CONSTRUCTION OF SHED FOR THE GYM AREA AND SUPPLY AND INSTALLATION OF EXHAUST FAN AT STC DHARWAD

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.12.1.1 1.00 mm thick with zinc coating not less than 275 gm/m²

Steel work in built up tubular ms grill (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.2 Hot finished tubes

Providing and laying C.C pavement of Mix M-25 with ready mixed concrete from batching plant.The ready mixed concrete shall be laid and finished with screed board vibrator vacuum dewatering process and finally finished by smooth finish as per direction of Engineer in charge

14.4 Making the opening in brick masonry including dismantling in floor or walls by cutting masonary and making good the damages to walls, flooring and jambs complete to match the existing surface including disposal to mulba/rubbish to the nearest municipal dumping ground,all complete as per the direction of Engineer-in-charge.

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

2.6 Earth work in excavation by mechanical means (Hydraulic excavator )/manual means over areas (exceeding 30 cm in depth ,1.5m width as well as 10 sqm on plane) including getting out and disposal of excavated earth lead upto 50m and for all lift,as directed by Engineer-in-charge 2.6.1 All kind of soil

Providing and laying in position plain cement M10 concrete for levelling course for all works in foundations The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevent IS code machine mixed,laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators,including all lead & lift ,cost of materials of quality ,labour etc

Providing and installing an(upvc) exhaust-type ventilation system in the existing fully covered Kabaddi shed/gym by cutting the existing wall/roof sheeting and fixing exhaust units to improve air circulation .This work involves the cutting the existing sheet and providing exhaust system as per the direction of engineer in charge

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)