Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹54.1 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹59.9 L+₹5.5 L (10.1%)Rejected-Finance 9 SHUBHASH BHAWAN RAJENDAR MARG MOUNT ABU 307 501 | MOUNT ABU | SIROHI | RAJASTHAN | 307501 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹73.8 L+₹19.4 L (35.6%)Rejected-Finance NO 943 0 56 VILL PO PATHRERI TEH KOTPUTLI DIST JAIPUR RAJASTHAN 303 107 | JAIPUR | RAJASTHAN | 303107 | L3 | Rejected-Finance Other than lowest bidder |
Tender Value
₹72.8 L
EMD Value
₹1.4 L
Closing Date
3 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF JAISALMER
AIRFORCE STATION JAISALMER RAJASTHAN
PROVISION OF KITCHEN CABINETS AND ALLIED WORK SERVICES IN SMQ AT AIR FORCE STATION MOUNT ABU RAJASTHAN
2023_MES_633322_1
80283
Open Tender
Civil Works
Item Rate
300 days
AGE (I) (AF) MOUNT ABU
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹1,000
AGE (I) AF MOUNT ABU
₹1.4 L
Yes
27 Mar 2024
18 Dec 2023
5 Feb 2024
18 Dec 2023
3 Feb 2024
22 Jan 2024
Amount
Demolition of cement concrete (reinforced) roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, any description and in any position not otherwise specifically provided and cutting reinforcement as required to facilitate demolition complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry, laid dry complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed.
Cutting chases in brick wall, stone, concrete block walls and slabs, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
Cutting holes superficial area exceeding 400Sqcm but not exceeding 0.10Sqm into or through brick walls or stone walls or concrete block walls built in cement mortar and making good in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required complete all as specified and directed.
Cutting holes in granite stone and RCC slab for LPG gap pipe complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing the rubish off the premises complete all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons, dados, etc. laid bedded and pointed in any mortar and removal of rubbish from site complete all as specified and directed.
Taking up or down 15mm dia steel tubing and connections and fittings, including cleaning for refixing or removal from site complete all as specified and directed.
M&L for brick work in half brick thick wall built in cement mortar (1:4) using sub class 'B' old size bricks straight or curved in plan to any radius complete all as specified and directed.
M&L for Reinforced Cement Concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
S&F 10mm dia and over mild steel TMT bars as in reinforcement cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends binding with MS wire annealed n.exc 0.9mm or with securing clips etc complete all as specified and directed.
M&L for 15mm thick rendering cement plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls, surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for 18-20mm thick machine cut Granite slab (of any approved colour), as in kitchen platforms, flooring and other similar works including mouldings and rounding the edges of stones, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed of beding layer in cement plaster (1:6) complete complete all as specified and directed.
M&L for 18-20mm thick machine cut Granite slabs, (any approved colour),as in verticle surfaces, dados, skirings and similar works including mouldings and rounding the edges of stones bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 10mm thick screed of beding layer in cement plaster (1:4) complete complete all as specified and directed.
M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete to match in floor over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
M&L for 300 x 450x 7mm thick digital design glazed ceramic tiles as in vertical surfaces of walls such as dados,skirtings , risers and the like ; set, jointed in neat cement slurry and pointed in white or coloured cement on over and including 10 mm thick cement plaster in cement sand mortar (1:4) , t to match the same complete all as specified and directed.
M&L for formwork to fair finished sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
M&L formwork to fair finished soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping complete all as specified and directed.
M&L for old surface of ceiling by scrapping and washing including preparation of surface by applying one coat of white washing all as specified and as directed.
M&L for preperation of new plastered surfaces of walls and distempering with two coats of Oil Bound Distemper over a 3mm thick layer of wall care white putty complete all as specified and directed.
M&L for Complete removal of existing treatment and preperation of old plastered or unplastered surfaces of walls and distempering with two coats of Oil Bound Distemper complete all as specified and directed.
S&F 16mm diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings including brass fittings such as elbow, tee, coupler, reducer, socket, brushing, step over bends, end plug, etc. jointed with CPVC solvent cement only and fixed to wall and ceiling conceald pipe work or laid in floor with powder coated metal clamp, etc. complete all as specified. complete all as specified and directed.
S&F in repair PVC waste pipe flexible type 25mm dia suitable for couplings 32mm and 40mm dai 600mm long complete all as specified and directed
S&F in repair 75mm diameter of outlet Cast iron Nahani Trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints laid in trenches or in floors complete all as specified and directed
S&F in repair 15mm bore chromium plated brass mixer for kitchen sink long body tab wall mounted with 150mm long swivel spout, wall flange for mixing hot & cold water screwed down for iron pipe or ferrule complete all as specified and directed
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F 18mm thick HDHMR board exterior grade including 1.00mm thick acrylic high gloss sheet over HDHMR board one side and other balancing white prelamination, antifungal, moisture resistant and anti borer as per IS: 14587 for frame and shutter for kitchen cabinet /cup boards etc complete all as specified and directed. Note:- Makes of materials shall be samples as approved by AGE.
S&F 18mm thick UV coating MDF board exterior grade both sides laminated , antifungal, moisture resistant and anti borer as per IS: 14587 for shelves for kitchen cabinet /cup boards fixing with first class hardwood lipping and beading etc complete all as specified and directed. Note:- Makes of materials shall be samples as approved by AGE.
S&F SS hydraulic clip hinge bright finish and magnetic catcher complete all as specified and directed
S&F 125mm dia oval shape brass handle fancy type bright finish complete all as specified and directed
Haritwal traders
VIPUL CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .