WELCOME MAINTENANCE AND PERIODICAL SERVICES IN CERTAIN BLDG AT ARMY AREA COIMBATORE UNDER GE WELLINGTON

Amount

Hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed.

Plain sheet glass 4mm thick, ordinary quality and glazing with oil putty / wooden beading in squares not exceeding 0.50 Sqm in each pane all as specified and directed.

Figured glass, pin headed type, 3mm thick, and glazing with oil putty / wooden beading in squares not exceeding 0.50 Sqm in each pane all as specified and directed.

Stainless steel wire cloth fixed in repairs, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples in steel / wooden joinery etc all as specified and directed.

Health faucet (Jet Spray ) Brass CP, 15mm dia with flexible pipe 1m long and fixing nut etc complete all as specified and directed.

PVC valveless syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10 litre capacity, fixed in repairs all as specified and directed.

Sinks with drainage board fixed in repairs made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

Brass chromium plated shower rose 100mm to 125 mm size, swivel type with arm, including fixing to 15mm dia pipe or union fixed in repairs all as specified and directed.

Vitreous china wash basin, white, flat back, size 550mm x 400mm including cutting for and pinning in ends of brackets but exclusicve of fixing of and waste pipe complete fixed in repairs all as specified and directed.

Vitreous china wash basin, white, flat back, size 450mm x 300mm including cutting for and pinning in ends of brackets but exclusicve of fixing of and waste pipe complete fixed in repairs all as specified and directed.

Vitreous china wash basin, white, flat back, size 400mm x 400mm including cutting for and pinning in ends of brackets but exclusicve of fixing of and waste pipe complete fixed in repairs all as specified and directed.

Vitreous China, squatting pan, ”ORISSA PATTERN” size 580x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) P trap / S trap etc complete, fixed in repairs all as specified and directed.

Vitreous China, wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) complete fixed in repairs all as specified and directed.

Dismantling and removing water tanks of capacity exceeding 250 ltrs and not exceeding 500 ltrs all as specified and directed.

Dismantling and removing water tanks of capacity exceeding 500 ltrs and not exceeding 1000 ltrs all as specified and directed.

Rotational moulded polyethylene water storage tanks, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position, 500 ltrs capacity all as specified and directed.

Rotational moulded polyethylene water storage tank, ISI marked (cylindrical vertical with closed top) of capacity 1000 ltrs hoisted and fixed in position all as specified and directed.

Bib taps of cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore, fixed in repairs all as specified and directed.

Bib tap15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms), fixed in repairs all as specified and directed.

Pillar taps, fancy type, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe all as specified and directed.

Pillar taps 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms), fixed in repairs all as specified and directed.

Stop / angle valves, 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed.

20mm dia Gunmetal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs all as specified and directed.

32/40mm dia expandable type PTMT waste pipe for Wash hand basin/kitchen sink complete fixed in repairs all as specified and diercted.

25mm dia Gunmetal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm all as specified and directed.

Stainless steel plate rack of approved make, size not less than 36 x 36 inches and weight not less than 7.00 kgs each all as specified and directed.

Stainless steel curtain rod 20mm dia 1.25mm thick fixed in repairs all as specified and directed.

Curtain rod brackets 20mm dia fancy type fixed in repairs complete all as specified and directed.

Tubular towel rail 20mm dia, brass chromium plated fancy type, all as specified and directed.

Ready made PVC / bakelite Toilet cabinet with openable shutter and mirror on front face (Size not less than 330mm x 430mm) all as specified and directed. Make Prayag or equivalent as approved by GE.

15mm dia chromium plated cast copper alloy fancy type, two in one combination of bib tap and angle valve fixed in repairs all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing including refixing old steel tubing and connection in new or old position (walls, ceiling, floors etc) all as specified and directed.

Taking up or down steel tubing and connections, bore of pipe upto 15 mm, all as specified and directed.

15mm bore unplasticised PVC pipes including fittings of pressure rating 10 Kgf/cm² laid and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Applying one coat of oil bound distemper on old decorated plastered surfaces of walls including preparation of surfaces and filling holes and undulations with wall putty all as specified and directed.

Brooming down plastered or unplastered old decorated surfaces including preparation and applying one coat of white wash on walls including cornices pillasters etc. all as specified and directed.

All as per item No 38 hereinbefore but on ceiling surfaces all as specified and as directed.

All as per item No 38 hereinbefore but colour washing all as specified and as directed.

Preparation of old painted wooden surfaces exceeding 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Preparation of old painted steel surfaces exceeding 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Washing rubbing down and stopping of previously painted surfaces and applying one coat of cement base paint on walls all as specified and directed.

Preparation of old wall surfaces and applying one coat of Asian Paint Apex Ultima on external walls complete all as specified and as directed.

Preparation of old wall surfaces and applying one coat of Asian Paint Royal Shyne on internal walls complete all as specified and as directed.

Applying SEAL 'N' FLEX (high grade polyurethane based sealant) on cracked joint of size 10mm x 5mm including necessary surface preparation such as cleaning, wire brushing, filling the joint with backer rod, using masking tapes over the sides of the joint, filling SEAL 'N' FLEX, tooling etc complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc ,complete all as specified and as directed.

Rendering 15mm thick in cement mortar 1:6 on concrete or brick surfaces of wall, finished even and smooth without using extra cement all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on concrete or brick surfaces of wall, finished even and smooth without using extra cement all as specified and directed.

Rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling, finished even and smooth without using extra cement all as specified and directed.

Preparation of newly plastered surface and applying two coats of Asian paint Apex ultima over two coats of wall care putty on external walls complete all as specified and directed.

Preparation of newly plastered surface and applying two coats of Asian paint Royal Shyne over two coats of wall care putty on internal walls complete all as specified and directed.

Applying two coats of white wash in ceiling on newly plastered surfaces all as specified and directed.

Washing rubbing down and stopping of previously distempered surfaces of wall and applying one coat of oil bound distemper all as specified and directed.

Complete removal of existing treatment on walls and applying two coats of oil bound distemper on old plastered surface all as specified and directed.

Applying one coat of wall care putty to cover old uneven plastered surfaces in wall / ceiling up to 1mm to cover undulations and finished even and smooth using emery paper all as specified and directed.

Writing letters or figures .(Block, Roman, Italic or indian) not exceeding 30cm height all as specified and directed.

Supply and fix in repairs slim concealed flushing cistern all as specified and directed. Make: Jaquar or equivalent

SEMBA ELECTRICALS

SRI SHIVASHAKTHI CONSTRUCTION