Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.2 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹49.3 L+₹5.6 L (12.8%)Rejected-Finance | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹49.4 L+₹5.7 L (12.9%)Rejected-Finance | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹49.4 L+₹5.7 L (12.9%)Rejected-Finance | L4 | Rejected-Finance Not Being L1 | |
| 5 | L5₹49.8 L+₹6.1 L (13.9%)Rejected-Finance | L5 | Rejected-Finance Not Being L1 |
Tender Value
Refer Docs
EMD Value
₹82,000
Closing Date
12 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER I GOS
GARRISON ENGINEER I GOPALPUR MILITARY STATION PO GOLABANDHA DIST GANJAM ODISHA 761052
CERTAIN MAINTAINS WORK OF B R AND E M NATURE UNDER GE I GOS
2023_MES_634086_1
8000/102/2023-24/1001/E8
Open Tender
Civil Works
Item Rate
180 days
GOS
As per tender documents
6 documents required · 6 mandatory
₹500
GARRISON ENGINEER I GOS
₹82,000
21 Mar 2024
23 Dec 2023
13 Jan 2024
23 Dec 2023
12 Jan 2024
6 Jan 2024
Amount
M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.
M&L for preparing old plastered surfaces of walls by washing, rubbing down and scraping of existing distempering/painted surfaces etc and applying one coat of distemper oil emulsion complete all as specified and as directed.
M&L for complete removal of existing treatment and applying two coats of walls with distemper oil emulsion white or tinted over alkali resistant primer including 3 mm thick wall care putty complete all as specified and as directed.
M&L for preparation of old decorated plastered or unplastered surfaces of wall cornices etc by brooming down or steel wire brushing, scraping down, the surfaces covered by smoke soot, growth of moulds and moos, efflorescent, having oil and gresase spots and applying one coat of cement base paint (white or tinted) complete all as specified and as directed
M&L for complete removal of existing treatment on walls and applying two coats cement base paint complete all as specified and as directed.
M&L for complete removal of existing treatment on wall including removal of vegetation and apply finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.
M&L for Preparation of old painted surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for Preparation of new or untreated surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and as directed.
M&L for Preparation of old painted surfaces of steel and iron surfaces of steel surfaces of any description, over 10cm in width or girth, not otherwise described, applying one coat of synthetic enamel paint complete all as specified and directed
Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed
M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished flat surface of concrete complete all as specified and as directed.
M&L for 25 mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) complete all as specified and as directed
Taking down the Chowkhats or frames not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and as directed
Taking down the Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each (without taking off shutters from the frames) complete all as specified and as directed
Taking down the Shutters of any description n exc 1 sqm each complete all as specified and as directed
Taking down the Shutters of any description exc 1 sqm and n.exc 2 Sqm each complete all as specified and as directed
M&L for refixation of shutters of any description in same opening n exc 1 sq. m each complete all as specified and as directed
M&L for refixation of shutters of any description in same opening exc 1 sq. m but not exc 2 Sqm each complete all as specified and as directed
M&L for IInd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.
M&L for 35 mm thick IInd Class Hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete as specified and directed.
S&F 30mm thick, glazed/skelton shutters with second class hard wood,open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (a) complete as specified and directed.
S&F 35mm thick, glazed/skelton shutters with second class hard wood,open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (a) complete as specified and directed.
S&F for Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing in SSR Part II 2010 complete all as specified and as directed
S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 complete all as specified and as directed
M&L for fixed in repairs pelmet boxes or in narrow widths n. exc l5cm each, 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and as directed.
M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and fixed with wooden beading complete all as specified and as directed
M&L PCC 1:2:4 type B0 (using 12.5 mm graded aggregate) as in hold fast and filling of steel chowkhat etc. complete all as specified and directed
S&F for mild steel flat iron as in hold fast 25x6 mm confirming to Fe290 Gde E-165 complete all as specified and directed
S&F for mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
S&F for 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.
S&F for 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.
S&F for 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed.
S&F for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
S&F in repairs 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
S&F in repairs 75 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F in repairs Aluminium anodised barrel tower bolts of extruded section 100 mm long complete all as specified and directed.
S&F in repairs Aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts of extruded section 100 mm long complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.
S&F in repairs 75 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed
S&F in repairs 100 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed
S&F 75 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed
S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed
S&F in repairs Aluminium Handle 100 mm long cast type, anodised extruded fabricated type complete all as specified and as directed.
S&F in repairs Aluminium Handle 150 mm long cast type, anodised extruded fabricated type complete all as specified and as directed.
S&F Aluminium Handle 100 mm long cast type, anodised extruded fabricated type complete all as specified and as directed.
S&F Aluminium Handle 150 mm long cast type, anodised extruded fabricated type complete all as specified and as directed.
S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed
M&L for coloured glazed ceramic tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick plastering in CM 1:4 as a backing coat complete all as specified and directed.
M&L for Coloured Glazed ceramic tiles in vertical surface of size 450X 350X 7 mm thick over 10 mm thick back coat of cement mortar in 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed.
M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in 1:6 for laying floor finishes complete all as specified and as directed
M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in 1:6 for laying floor finishes complete all as specified and as directed
M&L for light shade vitrified Ceramic tiles 10 mm thick (Square/rectangular) polished, area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed in CM 1:6 complete all as specified and directed.
M&L for light shade vitrified Ceramic tiles 10 mm thick (Square.rectangular) polished, area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backcoat in CM 1:4 complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25 mm thick laid over 15 mm thick screed bed or bedding layer of cement mortar in 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed
M&L for Machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick back coat of cement mortar in 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed
M&L for 20 mm thick Granite (of any type) work (table rubbled and polished) in steps, Jambs, Pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm screed complete all as specified and directed
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed
Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed
M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed
M&L for 40 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) in sub base finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed
Dismantling of water tank Capacity exc 250 not exc 500 Ltrs and removing to store complete all as specified and as directed
Dismantling of water tank Capacity exc 500 not exc 1000 Ltrs and removing to store complete all as specified and as directed
Hoisting and Fixing of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 ltrs hoisted and fixed in position specified in SSR Part I complete all as specified and as directed.
Hoisting and Fixing of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 ltrs hoisted and fixed in position specified in SSR Part I complete all as specified and as directed.
S&F for 20 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
S&F in repairs for 20 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
S&F in repairs for 25 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
S&F in repairs white vitreous china squatting pan orissa pattern of size 580mmx440 mm white, with integral foot rests connected with 'P' or 'S' trap and flushing pipe and taking out old WC & connections complete all as specified and as directed
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed
S&F for Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device
S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed
S&F in repairs PVC low level flushing cistern 10 litre capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC conection pipe and flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and directed
S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long Brass Chromium plated between flanges complete all as specified and as directed
S&F in repairs soap dish vitreous china coloured approximate size (160mmx160mmx90mm) complete all as specified and as directed.
S&F in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.
S&F for Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), including providing and fixing plugs, bedding urinal against wall in cement mortar :2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)
S&F in repairs 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F in repairs 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F in repairs 15 mm bore dia cast copper alloy fancy type, chromium plated stop valves, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs 20 mm bore dia cast copper alloy fancy type, chromium plated stop valves, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs 15mm stop valves (concealed type), cast copper alloy fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs 20mm stop valves (concealed type), fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repair pillar taps of size 15mm, chromium plated fancy type cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.
S&F in repairs for bib taps fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore in repair complete all as specified and as directed.
S&F in repairs for Brass chromium plated shower rose 125 mm size fixing to steel pipe or union complete all as specified and as directed
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed
Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed
S&F 15 mm dia GI Tubes, 'Medium grade'galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed
S&F 20 mm dia GI Tubes, 'Medium grade'galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed
Supply and laying of 20mm of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. tranches complete all as specified and directed.
Supply and laying of 25mm of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. tranches complete all as specified and directed.
S&F for 20mm dia CPVC Brass thread elbow complete all as specified and as directed.
S&F for 25mm dia CPVC Brass thread elbow complete all as specified and as directed.
S&F for 20mm dia CPVC Brass thread Tee complete all as specified and as directed.
S&F for 25mm dia CPVC Brass thread Tee complete all as specified and as directed.
S&F for 20mm CPVC Brass thread union complete all as specified and as directed.
S&F for 25mm CPVC Brass thread union complete all as specified and as directed.
S&F for 20mm CPVC ball valve complete all as specified and as directed.
S&F for 25mm CPVC ball valve complete all as specified and as directed.
S&F for 25mm CPVC tank adopter complete all as specified and as directed.
S&F for 20mm CPVC tank adopter complete all as specified and as directed.
S&F in repairs Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed
S&F in repairs PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement including disconnection of old existing trap, and connected with existing water pipe complete all as specified and directed.
S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.
S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed
M&L for cutting chases, pinning in brickwalls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20 cm girth complete all as specified and as directed.
S&F for 150 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed
S&F in repairs 32 mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm?45gms/40mm-60 gms) complete all as specified and as directed
S&F in repairs 40 mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm?45gms/40mm-60 gms) complete all as specified and as directed
M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
S&F in repair 4 levers brass mortice lock, verticle type, size 100mm. complete all as specified and as directed.
S&F for Aluminium (Extruded section body) door closer hydrau?lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
Disconnecting existing tanks exc.250 Ltrs not exc. 500 Ltrs setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and as directed.
Disconnecting existing tanks exc.500 Ltrs not exc. 1000 Ltrs setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and as directed.
Cleaning and removing all scale and dirt, etc, from tanks exc.250 Ltrs not exc. 500 Ltrs and from mouths of circulating pipes, etc. complete all as specified and as directed.
Cleaning and removing all scale and dirt, etc, from tanks exc.500 Ltrs not exc. 1000 Ltrs and from mouths of circulating pipes, etc. complete all as specified and as directed.
S&F for Anodised aluminium ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed
PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed
S&F in repairs 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
S&F in repair Parryware casecade health faucet hose and hook complete all as specified and directed. (Cat Part No T-9937A1) complete all as specified and directed.
S&F in repair 15mm dia Angle Stop Cock with wall flange all as specified and directed. (Cat Part No G1807A1) complete all as specified and as directed.
S&F in repair Parryware Corner shelf all as specified and directed (Cat Part No T6010A1). complete all as specified and as directed.
S&F in repairs PVC waste pipe of 32 mm size flexible and 1.2 mtr long, fitted to basin or sink complete all as specified and as directed.
S&F in repairs cylindrical tank cover for 500 ltrs, 1000 Ltrs & 2000 Ltrs complete all as specified and directed.
M&L Water proofing treatment on RCC roof etc. comprising with the following operation & as specified herein below:- (a)Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100 m n.exc.250m. (b) M&L for 15 mm thick cement mortar in 1:4 finished even and smooth. (c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per sqm conforming IS-3384. (e) A layer of APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (f) One coat of aluminium paint over APP membrane @0.11Kg/Sqm. Note:- Prior to execution of the APP Membrane works, leak proof test shall be done by ponding water on roof slab to minimum depth of 25 mm. The entire roof slab shall be flooded with water for 48 hours. The necessary barrier shall be made to make feasible to stagnate water for 48 hours on roof slab.
Dismantling asbestos cement (corrugated semicorrugated etc) sheet in roof covering complete all as specified and as directed.
S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed
S&F for rolled mild steel in steel work tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.
M&L for painting steel and iron surfaces of steel surfaces of any description, over 10cm in width or girth, not otherwise described, applying two coats of synthetic enamel paint over coat of red oxide primer including preparation of new surface complete all as specified and directed
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
M&L for Anodised aluminium snap grid size 605 X 605 mm frame work for false ceiling complete all as specified and as directed
S&F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed
M&L for 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed
M&L for preparation of new plastered surface of ceiling/boards etc and applying three coats of white wash complete all as specified and directed
M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm and 5 mm thick) in cement Mortar in 1:4 using water proofing compound in top layer (Water Proofing Compound measured separately) and finished even and smooth (without using extra lime or cement) complete all as specified and directed.
M&L for rendering 10 mm thick internal wall on fair faces of brick work or concrete surfaces in cement Mortar in 1:6 and finished even and smooth (without using extra lime or cement)complete all as specified and directed.
M&L for rendering 5 mm thick on ceiling in cement mortar 1:3 finished even & smooth without using extra cement complete all as specified and directed
Supply only Liquid water proofing compound for external wall plastering (for 5 mm thick plastering) complete all as specified and directed
M&L for preparation of new plastered surface of walls etc and applying two coats of cement base paint over alkali resistant priming paint including complete all as specified and directed
M&L for preparation of new plastered surface of walls etc and applying two coats of distempering interior walls with distemper oil emulsion white or tinted over chalk whiting complete all as specified and directed
M&L for preparation of new plastered surface of ceiling etc and applying three coats of white wash complete all as specified and directed
S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed
S&F In repairs steel tubular swaged pole complete with cast iron base plate , finial taper plug bolts nuts and screws as specified type 410 SP 55 of 11 mtr long for HT OH line complete all as specified and directed.
S&F In repairs HT 11KV 3 phase outdoor type single throw, single break off load gang operated insulator air break switch 200A capacity with 9 insulators for horizontal mounting with fixed and moving contact compete with operating rod of suitable length and size, locking arrangement etc including taking down unserviceable ones all as specified and directed. Make : Pactil/Atlas/High tension switchgear/Versatec
S&F In repair horn gap fuse 11 KV 200 Amps horizontal/vertical type for outdoor use including all connected accessories complete all as specified and directed.
Material and labour for cross arms, bracing support, clamps & back plates fabricated from structural steel section including nuts, bolts, washer, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated & directed and inclusive of one primer coat, one under coat and one finishing coat of paint including dismantling the existing unserviceable ones all as specified and directed.
S&F In repairs lightening arrestors expulsion type complete with all fittings, transmission class, discharge capacity 15 kilo amps including taking down unserviceable/damaged lighting arrestors all as specified and directed. Make : Oblum / Areval/JSI
S&F In repairs Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and red colout and fixed with M.S clamps, bolts and nuts of approved size, for HT 25x20cm size.
M&L for anti-climbing device spike type fabricated out of MS bars(round square and flat)including nuts,bolts,washers and welding in two halves made to shape to suit the cross section of the pole.
S&F disc insulator gun fitting assy for tension with tension clamp, porcelain, vitreous 145mm high kand 255mm dia, ball and socket type working pressure 11000 Volts ( Make:-BHEL/oblum or equivalent approved by Engr-in-Charge).
Supply and fixing of pin insulator, porcelain,vitreous with galvanized MS spindle two steel washers and nuts size 150mm heightx150mm dia 11000Volts ( Make:-BHEL/oblum or equivalent approved by Engr-in-Charge)
M&L In repairs aluminium conductor steel reinforced complete all as specified and diretcted to be used for jumpers.
S&F in repairs AB conductor of size 100 sqmm with colour code (RYB) as required on ground for Four pole structure complete all as specified and directed.
PCC (1:3:6) type C-2 (using 40 mm graded broken stone aggregate) as in foundation of pole/.
PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in coping including necessary form work complete.
Material & labour for decarbonising / cleaning LT Panel / pillar boxes of 415 Volts 3 phase bus bar chamber with electrical connections, removing all the bus bar links from the panel, checking its condition. Cleaning the total bus chamber with CTC solution / application of doctor bectol solution on complete bus bar. The painted bus bar links shall be heated in presence of metal halloid lamps until it achieves its meggar value. Using of vaccum cleaner is essential during decarbonising of panel. Checking all the connections, tightening the nuts, bolts & thimbles of in-coming/out-going system complete incl replacement of defective rusted bolts & nuts with new ones all as specified and directed.
Material & labour for LT 1100 V end termination with suitable size of lugs duly crimped for LT 2 / 3.5 / 4 core armoured aluminum conductor cable of size any core,any size after isolating, supply to transformer / LT panel and disconnecting burnt / fault cable from the bunch of cables connecting back after end termination testing and commissioning all as specified and directed.
Excavation in trenches in hard/dense soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out pole foundation/cable trench complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.
Removing surplus excavated material not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
Supply and providing sand cushioning with dry clean sand 8 cm below cable and 15 cm above the cable complete all as specified and directed. Note : Punned thickness shall be measured for the purpose of payments.
Supply and laying Fly ash bricks in trenches for cable protection with length of brick perpendicular to length of cable complete all as specified and directed.
Material and labour for filling the road / hard standings cut for laying cable with PCC 1:2:4, type B2, using 40 mm graded stone aggregate and finishing the surface even and smooth without using extra cement all as specified and directed.
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cables heavy duty 1100 volts grade, with stranded aluminium conductor with all fixing & connecting accessories such as aluminium cable lugs, cable gland, nut, bolts, washer etc Including taking out existing unserviceable cable of 3.5 core x 50 Sqmm sizes complete all as specified and directed:- Make: Polycab/havells/gloster
All as per item No 177 above but sizes 3.5 core x 35 Sqmm
All as per item No 177 above but sizes 3.5 core x 25 Sqmm
All as per item No 177 above but sizes 4 core x 16 Sqmm
All as per item No 177 above but sizes 2 core x 10 Sqmm
S & F In repairs LT Cable joining kit heat shrinkabale complete with jointing materials suitable for LT Armoured cable 4 core of size 10 to 16 Sqmm all as directed (Make 3M / Reychem)
S & F In repairs LT Cable joining kit heat shrinkabale complete with jointing materials suitable for LT Armoured cable 3.5 core of size 25 to 50 Sqmm all as directed (Make 3M / Reychem)
S & F In repairs LT Cable joining kit heat shrinkabale complete with jointing materials suitable for LT Armoured cable 3.5 core of size 70 to 150 Sqmm all as directed (Make 3M / Reychem)
M & L GI tubing light grade with all fitting(ISI marked) for protection of cable fixed to pole/wall / laid under floor or road including necessary joints and clamps complete all as specified and directed for sizes 80 mm bore.
All as per item No 185 above but sizes 50 mm bore
All as per item No 185 above but sizes 40 mm bore
Boring of holes horizontally for laying of pipe not less than 100 mm dia (min depth 0.90 mtr to 0.120 mtr from top level) under road, hardstanding by trench less technology for passing cable through pipe with mechanical/hydraulic/compresser pressure pump machine system throughly so the surface of road can not be disturbed or cracked all as specified and directed.
Painting to existing steel tubular LT poles , 9m long including cross arms, channels, angle iron support, bracings, clamps etc. with two coats of aluminium paint superior quality of approved make on surface expose to view and making 30 cm wide strips (total 5 Nos) with white and black paint alternatively on external surface above PCC benching including prepration of old painted surface by scraping complete all as specified and directed by Engr-in-Charge.
M&L for pole earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge earth plate at a depth not less than 1.5 mtr below ground level, connected to earth lead of wire4mm dia by means of nuts, bolts, check nuts & washers made of galvanized iron or steel and connected to main switch board or main control board as directed, charcoal or coke and salt in alternate layers, necessary excavation and earth work in hard/dense soil complete all other accessories as shown on electrical plate No 5 of MES Sch Pt-I including 50mm bore light grade 1.8 mtr length with top end covered with plug or cap for watering and 30x30x30 cm size PCC 1:3:6 block around waterin g pipe,excluding 20mm dia watering pipe,PCC,watering pit,funnel,pit cover complete all as directed.
M&L PCC 1 : 4 : 8 type D2 using 40mm graded stone aggregates as in foundation of manholes, posts etc complete all as specified.
M&L 100mm thick Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stone ®
M&L cement concrete 1:3:6 type C 2 (20mm graded stone aggregate) as in sub base, hard standing of 75mm thick, complete all as specified.
M&L cement concrete 1:2:4 type B 2 (20mm graded stone aggregate) as in finished floor of 75mm thick, complete all as specified.
M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 finished even and smooth without using extra cement complete all as specified.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering
Trimming of trees and cutting of tree branches carefully upto 3 mtr clear distance from wire/cables/conductor/panel boards along LT over head electric line using all required safety equipment for each length of approx 40 metre long complete all as specified and as directed by Engr-in-charge
Cutting wild grass, bushes, creaper, unwanted vegitation from inside / surrounding of installations including cutting creapers from barbed / cattle fencing of the installations as when directed and removing of unwanted material from installation compound and depositing where directed. Note :a) The item shall be operated maximum four times in entire period of contract in the same installations. (Area measured separately each time). (b) Measurement of cleaning fencing will be measured based on the height between top line and bottom line of barbed wire/ chain link / cattle fencing multiplying by the length involved.
Taking down carefully copper/aluminum point wiring (light, fan/exhaust fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders, brackets, bulk head fittings etc removing material to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.
Material and labour for one light point controlled by one, one way switch point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts cable and including PVC casing and caping of suitable size (as per conductor run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly by providing lugs including sunk in pressed steel terminal boxes of 1.6 mm thick concealed in wall (duly painted with two coats of black bituminous paint over a coat of red oxide primer in and out sides) with and including cutting holes for switches, sockets, regulators etc as per requirement including fixing with machine screw, washer etc all as specified and as directed by the Engineer-in-Charge. Make of wire : Finolex/Plaza/Polycab/Havells.
All as per item No 201 above but one fan/exhaust fan point controlled by one, one way switch
All as per item No 201 above but one 5 Amp socket point controlled by one way switch on independent board.
All as per item No 201 above but one 5 Amp Socket point controlled by one way switch on the same board with other switches.
All as per serial item No 201 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.
Material and labour for socket outlet 2 in 1, 3 pin, 5A flush type complete all as specified and directed. Make : Indo Asian/Plaza/Havells.
Material and labour for socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp flush type complete. Make : Indo Asian/Plaza/Havells
Material and labour for Switch piano flush type single pole one way 15 Amp complete. Make : Indo Asian/Plaza/Havells.
Material and labour for Switch piano flush button 5 Amps complete. Make : Indo Asian/Plaza/Havells.
Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge.
Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 4 Sqmm multi -strand copper conductor drawing in PVC casing caping with 4 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as directed. Make : Finolex/Plaza/Polycab/Havells.
Supply and fix Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 8 way (Double door) with 200 amp rated bus bar all as specified and directed. Make : Indo Asian/Legrand/Havells.
Supply and fix Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 4 way (Double door) with 200 amp rated bus bar all as specified and directed. Make : C&S/Legrand/L&T.
S&F Isolator DP 40A, 240 volts all as specified and directed by Engr-in-Charge. Make : C&S/Legrand/L&T.
S&F MCB SP up to 40 Amp, 240 volt all as directed. Make : C&S/Legrand/L&T.
S&F Ceiling Fan regulator electronic step type all as specified. Make : Havells/CG/USHA/Bajaj.
Supply only Oil filled capacitor of 2.5 MFD, 240 Volt suitable for ceilling/ exhaust fan complete all as specified and directed. Make : Universal/ Usha/Electro
S&F modular switch single pole 1 way 6A, complete Including taking down unserviceable switch all as specified and directed. Make : Crabtree/CONA/Havells.
S&F modular socket outlet 6A 2/3 pin combined 2 module complete Including taking down unserviceable socket all as specified and directed. Make : Crabtree/CONA/Havells
S&F modular switch 16A single pole one way complete Including taking down unserviceable switch all as specified and directed. Make : Crabtree/Cona/Havells.
S&F socket outlet 6A/16A- 2/3 pin combined 2 module complete all as specified and directed. Make : Crabtree/Cona/Havells.
M&L for modular Bell push Switch single pole one way 6A/10Amps complete Including taking down unserviceable ones all as specified and directed. Make : Crabtree/Cona/Havells.
M&L for call bell modular type AC 230 volt single pole complete Including taking down unserviceable ones all as specified and directed. Make : Crabtree/Cona/Havells.
M&L for fan step regulator, 120, W-2 module complete Including taking down unserviceable ones all as specified and directed. Make : Crabtree/Cona/Havells.
Supply and fixing Ceiling Fan 1200 mm sweep with blade, down rod complete all as specified and directed. Make: Polycab/Bajaj/Havells
Supply and fixing exhaust fan 300 mm sweep, 1400 RPM with louver complete all as specified and directed. Make: Polycab/Bajaj/Havells
S & F LED light fitting 1 x 10 Watt T5 Alumnium batten type, indoor decorative PC housing extruded T5 Al LED battens with extruded aluminium housing and integrated LED driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size incl taking down the old USNV complete all as specified and directed Make: Surya/Philips/Havells
Supply and fix LED Lamp pin type 9 watt all as specified and directed by the Engineer-In-charge. Make : Philips/Surya/Havells
Energy efficient LED integrated batten suitable for indoor applications tube light fitting 1x20 Watt 4 FT complete, all as specified and directed. Make: Surya/Philips/Havells
S&F ceiling LED down light 6 watt round/square complete including taking down old unsv complete all as specified and directed. Make : Surya/ Philips/Havells.
All as per item No 230 above but 9 watt
All as per item No 230 above but 12 watt
All as per item No 230 above but 15 watt
S&F recess/ceiling ultra slim down lights 36 watt LED (600x600mm) size, ultra slim with extruded alumininium housing and milky diffuser complete including taking down old unsv complete all as specified and directed. Make : Surya /Havells/Philips
S&F Surface mounted ultra slim down lights 36 watt LED (600x600mm) size, ultra slim with extruded alumininium housing and milky diffuser complete including taking down old unsv complete all as specified and directed. Make : Surya /Havells/Philips
Supply only AC three phase ,415V ,50Hz, digital,electronic tamper proof energy meter of rating 10 to 60 Amps covered with PVC transparent cover with optical communication port complete all as specified and directed
Supply only AC single phase ,1x 240V ,50Hz, digital,electronic tamper proof energy meter of rating 10 to 60 Amps covered with PVC transparent cover with optical communication port complete all as specified and directed
S&F of 3 layer PP-R (polypopropylene random co-polymer) pipes SDR 7.4/PN16 UV steblised and antimicrobial fusion welded having thermal estability for hot and cold water supply all PP-R plain end brass threaded polypopropylene randum fittings laid in trenches 63 mm O/D complete with all connected fittings incl taking down old unsv all as specified and directed (ISI marked) Make : KPT/SFMC/SUPREME.
S&F of 3 layer PP-R (polypopropylene random co-polymer) pipes SDR 7.4/PN16 UV steblised and antimicrobial fusion welded having thermal estability for hot and cold water supply all PP-R plain end brass threaded polypopropylene randum fittings laid in trenches 50 mm O/D complete with all connected fittings incl taking down old unsv all as specified and directed (ISI marked) Make : KPT/SFMC/SUPREME.
S&F of 3 layer PP-R (polypopropylene random co-polymer) pipes SDR 7.4/PN16 UV steblised and antimicrobial fusion welded having thermal estability for hot and cold water supply all PP-R plain end brass threaded polypopropylene randum fittings laid in trenches 32 mm O/D complete with all connected fittings incl taking down old unsv all as specified and directed (ISI marked) Make : KPT/SFMC/SUPREME.
S&F of 3 layer PP-R (polypopropylene random co-polymer) pipes SDR 7.4/PN16 UV steblised and antimicrobial fusion welded having thermal estability for hot and cold water supply all PP-R plain end brass threaded polypopropylene randum fittings laid in trenches 25 mm O/D complete with all connected fittings incl taking down old unsv all as specified and directed (ISI marked) Make : KPT/SFMC/SUPREME
S&F in replacement of PP-R gate valve 32 mm (brass insert) O/D complete. Make : SFMC/SUPREME/KPT (ISI mark)
S&F in replacement of PP-R gate valve 25 mm (brass insert) O/D complete. Make : SFMC/SUPREME/KPT (ISI mark)
S&F foot valve 50/63 mm dia CI/GI with complete fittings including taking out old unsv all as specified and directed as per sample approved by Engr-in-Charge.
Taking down unsv pump set 5 HP capacity from connected pipe line, dismantling existing motor/pump, rewinding motor by supper enamelled copper wire with existing size, insulation and varnishing complete, replace wornout ball bearing and gland packing of existing pump set and refitting the repaired pump set on pipe line, testing and commissioning complete all as specified and directed.
Taking down unsv booster pump 05 HP capacity, 3 phase from UG sump from existing connected pipe line, dismantling existing motor/pump, rewinding motor by supper enamelled copper wire with existing size, insulation and varnishing complete, replace wornout ball bearing and refitting the repaired booster pump on pipe line, testing and commissioning complete all as specified and directed.
V.Venkata Ramaiah
R K Traders
M/s MAA BHAIRABI ENTERPRISES
HARAGOURI SUPPLIERS
M/s Ats Electricals
DHABALESWAR ENGINEERING WORKS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .