NIT No.06 /EE(EnM)M-7/2025-26 Item 04

Dismantling of old panel, removing of cable connection, & shifting the panel & accessories from site in store in same premises.

LT Distribution panel sheet steel enclosure made out of 2mm CRCA sheet totally enclosed, powder coated free standing, floor mounted type, dust& vermin proof, outward opening, lockable doors having hidden hinges and a bolted back cover both using non-deteriorating neoprene rubber gaskets to provide IP protection .The each part of the fabricated panel will be strictly subjected to seven tank treatment. The various components, assemblies and sub equipments of the panel will be as per standard given in relevant IS. The bus bar of the panel will be shaped out of high conductivity, electrolytic conductor and shall be liberal sized in aluminum. The control wiring of the panel will be done with PVC flexible copper wires of 1.5mm cross section. Each wire will be terminating with a ferule crimped to the wire, size 1500MM x1200x375mm. Having following components of approved make.

MCCB 415V, FP 3phase 50ka 50Hz,630 Amp with spreader & Handle - Make L&T/siemens/ DJB Approved

MCCB 415V, TP 3phase 50ka 50Hz,160Amp with spreader& Handle - Make L&T/Siemens/ DJB Approved

MCB Single pole 6Amp. Make L&T/Havells/ DJB Approved

MCB Triple pole 63AmpMake L&T/Havells/ DJB Approved

MCB Triple pole 32AmpMake L&T/Havells/ DJB Approved

PVC insulated Aluminum armored cable 3.5 core 120sqmm Make: Havells/Polycab/Gloster/ DJB Approved

Power capacitors 415V unit of 25Kvar Make: Epcos/ DJB Approved

Power Contactor MNX 185 or equivalent. Make L&T/Havells/DJB Approved Make

On Load Manual Changeover Switch of 400 Amp in SS Enclosure with operating handle. Make L&T/Havells/DJB Approved Make

Thermal Overload Relay of range 20A to 33 A. Make L&T/Havells/DJB Approved Make

Digital Amp. Meter Make AE/L&T/ DJB Approved Make

Digital Volt Meter0-500V -Make AE/L&T/ DJB Approved Make

Motor protection Relay Model No. MPR 200NX or equivalent Make: L&T/ DJB Approved Make

Indicating lights LED type RYB & On/OFF Make : L&T /Havells/ DJB Approved Make

Current Transformer200/5 Make AE /Advance/Saviour

Current Transformer400/5 Make AE /Advance/Saviour

Fitting of the above components in panel enclosure with terminal blocks, channels, ferrules, thimble, support insulator on bus bar, required hard wares complete in all respect.

Loading ,unloading by crane or heavy labor and cartage up to site cleaning & dressing the surface for Installation of the panel at site on base frame ,laying of cable ,termination of cable both incoming & out going side

Testing & commissioning of panel, as per required parameters with relevant IS .testing of the panel prior to switching on as follow 1 Continuity and earth testing 2 Meggaring of all equipment’s for phase to phase, neutral to body, neutral to earth and phase to earth.

Shakti Trading Co. (BID ID -1599826)