Development of Horticulture, Vertical Garden, Landscaping and Illumination Work at Education Hub, Kevdi, Diu.

Civil Works :

Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials (C) By mechanical means in area of light jungle

Providing material and labour for Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work/ Bitumen Road works

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff (B) Dense or Hard soil

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (Make specified as per appendix-1)

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete.

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level

White Stone Bela masonry block in course in sub/superstructure with stone of approved quantity in cement Mortar 1:5 (1-Cement : 5 Course Sand) including packing the joints etc. complete.

Providing 15 mm. thick single coat cement finish plaster on fair side of brick/block wall/ RCC for interior plastering upto floor two level finished even and smooth in [I] Cement mortar 1:3 (1 cement : 3 fine sand) including with necessary scaffolding, finishing, curing, making grooves, forming pattas, hacking properly RCC surface, hexagonal chickenmesh of size 20 mm. x 20 mm. of 22 gauge at junction of concrete and brick work or between different materials, etc. as directed. (for all civil, plumbing & electrical works) by the Architect and Engineer-in-charge. for

Providing and laying average 18-20 mm. thick Sand faced cement plaster on masonry work / RCC wall upto any height above ground level and for all shapes consisting of first coat (backing coat) average 12-15 mm. thick with CM 1:3 (1 cement: 3 coarse sand) rough wired finish and second coat of average 6 mm. thick uniform grained textured by using wooden Gutka, in CM 1:3 (1 cement: 3 sand), including with necessary scaffolding, finishing, curing, making grooves, forming pattas, hacking properly RCC surface, hexagonal chickenmesh of size 20 mm. x 20 mm. of 22 gauge at junction of concrete and brick work or between different materials, etc. as directed. (for all civil, plumbing & electrical works) by the Architect and Engineer-in-charge.

Providing and fixing Washed stone grit peeble Plaster with 12 mm cement plaster bedding 1:4 (1 cement: 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-incharge

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying Riverwash/natural finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineering- Charge : Flamed finish granite stone slab Jet Black or equivalent.

Providing and laying Mandana stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineering- Charge : Colour Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and Fixing Rajula stone 75 mm thk, 60 mm x 45 mm size including fixing in cement mortar as directed

Providing and fixing pre-cast Rubber Dye inter locking concrete block 60mm thick with grade of concrete M250 pnumatic compressed by mechanically pressed and as per approved design including 75mm Sand layer for levelling and filling the joint with sand in proper line and level etc complete.

Precast terrzo tiles 27 to 28mm thick with white Black or white and black marble chips of sizes upto 6mm laid in floors, treads of steps and landings on a bed of 25mm average thickness of lime mortar 1:6 jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete with precast tiles of (1) Light shades using white cement (upto 10 ton)

Providing and laying Paver Cobel Granite Stones (100 mm x 100 mmx50mm) over 1:3 cement mortar (1 cement : 3 graded medium coarse sand) bedding of average 1” thickness, floated with thick and neat cement paste with consumption of cement @4.4kg/ sqm and 2 kg /sqm for joints mixed with approved pigment to match the shade of the stone including dressing, rubbing, curing, cleaning etc. complete at all levels and heights. (the rate shall be for the patterns and details provided by the Architect. If required, residues will be provided and no extra amount will be paid for residues to be used to achieve the pattern).

Box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density,& having CBR 30% minimum, complete as per clause 401

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Providing and applying tack coat (as per MORTH section 503) with bitumen emulsion using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.

Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.50 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects with 60/70 bitumen

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects with 60/70 bitumen.

Providing and fixing pre-cast concrete kerb stone with vaccum wet hyraulic pressing technology of M250 grade cement based concrete block 60cm length,30cm height and 12.5cm thick as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete including corner, quadrants, angles, radius, dropper kerbs in all shapes (Brands: Vyara, Alcock)

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. (Brands: Vyara, Alcock)

Structural steel work in any type of works using Standard tubular sections like circular pipes, rectangular/ square hollow sections, etc of approved make and confirming to IS 1161/ IS 4923. (RHS-SHS-CHS) of Approved brand like TATA, SAIL, etc. including, priming coat and 2 coat of enamel paint, etc complete. Nuts and bolts shall be measured in weight

Supplying, and installing of Wodden flooring 19 mm thk interlocking tile of standard make such as intercraft, Floor deck etc on exisitng tiling surface with proper instruction as per vendor instructions with standard S.S scrweing etc (wood-ipe, size, 300 x 600 mm, locking-round butt-plastic base thick 13 mm - total thick ness 32 mm.) UPPER LAYER SHALL BE WEATHER COATED WITH OIL OR INGREDIENT.Rate shall include all labours, materials and other equipment to finish the job in a good manner, no extras for any wastages if any. Measurement shall be on net area of laying

SITC of Syntheric acraylic ITF approved material with below specification.1 layer is primer as per ITf standerd.2 layer of re furfacer as per ITF Standerd.3 layer of rubber coshin as per ITF standerd.2 layer of color as per client requirement. game line marking as per client requirement.all materail should be ITf approved and ratio will be as per ITF standerd.

SCULPTURES- Providing, Making and Erecting curved shape Sculpture made from MS sheet (3mm) with necessary Base support (RCC), bending, cutting, giving curved shape ,fabricating, etc for Approx 3.0 mtr ht from Plinth (Approx area of sculpture 160-175 sqmt and weight ranging 4.0 to 4.5 MT) . Rate shall include all labours, materials like, MS sheets, box section, Anti-corrosive ename paint, be and other relevant materials to finish the sculpture in a good manner as shown in Image Measurement shall be on Number basis. Wastages shall not be count in mode of measurement.as per architectural / structural drawings/designs and as directed by Engineer-in-Charge

Sculpture :Providing, Making and Erecting Parabolic shape Sculpture made from MS sheet (8mm) with necessary RCC Base support, bending, cutting, giving curved shape ,fabricating, etc for Approx 6.0 mtr ht from Plinth (Approx area of sculpture 5-6 sqmt and weight ranging 0.3-0.4 MT) . Rate shall include all labours, materials like, MS sheets, box section, SS wires of 8 mm dia to be fixed or Tightend to MS plate with Anti-corrosive ename paint, and other relevant materials to finish the sculpture in a good manner as shown in Image Measurement shall be on Number basis. Wastages shall not be count in mode of measurement.as per architectural / structural drawings/designs and as directed by Engineer-in-Charge

Metal Signage Board for Education Hub (5' x 4') 2mm SS board with details etching, with light MS 100mm x 50mm pipe for support piller with installation.as per architectural / structural drawings/designs and as directed by Engineer-in-Charge

Main Entrance Sclupture Main Entrance, 42' length, 4' height, 3" width MS structure with powder coating (with installation).as per architectural / structural drawings/designs and as directed by Engineer-in-Charge

3mm White Acrylic letters "DIU EDUCATION HUB" with GI channel letters with Samsung LED modules including transportation and installation.as per architectural / structural drawings/designs and as directed by Engineer-in-Charge

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

Supplying stacking and spreading of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment).

Carting of soil from inside plant area, including to loading , unloading and transport

Supplying , stacking and spreading of river sand at site including transportation to site . A source sample of sand, prior to stacking at site shall be got approved, the quantity of the same can be verified by volume as well as weight or density etc. soil filling up to as required.

Supplying , stacking and spreading sludge / well decayed farm yard manure from thesource approved by the engineer in charge incl. screening, loading, unloading, conveyance and stacking at site.

Mixing earth and manure or in proportion specified or directed, Spreading of dung manure or / and good earth in required thickness. and fine dressing the ground as per natural gradiant

Planting saplings of plants/ trees in the proper beds as prepared , and maintaining the same for Two months by involving all the operations like multing, de-weeding , hoeing , forking, watering and application of chemical fertilizer, insecticides/pesticides etc. for the following trees/ plants (the pit shall be filled with fresh soil and manure, i.e as stacked at site,Digging holes in ordinary soil and carting away the excavated earth and refilling the holes with the fresh soil mixed with manure or in the ratio of 2 : 1 by volume the excavated earth shall be placed within premises at required place, rolling, levelling, watering and compaction etc. in required gradient complete as directed.Holes 1.2 m dia and 1.2 m deep Big Trees (The height of plant shall be considered as 8'-10’ and girth size 60mm-80mm). Albizia lebbek, Melea azedirach, Acacia auriculiformis, Dalbergia Sissoo, Emblica officinalis, Dalbergia Sissoo, Emblica officinalis, Azadirachta Indica, Bauhinia variegata, Pongamia pinnata, Butea monosperma, Bauhinia variegata, Cassia fistula, Erythrina indica, Terminalia bellirica, Terminalia arjuna, Commiphora caudata, Albizia saman, Bauhinia x blakeanea, Milingtonia hortensis, Roystonea regia, Caryota urens, Lagerstroemia speciosa, Tamarindus indica, Gliricidia sepium, Colviller racemosa, Alstonia scholaris, Delonix regina, Stercullia foetida, Klgellia pinnata, Senna siamea, Borassus flabellifer, Phoenix sylvestris, Tabebuia rosea, Hyphaene dichotoma, Holoptelea integrifolia, Spathodea companulata, Millingtonia hortensis, Alianthus excelsa, Bombax ceiba, Livistonia chinensis, Washingtonia robusta.

Planting the hedges/shrubs approx 10-12 plants per sq mtrs, border plants as mentioned below including making pits/trenches suitably to implant shrubs, including filling the fresh earth and manure and maintaining the same for Two months involving all the operations like multching , de- weeding ,hoeing, forking , application of chemical fertilizer ,insecticides / pesticides and trimming in proper shape.Digging holes in ordinary soil and carting away the excavated earth and refilling the holes with the fresh soil mixed with manure or in the ratio of 2 : 1 by volume the excavated earth shall be placed within premises at required place, rolling, levelling, watering and compaction etc. in required gradient complete as directed.Holes 0.15 m dia and 0.15 m deep. Shrubs approx 109580 nos. and 2'-3' height and girth size 8mm-12mm: Calotropis procera, Jatropha integerrima, Thevetia peruviana, Turnera ulmifolia, Stachytarpheta indica, Pseuderanthemum reticulatum, Senna alata, Pennisetum setaceum, Pennisetum setaceum rubrum, Cymbopogon citratus, Chrysopogon zizanioides, Saccharum munja, Carrisa congesta, Ruellia tuberosa, Barleria cristata, Bambusa tuldoides, Ixora singaporensis, Hamelia patens, Nerium oleander, Euphorbia milli, Leucophyllum frutescens, Ixora brachiata, Pandanus odoratissimus, Stachytarpheta jamaicensis, Calliandra haematocephala, Tabernaemontana 'Dwarf', Quisqualis Indica, Cliloria ternatea, Allamanda cathartica, Russelia quisetiformis, Schefflera arboricola, Acalypha hispida, Tecoma smithii, Malvaviscus penduliflorus, Pandanus baptistii

Planting saplings of ground covers in the proper beds as prepared , and maintaining the same for Two months by involving all the operations like multing, de-weeding , hoeing , forking, watering and application of chemical fertilizer , insecticides / pesticides etc. for the following trees/ plants (the pit shall be filled with fresh soil and manure, i.e as stacked at site,Digging holes in ordinary soil and carting away the excavated earth and refilling the holes with the fresh soil mixed with manure or in the ratio of 2 : 1 by volume . the excavated earth shall be placed within premises at required place, rolling, levelling, watering and compaction etc. in required gradient complete as directed.Holes 1.2 m dia and 1.2 m deep Ground Covers approx 246555 nos. and min. 6" height and girth size 5mm-8mm: Wedelia trilobata, Asparagus sperengeri, Jacquemontia violacea, Senecio orange, Asystasia gangetica, Ficus repens, Setcresea purpurea, Tradescantia spathacea

Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 2.7 m complete as per direction of Officer-in-charge

Sloping Vertical Green Wall - Providing and laying of Multiflixx grass pavers in 589mm*1156mm*40mm size panels. Rate includes fixing them using anchor fasteners of approved make for required stability. A total of approx 4 fasteners per sqm to be used. Multiflixx Grass Pavers to be made of recyclable HDPE in black colour with approximate fill volume of 21 litres/sq.m. Make: Ritter Landscaping, Germany.

Sloping Vertical Green Wall - Garden Soil: Providing and filling a mixture of Red Poyta soil and organic manure (4:1) upto 40mm depth for Mexican Lawn inside Multiflixx Grass Pavers providing mulch cover as per the drawing.

Sloping Vertical Green Wall - Providing and planting of specified Mexican lawn in a mixture of Red Poyta soil and organic manure (4:1) on top of grass pavers. Quantity includes entire Grass Pavers area. Rate to include for all grass cost, transport, soil preparation, installation, labour, disposing the surplus earth, ,., all complete. Organic fertilizers and pesticides are to be used as required/directed.

Providing Supply,Installation,Testing,Commissioning Pop Up Sprinkler-4" SAM, with Rotary Pattern Adjustable Arc, Radius upto 6 mtr Make: Rainbird / Nelson / Toro

Providing Supply,Installation,Testing,Commissioning Pop Up Sprinkler, (5" Pop Up hight from Bottom to Centre of Discharging Nozzle) from (8 to 14 Mtr Redius) with Check Valve, Slip Clutch Mechenism complete with required nozzle, Gear Driven Adjustable Arc Make: Rainbird / Nelson / Toro

Providing Supply,Installation,Testing,Commissioning Pop Up Sprinkler, (5" Pop Up hight from Bottom to Centre of Discharging Nozzle) from (12 to 22 Mtr Redius) with Check Valve, Slip Clutch Mechenism complete with required nozzle, Gear Driven Adjustable Arc Make: Rainbird / Nelson / Toro

Providing Supply,Installation,Testing,Commissioning Swing Joint 1/2" or 3/4" with Arm length, 30cm and 4 elbows Make: Rainbird / Nelson / Toro

Providing Supply,Installation,Testing,Commissioning Swing Joint 1", with arm length 30 cm, 4 elbows, rigid pvc body Make: Rainbird / Nelson / Toro

Providing Supply,Installation,Testing,Commissioning Saddle PP, Clamp with co-polymer with zinc chromed Nut Bolts, NBR gasket, suitable for pressure upto 10kg/cm2 Make: Astore / GF+ / Hidroten

Drip Lateral, Knick Resistant, 16mm with wall thickness upto 1.2 mm, Brown, with inline dripper of 3.5 lph having CV with required fittings Make: Metsar Plast / Netafim / Rainbird

Providing Supply,Installation,Testing,Commissioning Drip Lateral, Knick Resistant, 16mm with wall thickness upto 1.2 mm, Brown, with online dripper of 8lph with required fittings Make: Metsar Plast / Netafim / Rainbird

Providing Supply,Installation,Testing,Commissioning Lateral Hold Stake, 9". MOC: GI Hot Deep Make: STD

Providing Supply,Installation,Testing,Commissioning PVC Pipe as per IS: 4985, 110mmX6 Kg/cm2 with required fittings Make: Supreme / Finolex / Astral

Providing Supply,Installation,Testing,Commissioning PVC Pipe as per IS: 4985, 090mmX6 Kg/cm2 with required fittings Make: Supreme / Finolex / Astral

Providing Supply,Installation,Testing,Commissioning PVC Pipe as per IS: 4985, 075mmX6 Kg/cm2 with required fittings Make: Supreme / Finolex / Astral

Providing Supply,Installation,Testing,Commissioning PVC Pipe as per IS: 4985, 063mmX6 Kg/cm2 with required fittings Make: Supreme / Finolex / Astral

Providing Supply,Installation,Testing,Commissioning PVC Pipe as per IS: 4985, 050mmX6 Kg/cm2 with required fittings Make: Supreme / Finolex / Astral

Providing Supply,Installation,Testing,Commissioning PVC Pipe as per IS: 4985, 040mmX6 Kg/cm2 with required fittings Make: Supreme / Finolex / Astral

Providing Supply,Installation,Testing,Commissioning uPVC Pipe 4" X Sch 40 as per ASTM: 1785, with required fittings Make: Supreme / Finolex / Astral

Providing Supply,Installation,Testing,Commissioning uPVC Pipe 2" X Sch 40 as per ASTM: 1785, with required fittings Make: Supreme / Finolex / Astral

Providing Supply,Installation,Testing,Commissioning uPVC Pipe 1.5" X Sch 40 as per ASTM: 1785, with required fittings Make: Supreme / Finolex / Astral

Providing Supply,Installation,Testing,Commissioning uPVC Pipe 1" X Sch 40 as per ASTM: 1785, with required fittings Make: Supreme / Finolex / Astral

Providing Supply,Installation,Testing,Commissioning uPVC Pipe 3/4" X Sch 40 as per ASTM: 1785, with required fittings Make: Supreme / Finolex / Astral

Providing Supply,Installation,Testing,Commissioning PVC Ball Valve, 63mm - Double Union Make: Astore / Plasson / Hidroten

Providing Supply,Installation,Testing,Commissioning Valve Box 10" Make: Rainbird / Carson / SAB

Providing Supply,Installation,Testing,Commissioning 4" and 3" Butterfly Valve Assembly with flanges and accessories Make: Zoloto / Flow serve / Astore

Providing Supply,Installation,Testing,Commissioning Air Release Valve, 1" - Double Acting with glass reinforced body, PN 10, side orifice to avoid dirt insertion Make: Bermad / IV / GF

Providing Supply,Installation,Testing,Commissioning Quick Coupling Hydrant Assembly with Saddle and Riser Make: Harit / Equivalent

Providing Supply,Installation,Testing,Commissioning Quick Coupling Key and Elbow Make: Harit / Equivalent

Providing Supply,Installation,Testing,Commissioning Valve Box 7" with slit of size 2" with sovel access, corrugated sides for strength, inter locking feature Make: Rainbird / Carson / SAB

Providing Supply,Installation,Testing,Commissioning Pump Unit with required VFD Panel, Pressure Tank, Header Assembly and other required fittings and accessories with 1W+1SB Pump Make: Lubi / Grundfos / ITT

Providing Supply,Installation,Testing,Commissioning Automatic Filter Unit with self cleaning mechanism with pressure difference with required accessories Make: Amiad / Rainbird / Azud

Providing Supply,Installation,Testing,Commissioning Pressure Release Valve, 2" Make: Bermad / Equivalent

Providing Supply,Installation,Testing,Commissioning Electrical Cables, Conduits, Panel Box etc Make: Polycab / RR / Finolex

Providing & laying UPVC pressure pipes of 10Kg/Sq.cm pressure rating class V (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead up to 100m complete, compaction and consolidation Including sand bedding all around UPVC pipe & fittings and thrust blocks at bends as per standard design. (For Gardan Hydrant System)(Make:Astral,Ahirvad,Finolex) 25 mm outer dia

Providing & laying UPVC pressure pipes of 10Kg/Sq.cm pressure rating class V (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead up to 100m complete, compaction and consolidation Including sand bedding all around UPVC pipe & fittings and thrust blocks at bends as per standard design. (For Gardan Hydrant System)(Make:Astral,Ahirvad,Finolex) 32 mm outer dia

Providing & laying UPVC pressure pipes of 10Kg/Sq.cm pressure rating class V (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead up to 100m complete, compaction and consolidation Including sand bedding all around UPVC pipe & fittings and thrust blocks at bends as per standard design. (For Gardan Hydrant System)(Make:Astral,Ahirvad,Finolex) 40 mm outer dia

Providing & laying UPVC pressure pipes of 10Kg/Sq.cm pressure rating class V (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead up to 100m complete, compaction and consolidation Including sand bedding all around UPVC pipe & fittings and thrust blocks at bends as per standard design. (For Gardan Hydrant System)(Make:Astral,Ahirvad,Finolex) 50 mm outer dia

Providing & laying UPVC pressure pipes of 10Kg/Sq.cm pressure rating class V (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead up to 100m complete, compaction and consolidation Including sand bedding all around UPVC pipe & fittings and thrust blocks at bends as per standard design. (For Gardan Hydrant System)(Make:Astral,Ahirvad,Finolex) 63 mm outer dia

Providing & laying UPVC pressure pipes of 10Kg/Sq.cm pressure rating class V (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead up to 100m complete, compaction and consolidation Including sand bedding all around UPVC pipe & fittings and thrust blocks at bends as per standard design. (For Gardan Hydrant System)(Make:Astral,Ahirvad,Finolex) 75 mm outer dia

Providing and supplying of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the central taxes, departmental stores etc. complete.(ID Dia) 150mm Dia

Providing and supplying of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the central taxes, departmental stores etc. complete.(ID Dia) 200 mm dia

Providing and supplying of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the central taxes, departmental stores etc. complete.(ID Dia) 250 mm dia

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes /UPVC /DWC Pipes including bed concrete as per standard design a)150 mm dia

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes /UPVC /DWC Pipes including bed concrete as per standard design b)200 mm dia

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes /UPVC /DWC Pipes including bed concrete as per standard design c)250mm dia

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including 500mm x 450mm C.I. horizontal grating wih frame complete. (upto 10 ton)

Constructing Brick masonry road gully chamber 450mm x 450mm x 775mm with vertical gating complete.

Constructing brick masonry road gully chamber 11 OOmm x 775mm including 500mm x 450mm (C.I. horizontal grating with frame and vertical grating complete.) (upto 10 ton)

Supply , Installation , testing and commisioning of Modular type Recharge wells with considering below line item : Drilling of Recharge wells: The Recharge well will be 10“diameter with depth of 50 Mtr. Injection well insertion pipes: UPVC Pressure Pipe (IS-4985-2000 ) 6” diameter having a load capacity of 10 kg/ sq.cm. ( 20 Mtr ). Injection well insertion slotted bore well pipes 6" for clog resistant of rain water and reducing possibility of carrying solid. (35 mtr ). Solvent & Screws,Clamps, Bell Plug, End Caps and Bentonite for development of recharge well. ( 1 LOT ). Gravel filling for packing of empty space in the bore for stability to the inserted pipes. ( 5 Cum ). Earth work excavation with JCB/ excavators in all type of soil. (150 cum ). Dressing of pits excavated in step for installation purpose inside and Compaction. ( 50 cum ). Material for prepration of Pit base (gravel/stone chips and river sand) (20 cum ). Backfilling of Excavated soil with levelling. ( 100 cum ). Disposal of Soil up to 0.5 KM from the site. ( 50 cum ). Supply of long fiber Geotextile of weight 400gsm/sqm, type tested as per relevant international standards for tear, tensile strength, elongation %, puncture and percolation parameters, to act as a filter medium, including overlapping at joints and welding with extrusion welder etc. complete as per approved design. ( 150 Sqm ). Providing in possition recycled co-polymer modular Rain water harvesting struture with required number of large plate (685*410 mm, weight not less than 850 Gram ) and small plate (430*410 mm, weight not less than 535 Gram) with +-1% so as to ensure 96 % void volume ratio fixed in arrangements as per specified pattern/design. Four Plate (Small) configuration. Material used is 100% recycled co-polymer. Design of the modules (Large and small plates) is based on water molecule Structure. ( 50 Cum ). Supply of FRP filters de-silting suspended solid catcher and strainers including bucket of SS 304 grade with long fiber foam,filtration capacity 50 kiloliters per hour. (750 MM Dia) - 1 Nos . Supply of FRP Riser. (750 MM Dia)- 1 Nos. Assembling & Installation of Modular Rain Water Harvesting Structure with wrapping of Geotextile outside the Modular Tank and Connections of Filter. ( 50 Cum ). Disilting Chamber 1.0m*1.0m*1.0m ( Depth as per invert level ) -1 NO.(Make:LifeGreen System,Ecoaqua)

RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store or at site of work precast RCC M.200 Frame & cover suitable to drainage M.H. and as per type design & Drawing including cost of reinforcement M.S.Angles or Flat, curing mold work etc. heavy Duty 500mm Opening(frame)

RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store or at site of work precast RCC M.200 Frame & cover suitable to drainage M.H. and as per type design & Drawing including cost of reinforcement M.S.Angles or Flat, curing mold work etc. heavy Duty 500mm Opening(Cover)

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board having IP-64 protection made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection, supplied switch gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket complete. The Panel shall be painted with epoxy powder coating. (The rates includes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following approved manufacturers as per attached SLD - MAIN LT PANEL (as per attached Single Line diagram)

TYPICAL LIGHTING PANEL-1 (Specification as above & as per attached Single Line diagram)

Surge Protection Devices (SPD) Supplying, Assembling, levelling, connecting & testing following VSPs etc in boards as specified in 8.1, 8.2 & 8.3 1.4KV Protection level FP ,Class 'I', (Imax-40KA, 8/20µS) LEGRAND Cat no. 3938 or Equivalent

1.2KV Protection level FP, Class 's', (Imax-15KA, 8/20µS) LEGRAND Cat no.3943 or Equivalent

1.2KV Protection level DP, Class 's', (Imax-15KA, 8/20µS) LEGRAND Cat no. 3941 or Equivalent

Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current rating up to 250A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only with Sheet metal Enclosure

Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current rating up to 400A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only with Sheet metal Enclosure

Providing and erecting metallic vitrified danger notice board for MEDIUM VOLTAGE installation to be erected as per IS.

Providing and erecting metallic vitrified danger notice board for HIGH VOLTAGE installation to be erected as per IS.

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as directed.

Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground.

Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & also on both sides with covering of 7. 5 Cms. layer of sand above & below cable (16 bricks per meter)

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size. (J) 4 core 2.5 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size. (J) 4 core 4 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size. (J) 4 core 6 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size. (J) 4 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(a) 4 core 2.5 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(a-1) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(B) 4 core 6 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables(c) 4 core 10 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables(d) 4 core 16 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (A-1) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (B) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables(C) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (D) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (E) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (F) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (G) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (H) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (I) 3 1/2 core 300 Sq.mm ( 150 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (J) 3 1/2 core 400 Sq.mm ( 185 Sq. mm 1/2 core)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 4 core 4 Sq. mm / 4 core 2.5 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 3 & 1/2 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (B) 3 & 1/2 core 35/50 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (C) 3 & 1/2 core 70 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (D) 3 & 1/2 core 95 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 3 & 1/2 core 120 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (F) 3 & 1/2 core 150 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (G) 3 & 1/2 core 185 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (H) 3 & 1/2 core 240 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (I) 3 & 1/2 core 300 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (4) 3 & 1/2 core 400 Sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with following sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size : 4 wire 4 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with following sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size : 4 wire 6 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size : 4 wire 10 sq. mm

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following type of erection.2) For erecting concealed in RCC / Brick wall/slab or Open along with continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the surface to match the wall/ceiling. Supply and laying of 25 mm rigid PVC pipe of 1.6-1.8 mm thickness

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following type of erection.2) For erecting concealed in RCC / Brick wall/slab or Open along with continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the surface to match the wall/ceiling. Supply and laying of 32 mm rigid PVC pipe of 1.6-1.8 mm thickness

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following type of erection.2) For erecting concealed in RCC / Brick wall/slab or Open along with continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the surface to match the wall/ceiling. Supply and laying of 40 mm rigid PVC pipe of 1.6-1.8 mm thickness

Providing & laying ISI marked Rigid PVC pipe having 6Kg / cm2 (Class-3) to be erected at road crossing on or floor as directed for laying of cable. The pipes as following size of dia & weight per 6 mtr. (B) 50 mm Dia. (2.5Kg/6RMT)

Providing & laying ISI marked Rigid PVC pipe having 6Kg / cm2 (Class-3) to be erected at road crossing on or floor as directed for laying of cable. The pipes as following size of dia & weight per 6 mtr. (D) 75 mm Dia (5.5 Kg / 6RMT)

Providing & laying ISI marked Rigid PVC pipe having 6Kg / cm2 (Class-3) to be erected at road crossing on or floor as directed for laying of cable. The pipes as following size of dia & weight per 6 mtr. (E) 90 mm Dia (8.0 Kg / 6RMT)

Supply,installation, testing and commisioning of IP-65 3-6W LED Foot light with die cast aluminum die cast powder coated housing, reflector with LED lamp and driver.Make : Trilux, Wipro, Philips, K-Lite

Supply,installation, testing and commisioning of IP-65 -IK 07 ,16W LED Bollard light with die cast aluminum die cast powder coated housing, reflector,with LED lamp and driver.Make : Trilux, Wipro, Philips, K-Lite

Supply,installation, testing and commisioning of IP-67 3-3W LED Ground burriel light with with SS housing, Heavy Duty with One side light throw reflector with LED lamp and driver.Make : Trilux, Wipro, Philips, K-Lite

Supply,installation, testing and commisioning of IP-67 3-3W LED Ground burriel light with with SS housing, Heavy Duty with Two side light throw reflector with LED lamp and driver.Make : Trilux, Wipro, Philips, K-Lite

Supply,installation, testing and commisioning of IP-65 12W LED Spike light with die cast aluminum 300 mm long spike, powder coated housing, reflector, toughened glass cover with LED lamp and driver.Make : Trilux, Wipro, Philips, K-Lite

Supply,installation, testing and commisioning of IP-67 6W LED Shrub light with die cast aluminum, powder coated housing, reflector, toughened glass cover with LED lamp and driver.Make : Trilux, Wipro, Philips, K-Lite

Supply,installation, testing and commisioning of IP-67 12W LED Tree Up-light with die cast aluminum, powder coated housing, reflector, toughened glass cover with LED lamp and driver.Make : Trilux, Wipro, Philips, K-Lite

Supply,installation, testing and commisioning of 72W LED Wall washer. IP65. 24V DC. With IP67 rated LED driver, powder coated housing, reflector, toughened glass cover with LED lamp and driver.Make : Trilux, Wipro, Philips, K-Lite

Supply,installation, testing and commisioning of IP-65 1W LED MICRO LED Floor recessed inground, powder coated housing, reflector, toughened glass cover with LED lamp and driver.Make : Trilux, Wipro, Philips, K-Lite

Supply,installation, testing and commisioning of 9X2W LED Underwater light fixture. IP68, SS 316 body, With IP67 connector, toughened glass cover with LED lamp and driver.Make : Trilux, Wipro, Philips, K-Lite

Supply,installation, testing and commisioning of 4.5 Mtr GI Light Pole with IP-65 2 Nos, 45W LED Each LED Spot light with die cast aluminum, powder coated housing, reflector, toughened glass cover with LED lamp and driver.Make : Trilux, Wipro, Philips, K-Lite

Supply,installation, testing and commisioning of 4.5 Mtr GI Light Pole with IP-65, 2 Nos, 24W LED Each LED light with die cast aluminum, powder coated housing, reflector, toughened glass cover with LED lamp and driver. Fixtures locateda at different Height, Make : Trilux, Wipro, Philips, K-Lite

Supply,installation, testing and commisioning of IP-67 18W LED Tree Up-light with die cast aluminum, powder coated housing, reflector, toughened glass cover with LED lamp and driver.Make : Trilux, Wipro, Philips, K-Lite

Supply,installation, testing and commisioning of 9W/Mtr. LED Neon Flex. IP65, Make : Trilux, Wipro, Philips, K-Lite

Providing M-20 / 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the pole of size 45 x 45 x 100 cms. Deep in below ground level with plinth of 45 cms x 45 cms (or 45 cms dia x 45 cms) high upper ground level with necessary curing and finishing in approved manner. ( for 4 & 6 mtr pole)

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. (c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in normal soil. Length of Pipe : 3.00 mtrs Back filling Compound :2 nos Bags of 25 Kg.

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using copper clamp.

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.

Supply installation testing and commissioning High Speed quick power charging station for Electrical vehicle as per standard voltage rating with 40A FP MCB and 2 Nos 6A power plugs, it should have digital screen and all parameter recorders.

Supplyinhg certified, trained 2+Year Experienced / Electrician man-power for the Monthly Basis for 1st Year Scope of work to Operate & maintnance of the following Work HT VCB Panel, RMU, Transformer, Lt Panel, Cables, DB, MCB, MCCB, Capasitor, Light Fixtures, Fire Alarm Panel, Smoke-Heat Detector, HVAC System cable work, Light Pole, Facade Lighting, Data-TV-Telephone network and Equiment etc

Supplyinhg certified, trained 2+Year Experienced / Electrician man-power for the Monthly Basis for 2nd Year Scope of work to Operate & maintnance of the following Work HT VCB Panel, RMU, Transformer, Lt Panel, Cables, DB, MCB, MCCB, Capasitor, Light Fixtures, Fire Alarm Panel, Smoke-Heat Detector, HVAC System cable work, Light Pole, Facade Lighting, Data-TV-Telephone network and Equiment etc

Supplyinhg certified, trained 2+Year Experienced / Electrician man-power for the Monthly Basis for 3rd Year Scope of work to Operate & maintnance of the following Work HT VCB Panel, RMU, Transformer, Lt Panel, Cables, DB, MCB, MCCB, Capasitor, Light Fixtures, Fire Alarm Panel, Smoke-Heat Detector, HVAC System cable work, Light Pole, Facade Lighting, Data-TV-Telephone network and Equiment etc.

Supplyinhg certified, trained 2+Year Experienced Electrician man-power for the Monthly Basis for 4th Year Scope of work to Operate & maintnance of the following Work HT VCB Panel, RMU, Transformer, Lt Panel, Cables, DB, MCB, MCCB, Capasitor, Light Fixtures, Fire Alarm Panel, Smoke-Heat Detector, HVAC System cable work, Light Pole, Facade Lighting, Data-TV-Telephone network and Equiment etc.

Sarjan Construction Pvt Ltd

D B INFRATECH