PROVN OF 16 X MAJOR MD ACCN (GRIHA 3 STAR RATING) AT TIBRI MIL STN.

Amount

Note:- Please refer Schedule 'A' Notes given on serial page No. 19(R), 20 to 22, 23(R) to 25(R), 26 to 30 of tender documents.

LUMPSUM/ OTHER PRE-PRICED PROVISIONAL SCHEDULES OF WORKS

Lump sum price worked out by the contractor for BUILDING WORK as listed in Schedule 'A' Part-I brought forward from serial page No.31.

Lump sum price worked out by the contractor for EXCAVATION AND EARTH WORKS as listed in Schedule 'A' Part-II brought forward from serial page No.32.

Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-III brought forward from serial page No. 33 to 37.

Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-IV brought forward from serial page No. 38 & 39.

Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule 'A' Part-V brought forward from serial page No. 40 & 41.

Lump sum price worked out by the contractor for AREA DRAINAGE WORKS as listed in Schedule 'A' Part-VI brought forward from serial page No. 42.

Lump sum price worked out by the contractor for CHAIN LINK FENCING AND STEEL GATE WORKS listed in Schedule 'A' Part-VII brought forward from serial page No. 43 & 44.

Lump sum price worked out by the contractor for ROAD AND PATH WORKS as listed in Schedule 'A' Part-VIII brought forward from serial page No. 45.

Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-IX brought forward from serial page No. 46 & 47.

Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-X brought forward from serial page No. 48 to 51.

Lump sum price worked out by the contractor for DG SET WORK as listed in Schedule 'A' Part-XI brought forward from serial page No. 52.

Lump sum price worked out by the contractor for LIFT WORK as listed in Schedule 'A' Part-XII brought forward from serial page No. 53.

Lump sum price worked out by the contractor for FIRE FIGHTING, FIRE ALARM & DETECTION SYSTEM WORK as listed in Schedule 'A' Part-XIII brought forward from serial page No. 54 & 55.

Lump sum price worked out by the contractor for LIGHTENING PROTECTION WORK as listed in Schedule 'A' Part-XIV brought forward from serial page No. 56.

Lump sum price worked out by the contractor for SOLAR WATER HEATER WORK as listed in Schedule 'A' Part-XV brought forward from serial page No. 57 & 58.

Misc items of Works (To be quoted by Bidder) as listed in Schedule 'A' Part-XVI

INTERNAL WATER SUPPLY WORKS

Supply & fixing 15mm CP brass health faucet (hand shower), inlet length 100mm fixed to angle valve with and including decorative choice flexible pipe, wall hanger etc complete all as specified and directed.

Supply & fixing 15mm bore fancy type central hole single lever basin mixer with 450 mm braided connection pipe complete all as specified and directed. Make Cera Model No F2013451 / JaquarQQP‐CHR‐7167BPM / Roca T5A8497CA1 / Kohler Model no. K‐ 27484IN‐4‐CP

Supplying and fixing two way bib cock with single handle and wall flange 15mm dia, fancy type chromimum plated complete all as specified and directed. Make Cera Model No F2013163 / Jaquar LYRCHR‐38041 / Kohler Model no K‐16094IN‐4‐CP / Roca Model no.RT5A937ACA1

Supply & fix 15 mm bore Sink Mixer with Swinging Spout (Wall Mounted) with 150mm long swivel spout Connecting Legs & Wall Flanges complete all as specified and directed. Make Cera Model No F2013501 / JAQUAR Model no ARI‐CHR‐39165 / Kohler Model no. K‐20591IN‐4‐CP / Roca Model no. RT5A8497CA1

Supplying and fixing Wall Mounted Bib Cock, Chromium Plated, with wall flange & aerator (Cera Cat no. F1015151) / Jaquar‐ 16094IN‐4‐CP/ Roca RT5A937ACA1 / Kohler Model no 16093IN‐4‐CP

Supplying and fixing 32 mm UPVC Ball valve with screwed both ends pipe and fixed all as specified and directed

INTERNAL ELECTRIFICATION WORKS

Material & labour for point wiring with 1.5 sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit medium grade 20mm dia (minimum) or higher size as specified and cutting chasing on wall complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc/ fittings ISI marked for modular fittings and brass screws and cup washers including 1.5 sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed. Note:- Cost of Metal boxes and modular accessories like cover plates will be paid seprately in respect items (a) Fan point/ exhaust fan point /one light point/bell/buzzer controlled by one switch/bell push.

(b) One modular socket outlet 5 pin 5 Amp controlled by one, one way switch on same board.

(c) One modular socket outet point 5 amps on the independent board.

(d) One light point controlled by two nos of two way switch.

All as Ser item 4.02 here in before but with 2.5 sq mm wire and earth wire of 2.5 sq mm for 3 Pin 15 Amp modular type socket outlet.

Supply and fix modular metal flush box made out of GI sheet, thickness not less than 1.2mm with earthing terminal, 8 module complete all as specified and directed.

Supply and fix modular metal flush box made out of GI sheet, thickness not less than 1.2mm with earthing terminal, 12 module complete all as specified and directed.

Supply and fix modular Dummy plate complete all as specified and directed.

Supply and fix LED energy efficient LED bulb B22, 9 watt complete all as specified and directed.

Supply and fixing VTPN DB’s 4 Way, Double door, 415V, IP43, suitable size and length of CRCA steel sheet, dust protection duly powder painted including factory fitted suitable size copper bus bar, 01 No of MCCB TPN as incomer and 04 Nos TP as outgoing with neutral link, earth bar, din bar for mounting MCB and blanking plate a complete all as specified and directed. Note:- MCB shall be measured and paid for separately.

Supply and fixing TV socket and connector complete with all necessary fittings all as specified and directed.

Material & labour for wiring with 1100 volt grade one single core FRLS Wire PVC insulated and unsheathed cable with stranded copper conductor 1.5 sqmm (FOR INVERTER) drawn into PVC conduit with all accessories fixed concealed complete all as specified and directed.

Supply and fix LED tube light fitting for all purpose surface and wall mounted with single side connection polycarbonate LED batten with 125 Lum/watt system efficancy aluminium housing and integrated electronic driver of capacity 20 W, four feet and connection with PVC insulalted twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed. Make: Havells cat part No. ENDURALINEARPROBS20WLED865SPCSSIND or equivalent make of Bajaj/Crompton/ Philips.

Supply and fix wall/ceiling mounting LED 9/10 Watt tube light fitting with aluminium housing and integrated electronic driver complete with all acessories 1x9 Watt LED, with CCT of 6000k suitable for domestic application, 240 Volts, 50 Hz, and internally pre-wired with 1.5 sqmm twin twisted flexible cable copper conductor and connection complete all as specified and directed. Make: Havells cat part No. LUMILINEBS9WLED865SPCWH or equivelent make of Bajaj/ Crompton/ Philips.

Supply and fix bldg street fitting made up of pressure dai cast aluminum housing with high efficiency LEDs as a lighting source and lens embedded PC Cover Having TOP oppening seperate driver compartment with IP 66 protection and impact resistance of IK07, CCT 5700 K, of wattage 25 Watt including connection with 3 core PVC insulated overall sheathed flexible cable with multi stranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal all as specified and as directed. Make :- Havells/ Bajaj/ HPL/Philips

Supply and fix GI pipe bracket made of GI pipe light grade 32mm dia and bend to shape 1.5 mtr long MS clamp made out of MS flat iron of size 32mm x 3mm with nut and bolts washer complete including drilling of holes for nut and bolts etc complete all as specified and directed.

Supply and fix energy saving new generation 10 watt LED built up, 6000k bulk head luminaire with opal diffuser light fitting complete with all acessories and connection complete.

Supply and fix Kitchan Wall Fan 300 mm sweep, 1350 RPM, of Elegantly designed fan base in round shape for 50 cub mtr/min air delivery and minimal noise levels with pull code control for speed & oscillation upto 90 degree total flexibility, double 'z' shielded ball bearing, sturdy brazed wire guards with power coating ensures corrosion resistance conforming to IS 2997-1964 complete all as specifed and directed.

Supply and fix Kitchan Chimney Dry Heat Auto Clean Technology Stainless with Air outlet 150 mm, Steel Finish Front Matte Black Glass panel with Digtal Display Touch Control Panel with 3 Speed Gesture motion, Heavy Duty Baffle Filters, minimium Air flow 1180 M3/h Energy Saving LED Light of suitable wattage, Copper winding BLDC Motor, 62dba max noise level and voltage 220-240 V/50 Hz including making hole in the wall and making good the distubed surface of wall including all accessories all as specified and directed. Make : KAFF Model No.SKU NEVISHC90 or eqvt in Hindware/ Faber.

Supply, installation, testing & commissioning of 3-Φ, 4 Wire, AC Static Direct connected, Smart Pre-paid Energy Meters, ISI marked of different makes as per BIS-16444, with communication technology including GPRS/RF/Hybrid (RF Mesh Network+GPRS)/any other advanced technology as per CEA/TRAI regulations) with current range 10-60 Amp, 415 V, accuracy class 1.0 UC1 category and above along with in-built load control switch, containing provision for TOD & RTC, capable to define multiple tariff slabs complete all as specified and directed. Meter should support the following data:- (i) 15 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, daily and monthly billing survey for Cumulative Energy and Max Demand (ii) Meter should have connect / disconnect functionality operable for MDM/billing software and prepaid features would be operable for MDM / Billing end as per IS: 15959 Part-2. (iii) Meter should support communication protocol through RF/ 5G/4G/NB IOT with the existing software in stn all as required at site and directed (cost of 5G/4G/NB IOT sim with two year recharge facilities, mapping, vending portal charges etc deemed to included in rate quoted for meter). (iv) The meter should support open communication protocol DLMS with the existing software. Make: Anchor/L&T/HPL/Secure. Note:- (i) The smart meter would be compatiable with existing software/DCU in Stn. (ii) The rate of sim as well as data pack of 24 months from date of completion for connectivity is deemed to be including in the quated rates.

Supply & fixing of Transparent polycarbonate Meter Box of suitable size with IP-54 for 3-Φ, 4 wire, Smart Energy meter mentioned here-in-above at Sch. Item No. 4.21. The Polycarbonate meter box shall comply with IS-14772:2000 and IS-11000:1984. It shall be totally shock proof, safe weater proof, rust roof, dust proof, water proof, halogen free, silica free and having internally embeded gasket technology, transparent hinged lid and sealing provision including bakelite connector, complete all as specified and directed. Make: Anchor by Panasonic/L&T/ HPL/Secure.

CHAIN LINK FENCING & STEEL GATE WORKS

Supply only 3.15mm dia PVC coated galvanised steel wire chain link fencing, size of mesh 75x75mm complete all as specified directed.

EXTERNAL WATER SUPPLY WORKS

Design, supply & fixing fully automatic starter suitable for 415 V AC for capacity 7.5 HP Motor, conforming to IS/IEC 60947-4-1, provided with Protection Degree IP 54, with 1 No TP MCB 20 Amp/10 KA, 1 No TP Contactor 20 Amp, 1 No Over laod realy 12-18 Amp, Amp meter, 1 Set CT's 30/5 A and 1 set indicator RYB LED type SPP with automatic switch, max operating current 25.3 Amp complete all as specified and directed.

Supply & fix 80 mm foot valve conforming to IS-4038 for suction line complete all as specified and directed.

Material & labour for valve pits and constructing of brick masonary pits of internal dimensions 900mm x 900mm x 900mm (bottom PCC floor of the pit should be minimum 30 cms below the bottom surface of sluice valve flange to provide sufficient working space), bottom floor of the pit be constructed in PCC (1:3:6) 51 cms thick with 20 mm stone aggregate, inner and exposed surfaces and bottom floor of the pit should be plastered in CM (1:4) 15 mm thick. The sluice valve and other fittings should be housed in center of the pit. The verticesof the pit should in right angle and champhered. The top cover of the pit will be made out of MS sheet min 2 mm thick with angle iron frame made out of MS angle 50mm x 50mm x 6mm with galvanized steel hindges two nos and locking arrangements duly painted with two coats of water resistant synthetic enamelled paint over one coat of red oxide complete all as specified and directed.

Incomer of LT Panel:- (i) Aluminium TPN bus bar strip of rating 63 Amps fixed on epoxy insulator -04 No. (ii) MCCB 4 pole 32A, alongwith spreader terminal with adjustable thermal magnetic setting-01 No. (iii) Multifunction digital meter to measure voltage, current,KWH,PF,Amp with CT's set with suitable size.-01 Nos (iv) Indicating Lamp LED type 240 Volts AC set of three colour (RYB)-01 set Outgoing feeders:- (i) MCCB 40 Amps, 4P, 16 K, 415 V, 50Hz with adjustable thermal magnetic setting-02 Nos. (ii) MCB 32 Amp, SPN 10 KA-02 Nos. (iii) All accessories prewired with copper conductor cable single core of suitable size including suitable size of thimble.

Material and labour for taping from existing DI 150 mm to GI 80 mm including cutting, jointing, inserting Tee and alll accessories complete all as specifed and directed. Note:- Sluice valve shall be measured and paid separately under respective items.

Supply & fix copper cable 10 Sqmm Electric power cable-04 Core from motor to Starter Panel in conduit complete all as specified and directed.

EXTERNAL ELECTRIFICATION WORKS

Supply, install, testing and commissioning of LT Distribution Panel (CPRI type tested ) cubicle type IP-65, outdoor type confirming to IS-61439 factory fabricated prewired made out of 3.15 mm thick CRCA sheet outer & 2 mm thick CRCA sheet inner of suitable size to accommodate all accessories/fittings compartmentalized in construction to accommodate the incoming/outgoing MCCB and TPN bus bars and outgoing feeders. The TPN bus bars shall be insulted with colour coated heat shrinkable sleeve and shall be mounted on DMC support. The incoming as well as outgoing MCCBs shall have extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders. The extension links shall be supported on DMC support having provision for termination of incoming and outgoing cables. All extension links/ interconnections shall be colour coated sleeves. The cubicle shall have frame work at bottom of MS channel MC 100 fixed to the top of plateform. The plateform of LT panel shall be pedestal type of suitable width and 600 mm height above ground level and minimum 400 mm below the ground level constructed with bricks (sub class'B') work duly plastered in CM 1:3 and PCC copping (1:2:4) not less than 50 mm thick over brick pedestal with adequate opening for entry of cable complete as per manufacture recommendation and directed by the Engr-in-Charge. A detachable gland plate of thickness not less than 3 mm thick should be used at the bottom for entry of armoured cable of adequate size compression glands, the panel shall be painting with powder coated finish with RAL 7032 SIEMENS GRAY Structure after seven tank phosphate treatment front & back opening type and fixing 2 Nos danger notice plan with letter figures and conventional skull bones in signal red colour and fixed front & back door to LT Panel with voltage and danger indicated in Hindi and English with double door shutter and shall have louvers and air vent gasket for natural flow of air Neoprene adhesive type gasket shall be used to make panel vermin proof and comprising of following:-

Supply, install, testing and commissioning of LT Distribution Panel (CPRI type tested ) cubicle type IP-56, indoor type confirming to IS-61439 factory fabricated prewired made out of 2 mm thick CRCA sheet outer & 1.6 mm thick CRCA sheet inner of suitable size to accommodate all accessories/fittings compartmentalized in construction to accommodate the incoming/outgoing MCCB and TPN bus bars and outgoing feeders with CO2/inert gas/ clean agent local flooding system with cycinder located outside the panel. The TPN bus bars shall be insulted with colour coated heat shrinkable sleeve and shall be mounted on DMC support. The incoming as well as outgoing MCCBs shall have extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders. The extension links shall be supported on DMC support having provision for termination of incoming and outgoing cables. All extension links/ interconnections shall be colour coated sleeves. The cubicle shall have frame work at bottom of MS channel MC 100 fixed to the top of plateform. The plateform of LT panel shall be pedestal type of suitable width and 600 mm height above ground level and minimum 400 mm below the ground level constructed with bricks (sub class'B') work duly plastered in CM 1:3 and PCC copping (1:2:4) not less than 50 mm thick over brick pedestal with adequate opening for entry of cable complete as per manufacture recommendation and directed by the Engr-in-Charge. A detachable gland plate of thickness not less than 3 mm thick should be used at the bottom for entry of armoured cable of adequate size compression glands, the panel shall be painting with powder coated finish with RAL 7032 SIEMENS GRAY Structure after seven tank phosphate treatment front & back opening type and fixing 2 Nos danger notice plan with letter figures and conventional skull bones in signal red colour and fixed front & back door to LT Panel with voltage and danger indicated in Hindi and English with double door shutter and shall have louvers and air vent gasket for natural flow of air Neoprene adhesive type gasket shall be used to make panel vermin proof and comprising of following:-

Supply, install, testing and commissioning of LT Distribution Panel (CPRI type tested ) cubicle type IP-56, indoor type confirming to IS-61439 factory fabricated prewired made out of 2 mm thick CRCA sheet outer & 1.6 mm thick CRCA sheet inner of suitable size to accommodate all accessories/fittings compartmentalized in construction to accommodate the incoming/outgoing MCCB and TPN bus bars and outgoing feeders with CO2/inert gas/clean agent local flooding system with cycinder located outside the panel. The TPN bus bars shall be insulted with colour coated heat shrinkable sleeve and shall be mounted on DMC support. The incoming as well as outgoing MCCBs shall have extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders. The extension links shall be supported on DMC support having provision for termination of incoming and outgoing cables. All extension links/ interconnections shall be colour coated sleeves. The cubicle shall have frame work at bottom of MS channel MC 100 fixed to the top of plateform. The plateform of LT panel shall be pedestal type of suitable width and 600 mm height above ground level and minimum 400 mm below the ground level constructed with bricks (sub class'B') work duly plastered in CM 1:3 and PCC copping (1:2:4) not less than 50 mm thick over brick pedestal with adequate opening for entry of cable complete as per manufacture recommendation and directed by the Engr-in-charge.. A detachable gland plate of thickness not less than 3 mm thick should be used at the bottom for entry of armoured cable of adequate size compression glands, the panel shall be painting with powder coated finish with RAL 7032 SIEMENS GRAY Structure after seven tank phosphate treatment front & back opening type and fixing 2 Nos danger notice plan with letter figures and conventional skull bones in signal red colour and fixed front & back door to LT Panel with voltage and danger indicated in Hindi and English with double door shutter and shall have louvers and air vent gasket for natural flow of air Neoprene adhesive type gasket shall be used to make panel vermin proof and comprising of following:- Note:- (i) LT panel board should be Type Tested from CPRI (A copy of valid CPRI type test report to be enclosed while obtaining approval from GE). (ii) SLD diagrame for LT panel will be got approved from GE before placing the order and final diagram will be fixed on the front and rear door.

Supply & fix Aviation obstacle Light die-cast aluminium housing with Red polycarbonate dome for better illumation with integral driver, IP-65 protection of Capacity 10 Watt complete all connection with suitable PVC wire in conduit all as directed. Make : Surya/Bajaj/Havells.

Supply & installation hot dip galvanised octagonal poles 7 mt long, top dia 70 mm, bottom dia 130 mm having sheet thickness 3 mm, base plate 200 mm x 200 mm x 12 mm (LxBxT) including foundation bolt size 4 x 20 mm dia, 200 mm pitch circle dia, 600 mm bolt length, 100 mm projected bolt length, having door opening of sizes 90 x 500 mm above GL and having hot dip galvanized single arm plane arm bracket 1000 mm long for pole having top 70 mm dia, for mounting street light fitting fixed on the top with nut bolts washers including provision of cable 2.5 sqmm 3 core & cable connector for three phase supply and one no MCB SP of 0.5 A to 6 A complete alongwith necessary earth work, PCC, with iron work all as specified by the manufacture as approved by GE and as directed by Engineer in charge. Make Bajaj Model No BOP-7030 or eqvt make of Surya/ HPL.

DG SET

Supply, installation, commissioning and testing of eco-friendly Diesel Engine driven generating set silent type confirming to CPCB IV condition/norms, 58.5 KVA (47 KW) rating as per BS-5514, 04 Cylinder, inline, 4 stoke cycle, water cooled turbocharged, at 1500 RPM, 415 volts (AC 3 phase,4 wire system of supply) 50 Hz at 0.8 power factor directly coupled alternator & engine, water cooled, mounted on common base plate of rigid fabricated mild steel frame platform with floor mounted fuel tank of suitable capacity (minimum 12 hrs capacity of consumption) & including all excavation PCC foundation, anti-vibration pads/dampers including standard control panel other accessories as per manufacturer's design. The Gen set should be fitted with integrated acoustic enclosure manufactured by the OEM of the Generating set. The Generating Set and acoustic enclosure shall confirm to emission norms and noise level. The acoustic enclosure shall be type tested and certificate obtained for the type approved from approved agencies listed in Govt Notification. Specifications of DG set shall be as specified and comprising of the following:- Make of OEM :- (i) M/s KOEL Green (ii) M/s Sudhir power Ltd (iii) M/s Greaves power (A) ENGINE (Prime Mover): Diesel engine vertical type of adequate capacity for 58.5 KVA (47 KW) , 04 Cylinder, inline, 4 stoke cycle, water cooled turbocharged, at 1500 RPM under NTP conditions of BS : 5514, turbo charged water cooled, compression ratio 18.3:1, 12 volts 120 Ah electric battery start, complete with fly wheel and all standard fittings/ fixtures as per manufacturer instructions including suitable engine control panel/dash Board with electronic tachometer. Lubrication oil temperature & pressure gauges water temp gauge and frequency meter (digital type) including safety automatic shutdown in case of fault such as high water temperature low oil pressure, over speed etc. including self-starter, alternator, cogged, V belt, fuel tank with first fill of lub oil and coolant (as applicable) etc complete all as specified and directed. Make of Engine :- (i) Kirloskar (ii) Cummins (iii) Greaves power (B) ALTERNATOR: Alternator AC, 3 phase 415 volts 4 wire rated line current for output 58.5 KVA, PF 0.8 1500 RPM confirming to BS 5000 directly coupled with above engine. The Alternator shall be brushless type, screen protected, revolving field, self-exited, self-regulated through an AVR. The alternator has the following features:- (i) + 0.5% voltage regulation (max) in static conditions

(ii) IP-23 protection with insulation class H. (iii) Permissible overload of 10% for one hour in 12 hours of operation. (iv) Anti-vibration pads for mounting engine and alternator assembly on the base frame/ plate or as recommended/provided by the manufacturer. (C) Base frame made out of structural steel as per manufacturer's recommended design/ specifications. (D) ACCOUSTIC ENCLOSURE Provision of an integral type approved/certified acoustic enclosure. It shall be made of 16 SWG or manufacturer's standard norms out of CRCA sheet with powder coated finish on outside and provided with non-igniting fire retardant foam as acoustic material of suitable thickness and perforated sheet of stainless steel as per manufacturer design. The doors and glass window shall be as per manufacturer's design. The base frame shall be of ISMC.It shall also include the following:- (i) Silencer: Suitable exhaust Residential grade silencer to reduce the noise level. (ii) Internal wiring with PVC copper cable (ISI 694marked) FRLS in conduit and for light and fan point lamp fittings including lamp.

(iii) Fuel tank: Sub Base Fuel tank of 14 SWG MS sheet of capacity considered as per OEM duly powder coated. (iv) One No of 12V 120 Ah maintenance free batteries as recommended by manufacturer.(E) The standard digital control Panel suitable to accommodate inside acoustic enclosure all as specified. (F) Base rail : Base rail with integral fuel tank is provided. Make of Alternator : (i) Kirloskar Green (ii) Stamford (iii) Crompton Greaves (G) AMF Power Control Panel:- Supply fabricating, fixing, commissioning & testing Powder Coated AMF control panel suitable for 58.5 KVA DG Set manufactured with 3.00 mm thick CRCA sheet with angle iron frame of 50x50x6mm & shall be outdoor cubical type LT panel 415 Volts 3 Phase 4 wire system 50 Hz, floor mounted consisting of following accessories:- (i) Master controller of suitable size -01 No (ii) MCCB four pole of suitable size - 03 Nos (iii) Contactor and Relays of Suitable Capacity - 02 Nos (iv) Digital Volt meter of suitable size - 02 Nos (v) Digital Ampere meter of suitable size - 02 Nos (vi) Digital Frequency meter- 01 aux supply 230 volts AC (vii) Push Button start,stop reset-01 No set, Three Phase Indicating lamps (viii) MF digital meter switch for KW, KVA & PF, KWH meter, timer, siren etc.

Design, Supply, installation, testing and commissionning of 08 passenger lift (544 Kg) Gearless, machine room less (MRL) to serve G+4 upper floors with AC variable voltage & variable frequency (VVVF) drive as per OEM recommendation drive complete with all standard accessories, simplex full collective controlled operation, two-panel centre opening plain panel stainless steel doors with power drive, Automatic Rescue device system and 2 way intercom system with items all as specified herein under:- (a) Type and capacity of Lift : Traction type, 08 Passengers Lift (544 kgs) (b) Speed (MPS) : 1.0 MPS

(c) Type of Drive : AC variable voltage & variable frequency (VVVF) drive or Variable frequency (VF) drive as per OEM recommendation (d) Machine room Less type (e) Travel/Rise : 14.8 Mtrs (Approx) or as per actual site measurement (f) Serving : Ground floor to 4th Floor (Floor designations will be 0,1,2,3,4) (g) Stops & Opening : 5 Stops & 5 openings, Single entrance car. (h) Controller Type : ACD3-MRL (j) Drive : VF regenerative (closed loop) (k) Power Supply : 415 Volts, 3 Phase AC, 50 Hz (l) Elevator Grouping : Full collective control (m) Car Group : One Car (Simplex) (n) Machine : PM Gearless (located in shaft on Top of guide rails) (o) Car Finish : Rear Mid Panels - Stainless Steel,Rear corner Panels - Stainless Steel,Side Mid Panels-Stainless Steel,Side corner Panels - Stainless Steel,Front Panels - Stainless Steel (p) Ceiling & lighting : Integrated roof RL 20 stainless steel ring lighting LED. (q) False ceiling Finish : Stainless Steel Hairline Finish . (r) Ventilation : Cross flow fan (s) Hand Rails : Round bend Handrail silver brushed Stainless Steel (ST4) at rear wall. (t) Car Flooring : Aluminium chequered plate min 5 mm thick (u) Car doors : Centre opening auto power door in AISI-441 stainless steel hairline finish. the direction of door opening should be as per space availability at site. (v) Landing Signalization : Stainless steel 7 segment display flush mounted silver brushed StSt square , surface mounted with braille KDS90. (w) Well dimension : 2500 mm width and 2955 mm depth. (x) Car Dimensions : 1200 mm wide, 1200 mm deep, 2200 mm high.

(y) Pit height : Min 1600 mm. (z) Headroom height : 4400 mm. (aa) Car Operating Panel : Full height Stainless steel Face plate silver brushed StSt segmented LCD display square surface mounted buttons KDS90 (ab) Door Dimensions : 800 mm wide , 2000 mm internal height. (ac) Car Position indicator : Monochrome LCD- Blue back ground & white font Dot matrix (LED) Scroliing Display (ad) Hall fixtures face Plate : Stainless Steel (ae) Hall Button arrangement : LCD Monochrome type (af) Door safety : Full height infrared curtain sensor . (ag) Two hour fire rating for landing at all floors (ah) Required trailing cable, Suspension traction media i.e. belt, steel rope as per OEM recommendation etc. (aj) Standard Features : Correction drive to next level, Emergency Alarm @ Main floor, Car call backwards, overload funtion, constant indication/buzzer, bypass load fuction, auto cut off fan and light, Automatic and Manual Rescue Operation, centralized hosting for lesser vibration and smooth travel, pit ladder, micro movement LED based buttons, L.W.D. (Load Weighing Device) Direction & position indicator in car & landing, advanced car position indication, automatic brake test function every 11 hours, every run brake supervision, phase reversal fuctioning, signal fixtures, +10 % to - 10% voltage fluctuation withstanding capacity, door close button, door open button, car emergency light, Fireman drive, curtain of light 169 beams, accurate relevelling, automatic closed door, car door lock, Emergency firemen's Serivce, Door time protection, Emergency Alarm Button.

ADDL FEATURES : (a) Direction and position indicator in COP & LOP . (b) Battery operated Emergency Alarm & light and connected equipment for recharging. (c) Two way intercom with hand free operation for car. (d) Attendant key switch for COP (e) Fireman switch at main lobby. (f) Adjustable guide shoes. (g) Floor announcenment system. (h) Accurate levelling, automatic closed door. (j) Load weighing device with overload warning. (k) Automatic phase sequence corrector & single phasing protection, under voltage and over voltage protection (l) Manual rescue Operation . (m) Over speed governer. (n) Automatic (Emergency) rescue device/automatic landing device with audio announcer to be operated with maintenance free batteries for safe landing as specified. (o) Other Equipments, accessories, safety devices reqd as per recommendation of OEM. (p) Auto On/Off light/fan mode (q) 2 hours Fire rated for landing door. (r) Nudging service.

Design, Supply, installation, testing and commissionning of 13 passenger lift (884 Kg) Gearless, machine room less (MRL) to serve G+4 upper floors with AC variable voltage & variable frequency (VVVF) drive as per OEM recommendation drive complete with all standard accessories, simplex full collective controlled operation, two-panel centre opening plain panel stainless steel doors with power drive, Automatic Rescue device system and 2 way intercom system with items all as specified herein under:- (a) Type and capacity of Lift : Traction type, 13 Passengers Lift (884 kgs) (b) Speed (MPS) : 1.0 MPS (c) Type of Drive : AC variable voltage & variable frequency (VVVF) drive or Variable frequency (VF) drive as per OEM recommendation (d) Machine room Less type (e) Travel/Rise : 14.8 Mtrs (Approx) or as per actual site measurement (f) Serving : Ground floor to 4th Floor (Floor designations will be 0,1,2,3,4) (g) Stops & Opening : 5 Stops & 5 openings, Single entrance car. (h) Controller Type : ACD3-MRL (j) Drive : VF regenerative (closed loop) (k) Power Supply : 415 Volts, 3 Phase AC,50 HZ. (l) Elevator Grouping : Full collective control (m) Car Group : One Car (Simplex) (n) Machine : PM Gearless (located in shaft on Top of guide rails) (o) Car Finish : Rear Mid Panels - Stainless Steel, Rear corner Panels - Stainless Steel, Side Mid Panels-Stainless Steel, Side corner Panels - Stainless Steel, Front Panels - Stainless Steel (p) Ceiling & lighting : Integrated roof RL 20 stainless steel ring lighting LED. (q) False ceiling Finish : Stainless Steel Hairline Finish . (r) Ventilation : Cross flow fan (s) Hand Rails : Round bend Handrail silver brushed Stainless Steel (ST4) at rear wall. (t) Car Flooring : Aluminium chequered plate min 5 mm thick (u) Car doors : Centre opening auto power door in AISI-441 stainless steel hairline finish. The direction of door opening should be as per space availability at site.

(v) Landing Signalization : Stainless steel 7 segment display flush mounted silver brushed StSt square , surface mounted with braille KDS90. (w) Well dimension : 2500 mm width and 2955 mm depth. (x) Car Dimensions : 1350 mm wide, 1600 mm deep, 2200 mm high. (y) Pit height : Min 1600 mm. (z) Headroom height : 4400 mm. (aa) Car Operating Panel : Full height Stainless steel Face plate silver brushed StSt segmented LCD display square surface mounted buttons KDS90 (ab Door Dimensions : 800 mm wide, 2000 mm internal height. (ac) Car Position indicator : Monochrome LCD- Blue back ground & white font Dot matrix (LED) Scrolling Display (ad) Hall fixtures face Plate : Stainless Steel (ae) Hall Button arrangement : LCD Monochrome type (af) Door safety : Full height infrared curtain sensor. (ag) Two hour fire rating for landing at all floors (ah) Required trailing cable, Suspension traction media i.e. belt, steel rope as per OEM recommendation etc. Standard Features : Correction drive to next level, Emergency Alarm @ Main floor, Car call backwards, overload funtion, constant indication/buzzer, bypass load fuction, auto cut off fan and light, Automatic and Manual Rescue Operation, centralized hosting for lesser vibration and smooth travel, pit ladder, micro movement LED based buttons, L.W.D (Load Weighing Device) Direction & position indicator in car & landing, advanced car position indication, automatic brake test function every 11 hours, every run brake supervision, phase reversal fuctioning, signal fixtures, +10 % to - 10% voltage fluctuation withstanding capacity, door close button, door open button, car emergency light, fireman drive, curtain of light 169 beams, accurate relevelling, automatic closed door, car door lock, Emergency firemen's Serivce, Door time protection, Emergency Alarm Button.

ADDL FEATURES : (a) Direction and position indicator in COP & LOP. (b) Battery operated Emergency Alarm & light and connected equipment for recharging. (c) Two way intercom with hand free operation for car. (d) Attendant key switch for COP. (e) Fireman switch at main lobby. (f) Adjustable guide shoes. (g) Floor announcenment system. (h) Accurate levelling, automatic closed door. (j) Load weighing device with overload warning. (k) Automatic phase sequence corrector & single phasing protection, under voltage and over voltage protection. (l) Manual rescue Operation. (m) Over speed governer. (n) Automatic (Emergency) rescue device/automatic landing device with audio announcer to be operated with maintenance free batteries for safe landing as specified. (o) Other Equipments, accessories, safety devices reqd as per recommendation of OEM. (p) Auto On/Off light/fan mode. (q) Nudging service. (r) 2 hours Fire rated for landing door.

FIRE FIGHTING, FIRE ALARM & DETECTION SYSTEM WORK

Supply, fixing, testing and commissioning of wall mounting swinging type First aid fire hose reel with drum, hanging bracket, 30 mtr long and 20mm dia high pressure hose reel as per IS 444 with gunmetal shut off nozzle having 5mm dia orifice.The hose reel shall be conforming to IS 884-1985.Rate shall including for 25 mm dia MS pipe connection from riser to hose reel sockets, nipples, elbows and ball valve (25mm dia). Drum shall be fixed on adjoining wall through anchor fasteners/cement concrete book or MS stand as per site requirement and the rate for fixing/hanging items in the rates quoted(for internal hydrant and one each an either side of stage) complete all as specified and directed.

Supply and fix Dual plates CI wafer type check valve, 100 mm bore tested to pressure of 15Kg/ Sqcm complete set all as specified and directed.

Supply, installation, testing and commissioning of Electric Terrace fire control panel metal clad cubical type suitable for 415 V AC three phase 4 wire 50Hz supply system. The panel should be suitable for automatic operation for the fire pump as per the specified parameter. The panel shall be completely compartmentalised and complete with relays, contractors, starters, Aluminium bus bar, designation labels as per requirement, Continuous earth bar, panel separators, protective screens, cable clamping supports system, panel lamps, top/bottom cable gland plate for incoming and outgoing cable entries complete all as specified and directed.

Supply and fix copper cable 10 Sqmm x 4 Core Electric power cable for connections with Pump and Panel in suitabe size of PVC conduit complete all as specified and directed.

Supplying, Installation, Testing and Commissioning of flexible connection with flange end both side , 100 mm dia complete as required at site as directed.

Supply, Installation, Testing and commissioning of intelligent microprocessor based analog, addressable Fire Alarm control Panel complying with BS EN 54 ,single Loop Panel with Zonal indication, having fault fire, AC fail, sounder fail, power fault indication etc addressable with LCD display of Cap from 99 detectors and 99 modules upto 200 detectors and modules including 2 X 12 V/ 12 Ah battery backup system for continuous opertaion all as specified and directed.

Supply, installation, testing and commissioning Network Repeater Panel with 6 inch or 640-characters; The LCD shall Display all events/detectors, devices status of complete systems in the networked, The NRP shall be equipped with QWERTY Keypad. Mounting options include an annunciator box, and blank modules are required for mounting. Make:- Honywell, JCI, Bosch, Edward.

Supply, installation,Testing and commissioning of addressable electronic Fire alarm Sounder cum strobe complete all as specified and directed.

Supply, installation, testing and commissioning of detectors copmlying with and type certified to EN-45 addressable type multisensor detector with heat and smoke combination photoelectric/optical with base and self built intelligence as per IS: 11360 copmlete all as specified and directed.

Supply, installation, Testing and commissioning of Intelligent addressable conventional resettble, break glass type with alarm LED Complete, manual call point with built in fault isolation for installation inside buildings complete with and including base mounting box, cable glands and installation hardwares all as specified and directed.

Supply and fix Response indicator unit complete.

Supply, installing, testing and commissioning of 2C x 1.5 sq. mm, PVC insulated FRLS Armoured copper cable for SLC Loop & Power Supply, confirming to IS standards and specifications in ERW steel concealed conduit Complete as required as per technical specification.

Supply, installing, testing and commissioning of short circuit isolators complete all as specified and directed.

Supply, installing, testing and commissioning of Addressable control module complete all as specified and directed.

Supply, installing, testing and commissioning of 6 Watt speaker with complete fittings and accessories all as specified and directed. Make Honeywell, Bosch, Edward.

Supply, installing, testing and commissioning of 250 Watt Amplifier with complete fittings and accessories all as specified and directed.

Supply, fixing, testing and commissioning of MECHANICAL FOAM TYPE fire extinguishers, 9 Ltr capacity conforming to IS:15683, with wall bracket handle fitted with high pressure flexible discharge hose with discharge throw of 2 - 5 Mtrs., with ISI certitifcation mark complete all as specified and directed.

Supply, fixing, testing and commissioning of carbon-di-oxide light weight squeeze grip ISI marked IS:15683 of cap 4.5 Kgs capacity fire extinguisher, IS certification mark complete all as specified and directed.

Supply, fixing ,testing and commissioning of Dry Chemical Powder Fire Extinguisher (ABC POWDER) 6 Kgs capacity Stored Pressure type, ISI Marked, IS:15683 complete all as specified and directed.

Supply, installation, testing and commissioning of Fire Extinguisher Water stored pressure type 9.0 Ltr capacity as per IS: 15683 complete all as specified and directed.

Supply & fixing of Laser Etched LED light double sided Exit Signage on Ceiling/Wall Mounted with Logo & Exit arrow on transparent Acrylic sheet of 303mm x 140mm with powder coated top M.S Box with 4 hours backup complete with rechargeble maintenance free 24 Volts, sealed lead acid batteries, in suitable MS box complete all as specified and directed.

ARBIRICULTURE

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil, seprate the roots/grass and good earth by sieving with suitable seive size, stacking of good earth & mixed with suitable manure of ratio 5:1 including supply of manure, screened through sieve of 1.5 designation 4.75 mm and spreading the mixture of good earth & manure, applying suitable pesticides, watering to a depth of 15cms, including removal of roots/grass out of site Material and laying of 'DOOB GRASS'/Carpet Grass planting complete as aprroved and directed by the Garrison Engineer.

Excavation in post hole of size not less than 60 cm x 60 cm x 60 cm deep or according to the plant size & getting out the existing earth and planting the trees straight inside the pit and filling up the pit with and including the approved earth along with and manure (composit) in the proportion (3:1) and including Supply and Planting "Golden Dorenta Hedge" with proportionate girth, remove and spread the surplus excavated soil complete all as specified and as directed by the Engineer in Charge.

Excavation in post hole of size not less than 60 cm x 60 cm x 60 cm deep or according to the plant size & getting out the existing earth and planting the trees straight inside the pit and filling up the pit with and including the approved earth along with and manure (composit) in the proportion (3:1) and including Supply and Planting "Neem plant" with proportionate girth, remove and spread the surplus excavated soil complete all as specified and as directed by the Engineer in Charge.

Excavation in post hole of size not less than 60 cm x 60 cm x 60 cm deep or according to the plant size & getting out the existing earth and planting the trees straight inside the pit and filling up the pit with and including the approved earth along with and manure (composit) in the proportion (3:1) and including Supply and Planting "Ambla Tree" with proportionate girth, remove and spread the surplus excavated soil complete all as specified and as directed by the Engineer in Charge.

Excavation in post hole of size not less than 60 cm x 60 cm x 60 cm deep or according to the plant size & getting out the existing earth and planting the trees straight inside the pit and filling up the pit with and including the approved earth along with and manure (composit) in the proportion (3:1) and including Supply and Planting "Ashoka Tree/Mango" with proportionate girth, remove and spread the surplus excavated soil complete all as specified and as directed by the Engineer in Charge.

Excavation in post hole of size not less than 60 cm x 60 cm x 60 cm deep or according to the plant size & getting out the existing earth and planting the trees straight inside the pit and filling up the pit with and including the approved red earth along with and manure (composit) in the proportion (3:1) and including Supply and Planting "Ficus" with proportionate girth, remove and spread the surplus excavated soil complete all as specified and as directed by the Engineer in Charge.

Excavation in post hole of size not less than 60 cm x 60 cm x 60 cm deep or according to the plant size & getting out the existing earth and planting the trees straight inside the pit and filling up the pit with and including the approved red earth along with and manure (composit) in the proportion (3:1) and including Supply and Planting "PLUMERIA" with proportionate girth, remove and spread the surplus excavated soil complete all as specified and as directed by the Engineer in Charge.

Excavation in post hole of size not less than 60 cm x 60 cm x 60 cm deep or according to the plant size & getting out the existing earth and planting the trees straight inside the pit and filling up the pit with and including the approved red earth along with and manure (composit) in the proportion (3:1) and including Supply and Planting "Gulmohar Tree" with proportionate girth, remove and spread the surplus excavated soil complete all as specified and as directed by the Engineer in Charge.

Excavation in post hole of size not less than 60 cm x 60 cm x 60 cm deep or according to the plant size & getting out the existing earth and planting the trees straight inside the pit and filling up the pit with and including the approved red earth along with and manure (composit) in the proportion (3:1) and including Supply and Planting "Amalthas" with proportionate girth, remove and spread the surplus excavated soil complete all as specified and as directed by the Engineer in Charge.

Provision of tree guard around trees height 1.5m and size 60 x 60 cm with angle iron 40 x 40 x 5 mm and 40 x 3 mm MS flat to support angle, 3mm hard wire mesh(50x50mm opening) complete all as specified by Engr-in-charge.

DRIP IRIGATION

Sprinkler system componets for 50mm dia pipe with followings:- (a) Supply and fixing HDPE pipes with quick action coupler (2.5kg/cm2) of 6metre long (25 Nos) (b) Supply and fixing sprinkler coupler with foot baton assembly (05 Nos) (c) Supply and fixing sprinkler nozzels (1.7 to 2.8kg/cm2) (05 Nos) (d) Supply and fixing riser pipe 20mm dia x 75mm long (05 Nos) (e) Supply and fixing connection nipple (01 No) (f) Supply and fixing bend with coupler 90°(01 No) (g) Supply and fixing Tee with coupler (01 No) (h) Supply and fixing End plug (02 No)

Supply and fixing drip kit (16mm dia) complete all as specified and directed.

Supply and fixing drip tape-250PP45cm/9inch/16mm /50 metre complete all as specified and directed.

Supply and fixing CI water meter threaded type of size 40mm dia class-A confirming to IS-779/94 complete all as specified and directed.

Supply and fixing CI water meter threaded type of size 80mm dia class-A confirming to IS-779/94 complete all as specified and directed.

ROOFTOP SOLAR SYSTEM

Design, Supply , installation, testing , commissioning of 30 KWp on Grid connected roof top Solar PV generating plant covering following scope of work for commissioning of 30 KWp solar generation plant and other allied works complete all as specified . (A) MODULES Solar Photovoltaic modules made of Mono Bifacial DCR multicrystalline silicon, minimum 144 Nos of PV cells per module, of rating 550 Wp, confirm to latest edition of the IEC 61215/BIS 14285 (for Modules) & IEC 61730 (Part I&II) for construction & safety including RF identification tag for each module, duly vetted from NABL Acredited Testing Laboratries & MNRE Approved test centre, including rooftop mounted structure of hotdip galvanised frame complete all as specified - 55 Nos . Note:- (i) The total solar PV minimum array capacity should not be less than 30 KWp and should comprise of indigenous solar multi crystalline modules of 550 Wp with higest efficiency available in market. Standard solar PV module are to be installed on the rooftop.The bidder must visit the site so as to ascertain the exact location where the PV modules are to be installed. (ii) The PV module shall perform satisfactorily in humidity upto 100 % with temperature beteen -5 degree to +55 Degree centigrade. Since the modules would be in a high voltage circuit, the high voltage insulation test shall be carried out on each module and a test certificate to that effect needs to be provided. The predicted electrical degradation at the warranty period of 25 years shall not be less than 20 percent of the full rated original output with output wattage of PV modules should not be less than 90% at the end of 10 years and 80% at the end of 25 years. During the perod of warranty the contractor shall remain liable to replace any defective parts that become defective in the plant, under the conditions provided in the contract and arising solely from faulty materials or workmanship. Efficiency of each module should not be less than 95% including interconnection. Make : WAREE, OSWAL, TATA, HAVELLS. (iii) Manufacturers/suppliers should confirm weather they are supplying PV modules using a RF identification tag (RFID) which must contain the following information:-

(a) Name of the manufacturer of PV module. (b) Name of manufacturer of solar cells. (c) Month and year of the manufacturer ( separately for solar cells and module) . (d) Country of origin ( separately for solar cells and module) . (e) I-V curve for the module. (f) Peak wattage, Im,Vm, and FF for the module. (g) Unique serial No and Module No of the module( made in India only). (h) Date and year of obtaining IEC PV module qualification certificate. (j) Name of the test lab issuing IEC certifiacte. (k) Other relevant information on traceability of solar cells and module. Solar cells and modules shall be "Made in India". (B) INVERTER : Supply ,Installation,testing and commissioning of data logging and string monitoring grid tied Inverter/PCU suitable for RTS plant with single card microprocessor/DSP based design ,switching device IGBT/MOSFET and inbuilt RMPPT Charger of capacity 30 KWp, three phase,415 V, 50 HZ ,IP-65 protection with peak efficiancy upto 99%, inbuilt protection devices like ground fault monotoring, grid monotoring, anti islanding, DC reverse polarity, AC and DC short circuit and over current, AC and DC over and under voltage and temperature and inbuilt isolation transformer, inbuilt metering system and noiseless in operation wide input voltage range from 200 volt upto 800 volt suitable for indoor and outdoor application, onscreen data display.

Note:- PCUs shall be warranted for minimum period provided by the manufacture but not less than 5 years PCUs shall be warranted for any manufacturing defect or bad workmanship for a minimum period of 05 years from date of completion of work. The contractor shall submit neccesary warranty certificate for 05 Years to GE. (C) MODULE MOUNTING STRUCTURE : Supply and fixing mounting structure for PV Module, made out of hot dip galvanized pipe, structural steel, flate angle iron as required including cutting, welding, grouting on roof top, making holes all fabrication as required including PCC work of 1:2:4 ratio. The technical specifications for mounting structures are as under: (i) The mounting structure should withstand wind load as per relevant IS code/NBC code. (ii) The mounting steel structure shall be as per relevant IS 2061-1992 and galvanizing as per IS 4759. (iii) The material shall be corrosion resistant and electrolyticaly compatible with material used in module frame. (iv) The fastners should be of stainless steel and should allow easy replacement of any module. (v) The frame and leg assemblies of the modules mounting structure is of galvanised Iron of suitable sections to meet the design criteria. All hardware considered for fastening module with this structure are of very good quality of stainless steel (SS304).The module mounting structure is designed in such a way that it will occupy minimum space without sacrificing the output from SPV panels at the same time it will withstand severe wind gust upto a maximun 160 kmph. (vi) The mechanical structures, electrical works, and SPV power system must be warranted for a miniimum of 5 years. (D) ACDB/DCDB Panal : Supply, installation, testing, commissioning of Factory made ACDB/ DCDB Panel suiatabe for outdoor system for 30 KWp on Grid connected roof top Solar PV generating plant coplete as per manufacturer's design-02 Nos as recommended by OEM. Make ABB/Havells/L&T.

(K) MODULE CLEANING ARRANGEMENT : S&F of module cleaning arrangement includes pipeline, jet spray nozzels, electric operated pupm of suitable size with electric connection and starter etc. water storage tanks of sufficient capacity, pipes valves and connecting to existing water pipe line etc copmlete as per recommended by OEM. (L) AMC: AMC for comprehensive maintenance of 30 KWp Solar system during defect liability period for 12 month from the actual date of completion of Phase-I including operation of PV modules, junction Box, inverter, metering system including washing of PV module per week by providing/deploying all required supervisory/technical staff as required number of helper etc. Note:- All components of RTS plants will be compatible to each other to produce desired output.

AIR QUALITY DISPLAY SYSTEM

Supply & fixing of indoor air quality monitor display 3.5" TFT for parameters PM 2.5, PM10, Carbon Dioxide, temp Humidity, Total volatile compounds with + WiFi support including charger of input AC 110-240 V, 0.3A/50-60 Hz/2 Amp, Charger output of 5V-2A (Max) connected to the device via micro USB socket, power consumption of 10 Watt, internal battery 2x2900 mAH/3.7 V Lithiumion rechargeable battery, battery backup 6 to 8 hours, back dimension (width - 117mm, height -120 mm, protrusion - 2mm total height 122mm), front dimension (width - 117mm, height -117mm, protrusion - 2mm, total height -119mm), weight 370 gm, material made ABS, IP Rating 51, opearting temp 0 to 60 deg C and operating humidity 0 to 95%, complete all as directed.

SMART METER

Supply, installation, testing & commissioning of 3-Φ, 4 Wire, AC Static Direct connected, Smart Pre-paid Energy Meters, ISI marked of different makes as per BIS-16444, with communication technology including GPRS/RF/Hybrid (RF Mesh Network+GPRS)/any other advanced technology as per CEA/TRAI regulations) with current range 10-60A Amp, 415 V, accuracy class 1.0 UC1 category and above along with in-built load control switch, containing provision for TOD & RTC, capable to define multiple tariff slabs complete all as specified and directed.( For Lifts and Common Area) Meter should support the following data : (i) 15 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, daily and monthly billing survey for Cumulative Energy and Max Demand (ii) Meter should have connect/disconnect functionality operable for MDM/billing software and prepaid features would be operable for MDM/Billing end as per IS: 15959 Part-2. (iii) Meter should support communication protocol through RF/5G/4G/NB IOT with the existing software in stn (iv) The meter should support open communication protocol DLMS with the existing software. Make: Anchor/L&T/HPL/Secure. Note:- The smart meter would be compatiable with existing software/DCU in Stn.

Supply, installation, testing & commissioning of 1-Φ, 2 Wire, AC Static Direct connected, Smart Pre-paid Energy Meters, ISI marked of different makes as per BIS-16444, with communication technology including GPRS/RF/Hybrid (RF Mesh Network+GPRS)/any other advanced technology as per CEA/TRAI regulations) with current range 10-60A Amp, 240 V, accuracy class 1.0 UC1 category and above along with in-built load control switch, containing provision for TOD & RTC, capable to define multiple tariff slabs complete all as specified and directed. (For Street LIghts) Meter should support the following data:- (i) 15 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, daily and monthly billing survey for Cumulative Energy and Max Demand. (ii) Meter should have connect/disconnect functionality operable for MDM/billing software and prepaid features would be operable for MDM/Billing end as per IS: 15959 Part-2. (iii) Meter should support communication protocol through RF/5G/4G/NB IOT with the existing software in stn. (iv) The meter should support open communication protocol DLMS with the existing software. Make: Anchor/L&T/HPL/Secure. Note:- The smart meter would be compatiable with existing software/DCU in Stn.

NAND LAL PURI AND SONS PRIVATE LIMITED (BID ID -3438528)