Various electric work against Municipal Corporation for quality power supply in Aligarh City on Semi Turn-key Basis under the area EUDD-4, Aligarh

Amount

Safe carriage of following material from Store Centre, Sarsol, Aligarh to the respective site of work including the work of its loading & unloading at the repective ends and its erection as per direction of supervising engineer, including the cost of arrangement of labour, T&P carrier etc. required for proper completion of work as per RESSPO Norms:-

ST Pole 11 Mtrs.

ST Pole 13 Mtrs.

ST Pole 9 Mtrs.

Earthing Complete

Stay complete(GI Stay Rod 16x1800mm, 5 Kgs. Stay wire 7/8, Stay clamps, Insulator, Bolts, Nuts & Washers)

11 KV XLPE Cable 3x70sq.mm.

11 KV XLPE Cable 3x120sq.mm.

11 KV XLPE Cable 3x185sq.mm.

11 KV XLPE Cable 3x300 sq.mm.

33 KV XLPE Cable 3x300 sq.mm.

ACSR Dog Conductor

ACSR Weasel Conductor

Distribution Box with Clamp

AB Cable 3x120+1x95+x16 sq.mm.

AB Cable 3x95 sq.mm.

Distribution Transformer 63 KVA

Distribution Transformer 100 KVA

Distribution Transformer 250 KVA

Distribution Transformer 400 KVA

11 KV D.O. Fuse Set

11 KV TPMO

33 KV Pin Insulator

33 KV Pin with Nut

11 KV Pin Insulator with Pin

11KV Disc Insulator

11KV Disc fitting

11 KV V Type Cross Arm

GI Wire 6 SWG

GI Wire 8 SWG

11 KV cable Jointing Kit 3x70sq.mm. (Outdoor)

11 KV cable Jointing Kit 3x120sq.mm. (Outdoor)

11 KV cable Jointing Kit 3x185sq.mm. (Outdoor)

11 KV cable Jointing Kit 3x300 sq.mm. (Outdoor)

33 KV cable Jointing Kit 3x300sq.mm. (Outdoor)

33 KV cable Jointing Kit 3x300sq.mm. (Straight through)

TROLLY FOR 400 KVA T/F

Stone Pad

Suspension Clamp with I Hook

Deadend Clamp with I Hook

Top Channel size 125x65x2240 mm.

Dropper Channel size 100x50x2028 mm.

Tee off Chennal

Clamp with nut bolt

Base Angle size 75x75x6x2028 mm.

Danger Board with Clamp

Nut Bolt & Washer

Number Plate with clamp

HDPE, PN-6 Pipe (240 mm dia) with clamp etc.

400 AMP MCCB FOR 400 KVA T/F

250 AMP MCCB FOR 2500 KVA T/F

Neutral & body earthing of Distribution Transformer by digging of pit upto water level depth (approx. 125 feet) and then inserting 1-¼” dia GI pipe of ‘A’ grade, conforming to the requirement of IS specification and then connecting the top of the inserted pipe and transformer body through GI strip of size 40x6 mm with the help of nut and bolt or through gas welding, as per direction of supervising engineer. It includes the cost of all material labour, T&P, carrier etc. required for proper completion of work. The aforesaid work shall be carried out as per RESSPO norms.

Construction of plinth at various 11/0.4 KV Sub-station suitable for distribution transformer having size 5’x 5’ x 5’ out which 2’ below the ground. Work will include digging of foundation 2’ deep & brick work with Ist class bricks having cement and sand mortar of ratio 1:6 on all the walls, each of 9” thickness. The area inside the wall shall be duly filled by mud up to the height of appropriate level from ground level and shall be duly watered & rammed. Above the filling C.C. of ration 1:6:12 (Cement sand and brick ballast) giving 4” layer shall be provided. Above C.C. layer RCC layer having 4” thickness and with ratio 1:2:4 of cement sand and stone ballast shall be provided Re-enforcement shall be provided by providing net of (8 Nos. + 8 Nos.) M.S. rods of size 10 mm dia and each of 5’ length in the middle of the top of C.C. layer. The plinth shall be plastered with 12mm thick plaster in ratio 1:4 at all sides. This work will include cost of labour, T&P and all material required for construction of plinth which shall be provided by the contractor as per RESSPO Norms.

Dismantling and removal of following material from the existing line and then stacking in the respective JE’s (Store) as per direction of Supervising Engineer. It includes the work of cartage, cost of labour, T&P carrier etc. required for proper completion of work.

Dismentling of old and used conductor/ABC/XLPE Cabel

Dismentling of old and used ST Pole

Dismentling of 25KVA Distribution Transformer

Dismentling of 100KVA Distribution Transformer

Dismentling of 160 KVA Distribution Transformer

Dismentling of 250KVA Distribution Transformer

P K ENTERPRISES

Vivek Electricals