed environment friendly manner by mechanical transport then cleaning the sewer line with fresh water complete as per the site condition & as per direction of Engineer-in-Charge including pre-monsoon precautionary measures. .

Cleaning of existing manholes by desludging & making arrangement of rodding , pumping & cleaning the sludge and disposal of the same beyond the municipal limits in prescribed environment friendly manner by mechanical transport then cleaning the walls & floors with fresh water complete as per the site condition & as per direction of Engineer-in-Charge .(Circular or rectangular manhole of any depth or size)

Providing and fixing brass ball valve with of approved quality (screwed end) :

15 mm nominal bore.

20 mm nominal bore.

25 mm nominal bore.

Providing and laying homogeneoous polyvinyl chloride sheet/ tile antistatic flooring and skirting in approved pattern on a smooth and damp proof base using rubber base adhesive of approved quality and manufacture like dunlop, S-758 or favicol SR-998 or equivalent including rolling with wooden wooden roller weighing about 5 kg all complete as per the direction of Engineer in charge in approved colour and shade of polyvinyle floor decvinly flooring marble vinyle flooring or equivalent make.

2.00 mm thick

Providing and fixing 25 mm wide, 200 micron thick copper strip and jointed with copper rivets under antistatic flooring including making holes in the strip etc. Complete in all respect as per the direction of Engineer- in- charge

Taking out old grown trees /plants at different location such as shafts balconies, roof etc upto floor five level including demolishing brickwork, cement concrete so as to remove the roots of the tree/plants all complete and repairing the same with old bricks with cement mortar 1:6 (1 cement : 6 coarse sand) and providing and laying new cement conctrete 1:2:4 (1 cement : 2 Coarse sand : 4 stone aggregate 20 mm nominal size) and finishing with cement plaster of mix 1:4 (1 cement : 4 coarse sand) as per site requirment and disposal of the building rubbish etc & like all complete as per the direction of the engineer in charge. (Note: the agency executing the work shall have to make his own arrangement of scaffolding, jhulla etc and other T & P and labour required for the item)

Cleaning of terrace i/c khurrah by sweeping with bamboo sticks, removing malba/ garbage from terrace to ground and disposed off out side the compound in any MC dump as per direction of E-In- Charge

Grading roof for water proofing treatment with a) Cement mortar slurry of mix 1:3 ( 1 cement: 3 fine sand mixed with water proofing chemical of approved brand and manufacturer in ratio as specifeid complete as per direction of E-In-Charge)

Credit for self disposal of recovered unserviceable material from the site

Unserviceable O/H PVC tank of 500 litre capacity

Unserviceable door

Steel

Bidder Name

satpal juneja